Data for the graph economy waveform

Similar Questions

• dispplaying data on the graph of waveform inside/outside while loop

  I create a vi using the random number generator, entering the number in the function(express>>arithmateic>>maths>>trig>>sine) fishing and connect the output of the function sine waveforms. Table of waveform show no problem. If I replace the with graphic waveform table, I get an error that the source type is differenct type of sink. I then put waveform chart outside loop everything hoping that tunnel would act as a table, but still I get the same error. I then put build table palette between all border and loop waveform graph which is placed outside the while loop. I get no error, but no data is displayed on the graph of a waveform. Theoretically, if I press stop I would see a distorted sine wave on the waveform graph, but this doesn't seem to be the case. I am wondering how to view data on the graph of a waveform in such cases!

  Thank you in advance for reading and help!

  See you soon

  First of all, you can take a part of the basis of LabVIEW tutorials.

  Since you need to work with a chart and it is the preferred method to display data point by point, I don't know why you try to use a chart. In any case, you cannot use all simply a table of generation because that would be just the result of the last iteration and your graph indicates it is a single point. If you activate autoindexing, then you get all the values, but not before the end of the loop. If you were to use a shift register and the build dashboard, you might place the graphic inside the loop, but then you would face performance issues that the table would grow uncontrollably.

• Type of input data for the graph waveform

  Waveform graphs do not change the type of input data according to the wire. When I create a new chart that is set to double data type and does not change what I connect to waveform, so I copy graphics to another VI for appropriate indication. But the graphics don't accept complex data. How can I change the type of input data?

  The graphics in vi you have posted behave properly on my machine.

  Change according to the type of data that connect you to them.

  Maybe something wrong with your installation?

• How to use a PDF form as a source of data for the second form PDF

  Hello world

  I have the following scenario:

  We want that our sales staff to collect data of our clients through a PDF form.

  We do not like to combine with the PDF we print them or sending them by E-Mail.

  Therefore, there is a solution to fill a second PDF with data from the first.

  1. 1 PDF form with input fields

  2. 1 PDF form must be registered with the entry

  3. 2nd PDF form with a table filled with 1 form data

  4. 2nd PDF form displays the data under the graph with the abilty to edit these data to dynamically change table

  I don't want a hollow guide the whole scenario. I just first of all whether it is even possible to supply a PDF form with data in another form PDF.

  If it is possible please give me advice to know what to look for everything.

  If this isn't the case, I would like to read the recommendations for solutions easy possible to solve this task.

  We do not want to send our staff of sales with PDF solutions to our clients, their collection and their work through a big pile of measures to manage this scenario.

  Thank you and regards

  Christian

  You must understand that there is a big difference between the JS, you might be familiar with (the one used in web pages) and one used in PDF files.

  Although the basic syntax is the same most of the objects and methods are different, as PDF files are fundamentally different from web pages.

  You can find the reference to API JS Acrobat here: JavaScript for Acrobat | Adobe Developer Connection

  The form data can be copied by exporting it to a file FDF then import this file into the other PDF (assuming that the field names are the same), or it can be done using a script that uses global variables. The latter is more automatic, but may require adjustment of the parameters of the application or using a function of confidence (IE, a feature that is installed on the local computer instead of just in the file itself).

  The first is easier to implement and use, but requires the intervention of the user.

• How do I remove the launch date for the safe in FF portable ESR 31

  How do I remove the launch date for the safe in FF portable ESR 31. Is it possible that - by pressing the SHIFT key when you launch firefox shows the option of safe mode - off and close the browser.

  See also:

  • http://Mike.kaply.com/2013/01/11/disabling-safe-mode-in-Firefox-17/

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• Could re: Anyone tell me the release date for the Toshiba Tecra S10-106

  Could someone tell me the release date for the Toshiba Tecra S10-106. What would be the estimated price for this model.

  Thank you

  I already posted this in your other thread on Tecra A10.

  On the Europe of Toshiba page-> Products->-> Tecra laptops, you will find a whole list of different series and Tecra models.

  Right now I find only the info that these phones will be available soon.

  You may need to wait a bit...

• Re: Release Date for the Tecra A10 - 18 p and A10 - 15 c

  Could someone tell me the release date for the Toshiba Tecra A10 - 18 p and A10 - 15 ° C. What would be the estimated price for these two models.

  Thank you

  I didn't find the release date of this laptop models.
  On the Europe of Toshiba page-> Products->-> Tecra laptops, you will find a whole list of different series and Tecra models.
  Right now I find only the info that these laptops will be available soon.

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• Release date for the RE7000 in Europe?

  Hello

  Quick question, no release date for the RE7000?

  http://www.Linksys.com/us/p/P-RE7000/

  Already register when available

  Thanks for your time,

  Hello. We do not yet have an official release date. We will post updates on our Web sites.

• How to create a date for the restoration of the system when there is no previous restore date.

  When you try to create an earlier date for the restoration of my pc (windows 8.1) for the first time (no previous restore point) the only option I get is to create point of restoration of the date and time of today. I need to restore to an earlier date. Does anyone have a solution?

  You can click on the box "Show more restore points" to view the older, but they may not be as reliable (they may fail to apply or they may not actually work).

  If you do not see the box to check, or the oldest, so it is not of the ancients still show.  If this is the case, you will need to use the 'Refresh PC'.

  

• Need to retrieve the data for the current date.

  Hello

  I have a table which then retrieves information when using this command.

  Select ta_acct, shift, created_on track_alerts;

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Technicolor A 24 March 14

  Manitoba telecom a 24 March 14 system

  Technicolor A 24 March 14

  I used this statement to retrieve the data for the given date.

  Select ta_acct, shift, created_on track_alerts where created_on = 24 March 14 ';

  Its not data recovery.

  Need help.

  Kind regards

  Prasad K T,.

  984002170

  Prasad K T wrote:

  Yes the created data type is date.

  CREATED_ON

  DATE

  Partha thanks it works now.

  Select ta_acct, shift, created_on in track_alerts where to move is: Shift and TRUNC (created_on) = TO_DATE('24-MAR-2014','DD-MON-YYYY');

  Still, I made a small change to my querry.

  Select ta_acct, shift, created_on track_alerts where to move is: shft and TRUNC (created_on) = TO_DATE (select double sysdate,'MON-DD-YYYY "");

  For this statement, it does not work.

  of course not...

  first: sysdate returns a date so no need of conversion here

  and

  second SYSDATE includes time, so your application should look like this:

  Select ta_acct, shift, created_on in track_alerts where to move is: Shift and TRUNC (created_on) = trunc (sysdate)

  or

  Select ta_acct, shift, created_on in track_alerts where to move is: shft and created_on > = trunc (sysdate) and created_on<>

  HTH

• Release date for the cc 2015 DPS

  Hi guys,.

  
  

  Is there a release date for the new Adobe Digital Publishing Solution? I tested the beta and its new features are amazing.
  

  Thank you

  July 29

• How to get the date for the first Monday of each month

  Dear members,
  
  How to get the date for the first Monday of each month.
  
  I wrote the following code
  
  SELECT decode (to_char (trunc (sysdate + 30, 'MM'), 'DAY'), 'MONDAY', trunc (sysdate + 30, 'MM'), NEXT_DAY (trunc (sysdate + 30, 'MM'), "LUN")) FROM DUAL
  
  But he looks at complex bith.
  
  Abhishek
  
  Published by: 9999999 on 8 March 2013 04:30

  Use the IW format - it will make independent NLS solution. And all you need is truncated 7^th day of each month using IW:

  select  sysdate current_date,
          trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
    from  dual
  /
  
  CURRENT_D FIRST_MON
  --------- ---------
  08-MAR-13 04-MAR-13
  
  SQL> 
  

  Here is the list of the first Monday of the month of this year:

  with t as(
            select  add_months(date '2013-1-1',level-1) dt
              from  dual
              connect by level <= 12
           )
  select  dt first_of_the_month,
          trunc(dt + 6,'iw') first_monday_the_month
    from  t
  /
  
  FIRST_OF_ FIRST_MON
  --------- ---------
  01-JAN-13 07-JAN-13
  01-FEB-13 04-FEB-13
  01-MAR-13 04-MAR-13
  01-APR-13 01-APR-13
  01-MAY-13 06-MAY-13
  01-JUN-13 03-JUN-13
  01-JUL-13 01-JUL-13
  01-AUG-13 05-AUG-13
  01-SEP-13 02-SEP-13
  01-OCT-13 07-OCT-13
  01-NOV-13 04-NOV-13
  
  FIRST_OF_ FIRST_MON
  --------- ---------
  01-DEC-13 02-DEC-13
  
  12 rows selected.
  
  SQL> 
  

  SY.

• Process to get Performance data for the managed entity c#

  Could someone please describe the process for pulling data from the API performance?  The documentation seems a bit muddled.

  Qustions:

  Should you create a custom interval perf or you can use the default settings?

  If I have a performanceManager MOR and a hostSystem MOR what methods should I call on the PerformanceManger object to retrieve the performance counters on the managed entity? I'm trying to get ready time % of a host.  Looks like I need to use the QueryAvailablePerfMetric method to draw the MetricID and then use the QueryPerf to shoot the actual static...

  Any help is appreciated.

  VirtualFisk

  You can use available perfIntervals to extract data.

  You have reason to extract performance data, you must first call QueryAvailablePerfMetric to get metricIds and then pass them in the appeal of QueryPerf.

  Also to check whether or not real-time data are available on the entity you must first call QueryPerfProviderSummary on entity and check the PerfProviderSummary currentSupported property. If she defined as true, real-time data are available and you can pass PerfProviderSummary refreshRate as intervalID in your QueryAvailablePerfMetric call and still pass this refreshRate as intervalID PerfQuerySpec for QueryPerf appeal.

  Please see following code snippet to retrieve data for the managed entity HostSystem (hostMoRef), you can replace it with a managed object of an entity reference

  
  
  
  
  
  
       int counterID;
  
  
              int key;
  
  
              String group;
  
  
              String name;
  
  
              String rollup;
  
              ManagedObjectReference pmRef = _sic.perfManager;
  
  
              PerfCounterInfo[] cInfo = (PerfCounterInfo[])getObjectProperty(pmRef, "perfCounter");
  
              Hashtable PerfByID = new Hashtable();
  
  
              for (int i = 0; i < cInfo.Length; i++)
  
  
              {
  
  
                  key = cInfo[i].key;
  
  
                  group = cInfo[i].groupInfo.key;
  
  
                  name = cInfo[i].nameInfo.key;
  
  
                  rollup = cInfo[i].rollupType.ToString();
  
  
                  Console.WriteLine("ID: " + key + "    group:  " + group + "." + name + "." + rollup);
  
  
                  PerfByID.Add(key, group + "." + name + "." + rollup);
  
  
              }
  
  
  
  
  
  
  
  
        Console.WriteLine("\n---------------------------------------------");
  
  
                      Console.WriteLine("Entity: " + hostMoRef.Value);
  
  
                      PerfProviderSummary perfSum = _service.QueryPerfProviderSummary(pmRef, hostMoRef);
  
  
                      Console.WriteLine("Refresh Rate" + perfSum.refreshRate + "\nCurrentSupported :"
  
  
                                        + perfSum.currentSupported + "\nisSummarySupported :" + perfSum.summarySupported);
  
                      Console.WriteLine("Fetching Perf Metric Ids");
  
                      DateTime curTime = _service.CurrentTime(_svcRef);
  
  
                      DateTime beginTime = curTime.Subtract(new TimeSpan(1, 0, 0));
  
  
                      DateTime endTime = curTime;
  
  
                      int intervalID;
  
  
  
  
  
                      if (perfSum.refreshRate < 0) {
  
  
                          intervalID = 300;
  
  
                      } else {
  
  
                          intervalID = perfSum.refreshRate;
  
  
                      }
  
  
                      intervalID = 300;
  
  
                      PerfMetricId[] Ids = _service.QueryAvailablePerfMetric(pmRef, hostMoRef, beginTime, false, endTime, false, intervalID, true);
  
                      if (Ids != null && Ids.Length > 0)
  
  
                      {
  
  
                          Console.WriteLine("Ids fetched from QueryAvailablePerfMetric API are:");
  
  
                          for (int k = 0; k < Ids.Length; k++) {
  
  
                              Console.WriteLine("ID is: " + Ids[k].counterId + " Instance is: " + Ids[k].instance + "Name is: " + PerfByID[Ids[http://k].counterId|http://k].counterId]);
  
  
                          }
  
                          PerfQuerySpec qSpec = new PerfQuerySpec();
  
  
                          qSpec.entity = hostMoRef;
  
  
                          qSpec.metricId = Ids;
  
  
                          qSpec.format = "csv";
  
  
                          qSpec.intervalId = intervalID;
  
  
                          qSpec.startTime = beginTime;
  
  
                          qSpec.startTimeSpecified = true;
  
  
                          qSpec.endTime = endTime;
  
  
                          qSpec.endTimeSpecified = true;
  
  
                          qSpec.maxSample = 1;
  
  
                          qSpec.maxSampleSpecified = true;
  
                          PerfQuerySpec[] qSpecs = new PerfQuerySpec[] { qSpec };
  
  
                          if (hostMoRef != null)
  
  
                          {
  
  
                              PerfEntityMetricBase[] perfEntity = null;
  
  
                              perfEntity = _service.QueryPerf(pmRef, qSpecs);
  
                              if (perfEntity != null && perfEntity.Length > 0)
  
  
                              {
  
  
                                  for (int i = 0; i < perfEntity.Length; i++)
  
  
                                  {
  
  
                                      PerfEntityMetricCSV pms = (PerfEntityMetricCSV)perfEntity[i];
  
  
                                      PerfMetricSeriesCSV[] vals = pms.value;
  
  
                                      if (vals != null)
  
  
                                      {
  
  
                                          Console.WriteLine("Perf Counters fetched");
  
  
                                          for (int vi = 0; vi < vals.Length; vi++)
  
  
                                          {
  
  
                                              PerfMetricSeriesCSV pmCSV = vals[vi];
  
  
                                              if (PerfByID[vals[http://vi].id.counterId|http://vi].id.counterId].ToString().StartsWith("mem.vmmemctl")) {
  
  
                                              Console.WriteLine("CounterId: " + vals[vi].id.counterId + " Name: " + PerfByID[vals[http://vi].id.counterId|http://vi].id.counterId] + " Instance: " + vals[vi].id.instance + " ----- ");
  
  
                                              counterID = vals[vi].id.counterId;
  
  
                                              //Console.WriteLine("Value in Map: " + PerfByID.get(counterID));
  
  
                                              Console.WriteLine("-------- Value : " + pmCSV.value);
  
  
                                              }
  
  
                                          }
  
  
                                      }
  
  
                                  }
  
  
                              }
  
  
                              else
  
  
                              {
  
  
                                  Console.WriteLine("Performance statistics not available for this entity!");
  
  
                              }
  
  
                          }
  
  
                      }
  
  
                      else
  
  
                      {
  
  
                          Console.WriteLine("Perf Metrics not fetched");
  
  
                      }