Read empty return Sets

Similar Questions

• restore data on lexar memory stick (I removed dangerously, it now reads empty - AGGG)

  new lexar folding MemoryStick

  I removed w/out 'Remove' as it was in a computer that had been dead, and I couldn't get it to power upward.

  When I inserted in another computer Lexar now reads "empty" which means I lost?  all the data?

  Someone knows how to rejuvenate it? Correct that I broke?

  Hello

  Perhaps this will help you get back them.

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin, digital
  map of the camera or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I send a text, it reads delivered, then read and return to delivered.

  I sent a text to my iphone to another iphone and my phone said, delivered, read, and then return to delivered. Why?

  Fact they read my text then delete my message?

  I had the same problem for over a month now. Message will tell read for maybe a half hour or so and then it will say delivered again. If I send a message at night and no one reads it til morning whether or not I have no idea if they read. Really annoying and inconvenient. Difficulty please!

• NI9219 - Possible to read a single sample per read? (ADCTimingMode set to high frequency)

  I'm trying to collect samples every 0.1 second to a NI9219.

  I put in place, and then convert a DAQ Assistant code, because I had to change the AI. ADCTimingMode at high speed. Sampling frequency is set to 10 Hz, and read samples have the value 1. It's in a while loop. However, each iteration of the loop is back 10 samples each one second, not 1 sample per 0.1 second.

  The screws are attached if it helps, LV2011 format.

  Thanks in advance to those who take stabbed to enlighten me as to why it is!

  ACK, the entry 'number of sample' of the DAQmx Read VI had wired upward inadvertently. Do not take into account!

• I installed a new driver for CD/DVD; TSSTcorp CDW/DVD TS - L - 462 was of... CD/DVD Driver.but it does not read empty CD or DVD. It is said that there is no disc in the drive.

  After I install TSSTcorp CDW/DVD TS - L - 462 A ATA device of... CD/DVD drive, I played a cd & he played the cd. After I tried to back up my laptop, I was told to "put a DVD selected", so I did it, but it does not reconise dvd I set, so I put in a blank dvd, & press "use a dvd blank." but he did not read.  It keep saying "install an accessible dvd writable", or "there is no cd or dvd in the drive," what is happening please help.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Data being read empty CD.

  A disc that Windows Me recognizes and autoruns is read by Vista as being empty.  Help please!

  Hello

  Please answer these questions so that we can better help you. We need more information to resolve problems on your question.

  a. what type of files are there on this data CD?
  have b. you been able to use this data on vista CD earlier without any problem?
  c. you are able to use any other CD that have been created using Windows ME?
  d. recently, did you do any hardware/software changes for the computer?

  Check whether you can open these CDs on any other windows vista or XP computer.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to read file returned by the file picker

  I'm going to obviously stupid here, but for the life of me I can't figure out how read in a text file returned by the file picker.  I am currently getting the good full path of the file in the file picker but where do I go from here?  BlackBerry.IO.file does not seem to exist in Blackberry 10 and I'm confused as to how I would use the HTML5 File API from only a file returned by the file picker path.

  Can someone please spit out a quick and dirty example showing me the rudiments of reading in the data file from a path returned by the file picker, please?

  Thank you very much

  DM

  Don't know if you have the path to the file, and then you left there. One thing to note. The file MUST be inside you bar (sandbox) OR you need to add the <> ermit > access_sharedermit >
  and then he can live the file in the shared folder on the device.

  Here is a code that you can use to read a file. I poached it our docs found here:https://developer.blackberry.com/html5/apis/blackberry.io.html

• Need to replace the drive but not allowing OpenManage not not fault reader must be set to 'offline '.

  Hello

  We hope a quick and easy solution to what I'm procrastinating at the moment.

  Have a server Poweredge 1800 (PERC 4/SC, RAID5) and got a failure on one of the SCSI drives. It's hot and we got the replacement.

  However, OpenManage is not let me put the failed drive to 'offline' so that I can share. I'll choose the option offline in the menu drop down and when running it just empty screens (see photo). Is this a symptom of something not quite right? No problem with other options (blink/unblink).

  If not can I just start in the PERC menu, set the active player in offline mode, swap, set the new drive to rebuild from there?

  Seems to be a split view when I look at other similar questions on other threads in forum, for example, some say that you should just pull the drive and Exchange even without putting off line first.

  Thank you

  Alex

  

  Alex,

  It is possible that you are using an older version of the OMSA or that the controller is out of date.

  With the drive is not going offline. What you can do is to the server once it is off, then remove the disc. Powered with nothing in this niche, the table should show that degraded. Insert the replacement drive and it should start to rebuild.

  Let me know how it goes.

• Add empty return at the end of the story

  Hi experts

  How to make a script to add a few back empty at the end of the story, not the end is a table without return?

  Thank you

  Respect of

  John

  Hello

  You can target the PointInsertion last object in any object of the unique history of the document and then fill the carriage return:

  app.activeDocument.stories.everyItem().insertionPoints[-1].contents = "\r";
  

  HTH,

  Loïc

  http://www.ozalto.com

• Get an empty result set but not null

  Hello
  
  I try to get all the rows in a table, it's inside a database to ORACLE 10 g using JRE 1.5.
  
  The connection is made.
  When I do executequery, it works well (whitout exceptions), the problem is that I'm a non-null result set, but it is empty.
  When I run the query directly in SQLDeveloper, sqlplus and TOAD he recover 12 rows, in this case I did not error in the search criteria and the query syntax is correct.
  
  Please helpme with a few suggestions or references.
  
  CRGM

  Your the log output does not show this line
  >
  If (rs! = null) {}
  System.out.println ("CRGM: is not null" "");
  >
  You said initially
  >
  the problem is that I'm a non-null result set, but it is empty
  >
  But if it was true we output the log to the top line.

• How to read the memory set on FPGA in Application of the RT?

  I use the NI9403 DIO module on chassis cRIO-9111 alongwith cRIO-9024 controller RT.

  I've defined a "Variable" (memory location) of FPGAS which would be written in FPGA VI. The result of the logic generated from the different digital inputs would be recorded in this variable.

  I want to read the value stored in this variable in RT VI.

  What is the procedure/sequence of read this variable in the application of the RT... ?

  You will need to create a KPI for your main FPGA VI front panel and use a loop to write your memory to this indicator.  The indicator can then be read with your RT VI using the FPGA read/write control method.

  The memory of the FPGA is internal to the chip and cannot be accessed from the outside of the FPGA code.

• System restore calendar is empty, cannot set new points and cannot use Windows help.

  Original title: registry problem affecting system restore etc.

  The system restore calendar is empty, I can't put new points, and I can't use Windows help because I can not type in the dialog box. If the problem is described in the doc #313853, the solution he proposed did not. Defeating my cleanups registry also seems not to help. Any suggestions?

  To all of you who have tried to help me with this problem, I recently came across a solution - I had to reinstall Internet Explorer, which I think had been compromised by my registry cleaner. I never use, so it didn't occur to me that there is something wrong with it. But that seems to have fixed all the problems.

• all the CDs that I burn come empty return

  last month I was able to burn a cd, but now every time I burn a cd my cpu goes through the whole process of combustion, but when I play the they all empty!

  You may have a hardware problem with your burner
  but the free CDBurnerXP may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP / Vista / 7)

  FWIW: You can skip the Setup Wizard and
  Download the complete file on your hard disk before
  installation on the left by clicking on the "Download Standard" text.

  When installing... don't forget to uncheck the options you
  do not want on your system.

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  CDBurnerXP create an MP3 disc
  http://CDBurnerXP.se/help/audio/mp3cd

  CDBurnerXP create data disc
  http://CDBurnerXP.se/help/data/compiledata
  (the green bar at the bottom of the screen
  turns red if you add too many files)

• Adobe Reader 11 Rollout - Set 'Import' certificates so that the user does not

  Hello

  My company, which has 1800 + users, is upgraded to Adobe Reader 10 for Adobe Reader via SCCM 2012 11.0.04.  I created a package using the Adobe Customization Tool, and everything works as expected, with the exception of the security prompt that appears at first launch of import certificates.  I tried to use a tweak registry to disable verification, but that doesn't seem to work, but after some thought rather security would select "Import" to the first launch, without intervention of the user, if possible.

  Is this possible?

  Thank you

  Rich

  I ended up doing this

  REM move files locally

  Mkdir "c:\apps\Adobe_Reader_11004."

  xcopy /s /e /i "\\servername\package_source\Adobe\Reader\11.0.04\Custom Installer" "c:\apps\Adobe_Reader_11004."

  REM install AR11

  'c:\Apps\Adobe_Reader_11004\setup.exe '.

  REM move files of certificates to prevent importation popup on first launch

  xcopy /s /e /i "C:\Users\%username%\AppData\Roaming\Adobe\Acrobat\10.0\Security\*.acrodata" C:\Users\%username%\AppData\Roaming\Adobe\Acrobat\11.0\Security"\ «»

  And the popup did not come to the top for the first two criteria.  I'll wrap up in SCCM and try again, but I think it's good to go.  Changes to the registry Clreaed out of my custom install since it was garbage.

• Impossible to install Acrobat Reader after returning from 10 Windows to Windows 7

  Hi, I tried all kinds of solutions to reinstall Acrobat Reader after you have reinstalled Windows seven. I get a message saying that the AcroRead.msi path is not available. I tried to use the cleaning tool and remove the Data/Adobe/Setup program and full of numbers, but it comes back!

  Help please!

  Hi and thanks for your response. I finally found a solution for download Winfix and to regulate the installation and uninstallation problem.

  The message that I continued to receive was the path to AcroRead.msi wasn't available.

  THX.

  Sent from my iPad