Database for the settings of the device

Similar Questions

• HP Elitebook 2570p: need driver for the device system of Base and BMC20702A0 on HP Elitebook 2570p (Windows 7 Pro 64-bit)

  Hi-

  I just installed Windows 7 Professional on my HP Elitebook 2570p, and Device Manager, I'm missing the drivers for the device Base and BMC20702A0 system.

  I went to download HP driver and downloaded page 3 recommended for chipset drivers, but that has not helped.

  Here is the list of the categories of driver for my HP model from the HP Web site.  Where should I go next door to download the drivers?

  Thank you!

  

  Hello:

  You need these drivers for these two devices:

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  File name: sp63637.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp66402.exe

• Schema of database for the processing of the results

  Hi all

  I have a question on the results of teststep registration in the database. I use the generic recordset as my database for the recording of data.

  In my database (SQL Server), there are the following diagrams: dbo, dbtest1, dbtest2. I created all the tables of results (UUT_Result, Step_Result etc...) of the generic Recordset object in all schemas. Therefore, to display the results in the table of Step_Result, I specify the schema as well as the name of the table, for example SELECT * FROM dbtest1. Step_Result.

  Is there a way to tell Teststand to save the result in another schema (dbo, dbtest1, dbtest2) programmatically?

  Yours sincerely,

  chati

  Yes, the tool is easier to visualize what makes SQL. A user can access patterns as much as they have permission for. The problem is that, in order to specify the schema, you must assign the rating on your SQL commands. I don't know of an easy way to do this in Teststand.

  If you manually create the SQL commands is noted:

  [Database]. [Schema]. [Table]

  It is easier to implement multiple user names and to use the default schema to define.

  You can also have a database that is different for each category of journaling (and no need to use patterns at all).

  A lot of good information here:

  https://TechNet.Microsoft.com/en-us/library/dd283095 (v = sql.100) .aspx

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

  Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

  I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

  I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

  Hello
   
   
  The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
   
  Step 1.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
   
  Step 2.
  Here is the link to download the latest drivers.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK
   
  Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
   
  This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
   
  For more information see the links below.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry classic help! How to reset the password for the device

  I tried to change my password for the device, and then I pressed cancel. I changed head to change my password.   My phone has allowed me to use my original password. The next morning, I typed my password and the phone kept saying incorrect password.  How I change my password for the device?

  When you get to 5 or 6 incorrect attempts the device prompts you for blackberry. This is a safety feature to avoid wiping the device accidentally, and also so that you can see if you enter characters, you think that you enter.

  See if the device is to invite you to enter blackberry. If so, do it and then you should power try again the password.

  And if you left the password change and that he has not really changed the password, then your password is always the same as before, no different. Be careful and make sure that you enter the characters that you intend to enter.

• How can I change an icon for the device in Windows 7?

  How can I change an icon for the device in Windows 7?

  In 'Control Panel\Devices and printers' I want to change the icon of a device that there are listed.

  Hi Dave Tavres

  I'm afraid to say that you would not be able to change this icon.
  This icon is provided by the hardware manufacturer, and is included in the drivers and architecture has no Windows allows to change this information.
  However, you can use the third party applications to change. Use your favorite search engine to find on the Internet.

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

  Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

  Hello

  Try these solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

  How do I reinstall Teredo

• BlackBerry Smartphones Blackberry Destop Software has no software for the device that is connected

  I just bought a Blackberry Curve 8310.  I downloaded the desktop software and I wanted to update the software. When I do this it is said that the Destop software does not have the software for the device that is connected.  Help!

  Want to update to?  If you just bought it, it is likely that he is already up to date as far as business is concerned.  If you want the most recent update, then click on the link below:

  http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/151886-latest-OS-8310-4-5-0-108...

• Invalid configuration for the device 3

  Hi all

  I have set up a lab nested with three hosts esxi and two warehouses of data connected with the Microsoft iscsi target server. I know nested vm is not supported, but I'm trying to implement this workshop because I support a real VMware environment and I wish I could test some things before I break anything, so it's important. I get this error when you try to create a virtual machine "invalid configuration for the device 3.  Someone knows how can I know where is the problem?

  Thank you

  I think I can find the answer, it seems that it could be a windows problem causing data corruption. Somehow I created a VM but get all kinds of error trying to create an another VM.  Iscsi targets set up using windows server 2012 and it seems that there is a fix from Microsoft below which deals with corruption LUNs in windows 2012.  I have not yet tested, but this seems to be the right direction. http://support.Microsoft.com/kb/2908783

• Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical users to end dry change

  Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical end users EASILY change the sections of the web site.  Can this work?  Thank you.

  I would like some ideas.

  A CMS is the standard solution in the industry today. The most common environment is LAMP (LINUX, Apache, MySQL, PHP).

  Some of us to write custom CMS systems for a living. I concentrate on CMS for retirement centers. There are all kinds of solutions CMS available ranging from generalist, off-the-shelf CMS like WordPress, completely custom, with a lot of opportunities in the meantime.

• I can't find the drivers for the device of 'other '.

  I can't find the drivers for the device of 'other '.

  There are 3 basic system features that are all to even show a yellow '! ' in Device Manager.

  1.

  Location: Bus PCI 21, device 0, function 4

  PCI VEN_1180 & DEV_0592 & SUBSYS_20CA17AA & REV_11\4 & 3B3A03B5 & 0 & 04F0

  2.

  Location: Bus PCI 21, device 0, function 3

  PCI VEN_1180 & DEV_0843 & SUBSYS_20C917AA & REV_11\4 & 3B3A03B5 & 0 & 03F0

  3.

  Location: Bus PCI 21, device 0, function 5

  PCI VEN_1180 & DEV_0852 & SUBSYS_20CB17AA & REV_11\4 & 3B3A03B5 & 0 & 05F0

  Please help me to fig on which driver should I install to solve this problem.

  Sincerity,

  Thank you very much

  T61p: 6459CTO T9300, NVidia Quadro FX570M - 256 MB op GL, 15.4 "WSXGA + TFT, 160 GB 7200 RPM HDD, 2 GB of RAM, Windows XP Pro

  Thank you very much

  Finally, I have foound they're driver for Ricoh 4-in-1 card reader

  First time I think it wasn't this card because I bought the card reader chip, so I don't think on this driver for the card.

  in any case thank you

• How to fix a sound problem - reading devices no. for the Device Manager on WinXP SP3?

  (1) I can't to Device Manager by following the guide for help on my system.  The steps do not match what is actually showing me my Windows and I can not here the only way I can get to it is to use a link on the help page directly.  Even when I do that, the steps in the help guide still do not match what I see on MY screen.  Is this perhaps an update of this Guide to match my system?

  (2) I need Device Manager to find out what happened on my Audio device.  I have no sound from my speakers.  It happened all of a sudden when my wife was using the computer.  I don't know what she can do both.

  Start/Settings/Control Panel / sounds and Audio Devices Properties shows "No. Audio Device", hence "Volume of the device" is gray.  Audio tab displays 'No peripheral to read '.

  The fastest way to bring up the Device Manager is:
  Start-> Run-> "devmgmt.msc".
  If it detects the sound equipment, but there is a problem with a driver, you will probably see a yellow "!" appears by your audio device.

  If he was working and stopped, you can try to perform a "System Restore" to a point where it worked:

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• Windows ACS 4.2.0 back up the database on the device of 1120 acs 4.2.1.15

  Hi all

  I am running windows based acs 3.3 in my lan environment class must be replaced by acs 1120 running acs 4.2.1.15, ACS 3.3 database was built up to 4.2.0.124, step by step through the process of upgrading

  (1) acs 3.3.3.14---> 4.1.1.24

  (2) acs 4.1.1.24---> 4.2.0.124.

  now, my database is with 4.2.0.124 dmp file, I can not move my database to 4.2.1.15 because 4.2.1.15 patch is not applicable & executable on package evalution 90 days of 4.2.0.124 for the windows platform.

  can I import my windows based 4.2.0.124 datbase directly to my acs performer 4.2.1.15.3 device? another sound requires any action to change the database corresponding to the device windows version after windows-based.

  I could see on the device under the restoration of the following parameters (restore 4.2.0 suggest on this backup file to GBA 4.2.1), kindly

  .

  Hello Shema

  One thing you can try.

  [1] rollback patch-3 of the GBA unit. It must be done in CLI/console to acs is. This will bring you acs is ver 4.2.1 version 15.

  [2] restore the database from version 4.2.0 on ver 4.2.1 directly. You must activate a check box for restoration. [see the attachment, restore the section]

  [3] then apply the Patch 3 on GBA, after a successful restore.

  Try the following steps.

  Thank you

  Nelson

  PS - Please note useful messages.