database connection reset

Similar Questions

• M40-112-WLAN-connection-reset

  Hello

  I have problems with my M40-112 new for WLAN connections. From time to time the connection will be reset and connected again.

  Other users have the same problem. There is no reason to find it by the access point. My old toshiba with WLAN pcmcia has never had connection - reset and no other cell phones in our network don't have such a problem.

  There is no real driverdownloads...

  Help, please!

  Kind regards
  Frank Neitzel

  [Edited by: admin]

  Hello

  As you can see there are a lot of discussions on the Intel (r) PRO/Wireless 2200BG card. I found a very interesting discussion. Check it please on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4861.

• Database connectivity Kit

  Hello

  I use the database connectivity toolkit to create a Microsoft access database.  I'm new to the Toolbox.  I've read the tutorials online and following the instructions.  I created an empty Microsoft Access file with an .mdb extension.  I also created a link to data .udl with tools > create data... in LabView and linked to the mdb file.  My code VI is attached.  I get the following error when I run the program (also attached).  I don't know what causes this error.  I appreciate your help.

  Thank you

  You can not create a table with the name "table".  It is a key word.

• Reading large data using the database connectivity

  Hello

  I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

  . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

  What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

  

  Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

• problem to generate an installation program for a project of database connectivity

  Hello

  I create a project using labview 2011, this project all simply select, edit and insert a file of access database by using the database connectivity Toolkit.

  There is no problem when I run this labview project, everything is perfect, but when I create a Setup program to run this project from another computer, I found something strange...

  the project do not insert or update the database, but it may choose the form, so I can say that the connection is good, so can any body tell me what is the problem.

  Help, please

  Thank you

  
  

• How to send the SQL for SQL Server statement and return data without using database connectivity Kit?

  Hi, I tried to figure out how to extract data from my SQL Server databases and reading messages and to do some tests with examples, I can get data connection type in my SQL server, but so far nothing helps.  Is it possible to get data from a SQL Server database without using the database connectivity Toolkit?  and if so, how?  are there whitepapers and/or examples of this?  So far, I can't find something that works.  Thank you.

  Jesse - what is your reason for not using the database connectivity Toolkit? It is by far the best way to recover the data.

• Problem installation database connectivity Kit

  My company manufactures in several factories around the world.  I have a problem in China and that you want to debug, and because the code is distributed in the form of exe, it is a problem.  My approach was to install a trial license of 30 days of LV2010 SP1, intend to withdraw when debugging is done.  So far, so good.  The problem is that the application requires the database connectivity Toolkit.  I downloaded a copy and tried to install.  It says it can't install because LV2010 is not installed.  Is it because of the eval license?

  If I wanted to rewrite hundreds of applications running, I could do that, but what I want is to install the DB Toolkit for a bit of troubleshooting.

  If NEITHER would alter the conditions on their license server, I would not have these problems.

• Database connectivity error: ADO...?

  I'm trying to export data in an Oracle database local using the Toolbox Database Connectivity.

  (I created my TEST table in the local Oracle database, I can access, write, read, etc. using SQL.) I also have the .dsn file that works with SQL)

  I get the following error:

  

  I found the problem. Not associated with LabVIEW (Duh...).

  Basically I have two copies of .tns names in two different folders. One of the files that I used to make a connection

  to the database did not have the correct login info and the other did. One who did was one I used.

• database connection status indicator

  I want to put something on the front of my program which will indicate the status of database connection. I think to ask at the tables in the list (it should be displayed), if the connection is good, it shows error. I tried and I think it works very well, but I don't know if it's the right way to do it, there may be better ways there, could someone point out he for me?

  Best regards

  You certainly don't want to open and close the connection. Maybe it will fail, but the 'real' connection is good. Maybe the real one has failed but this other works opening and closing. This could happen if the server has the maximum number of connections.

  Your connection is little go far?

  A simple method to check the connection just must have a loop that executes periodically a meaningless statement.

  

• Calling stored procedures with parameters with the database connectivity Toolkit

  Hi all

  I'm new to the forum and struggling to find a solution to a particular problem I have in this respect, using the LabVIEW Database Connectivity Toolkit on a project, I am currently working on my work.  I have a database in which I tables and stored procedures with parameters.  Some of these stored procedures have input, output and return parameters.

  I tried to follow this example, but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument

  Such a stored procedure I am working on the implementation is named "dbo.getAllowablePNs", running "SELECT * from DeviceType" (DeviceType is the table).  In this case, it requires no input parameter, it has an output parameter that generates the table [cluster] and has a return parameter that returns an integer value (status code for execution) to show if an error occurred.  The DeviceType table has 3 columns; ID (PK, int not null), PN (nvarchar ((15), null) and NumMACAddresses (int, null).)  I have surpassed many examples and I talk to the support OR try to implement this and similar procedures stored in LabVIEW but have not been successful.  I am able to connect to the database with the VI of open connection without error, but spin in some confusion as a result of this step.  I then try to use the VI of parameter query create to call the stored procedure and set the parameters.  I guess I would then use the Set parameter value for each parameter that is connected to the entry of parameters on the previous query with parameters VI VI?  I am also having some confusion during and after these steps as well.  I would greatly appreciate advice or suggestions that anyone could have in this situation because I am not a SQL expert.  Also, I would be happy to provide more information that might be useful.

  Kind regards

  Jon

  Here's what I use to do this.  I think I had to change him create parameterized query VI for him to work.  There is a post on the forum about this somewhere.

  

• Database connectivity broken vi Toolkit

  Hi all

  I upgraded from LV 8.5 to 8.6 (windows XP platform) a couple of weeks and have had no problems until today when all of sudden my vi toolkit database is coming from broken, with: "one or more of the inputs needed for this function are not wired or are wired incorrectly. Display the context-sensitive Help window to see what should be the connections to this function. ' Mistakes however is not the case on all my vi using the objects in the Toolbox.

  Measures taken so far without success:

  1 mass compilation of my vi

  2 mass compilation of database Toolbox

  3 re install Database Resource Kit

  4 mass compile the directory vi.lib

  5 in the old knowladge base article Document ID: 2RO7J544, assured the latest microsoft MDAC is installed.

  Any help is appreciated as we use this receptive toolkit.

  Thank you

  Chris

  PLATES

  Hi Chris,

  Thanks for the reply and I hope that your well.

  I need to try to understand something, when you say that the LabVIEW 8.6 upgrade have you improved the Toolbox?

  Toolkit LabVIEW Database Connectivity 1.0.2 is for LabVIEW 8.6. If, on the other hand your trying to use LabVIEW 8.6 with DC Toolkit 1.0.1 so I think that they are not officially compatible. However, these links may be of interest knowledge base: (after all, they are just screws). However, to say this - if you read the Readme for the new toolkit, that many things have changed for LabVIEW 8.6 - so becareful.

  You will have to manually copy all the files in one version of LabVIEW to another. Use the following instructions to achieve:

  1. Install the database connectivity toolset to the version of LabVIEW, say X.
  2. Copy the following files/directories in the directories right in the latest version of LabVIEW, say Y.
     • Copy the data directory from \LabVIEW X\vi.lib\addons\ to \LabVIEW Y\vi.lib\addons\
     • Copy the file database.llb \LabVIEW X\project\ to \LabVIEW Y\project\
     • Copy the data directory from \LabVIEW X\examples\ to \LabVIEW Y\examples\

  OR also check this,

  Installation of toolkits for use with several Versions of LabVIEW:

  http://digital.NI.com/public.nsf/allkb/58BE852CB35237C786256A290079DF39?OpenDocument

  Other questions that you may have encountered,

  Database connectivity tools claims are a polymorphic Subvi Broken

  http://digital.NI.com/public.nsf/allkb/0FA97221637E74CA86256C7C005069A5?OpenDocument

  "Update to the latest MDAC will solve this problem."

  I would also check that you have installed the Toolkit for LabVIEW 8.6 - toolkits are now specific for labVIEW 8.6. Then maybe try to reinstall and the Toolbox for LV8.6.

  Hope this helps and please let me know (Please specify a little more).

• Minecraft fatal error has occurred (4): Connection Reset?

  When I start Minecraft, it starts to download the packages, then it stops just to the random % and never ends download.
  I've never had this problem before and I don't know what might be the causes as the only changes I made to my computer is a few games on Steam, I installed...
  After about 15 minutes, I get a message saying of Minecraft:
  Fatal error occurred (4): connection reset

  And this happenes, all, simple, time

  I have a 32-bit computer ADVENT laptop with Windows Vista?
  Thanks for reading! Help, please! :)

  Hi guy,

  Method 1
  If you encounter problem when installing the game, then I you suggests to disable all antivirus and then try to install the game.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2
  Perform the clean boot and then try to install the game.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  If you have any known issues with the game, then I suggest you to contact the game manufacturer.

• an error of connection reset

  I always connection reset error seems to happen on my computer, I checked antivirus and im
  err_connection_reset
  by using this 'Ultra' called ethernet card, I tried many things such as the CMd commands and others again
  err_connection_reset
  work does not help please. I also noticed that my Skype sometimes disconnects and reconnects after 2
  err_connection_reset
  minutes and this happens often. Would it still a problem ISP? I also have to reset my router and does not yet etc.

  Hi John,.

  Welcome to the Microsoft community.

  It seems that you have an intermittent problem of the Internet connection. Please help me by answering the following questions:

  1. don't you make changes on the computer before the show?

  2 does happen with all browsers?

  3. what browser do you speak?

  I suggest you carry out the methods and check them off below if it helps:

  Method 1: Reset Internet Explorer settings

  Use this method if you are using Internet Explorer. See the following site:

  How to reset the settings for Internet Explorer: http://support.microsoft.com/kb/923737.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2: Reset the Internet Protocol

  See the following site:

  How to reset the Protocol (TCP/IP) Internet: http://support.microsoft.com/kb/299357.

  Method 3: Reinstall the network card.

  a. click Start, type devmgmt.msc in the start search box, press ENTER.

  b. Select network adapters.

  c. right click on the device, then click on uninstall. Restart the computer.

  d. go back to Device Manager, select the Scan for hardware changes. The NIC will reinstall automatically.

  You can also check for the problems of network card:

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  Hope that information helps. Keep us posted if you are having problems with windows in the future. We will be happy to help you.

• I use windows 7 64-bit edition Home premium and I cannot connect to access database in java program.it shows error database connection driver not installed.

  I am using windows 7 64 bit home premium I installed ms office 2007 and did all the settings.
  but I am unable to connect to the Access database in java program.it shows error database connection driver not installed.
  Please give me the solution...

  Hello

  I suggest you to ask your question about Java programming forums on the subject.

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

  You can also ask your question on the forums to access.

  http://answers.Microsoft.com/en-us/Office/forum/access?page=1&tab=all&TM=1349633636662

• Connection reset error for UNIX connector

  Hello

  While trying to perform research for unix connector, I get the error in the log below.

  
  

  java.net.SocketException: connection reset

  
  For this error in the oracle documentation, it says to resolve this problem, verify that you set the UseSSL parameter value in the target system and the connector server COMPUTER resources to yes and true, respectively.

  
  

  But we do not have a server connector and in the COMPUTING resource for target system, there is no UseSSL parameter?

  
  

  Please suggest
  

  
  

  [2015-08 - 03T 11: 21:23.349 - 07:00] [oimext_server1] [WARNING] [] [oracle.iam.scheduler.vo] [tid: OIMQuartzScheduler_Worker-4] [username: oiminternal] [ecid: 77744a889dde03de:-6b95b905:14ee65bb481: - 8000-0000000000000003, 1:30684] [APP: IOM #11.1.2.0.0] IAM-1020021 cannot perform the work: UNIX user group search Recon xxxxxx with history Job Id: 132260 []

  org.identityconnectors.framework.common.exceptions.ConnectorException: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset

  at org.identityconnectors.framework.common.exceptions.ConnectorException.wrap(ConnectorException.java:101)

  to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:340)

  at org.identityconnectors.common.security.GuardedString.access(GuardedString.java:105)

  at org.identityconnectors.genericunix.GenericUnixConnection.createSSHConnection(GenericUnixConnection.java:328)

  at org.identityconnectors.genericunix.GenericUnixConnection.connectResource(GenericUnixConnection.java:87)

  to org.identityconnectors.genericunix.GenericUnixConnection. < init > (GenericUnixConnection.java:74)

  at org.identityconnectors.genericunix.GenericUnixConnector.getConnection(GenericUnixConnector.java:138)

  at org.identityconnectors.genericunix.GenericUnixConnector.checkAlive(GenericUnixConnector.java:118)

  to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:105)

  to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:74)

  at org.identityconnectors.framework.impl.api.local.ObjectPool.borrowObject(ObjectPool.java:229)

  at org.identityconnectors.framework.impl.api.local.operations.ConnectorAPIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:83)

  to com.sun.proxy. $Proxy506.search (unknown Source)

  at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.identityconnectors.framework.impl.api.local.operations.ThreadClassLoaderManagerProxy.invoke(ThreadClassLoaderManagerProxy.java:107)

  to com.sun.proxy. $Proxy506.search (unknown Source)

  at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to org.identityconnectors.framework.impl.api.BufferedResultsProxy$ BufferedResultsHandler.run (BufferedResultsProxy.java:162)

  Caused by: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset

  at com.jcraft.jsch.Session.connect(Session.java:525)

  at com.jcraft.jsch.Session.connect(Session.java:161)

  to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:336)

  ... more than 20

  Thank you

  My guess is EXIT 328 do not get a response from the server because of permissions or cannot perform the work - check your permissions for remote access and file access system--cannot be a code to deliver all this.

  .createSSHConnection(GenericUnixConnection.java:328)

  Exit 328