Data guide new channels are not

Similar Questions

• As the pipeline input channels are not supported.

  Guys, I have this script to add a vDisk to each virtual computer via one loop for each...

  $VMNames = get-Content "E:\Code\Scripts\VMware-VM-UpgradevHardware\VM_Batch-1.txt".

  # START the foreach loop

  {foreach ($vm to $VMnames)

  #Perform paraSCSI update

  Write-Host $VM

  Write-Host "Adding new CCG virtual disk..." »

  # Get - Vm $vm | New-harddisk - CapacityKB 2048 - persistent persistence

  $vm | New-harddisk - CapacityKB 2048 - persistent persistence

  Read-Host «allows to pause and check...» »

  . but when I run it, I get this error.

  New hard drive: cannot process the transformation of argument on the parameter "VM". As the pipeline input channels are not supported.

  E:\code\Scripts\VMware-VM-UpgradevHardware\pvSCSIUpdate3.ps1:55 char: 7

  + $vm | New-harddisk - CapacityKB 2048 - persistent persistence

  +       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidData: (EDM-SNEC - DBTEST:PSObject) [new-harddisk], ParameterBindingArgumentTransformationException

  + FullyQualifiedErrorId: ParameterArgumentTransformationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.NewHardDisk

  Allows to pause and check...:

  Any suggestions?

  You should have an object VirtualMachine (output of Get - VM) on the hose, if you want to send it to the cmdlet New-hard drive.

  The concept of object by name (OBN) does not work for the channelling of entry here.

  You can do

  # START the foreach loop

  foreach ($vm in (Get-VM-name (Get-Content "E:\Code\Scripts\VMware-VM-UpgradevHardware\VM_Batch-1.txt"))) {}

  #Perform paraSCSI update

  Write-Host $VM. Name

  Write-Host "Adding new CCG virtual disk..." »

  New-disk-hard - VM $vm CapacityKB - 2048 - persistent persistence

  Read-Host «allows to pause and check...» »

  }

• Why new messages are not "BOLD"? SOLVED, caused by the creation of Windows fonts which had not separated "BOLD" and not "BOLD" entered

  bold text I just installed Thunderbird 24.6 on a new system running under Windows 7 64-bit. I can read and send messages, but in the component main, new messages are not "BOLD", and e-mail accounts that have new messages are not fat, either. On another Windows 7 x 64 system I don't have this problem. The add-on installed only is lightning on the new system and I started Thunderbird in safe mode, but that has not solved the problem. There is still the/unread column and it correctly displays a pip by unread emails, but I want the effect "BOLD" to return. How can I fix this?

  Problem solved. I was playing with the Windows font setting and chose a policy that did not separate entries "BOLD" and not "BOLD" (Segoe UI Semibold)

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• Message error "data of this type are not supported.

  Original title: cannot run files as an administator?

  I can very well run files (.exe, ect)
  I can't just stuff like an administrator lance. I usually get the error message: "the data of this type are not supported" I tried to pass microsoft too download a 'fix - it' too, but when I try to run too .msi it say 'Administator blocked privledges' or something of the sort.
  Everything works completely fine 100% in safe mode.
  It happened after I did a virus with malware bytes scan and deleted a virus derived from 'PrivitizeVPN' that is a VPN that was actually a virus.

  Hi Raul,

  Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Answer please if you have any questions.

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• CAN frame channel Conversion Library - add new channel will not convert on channel

  I hit a roadblock with the Conversion CAN frame v1.0.2 channel library.  I don't think I properly use the 'Add New Channel' vi because it always causes the frame on the canal to fail.  The channel to the conversion of image works fine.  I joined the Panel front and a simple example block diagram.  This VI returns the following error during the conversion of the chassis on the channel:

  Error 8702 is produced to convert image to Channel.vi

  Possible reasons:

  A call to the library met with a null pointer.
  Ensure that all entries in the VI have a valid value.
  In the case of tables, make sure the table is not empty.

  Any help would be appreciated!

  Thank you

  This issue is resolved by upgrading to the Conversion CAN Frame Channel 1.0.3 library and place the frchconvlib.dll file in the C:\Windows\system32 directory.

• After you disable the new interface to tabs, all new documents are not open in a larger window

  Hello

  Yesterday I upgrade my Adobe 11.0.10 Adobe Acrobat Reader DC 15.010.20056 player. The tabs interface was pleasant enough, but there are still some limitations with this features, such as,.

  1 > no option to set no maximum. tabs in a single window,

  2 > tabs cannot organize, to be moved to a new window and several selected

  I want to disable the new interface to tabs via Preferences > General > open documents in the new tab in the same window (not checked), but after you turn off the new tabbed interface, all new documents open after the first document are not open in a maximized window, they always opened in a restored window.

  No matter what I do, it keeps - on the opening of the second new pdf in this one, restored windows are the things that I tried to overcome this.

  1 > right of the DC open Adobe Acrobat click in the task bar > Adobe Reader DC > right click > properties > run: enlarged - only the first document opened in maximized windows, documents later opened in the restored only, window that too seem to not work when I closed the last document in a restored window. Opening in the same window type is part of the windows operating system, it does all the time, "opens the entire application in the same way that they have been closed, either maximized/restored and the size of Windows too". Only the first one application window is open in this way, rest of the windows open is seems to be not supported by the operating system.

  2 > of this forum discussion https://forums.adobe.com/thread/435552?start=0 & tstart = 0 , I checked for the mentioned, registry keys

  HKEY_CURRENT_USER\SOFTWARE\Adobe\Acrobat Reader\DC\SDI

  the default value is - "bNullDocMaximized" = DWORD: 00000001 , "bMaximizeNextDocument" = DWORD: 00000001 and "bResizeOnOpen" = DWORD: 00000000

  Exchange only tried on the third button (the rest has been preset to required values) - "bResizeOnOpen" = dword: 00000001 - restart > no change > reset to its default value

  What to do now...?

  Thanks in advance

  Hi Gangatharran,

  Thank you for bringing this to our notice.

  We have recorded a bug for this and will share an update on the progress made in this thread.

  Kind regards
  Rave

• new tabs are not open

  When I clivk the + sign on the tabs toolbar or select NEW TAB on the file menu, a new tab will not open if I select fire fox Help menu help, a new tab open and I can then go to my home page and use as usual, since the update to 3.6.15

  The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Obviously something in this extension is not compatible with a Firefox security patch. Disable this extension or uninstall it.

• Added properties (Group and channel) are not a numeric data type.

  I use a use to add two groups and channel custom properties. The properties are text and digital, double and whole.

  When I create a request in the browser, I selects the custom using the drop-down list property, but has only the drop operator "=" or "<>". "" The property is displayed in the data portal is a number of float. I had this problem when I was adding properties custom by using a script. I then tried "Navigatorinstallation / my Index DataFinder/Reset/Reset", then repopulated my search box, using the use on my raw data files. At this point, all the properties of my have only the "=" or "<>" choice of operator in the query.

  It seems that my properties are digital in the data portal, but the the query string of the browser.

  Thanks in advance,

  Hi Bill,

  You don't have to delete the files.  Choose the NAVIGATOR menu "settings > My DataFinder > reset... '. "can clilck on the UPPER part of the two buttons, one called"reset the index.  Which will remove all records in database and re-index all of your data files.  If you one of these properties have already optimized, set their State not optimized before resetting the index, otherwise the optimized property data types will persist.

  If this does not help, then the problem could be in the use that you use.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to record my mouse settings because whenever I reboot the new settings are not in place. Robin

  I have a lenovo G575 computer laptop with windows 7 and a HP wireless optical mouse. Please tell me how to save the settings of the mouse because they are lost when I reboot.

  Hello

  Did you changes to the computer before the problem occurred?

  What was the last time computer worked well?

  Method 1: I suggest you to update mouse drivers and check if the problem persists. If the problem persists, please try the methods below.
  For more information visit

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Run the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 3: Check the functionality in another user account.

  If it works in a different user account, then the user account is damaged.

  Create a new user account, copy files to the new user profile http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

• New lines are not included in the formula of TOTAL in the footer cells

  I have a table in which I put a SUM formula in the line of the footer for a total of the column over a series of columns.

  It was that I could drag the icon '=' under the table to add additional lines and the formula of the SUM comes automatically adjusted to include the additional lines added.  Now, so that the total cell of the column to include values in other lines, I have to individually edit the formulas and drag to include the new lines in each formula of TOTAL.

  What on earth did I screw up?  I googled this 1 million ways and keep only to find the instructions to find out how he set up to begin with... but clearly I did something wrong.

  Your formula looks something like this?

  

  = SUM (A)

  The trick is to have just the letter of the column, not something like A2:A5.

  A quick way to enter a formula in a cell in the row of the footer is to select the cell, and then choose this toolbar:

  

  SG

• Windows Update list updates to date for products that are not installed

  Windows Update said I got 4 updates for. I went to see what they were so I could download and install.  I noticed that 2 of them were products I and 2 era for the things I didn't.

  Why would I receive updates for Microsoft Office 2007 when I didn't have any part of it installed and I have Microsoft Office 2010 is installed.  These updates are of no use to me then why I get them.

  I have not installed Microsoft Office Compatibility Pack.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The new owners are not able to update?

  I just got my bike 360 today and I'm trying to update the software of my watch. It is said that it is far for just the blink of an eye, then it pops up saying that it was an error and I have the option to retry or cancel.

  It is running:

  Version of the software - 4.4W.2

  Build number - KNX01S

  I know this isn't the software up to date. My phone is a Droid Turbo KitKat still running, but I don't think software has to do with the another update to Lollipop. Someone please help.

  Thank you!

  
  

• More than half of the albums on my new e260 are not displayed

  Hi - I just bought a v2 e260.   I have an e250 v1 that I had planned to give to my sister once I transferred all my music and podcasts.

  I transferred a bunch of albums by 8 artists, as well as podcasts, the e250, and only 3 artists (most all the podcasts) appear on the e260.  Missing music does in Albums, Genres or songs either.

  I know they're there, because I can see all the files when I look at the Sansa e260\Music folder in Windows Explorer.

  Everything has good ID tags - e250 I see all my music - artists, Albums, Genres and songs.

  I deleted everything, updated the firmware and copied all the files on the e260, but exactly the same thing happened.

  I hope someone can help because it's very annoying.

  Thank you.

  OK - I have solved my problem.

  After looking around these forums, and the other thing that the iPod one, I thought it might have something to do with USB mode.   By default, it had been at PSG, but the e250 was in MSC.

  So I deleted all of the e260, put it in MSC mode and copied all songs/podcasts vice versa.

  When I turned it back on, everything appear.

  Very happy now.

  However, I still can't understand why - in MTP mode - songs showed, but more than half did not.   I can't see the logic, and it's frustrating.