RESCUE AND RESTORE PROBLEM

Similar Questions

• How to remove rescue and restore back your data?

  I have many backup points on my laptop, several were made 2 years ago.

  How to delete these restore points backup obsolete outdated system?

  Thank you.

  go to the rescue and recovery under Start, program, thinkvantage. Then click on the advance tab and select backup detele, departure from the smallest to the largest.

• Backup and restore problems: your backup configuration is not valid. Please review your backup settings (0 x 81000029) Please try again.

  Original title: back up and restore the problem

  I'll give you a full explanation on what is my problem, so that it will make it easier to answer if all goes well. I use Windows Vista and decided it was time that I backed up my files. After clicking on the tab "back up files", I then got a dialog box asking "how many times you want to create a back up" so I chose "per week" on "Sunday" at 19:00. "There is a message that goes down"because it's your first backup, windowws will create a new, full backup now. However when I click on the 'Save settings and start backup' tab I get the message "file back up could not save your automatic backup settings for the following reason.

  Your backup configuration is not valid. Please review your backup settings (0 x 81000029) Please try again.

  Someone has an idea what is the problem?

  Hi frankspencer,.

  Step 1: You can follow the steps mentioned in the article below

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer

  http://support.Microsoft.com/kb/950167

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup and restore problem in Vista HP-64

  Try to restore from backup in Vista from USB drive external... get the backup the value indicated, but says the location is not available... yet Windows Explorer displays the player is here and shows the disk backup sets... How to restore?

  Hello

  The program used to back up the data on the external hard drive?

  Did you restore the files before sucessfully?

  First of all, make sure that you enter the location of backup to restore the files. Chances are that you might have entered the wrong drive whereby you are gettting this error meesage. If you have used backup and restore utility under Windows, go through the links below that will help you to restore files.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  How to manually restore the files backed up using Windows backup
  http://support.Microsoft.com/default.aspx/KB/970914

  Let us know if this helps

  Concerning
  Anthony.

• Rescue and recovery - problem with restore

  I think I know what the problem is but not how to fix...

  ThinkPad T61p running 64-bit Windows 7.  Replacing the hard drive, no recovery partition.  R & R to USB backup.

  I was diligent to make backups every week, but in September last my backup USB drive was almost full, so I bought a new.  I used R & R to prepare the new disk and which seems to work very well so I continued with my weekly backups sent to the new drive.  I got some of the files in the backup when I accidentally deleted them so I assumed everything was in good condition.

  I was wrong.

  A few days ago, I messed up my email and went to restore from my backup taken a few hours before.  Any attempt to have failed with an error message "the list box identifier was not found.  So, I tried a full system restore.  In point 40% it abandoned leaving the hard drive in a State that won't start plu, which could not be fixed with the repair tool on the Win7 installation DVD.

  I was able to restore a system from the old USB drive as dated September 8, 2012.  My problem is the missing 5 months of e-mail.  It is saved on the drive again, but I can't restore it.

  I have an idea what the problem could be, namely the absence of a "Basic" backup on the new drive.  Logical when you think about it, but of course, when you create the backup system I don't have.

  There is space on the new USB drive to copy over ALL the backups of the old drive, but I'm afraid of the farce of things even more.  I make images of two disks before you start fiddling with.  During this time I can't see in the RRBackups directory, at least on Windows 7.  I mounted the old drive on linux, and from there, I can look inside RRBackups.  There is a directory that contains what seems to be the 'Base' and another that holds incremental backups. I have not tried the same thing with the new drive, because it is always to be graphic.

  On each disk, there are a lot of empty directories with names long empty of meaning.  I have no idea this is.

  Incremental backups seem to live inside the numbered directories 1-32 (for example).  As I have not looked at the new USB I don't know if the numbering continues to 33 (in this example) or starts from 1.  I guess that things will be a little easier if the numbering does NOT start again from 1.  In this case, it may be possible to copy all the backups on the new drive.  Also maybe you can only backup "Core" is necessary.

  If anyone has any ideas or suggestions, then please respond.  The objective remains to get the files from e-mail from my latest backup (on the new USB.  I don't like anything else.

  This response will be shorter.

  (1) area of dreaded list.  Your recent incremental restore to EMAIL worked fine (Feb incremental 2013 had the file). NO error in list box.   When you wanted older files in this series, she had to return to base backup (05 dec 2012) list box-error.  The restore list made its way to the basis of searching for files. Restoring single files in the database fails with the message list box.  This basic restore also fails with the error message (rnr old or such).

  But you mixed and matched the base backups.  I'm glad you're current Email (your goal).

  HUmm. the new USB-based backup is suspicious. You have 4 ways to start RNR. Current C (windows platform), stand-alone C (PF11), Old usb, new boot usb boot.  Looks that all of your software startup RNR is 4.3. I don't understand how a backup and understand what liberation did the backup.  It's in France somewhere in there.

  To determine which software RNR boot on the USB, go to USB:\preboot\sysinfo\sinfo.exe and PROPERTIES, Details tab you can also start the USB and hit to help? button on the screen of the RNR. On option.

  I'm only interested in the RNR starting on new USB version. Please report it.  I'm not quite clear where you started the RNR when you tried to restore the 05 Dec. (pf11 or New boot usb used?).

  (2) something is not right on new usb (basic backup).  But your plan is to erase this. and c. current (large) backup. (so new boot RNR of the interface of media create).  For some strange reason, you think that your Base was taken with RNR (older or newer)... The base is not corrupted.  The start software does not match the backup file

  (3) blue ray RW.  It will be MUCH faster backup if you use blue ray R.

  ==

  Final summary:

  (1) another? How long have you used the NEW USB for backups? Do you have backups of vista on the new USB at a certain point in time?

  (2) my guess is that your NEW USB had rained stand-alone boot of RNR vista on it. (guess long shot). No bogus msg...

  (3) dec 05 backup log.

  Look in the new USB, new uuid,\Common\rr.log. This will document your backup 05 dec. But they do no release levels

  in there.

  (4) Blue Ray backup RNR. To the restoration of this set:

  Disc 1 is boot.

  Intermediate DVD are given.

  Finally, DVD, the table of contents. That is to say, Final.

  Restore, use DISK 1.  It will then ask for final load, and then back to DVD 2.

  (5) had been working on was some scans color corrections I did a couple of years there are movies xxx, beautiful.

  If your reset base seven 2012 did not, your 05 dec did not find it either.

  (6) I am honored to talk with you. Your work looks very good. I am a programmer to systems, LOL.

  Version numbers:

  Windows: 4.50.00.25.00

  Independent: 4.50.10.25.00

  Not much. They will not match.

  =

  Time to find the snake. I'm cooking grits. Laughing out loud. My best friend's MOTHER. She taught me a lot. Move. You have before.

• Windows Backup and Restore problem

  I have created an incremental backup for a while (since January) on a disk external drive plugged my USB2.0.

  Recently my computer crashed and I did a new install of Vista.
  After the update to Vista, I decided to restore my files from the outside.

  I did the restore advanced, and it finds all the files and the backup. But when I continue to make the effective restoration, it gives me a "the backup file is not found. Check your hardware configuration or restore from a backup different (0x8100001A). »
  I checked the permissions and all members have full control of everything.

  I also tried to change the drive letter, but no dice.

  The strange thing is that concludes the backup, and if I click on "Add files", he finds my backed up files! But when I proceed to restore, it only will not do.

  Any ideas?

  Hi OrangeL89,
   
  This problem can occur because the Mediaid.bin file is missing. The Mediaid.bin file may be missing if you move the backup directory to another location.
   
  If the backup directory is on a different drive or a different file share, and the original backup location is still available, follow these steps to resolve the problem:

  1. Search the root directory of the drive or the file share where the backup was originally stored.
  2. Copy the Mediaid.bin file.
  3. Locate the root directory of the location where the backup is currently stored.
  4. Paste the Mediaid.bin file.

     For example, if the original backup location is drive D and that the backup has been moved to the E drive, copy the Mediaid.bin file located in the root directory of drive D to the root directory of drive E.

  5. Try to restore another backup file.

  Alternatively, you can follow the article below:
   
  Error message when you use the option restore files to restore a backup file on a Windows Vista-based computer: "the restoration has not completed successfully. "Error code: 0x8100001A.
   
  http://support.Microsoft.com/kb/KB940263
   
  Hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Backup and restore problems.

  my computer has installed a program that do not have I turned off, I tried to uninstall it, but it didn't so I backed up my computer yesterday, but today it has begun to stop by itself without my permission he writes on the icon "windows must now restart because the DCOM Server process has been stopped, please what do you think I should do about this problem?

  Hi lemdy,

  Thank you for visiting the Microsoft Windows Vista Community.  Restart your computer and press the F8 key until you reach the Advanced Startup Options menu.  Select Safe Mode.  Once your computer Safe Mode, do a System Restore to a date prior to the installation of unwanted software.  You have an antivirus installed on your computer?  If this isn't the case, you can analyze your computer by using the Windows Live OneCare free PC safety scan.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lollipop update and restore problem

  I got a new replacement Z3C today under warranty after 3 episodes of sudden death.

  To restore my backup today and received the message "this back until a was performed on a version of the software that is more recent than the software on your device...". »

  Another thing, I noticed that he's stuck on kitkat 4.4.4 despite indicating the software is up-to-date.

  So this explains why my backup won't load as I was running before lollipop.

  I wouldn't usually be bothered so much, but I really enjoyed the new Sony Xperia movie Creater in lollipop.

  My old phone was a model of Singapore which has improved fine Lollipop, so I wonder if I missed something?

  Thanks in advance

  XDA or create your own and flash

• Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

  I have a Lenovo 3000 N200 sick who was running XP home. I could not start XP and can only access the Rescue and Recovery utility in the Lenovo recovery Partition that would be to rebuild the hard drive to factory settings IE. Windows XP with no data. I managed to copy the data using a Paragon backup cd and then made the fatal mistake of attempting a repair MBR, which was a very tempting option on the Paragon rescue cd. Now, not only it does not boot to XP, but I can run is even more Rescue and Recovery to reinstall XP which is the problem!

  If I boot with windows install disc and take the option recovery console it stops, statement that "recovery console could not find the hard drives connected to your computer. Setup cannot continue. "

  I was wondering if someone another backup MBR restore could help me with this?

  So, if someone has a Lenovo 3000 N200 work and is willing to try to save the MBR to send it to me, then please get in touch. It is probably useful to make a backup for yourself where the same problems happen to you!  In my view, there are a bunch of programs that backup the MBR for example MBRtool, MBRWizard and so on.

  Any ideas, offer accepted with gratitude.

  Yes I know I could buy the Lenovo recovery disk, but it is a matter of principle for me avoid paying £50 or so if I can avoid it! We'll see if we can help here...

  Thank you

  Simonides

  I am pleased Andyp!

  The solution was to set the primary partition to inactive and value the recovery partition Active, then restart and use the Lenovo Care button (now finally works) to access the function of recovery so I could return the laptop to factory State.

  No doubt there are plenty of ways to do it, but the approach I took to solve this problem is released under

  1. use another PC to download Paragon backup and restore (I actually used the trial edition now but the free edition may have a similar feature)

  2nd burn a CD bootable backup and recovery 10.0.

  3. start the CD Lenovo, and after a long wait, a menu should appear with 11 options, the first of them being Paragon backup and restore.

  4. Select Paragon backup and restore.

  5 select properties in the pick a task window and you will see two partitions, a big enough (in my case Go 143, called Preload) and the other is quite small (6 GB called SERVICEV001).

  Note: this is an opportunity brilliant to use the Back Up Partition option to make a backup on external drive USB of the two partitions as the reconstruction of the hard drive with Lenovo Care button you will lose all data.

  6 right-click the partition preloads and select Edit and set idle

  7. made the SERVICEV001 partition right click and select Edit and set the Active

  8 remove the backup and recovery of CD and put it somewhere safe

  9. restart the PC and Lenovo Care button (might be called something different) should now work, allowing you to restore the hard drive to factory settings which will erase all data of a personal nature. You did a backup?

  10 Windows should then start as usual, reinstall Paragon backup and restore, and restore your data.

  Finally, look at this as a lesson to

  (a) you get a writable DVD and use the Lenovo menu under windows to create a floppy disk from Lenovo rescue and recovery started.

  (b) use Paragon or equivalent to create copies of images of each partition and ordinary differential copies of the primary partition.

  I hope this will help other owners who have a hidden rescue for example partition. IBM and HP and would like to receive feedback.

  Finally, I must acknowledge assistance patient e-mail provided by Taisia Smirnova Paragon support by offering me this solution.

  best, Simonides

  (If you found this helpful please click on the star to give me a point Bravo!)

• Rescue and Recovery will restore all of the disk?

  I searched high and low for an answer to this question, but I'm not. I have use Rescue and Recovery to back up the drive of my laptop. If I have a problem of catastrophic disk, save and recovery will restore my entire drive to a new drive, including the service partition? I have a fully functional and updated disc to date after a full restore? (Guess that I restore using a floppy disk to boot Rescue and Recovery, which have I already have.)

  Well, I decided that I have a couple of hours on my hands and a fresh backup using rescue and recovery (in order to test whether or not he backs up the recovery partition) and a Windows Vista "complete PC Backup" (in this case that it fails).

  The result: Yes, when you restore a recent backup, it will also restore the recovery partition.

  I am very happy.

• Rescue and recovery will not restore backup files it finds when starting

  I recently had a system problem on my Lenovo computer and had to recreate the image. When I try to restore my backup using rescue and recovery (R & R), they prove inaccessible. How to access these backups?

  Details of the options selected in R & R are attached, as an image on the screen of the settings dialog box.

  Running R & R, backups (on an external HDD USB) are visible and can be selected as expected. When the computer restarts in the space of restoration work, after a warning do not turn off the power, you get the error message "the restore has failed because the backup was not found at the specified location. Accept that the computer restarts in Windows. In this case regardless of the options selected at the start of R & R.  Where appropriate I select the USB external storage device in the Setup program and select a backup of those listed.

  I also tried updating all Lenovo utilities, including R & R. The option 'get new updates"errors when downloading the package information Lenovo Service Center (1 on 1) at the helm of the 30% with the error" Exception should not met!

  

  A lot of ongoing issues.  Many Lenovo post deal with each issue. Intel, system update, create a recovery to the USB media.

  For now, I'll address your problems of rescue and recovery. It seems that your system worked well, until a database had records in doubles in it, and you want to use RI to restore a backup on your USB.

  Then you have attempted a return to the factory, which show a lot of questions.

  If I understand your request, you want to restore your system to some time in the past, using a backup RNR. Either last week or 2 months ago. Something that works.

  ===

  RNR will save all partitions on the disk C DD.  It never saves another HARD disk.  2 readers warning has been around for a while. If C and D are on the C drive, HARD drive, it will run through RNR.

  Single file restore only runs on the windows RNR.  But there is no need to restart standalone RNR (pf11 during startup).

  It is ok. At least the RNR version on windows can find and restore your USB /rrbackups, of 5 min or 30 hours. This works.

  ==

  Factory restore installs a RNR version right here. This version probably does not match the version on your USB. If you started the RNR factory with the USB version version, you might expect not found messages.

  ===

  On your system windows today, please state the version installed.  Start using pf11 and indicate the version installed.

  You cannot create recovery media and rescue on the same device. Your luck if anything boots on the USB (other positions).

  Essentially, the RNR standaone version must match the /rrbackups on USB.

  =

  How do restore you to the factory settings? pf11 through the work of rnr or external cd/dvd?

  You are the original owner of the machine?

• Rescue and Recovery 4.3 for Windows 7 problem on T60p

  Rescue and recovery 4.3 Advanced mode does not communicate with my USB devices.  I want to save a number of files that are on my USB support, but the R & R never contact him.  No problem viewing with explore.

  My mistake!  I wrongly assumed that the day of rescue & recovery update would allow me to restore individual files.  I forgot to read the text information installation included with the download.  R & R works, but does not have access to any previous file.  Too bad.

• Use 'restore factory of Rescue and Recovery' to upgrade 32-bit to 64-bit windows 7

  I have 6 GB of ram on my Lenovo SL410. It runs win 7 32-bit.
  Windows shows that it is capable of 64-bit.
  Can I use "restore factory Rescue and Recovery" to perform the installation of win 7 64 bit?

  Thank you

  Your recovery DVDs are listed here:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-SL-series-laptops/ThinkPad-SL...

  I guess if your recovery partition factory is win 7, 32 bit, it will restore win 7, 32 bit.

  You can order the win7 64 bit DVD for about $50 US recovery.

• Why my system restore has stoped working and 1 problem more too!

  Hello, I hope that some people may help me with my 32-bit vista, 2 cpu to 1.9 Ghz Intel, gateway comp. GM5420, G965 express processor and directx 11 or 10 and I run Avast Anti-virus.  My SR = system restore has worked for many years and now the past 3-4 months whenever I need it, it starts as usual, but at the end it says error could not change your system. No file or folder have been changed.  The only thing I can think is around the same time, 3 to 4 months ago, I found and started using some utilities to clean up my computer.  I have 4 different services who clean things different from vitsa. I wonder if 1 of deleted then a file that I need to use SR?  And if not how can I repair my vista then SR woeks again? Thank you

  And another problem that earlier, I started to have my yahoo email will not load a web page, so that I can ck my emails or use any other link on messenger to open a web page of yahoo. He worked as my messenger hotmail from microsoft that works very well. I uninstalled yahoo messenger and reinstalled several times but each time that nothing works. I can sign but can't click on anything. A s error message opens and says can not find the web yahoo page you are looking for. I really need my email yahoo to work right as my hotmail works very well.  I wonder if its my IE9 that something has changed there and now yahoo of just work, I don't know just a guess. Its driving me crazy why these two problems came earlier when I've never had a problem with either an ever sice I had this beautiful Vista computer.  Please tell what to do easy to understand the answer I can do what you think I should do to solve the two problems? Ok.  Thanks for any help. Ok

  There is no file to download from Microsoft; I'm sorry.

  Certainly sounds like the registry cleaner has done by the removal of 10% of the files.

  If SFC does not help, you will need to follow the rest of the information available to me somehow. (ask about DVD).

  Or save your data and reinstall Vista.

  You don't say what brand of computer for Recovery Options and you say that you do not have a Vista DVD; but a recovery disk came with him...

  See you soon.

• Problems of restoring a backup of Windows Vista backup and restore program

  I recently had to completely reinstall Windows XP, then the Vista upgrade, to fix a problem with updates of Microsoft.NET and ATI graphic driver.  In may, I made a full backup of my laptop using Vista resident backup and restore program, using an external hard drive to store the backup.  When I learned that I had to reinstall the operating system, I did another backup in August (but not complete) using the same program.  Just after this backup in August, I did the reinstallation of operating systems, with the help of the phone of Dell.  My original problems are solved.

  When I was ready to use the restore the Vista program, I had to choose among the two sets of data (May to August) about which I wanted to restore on my laptop.  I chose August, thinking that it would be later.  However, in Outlook, all my saved e-mail messages are gone, I have no e-mail address book and any current calendar entries.  These are the only things I noticed up to this and are not, but I have not checked all the files... they are large enough.

  The folder on my laptop which normally contains my Outlook data files shows only a file Archive and the very small current .pst data file for 7 messages in my Inbox.

  It seems that the backup of August was important to may backup and maybe most of my Outlook data are in the may backup.  How to get data from two backups in my laptop?  When the backup is a folder with the same name, you have the opportunity to write about it, not copy, or copy it and have 2 folders.

  I tried to copy all the data from the external hard drive in the folder of Outlook data on my laptop.  It will eventually be several files, and Outlook reads only the more recent, so I don't always get access to the data that I hope is here!

  Can someone please?  My life is in my calendar, I lost years of e-mail addresses, and much saved messages that contain important data.  Thank you!

  Hello

  You must import the Outlook.pst files from backups in your current Outlook. Copy your gift
  Outlook.pst file somewhere else as a backup incase you made a mistake. If necessary you can IMPORT
  New in Outlook. If you import all your old Outlook.pst files into your new perspective you should have the
  total sum of all. Import e-mail messages, and then click contacts.

  How to migrate to Outlook 2007 and Windows Vista
  http://www.vista4beginners.com/migrate-to-Outlook-2007-and-Windows-Vista

  More help here Discussions and focus groups:

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Microsoft.public.office.setup discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?GUID=1A61081E-1F66-5F7F-B5BA-04767E55A63B

  -----------------------------------------------
  Some tips on the Outlook backup, you can use. Also save the Outlook.PST file occasionally by copying
  He's somewhere else.

  Back up Outlook data with the tool backup Microsoft Outlook personal folders
  http://Office.Microsoft.com/en-us/help/HA100758021033.aspx

  With the help of the tool backup Microsoft Outlook personal folders
  http://Office.Microsoft.com/en-us/Outlook/HA010875321033.aspx

  Outlook 2007/2003/2002-in Add-in: Personal Folders Backup
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8B081F3A-B7D0-4B16-B8AF-5A6322F4FD01&displaylang=en
  Rob - bicycle - Mark Twain said it is good.