Data Protection does not work as expected
HelloProduct information:
FDM 9.3.3
HFM 9.3.3
FDM FM9x-G4-G adapter
Description of the problem:
FDM data Proctection option works as expected.
It generates the export file properly, I mean that it adds the content correctly at the end of the file, which is needed to be protected. However, when loading this generated file FDM, replace all HFM data, including the data to be protected. When the same file generated in FDM is loaded manually in HFM, charging correctly.
No matter what you have an idea about this?
Thank you
Mustafa
You have an event script that runs after the load, which could have an impact. If you disable calculate FDM, done? If you calc in HFM after handloading, and correct the data?
Sounds to me like it might be a problem of rules HFM.
Tags: Business Intelligence
Similar Questions
-
Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support. Error: failed to hose CPI. »
Quit Safari, Chrome to quit smoking. If necessary Forcequit.
Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.
Do the same for Chrome.
Close all browsers, restart the mac.
-
FRAGMENTATION applied on several logical Tables does NOT WORK as expected
Dear all,
I have the below scenario implemented that does not work as expected.
I have a logic Table LT1 (SUN) which is being implemented based on two physical Tables PT1 and PT2 (PT1 and PT2 are DIMS). LT1 has two of LTS, LTS1 and LTS2 implemented PT1 and PT2, respectively. Fragmentation is applied based on the ID of the system Source the PT1 and PT2 are loaded from different source systems. The granularity of the Tables physical is the same.
Likewise, we have LT2 (DIM), which is implemented in two Tables of physics more and Fragmentation is applied in the Source systems function ID.
We have an other TIMES DIM on which fragmentation is not applied.
All of the above tables are linked to the fact (also physical and logical).
I filter the data for TIME_DIM. Year = 2014 in all scenarios below.
Scenario1: This solution works as expected when I shoot columns of LT1, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)
Scenario2: This solution is also works very well when I shoot columns of LT2, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)
Scenario 3: When I pull the LT1, LT2, SUN report, done TIME and filter the data for TIME_DIM. Year = 2014, the report does NOT WORK as expected. (Filter on YEAR = 2014 is not passed in UNION All queries in this scenario)
When I build the model above (for scenario 3) report, it does not go as planned. Do not throw any error, it displays incorrect as results as physical demand generated by the BI server is not correct. Some of the filters is past the TIME SUN are not injected at the request of physics.
Someone come in this scenario, no solution to the above is greatly appreciated. Thanks in advance
Kind regards
Madhav P.
This is the bug in OBIEE 11 g of product. Oracle has provided the patch for the same and it is absolutely working fine now.
Kind regards
Madhav P.
-
Information about password protection does not work in the IPhone 4S
Hello
Good evening. I use IPhone 4S for the past 2 years. March 9.3 IOS has released and even I've updated in my IPhone. But the Notes password protection does not work in my IPhone 4 s.
Please let me know why this does not work in my IPhone.
Thank you
Maryse M.
Post edited by: Maryse
You can respond with more details on what you mean by "does not"-for example, no option to create a password, no option to lock a note, cannot open a note protected without password, etc..
The following can also help. It has instructions on creating a password in the Notes app or in the settings App, keep your notes safe with password-protection - Apple Support
-
Adapter DB of the poll as singleton process does not work as expected
Poller DB adapater uses to control the transaction all the seconds to the downstream system and I want this poller as singleton process (an instance should be in working order at the same time).
As suggested in the documents of the oracle, here are the settings that are configured in the composite.xml file.
< name of service = "polling_Mange_Alert_Events."
UI:wsdlLocation = "polling_Mange_Alert_Events.wsdl" > "
" < interface.wsdl interface =" http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt) "/ > "
< binding.jca config = "polling_Mange_Alert_Events_db.jca" >
< property name = "singleton" > true < / property >
< binding.jca >
< name = "jca.retry.count property" type = "xs: int" much = 'false' override = "may" > 2147483647 < / property > "
< name = "jca.retry.interval property" type = "xs: int" much = 'false' "
Override = "may" > 1 < / property >
< name = "jca.retry.backoff property" type = "xs: int" much = 'false' "
Override = 'may' > 2 < / property >
< name = "jca.retry.maxInterval property" type = "xs: String" much = 'false' "
Override = "may" > 120 < / property >
< / service >
JCA file settings are:
< name of the adapter-config = "polling_Mange_Alert_Events" = 'Database adapter' adapter wsdlLocation = "polling_Mange_Alert_Events.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">
< connection-factory location = ' ist/DB/vff-int-was"UIConnectionName ="PT_APPINFRA"adapterRef =" "/ >
< endpoint-activation portType operation "polling_Mange_Alert_Events_ptt" = "receive" = >
< className = "oracle.tip.adapter.db.DBActivationSpec activation-spec" >
< property name = value = "polling_Mange_Alert_Events.ManageAlertEvents" / "DescriptorName" >
< property name = "Nomrequete" value = "polling_Mange_Alert_EventsSelect" / >
< property name = "MappingsMetaDataURL" value = "polling_Mange_Alert_Events - or - mappings.xml" / >
< property name = "PollingStrategy" value = "LogicalDeletePollingStrategy" / >
< property name = "MarkReadColumn" value = "TRANSACTION_STATUS" / >
< property name = "MarkReadValue" value = "Treatment" / >
< property name = "PollingInterval" value = "10" / >
< property name = "MaxRaiseSize" value = "5" / >
< property name = "MaxTransactionSize" value = "5" / >
< property name = "NumberOfThreads" value = "1" / >
< property name = "ReturnSingleResultSet" value = "false" / >
< property name = "MarkUnreadValue" value = "pending" / >
< / activation-spec >
< / point endpoint-activation >
< / adapter-config >
This poller process runs on the environment in clusters (2 soa nodes) and it does not work as expected in the singleton process.
Please advice to solve this problem?
I think that, in this scenario, you must use the distributed polling in the DB adapter. You can select in the voting options in the DB adapter configuration wizard.
-
Original title: restoration works not
The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.
It works for some configurations.
-
xdoxslt:get_variable does not work as expected inside, if
Hi all
I want to compare the maximum value of an element (the name of the element - ROUND ) with other values.
So I have a loop for iteration. Inside the loop, I have an if statement to compare the values.
If the value of the element is greater than the max value, I replace the max value with the value of the element.
Here, up to 9 it works fine. But after 9, if the value of the element is 10, the comparison is not the case. The Code below does not work.
Code:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<? xdoxslt:set_variable($_XDOCTX,_'maxcount',_0)? >
<? for-each: Task_History_V? >
<? If: lower - case (STEP_NAME_1) = "analysis"? >
<? ROUND? > <? » ---« ? > <? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >
<? If: ROUND > (xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >
<? xdoxslt:set_variable($_XDOCTX,_'maxcount',_ROUND)? >
<? end if? >
<? end if? >
<? end foreach? >
<? "Max value: '? >
<? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Example of XML data:
< / Task_History_V > < Task_History_V >
8th < CHANNEL > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V > < Task_History_V >
< 9th > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
< Task_History_V >
10th < CHANNEL > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
< Task_History_V >
< ROUND 11 > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Expected results:
8 0
9 8
10 9
11 10
Max value:
11
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Output current:
8 0
9 8
10 9
11 9
Max value:
9
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
He would be grateful if you help me to solve this problem.
Thanks in advance.
-Hari
(xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >
TO
number (xdoxslt:get_variable($_XDOCTX,_'maxcount')). >
-
EL Capitan automatic date time does not work
People
I use an El Capitan 10.11.5 MacBook Air version.
I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.
I ran these commands on a terminal
$ping-c 5 time.asia.apple.com
Ping: impossible to solve the time.asia.apple.com: Unknown host
$ping-c 5 time.nist.gov
PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes
64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms
64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms
tell me ping works but not for the server ntp - time.asia.apple.com
$nslookup time.asia.apple.com
Server: 192.168.1.254 address: 192.168.1.254 #53
Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.
time - ios.g.aaplimg.com canonical name = site time.apple.com.
Site Time.Apple.com canonical name = time - osx.g.aaplimg.com
$cat /etc/ntp.conf
Server time.asia.apple.com.
$ ntpq Pei
No returned ID association
Please, back up all data.
Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:
8.8.8.8
8.8.4.4
It's Google DNS. Click OK, and then apply.
In Safari, select
▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data
and confirm. If you use another browser, clear the cache memory. Test. Any difference?
Notes:
1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.
2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.
-
Hello
I am trying to create a game but my VI does not work as I want it. IM pretty much a beginner to labview and have no idea of what's wrong with my code. Help please!
So far I've only added the 'up' and 'down' button, and I want the red square to stop a black square or otherwise follow the instructions of the button that is pressed.
I'm not entirely sure how I should go to. My trial ended a horrible failure.
Any help would be appreciated!
Thank you
1 stop using local variables. They are at the origin of the race conditions and you can use the stream for each thing. The main thing is have it your curls 'building the map' transfer data to your event loop. This includes the initialization of your shift registers...
2. make an event for your stop button.
3 place the controls to their corresponding events. This will allow the locking buttons.
4. the work on the line of things better. It will help a ton by keeping your paths easier to read.
-
defrager disk does not work as expected
I tried to program the defrager drive to run on a schedule and it confirms that it is now a calendar but it does not work on the scheduled date and time. As a result, I have to manually defragment. Thanks in advance
Try this:
Start > Type, Services > click Services > Scroll to drive Derfragmenter > left click, properties > list drop-down list, the automatic value or delayed automatic
-
BEFORE the UPDATE of relaxation with time stamp does not work as expected
We have a scenario where I check update operations on a table.
I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.
Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.
(I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)
'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER ---- ----------------- ------------------------------- T1 U 13-OCT-15 03.07.01.775236 AM <<---------- This is the main table, This should have the latest timestamp T2 I 13-OCT-15 03.07.01.775953 AM
Here is my test case.
DELETE FROM TEST_TRIGGER_1; DELETE FROM TEST_TRIGGER_2; SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1 UNION SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2; INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker) VALUES (1, 'I', SYSTIMESTAMP); COMMIT; SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1 UNION SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2; UPDATE TEST_TRIGGER_1 SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP; COMMIT; SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1 UNION SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
Def trigger:
CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW FOR EACH ROW WHEN ( NEW.IBM_SNAPOPERATION= 'U' ) DECLARE V_SQLCODE VARCHAR2(3000); --PRAGMA AUTONOMOUS_TRANSACTION; BEGIN INSERT INTO etl_dbo.TEST_TRIGGER_2 (ID, IBM_SNAPOPERATION, IBM_SNAPLOGMARKER, TRG_INS_TMST ) VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP) ; --COMMIT; END; /
Output is something like this
1 row deleted. 1 row deleted. no rows selected. 1 row created. Commit complete. 'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER ---- ----------------- ------------------------------- T1 I 13-OCT-15 03.07.00.927546 AM 1 row selected. 1 row updated. Commit complete. 'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER ---- ----------------- ------------------------------- T1 U 13-OCT-15 03.07.01.775236 AM <<---------- This is the main table, This should have the latest timestamp T2 I 13-OCT-15 03.07.01.775953 AM 2 rows selected.
But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given
It's OKAY - I told you in my reply earlier. Reread my answer.
could understand somehow that the UPDATE statement is made with earlier
SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have
time stamp prior to the trigger, but this isn't what we wanted. We want to
BEFORE the update)
As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.
Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.
HE has TO - it's your update processing statement that causes the trigger to fire.
Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.
Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.
The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.
But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.
And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.
Reread my first answer - he explains all this.
-
Server.findForType () does not work as expected
Hi all,
I have problem with finding vApps using the Server.findForType () method.
Lets start from the beginning...
Goal is to produce streams of work that could be called from outside using SOAP (SOAP is unfortunately obligatory). Portal that will call worlflows is underway of another people.
They said a number of input and output parameters that workflows must accept and provide.
I have test with vCenter Orchestrator environment, Director and everything works fine.
SOAP host is created in Orchestrator using the build workflow (attached configuration - SOAP_Host_Configuration.rtf).
I use SOAP UI to test the portal > communication Orchestrator.
I am able to call using SOAP UI workflows.
I am producing a simple workflow what powers on TIME using the string as an input parameter and who would return the same data as output parameter - VAPP UUID, ID, href, or anything that is considered VAPP unique brand.
Out of SOAP UI of my VAPP is attached (SOAP_UI_vApp_Info.txt).
If I try to use Server.findForType () it only works if I specify it like this:
Server.findForType ("vCloud:VApp", "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / /https://172.16.140.215/api/vApp/vapp-c7b33a3e-2174-465d-a4f2-0fa9663dc75d");
and it does not work if if specify like this
Server.findForType ("vCloud:VApp", "urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d");
In this case I get error:
[21:49:35.911 2014-08-10] [I] Server error: ch.dunes.model.sdk.SDKFinderException: cannot perform the operation ' find (' TIME ',' urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d') ' on the plugin "vCloud".
Problem is that data "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / / . https://172.16.140.215/API/vApp/vApp-c7b33a3e-2174-465D-a4f2-0fa9663dc75d "cannot be retrieved afterwords and be used as a unique identifier VAPP - vapp.dunesId returns nothing. "
I use:
vCenter 5.5.0 1623101
vCO 5.5.1. 1617127
vCloud Director 5.5.1 1753992
vCloud Director Plugin 5.5.0.1894135
vCenter Plugin 5.5.2.1869849
Thank you very much for the help.
Goran
Of course, no problem. I found even a better way to retrieve by ID directly.
Ex:
vApp = host.getEntityById ("PPPV", "urn: vcloud:vapp:65a4db36-8efa-4512-afb5-7d663c13e2be");
Kind regards
ALEKS
-
According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
'Ctrl + End' should move the active tab to the end of the list of tabs.But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.
I tried the mode without failure of firefox and closed all other open programs.
What to do to debug this problem?
or may there is a bug in firefox somehow?See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895
Add code to userChrome.css below @namespace.
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */ .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
-
CTRL key does not work as expected
Original title: keyboard Help!There is a recurring issue going on with my keyboard or very probably my pc...Well first to start with - I use a software type "ventrilo" called "mumble" that uses the 'CTRL' key as a key to talk with others in the same precedente.* *-could be a reasonMy CTRL key seems really screw randomly until that moment, it turn on sticky keys [where ctrl has practically been pressed permanently] even if it is not enabled on the settings... which makes it really difficult to browse web site or use games because I'm unable to type.Even if I try to disable it by using the two keys ctrl - it does not turn off...When I try to copy and paste using my CTRL key left it appears just under the letter c or v when I'm trying to do, but when I do it with my right ctrl - it is successful...* steam question *.I use also a program called "steam" that allows me to talk with others and play some games - but the sticky keys seem to be really stuck on this issue, I am unable to do anything...Whenever I press 'a' after that it is already used once - it will remove 2 characters: example: I type AGT-> and I press 'a' once more-> deletions G and Tor whenever I have press BACKSPACE at all during a conversation of steam, it deletes everything.Urgent W on it also a tab or an im window closed on...pressing V will paste what I had copied at all, and finally pressing z would substitute a letter - for example: za-> type z once more-> towers to zzI hope you understand what I'm talking... help? Thank you...Hello Kent,
Let us make sure that this isn't a keyboard problem. Connect a different keyboard to see if the CTRL key is working. If it works fine, then it is a problem of faulty device. You may need to replace the driver.
If this does not work on the new keyboard, then it must be a setting in the software that you have installed that is causing this problem.
As a work around, I suggest to uninstall and reinstall the drivers for the keyboard and check if this solves this problem.
1. type of Device Manager in the Start Search box and press on enter.
2. browse the keyboard.
3. right click on the mentioned keyboard driver and select Uninstall.
4. once the driver is uninstalled, restart the computer and check if the problem persists.
Note: Windows will automatically detect the keyboard and install the necessary driver via Windows updates.
If the keyboard print incorrect characters, then try the steps mentioned in http://support.microsoft.com/kb/258826
I hope this helps. If you have any questions, please let us know.
-
ACS 5.2 - accounts User File Update does not work as expected
Hello, I have a serious problem with the import of the fixed IP addresses to user accounts in ACS 5.2.
Because this attribute cannot be migrated directly I try via "file operations--> update". I created the file update model, but entered IP addresses aren't imported - all other attributes can be changed without problem.
If I try to "Add file operations-->" it works well, but I can't use this option.
IPv4 address attribute in 'System Administration--> Configuration--> dictionaries--> identity--> internal users' is added correctly and appropriate field is not in user accounts.
Do you have any idea what can be wrong?
Hi Michal,
Yes I submitted this as a bug recently. Sometimes after a migration from ACS 4.
CSCtk05027 : custom fields for users after migration - import/update does not work
Try to change one of your user input. Just add an IP manually it for example. Then do the update. She will work for this user, and it will update the ip address.
The solution is to export all users of your DCC 5. Then remove it from the database and then to make an import file 'Add' instead of update. A bit of a silly workaround but the bug should be fixed in future patches (no information on that yet).
Kind regards
Nicolas
===
Remember responses of the rate that you find useful
Maybe you are looking for
-
synchronize the calendar does iMac ' t with iCloud
I have a problem with my calendar on the iMac that does not synchronize with iCloud. Mystery is that such notes are being synchronized. It's just the calendar which is not synchronized. I already deleted my iMac and reinstalled iCloud account, but ha
-
Import bookmarks of IE10 in FF18 brought only the records but no bookmarks
I went through the import process take IE10 FF18 bookmarked on my machine Win 8. Now, in Firefox, I have in my library, the files corresponding to the bookmark files in IE, but the folders are empty - no Favorites in them. Suggestions? Thank you. Ken
-
URgent: How to install Skype for Windows8.01
I'm using a laptop with Windows8.01 and she has Skype but it says I need to install the new Skype. If I try to install from the official page, but it takes time and no progress instalation. When I search "Skype" on the cell phone to "Seek", I see tha
-
HP 15-f004dx laptop: power on error code 55133891 for laptop HP 15-f004dx
power on the 55133891 error code (my power on password forgotten)
-
install windows2003 Server poweredge t410
Im trying to install windows 2003 enterprise edition in a dell poweredge T410, but it shows the error cannot find the hard drive, how can I install windows 2003 Enterprise edition r2 on the edge of power supply dell T410? What drivers do I need?