Database persistence of Active Sessions does not

Similar Questions

• Reinstall Windows 7 and now the activation code does not work

  I upgraded my PC with an AM2 chip to an i5.  I had to reinstall windows and now my activation code does not work.   It's like 2-3 years, I forgot when I built the computer.  It installed on my other windows 7 install and created the windows.old folder.  How can I get reactivated?  I used the same code since I built my computer.

  Thank you

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• My computer crashed at Mid-setting level and now my activation key does not work

  I was upgrading from Windows 8 for Windows 8 Pro and my computer is off (power cable disconnected accidentally pass my office).  After it restarts, I went to continue the upgrade, but now my activation key does not work!

  What should I do?

  Hello

  Thanks for the reply.

  (1) how many times have you tried to activate the same key?

  (2) where you bought the product key from?

  See the link below:

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929/en-us

  Let us know if that helps.

• I have Adobe Creative Suite 5 Master Collection. Activation code does not work?

  I have Adobe Creative Suite 5 Master Collection. Activation code does not work when I install it on my Macbook. It installed properly on my Windows PC, however.

  I thought the serial numbers for specific version CS5... Mac - GOLD - Windows, not both

  You sure have a serial number which is good for both?

• I'm trying to convert a PDF to a word document and the system tells me that I must pay.  The account must be active and does not require not renewal until mid-February of this year.

  I'm trying to convert a PDF to a word document and the system tells me that I must pay.  The account must be active and does not require not renewal until mid-February of this year.

  Hi louiset79309343,

  Have you tried the https://cloud.acrobat.com/exportpdf online option?

  I checked your account, you have an active subscription for the service to export it to Adobe PDF format.

  Kind regards
  Nicos

• Active state does not not in the start menu

  Hello

  I'm trying to implement a simple menu of Bootstrap, it works fine except the active component does not work.  That means that when I loaded the page in a browser, I can click on the different links in my menu and the browser will take me there, but does not change the display 'Active'.  I use bootstrap.css, jquery - 1.11.2.min and bootstrap.js.  I even tried to make a new HTML page and a menu "bootstrap" fresh load in it - no luck.  I'm at my wit's end, so any help will be much appreciated.  Here is my code, HTML and CSS.

  <!-collect the nav links, forms, and other content to alternate->

  < div class = "navbar-collapse collapse" id = "defaultNavbar1" >

  < ul class = "navbar-nav nav" >

  < class li = "active" >

  < a href = "inside_page_1.html" > inside Page 1 < span class = 'sr-only' > (ongoing) </span > < /a >

  < /li >

  < li > < a href = "inside_page_2.html" > inside Page 2 < /a > < /li > ""

  < class li = "dropdown" > < a href = "#" class = "menu drop-down-turn" data-toggle = "dropdown" role = "button" aria-expanded = "false" > drop < span class = "circumflex accent" > < / span > < /a >

  < ul class = menu "drop-down" role = 'menu' >

  < li > < a href = "#" > Action < /a > < /li >

  < li > < a href = "#" > another action < /a > < /li >

  < li > < a href = "#" > else here < /a > < /li >

  < class li = "divisor" > < /li >

  < li > < a href = "#" > link separate < /a > < /li >

  < class li = "divisor" > < /li >

  < li > < a href = "#" > a more separate link < /a > < /li >

  < /ul >

  < /li >

  < /ul >

  .NavBar - default .navbar-nav > .the > a.

  .NavBar - default .navbar-nav > .the > a: hover,

  .NavBar - default .navbar-nav > .the > a: focus {}

  color: #00B 309;

  background-color: #FF0004;

  }

  It doesn't work if you manually change the location of the active class, the menu on each page.

  Or you can do it with pure CSS code

  Indicator of persisting in the Menus - Page http://alt-web.com/

  Or do it with JQuery code.

  Nancy O.

• Active state does not properly in Chrome

  Hello

  I recently exported the site I created in HTML and everything seems to work well. The only problem I encounter is that active State does not work in Chrome. When I scroll to the bottom of the page, the color of the active state is not reflected. This does not work in IE, Safari and Firefox. Really need this to be resolved soon. Help, please!

  Thank you!

  Ryan

  Hi whyax84 and Zak.

  Download Yes it indeed solved the problem for chrome. Thank you very much!

  Kelvin

• Activation code does not work

  I bought a computer used compaq laptop with XP Professional.  It's a phone company of Ratheon.    I was not provided the CD original windows XP.  I need to reload the operating system, so I used an other XP Professional CD to install the operating system.  Now the activation from the bottom of the laptop does not work.

  I called the phone number on the activation of windows page, and who does not.
  Because I don't have the original windows XP Professional CD for this laptop, how can I activate windows?

  Hello

  you have the right installation with Windows XP Professional CD, then you will be able to use your product key from the bottom of the laptop.

  Here you can see some COA labels:

  https://SkyDrive.live.com/?CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21113#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21198

  How you can see on the photo - the COA label is for Windows XP Professional OEM, then you must use with Windows XP Professional OEMCD.

  Here you can see some of the labels cost another:

  https://SkyDrive.live.com/?CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21113#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21199

  The COA label is for Windows XP Professional FPP, so you cannot use the Windows XP Professional OEMCD.

  You can try calling the 'Microsoft Activation Center:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

  and tell the operator your product key - he could tell you what Windows XP installation CD to use with your product key.

  LC

• When you perform the Windows Vista phone activation, it does not connect to a real person, said, "technical problem, contact later.

  Original title: I have activation of windows vista problem. When I go through the activation of the phone, it does not connect to a real person. simply said, 'technical problem, contact later.

  I have the problem of activation of windows vista. When I go through the activation of the phone, it does not connect to a real person. simply said, 'technical problem, contact later. Microsoft India has no real people to answer calls? My product is boxed CD purchased at retail store.

  Hello

  Thanks for posting your question in the Microsoft Community.

  I'm sorry to know that you are facing problems to activate Windows Vista and communicate with the support of the Activation.

  It would be useful that you could answer this question to help you further.

  What happens exactly when you try activation online? You receive messages or error codes?

  Here are a few articles that will provide you with information about the execution of activation and fixation of any problems associated with it.

  How to activate Windows Vista

  Resolve activation problems

  If you are unable to contact a live person to perform Windows activation, you can contact Microsoft Customer Service and check if that helps.

  Technical support of Microsoft India

  How and when to contact Microsoft and support Customer Service

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• I had to reinstall the operating system on the computer of my cousin... Windows Vista Home Premium and now the activation key does not work... Message is already key indicators

  the computer in question is anAcer Aspire 4720Z activation key is: * Remove *.

  Hello dandy175,

  This is perfectly normal. Using just the telephone option to activate.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  Either way, edit your message and remove the key data product until someone steals! Never enter the details key product or email addresses in the messages of the forum. It's for your own safety.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• internet activation key does not come when you buy a computer

  I installed mcafee on my system, however e computer has detected Trojans and worms, he asked me to remove them I agreed, but what is worrying is that the internet protection, i.e. to request an activation key and to get his ky I need to buy, my question is really, why when I scanned my pc with mcafee It has not detected any viruses, but still a message keeps popin telling me to kill a virus, how do I get rid of this and what is an activation key and whyhavent mcafee detected viruses

  Hello

  you are infected with malware

  an anti-virus do not find anything

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 8 began to harass for activation, but does not turn on

  I bought and installed win8 on my desktop 1 year ago. Because about 1 month ago it will periodically suspend any program I'm running with a screen that says:

  Activate Windows

  Windows cannot enable right now. Try to activate windows later. If the problem persists, please contact Microsoft customer online to activate Windows. »

  Then I click the Activate button. A few small points of spins in a circle, THEN nothing IS is PAST. I click on Contact Microsoft Customer Service and Support online and nothing DON'T get PAST. I have it EVERY TIME I AM being HARASSED BY THIS SCREEN. So I just click on the top left corner of the screen to remove it and continue with what I'm doing BUT IT ALWAYS COMES BACK.

  My internet connection is fine.

  When searching online I discovered that you can run the phone activation by running slui.exe 4 so I do. After you have selected UK as my country of residence, this error "an error has occurred. Alternatively, you can contact Microsoft by phone to help solve this problem. " When I close this error box activation of the window by window phone appears and tells me what phone number to call, and gives it me the numbers to provide when asked to step 2 of the process: 1 2 3 4 5 6 7 8 9. This unsurprisingly DOES NOT WORK WHEN I GET IT on THE PHONE.

  I CAN'T PUT INTO WORDS HOW MUCH AN INCONVENIENCE IT IS FOR ME AND MY FAMILY.

  I want to talk with a man on the phone. Despite the various messages appear telling me IT IS No. WAY TO TALK to someone to SORT THIS OUT.

  I upgraded from xp for win8 and it was without a doubt the system of exploitation of bugs mounted more unstable I've ever used (and I've used windows ME)

  PLEASE SOMEONE HELP ME.

  Hello

  You can contact the Microsoft Phone activation service and check if you are able to get your copy of active Windows.

  How to activate a Microsoft product using Microsoft Product Activation Center: http://support.microsoft.com/kb/950929/en-us

  Thank you.

• Acrobat activation 11 does not download pro - pro - just standard and then not turn

  My old computer crashed.  When I go to website and download acrobat pro, 11 it installs 'standard', then activation numbers are valid but product not on the computer.  Also had on laptop but it disabled to try to put it on the desk.  did not work.  now, what

  Download the acrobat Installer xi pro software:

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• NoSQL Oracle database charger with EE last does not work

  I am unable to run the NoSQL Oracle database loader to load data at: http://www.oracle.com/technetwork/products/nosqldb/documentation/index.html which is included in the documentation with the latest download of Oracle NoSQL. I downloaded the EA on my Unix machine and have the JAVA version:
  race of '1.7.0_17 '.
  
  (I'm under KVlite. I was able to run the Hello Big World Data example).
  
  This is step 6 in the Readme.txt file that I can't run.6. To load the contents of the tweeter to the Bank to run this command:
  $java - cp SAMPLE_HOME/OLH/ONLH/deploy/onlh.jar; SAMPLE_HOME/OLH/ONLH/lib/NoSQL/kvclient-1.2.123.jar oracle.kv.sample.Loader-i SAMPLE_HOME/OLH/ONLH/deploy/airline_tweets_search-03-01-2012-082206.xml m ' < username > US ' - n "username <>" - v "< user name > < userID >" d "|" xml t
  
  I have the tweets.xml of the airline and the jar two files onlh.jar and kvclient - 1.2.123.jar in the deploy directory. When I unzip the package does NOT contain the HLO directory (as shown in above command) if it is a question with above. Also; use the JAVA throw errors in above.
  I ran the following:
  
  [deployment cloudera@localhost] $ java - cp onlh.jar - jar kvclient.jar oracle.kv.sample.Loader-i airline_tweets_search-03-01-2012 - 082206.xml - m ' < username > US ' - n "username <>" - v "< user name > < userID >" d "|" xml t
  
  My output:
  
  11gR2.2.0.39
  
  (I don't get a validation error message invalid as described in examples of java files. I tried many variations that precedes. In addition, the sample in the README.txt step 6 also does not align with the documentation available in the java file < tagname1 > < tagname2 > use. I am able to run step 5 to see the use of arguments.
  
  I'm out of options on how to solve this problem and would appreciate some advice asap for a demo that I build. I certainly need to have this job so I can load my own cvs (with a few tweaks to the arguments). I'm beginner JAVA Programmer so explanations with examples are greatly useful.
  Thank you

  >

  [deployment cloudera@localhost] $ java - cp onlh.jar - jar kvclient.jar oracle.kv.sample.Loader-i airline_tweets_search-03-01-2012 - 082206.xml - m "US "-n ""-v " " d "|" xml t

  The file README says to the kvclient and the onlh.jar - cp, not onlh.jar in cp and the kvclient as the - pot arg. If you move the kvclient.jar to the - CP

  only.jar:.../kvclient.jar - cp

  It will work.

  Charles