Data store is not mounted automatically after updating the Firmware of the LSI
I've recently updated the card RAID LSI firmware on my ESXi 5.5 system (patched and update top of page)
When I rebooted, took place the following:
1. the associated VMFS volume RAID was mounted
2. the data on the volume store was not mounted
I mounted the data store manually and restarted my VMs
Do I have to re-signing the Volume and/or the data store to raise it properly.
Steve
The command should be ok and do the same thing as the command esxcli esxcli storage vmfs snapshot mount -l label|-u uuid
(for details, see http://kb.vmware.com/kb/1011387).
André
Tags: VMware
Similar Questions
-
The data store could not be found.
Hello!
I have Esxi installed 4.0 on HP DL 380 G6. I have 2 x SAS (2x146GB) drives and I have also attached storage iSCSI (from HP MSA P2000 G3). on which I recorded a few servers. When I run the script ghettoVCB I get the result:
/SKRIPTA #./ghettoVCB.sh f lista g /skripta/ghettoVCB.conf
. / ghettoVCB.sh: /skripta/ghettoVCB.conf: line 14: not found
Recording output to ' / tmp/ghettoVCB-2011-08-23_12-00-27.log '...
2011-08-23 12:00:27 - info: = ghettoVCB NEWSPAPER BEGIN =.2011-08-23 12:00:27 - info: CONFIG - CONFIGURATION GLOBAL GHETTOVCB = /skripta/ghettoVCB.conf FILE using
2011-08-23 12:00:27 - info: CONFIG - VERSION = 2011_06_28_1
2011-08-23 12:00:27 - info: CONFIG - GHETTOVCB_PID = 33245431
2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_VOLUME = VMFS/Synology.
2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2
2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-08-23_12-00-27
2011-08-23 12:00:27 - info: CONFIG - DISK_BACKUP_FORMAT = thin
2011-08-23 12:00:27 - info: CONFIG - ADAPTER_FORMAT = buslogic
2011-08-23 12:00:27 - info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2011-08-23 12:00:27 - info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2011-08-23 12:00:27 - info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2011-08-23 12:00:27 - info: CONFIG - POWER_DOWN_TIMEOUT = 5
2011-08-23 12:00:27 - info: CONFIG - SNAPSHOT_TIMEOUT = 15
2011-08-23 12:00:27 - info: CONFIG - LOG_LEVEL = info
2011-08-23 12:00:27 - info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-08-23_12-00-27.log
2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_MEMORY = 1
2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
2011-08-23 12:00:27 - info: CONFIG - VMDK_FILES_TO_BACKUP = all
2011-08-23 12:00:27 - info: CONFIG - EMAIL_LOG = 0
2011-08-23 12:00:27 - info:
The data store could not be found.The data store could not be found.
The data store could not be found.
2011-08-23 12:00:36 - info: start backup for Windows 2008 R2 coaching
2011-08-23 12:00:36 - info: creation of snapshot "ghettoVCB-snapshot-2011-08-23" for Windows 2008 R2 coaching2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/4d5ed225-cdb17961-51bb-d8d385ac2800/Windows 2008 R2 coaching / Windows 2008 R2 Podpora_1.vmdk" for Windows 2008 R2 coaching
2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/iSCSI/Windows 2008 R2 coaching / Windows 2008 R2 Podpora.vmdk" for Windows 2008 R2 coaching
2011-08-23 12:03:42 - info: Instant withdrawal of Windows 2008 R2 coaching...
2011-08-23 12:03:47 - Info: backup duration: 3.18 Minutes
2011-08-23 12:03:47 - info: ERROR: unable to backup Windows 2008 R2 coaching because of the error in VMDK backup!2011-08-23 12:03:47 - info: # final status: ERROR: No. VMs saved! ######
2011-08-23 12:03:47 - info: = ghettoVCB JOURNAL END =.
I also do backups on iSCSI NAS storage.
First ghetto script does not detect the data stores that are local disks where I run few servers and secondly I get error of backup server located on iSCSI for HP MSA.
Thank you.
Your destination data store is set incorrectly
VM_BACKUP_VOLUME = VMFS/Synology.
It should be
VM_BACKUP_VOLUME = / vmfs/volumes/Synology.
-
Data warehouses do not appear on all of the hosts even though storage devices appear on all hosts
I have a frustrating problem that I can't solve, my data stores do not appear on all of the hosts even though storage devices appear on all hosts. Tips on troubleshooting this would be greatly appreciated, it is connected to a Synology NAS iSCSI environment and I use it for my VCAP studies right now, or was
Tried a lot of things so far...
-Recreate the target and starting from scratch
-recreate the cluster from scratch
-Restart the storage
-Restart the hosts (I think that I did in all cases)
And probably a few other things, would appreciate any other advice/lessons
Post edited by: a.p. - title shortened to allow for answers
Please take a look at KB VMware: vSphere management LUNS identified as LUN snapshot to see if that helps.
André
-
Data not mounted automatically store
Hi all
So basically I moved a drive that contains a data store 5.0 VMFS3 ESXi, to a new host which is ESXi 5.0 U1 (with beams HP).
I tried all sorts of discount/analyze again, but the data store will not be displayed.
So whenever the ESXi restarts, I have to enable SSH, login and run "esxcfg-volume - m DATASTORENAME".
I then refresh the storage tab and can then see the data store and the virtual machines will show up.
However, I created a local data store on this host on a separate disk and which automatically gets mounted correctly every time.
Tips/advice would be much appreciated.
Thank you
Can you confirm that data warehouses have different names?
In this case, you can mount the datastore VMFS using esxcfg-volume - M (uppercase "M") that makes persistent mount.
André
-
data store is not big as the player
Hello
I just install ESXi 4.1 update 3 on my fujitsu rx300 S3 with 6x500GB ground mounted in a RAID5 configuration, 2 x 1.6 Ghz XEON 5110 and 8 GB of memory.
The ESX has been successfully installed except the data store: space it is not as big as the player: capacity data store 274 GB then as drive capacity 2, 5 TB.
The VMWARE KB to extend the data store does not work: it did not drive LUN.
I don't know how to extend the data store OR create a second, which will be accessible to another ESX.
Thank you
Limit is 2 TB less 512 bytes for ESXi 4.1, trying to remove a 500 GB drive in RAID 5 configuration and try to create the data store.
-
my store is not act immediately after I had to repair in order to open a session, I know there is a command, I can use to fix the store but don't remember. can anyone help?
To avoid confusion and duplication of effort, please post a follow-up later all replies to your original thread...
I had a virus that forced me to the factory reset, but now I can't update anything, error 0 x 80070057 I get n missing or corrupted registry. . troubleshooting of said Windows upgrade fixed it but the same thing happens...
Thank you.
-
VM attached to the data store, but not in the config
I have a few virtual machines that show that they are attached to a store data, but when you look at the parameters of the client both in the vmx file there is nothing that refers to this data store. And, to top it off, the data store is just a deposit of file I only download iso files to mount for CD-ROMs. I have made sure that the iso is not mounted on the machine (of course) and have paid through any other part of the config, but still it shows attached to that store of data, by the customer and by a powercli script.
When you browse the data store, there is no folders or files on there that refer to this virtual machine. I have about 10 machines all in this difficult situation. Any ideas?
Thank you!
Hello..
VM snapshots come with a .iso mounted for them? If so, that would explain it...
/ Rubeck
-
Empty data store will not be in Maintenance mode
I have an empty data store, which is not in maintenance mode.
It hangs on 'Waiting for all the virtual machine files be migrated from data store'... which is an expression that is not even appear in Google.
Here are the contents of the data store
I've migrated all guests who have been on it. Disconnected the ISOs of the hosts that use and deleted all ISOs.
The related strange thing is that some of the guests who were on the data store are still showing as being connected to it.
Many assume that it is because she is always connected to an ISO image, but as you can see there is no ISO disk images and there is nothing to hide in these files. I have not had no problem in removing the ISO images, and Yes, I have unplugged ISO images before fast vMotioning of customers.
Why they always think that they are connected to something I don't understand, but I suspect that it is one of the reasons for my data store does not in maintenance mode.
I'm under ESXi 5.1.0 799733 (custom build of IBM) on the BladeCenter HS22V blades. Storage is connected by zFCP to a midsize v7000 IBM.
I assume that this is a bug in the system. Please let me know if I'm wrong.
One of your virtual machines have the pictures that have been taken so that something (ISO, for example) was mounted on this data store?
-
i mac OSX10-9-5 2015. How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?
To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?
TT2
-
How will I know that my bios is up to date and if not how can I update
How will I know that my bios is up to date and if not how can I update
For any questions about the Bios, contact the manufacturer of your computer if Vista was preinstalled, or the manufacturer of the motherboard if you have built your own system...
BIOS issues outside of these Forums.
See you soon. Mick Murphy - Microsoft partner
-
"boot configuration data store could not be opened" when starting bcdedit.
"boot configuration data store could not be opened" when starting bcdedit. Boot config-dual PREV XP Pro x 64 1st disk; XP Pro 32 on the 2nd disk. Nuked 1st disk and installed Win 7. It seems that Windows 7 has not identified the 2nd OS because it wasn't on a partition on the same drive? All I can find is info on editing an existing data store. I don't see any information on how to create one from scratch, except there is a Create option and the different option, but not how to decide what the values should be. Any help is greatly appreciated.
Boot from the installation DVD and run Recovery menu. Command prompt.
bcdedit/export C:\BCD_Backup
c:
Boot CD
BCD attrib s h - r
Ren c:\boot\bcd BCD.oldBootrec /RebuildBcd
Messages rating helps other usersMark L. Ferguson MS - MVP
-
After update, the display text of all my PDF files is not clear (I mean not not strong)! Any suggestion?
Hello
Please tell the Reader/Acrobat version you use.
Also say work on the operating system.
You can try the next step and see if that helps.
Launch Reader/Acrobat > Navigate to Edit > preferences > Page Display > rendering > smooth text choose to monitor and click OK.
See if that helps.
Concerning
Sukrit diallo
-
Unable to connect Adobe cloud after update the expiration date of credit card
Unable to connect Adobe cloud after update the expiration date of credit card.
The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.
The best option will be to contact Adobe support for this.
Concerning
Stéphane
-
data store is not accessible vsphere 4.0
data store unavailable on vsphere 4.0... We have a server with connection zFCP on hitachi ams2100 datastore and have 2 LUNs connected 4 days ago, I try to restart my host. and all of a sudden one of my lun is not accessible, I already try to Reanalyze the data store. and nothing happens, I always get the error data store can not accessible. any body can help me please...
is this LUN presented on othe so hosts? If so, then remove the host in question and add it again
to do a new analysis...
-
I just downloaded LR 5.3 and after update, the lens correction Panel is not displayed on the develop module.
One having this problem?
Thanks in advance.Right-click anywhere in the area of HHR panel and check the "Correction of the lens' to display the Panel.
Maybe you are looking for
-
Ultiboard 14.0: Drilling file is corrupt
Hello There are errors in the file of drilling. See attachment. There something wrong with the floating point (NO point floating in the drill file) Kind regards Lieven
-
SMU-8431/8 RS-422 serial card sends the wrong number of bits
I use a card series SMU-8431/8 RS-422 configuration for talking to a camera that has the speed of transmission parameters following 38400, 7 data bits, 1 stop bit, odd parity. I confirmed that the device certainly has these settings I can communicate
-
Output broken for writing DAQmx
Hello I need emergency assistance with a problem I have with write DAQmx. The 'DAQmx write VI' is located inside a while loop that repeats every 20ms. I use queues to transfer data between several asynchronous VI and the data does not update all 20
-
Look for the BIOS to CNU0073PYB password. Thank you
-
Original title: PUM. Disabled.SecurityCenter I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then