Database problem help

Similar Questions

• The payment change ADOBE info Web page fails - I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  catsrock

  Great salvation,

  We are sorry for the inconvenience caused to you!

  I recommend you contact customer service regarding this issue.

  Kind regards

  Rahul

• BlackBerry smartphone how to increase the size of database - please help please please

  Hi all

  I'm new to the world of blackberry and am stuck with problems. The first is that the size of the database of my BB 9000 is 812.3 K, which I think is default. Now, it's full I get many emails on my phone. For this reason my call logs is deleted automatically, and all the data that I left in the call logs are for the last 24 hours only.

  I need help to understand if it is possible to change the size of the database, or if my emails can be downloaded on my media card that is 2 GB. If none of the above is possible then please tell me a solution I need to have for at least 1 week call logs.

  Help, please

  Jousset

  jousset wrote:
  Sorry for that database thing... I was wrong... Call log stores only 20 entries. any idea y than what is happening?

  Look at your Messages folder > Menu > view folder > Call Logs... now do you see more than the last 20 calls?

• need to connect and configure the oracle on windows 7 vmware professional database? Help, please?

  Hello

  In fact, I wanted to set up ORACLE with Informatica Power Center (ETL) database connection. But my problem is that I installed the oracle database with grid inside VMWARE with the RHEL operating system. But what INFORMATICA etl software is installed outside VMWARE, which is located in WINDOWS 7 Professional.

  I would like to know how I can access and configure oracle database of windows 7 Professional as oracle database is installed inside VMWARE RHEL 6.5 operating system.

  Help, please.

  HERE'S HOW I SOLVED IT: -.

  
  Here is the url for the NAT that could become useful for other institutions.

  How to Setup Port Forwarding in VMware Workstation 9 | Virten.NET

• Growth of database problem

  We have a problem with HFM by which the database increases each month.  We notice that
  most of the scenarios where we might have to do a force to translate or to consolidate
  with data and sometimes a consolidate all this.  I know that consolidate it all the
  is not good, but it is sometimes necessary for some scenarios.  I expect to
  growth of this with things based on dormant entities,
  etc, but not insofar as I see in the DB.  Doing some more
  investigation, it seems that we have a significant amount of zeros in these tables
  where we see growth.  For example, our scenario scheduled for 2014 has 7.4
  millions of documents of which 5.5 million are zeros (tran type 32) hard.  I have
  don't know much about these hard or derivative zeros, beyond because they do
  no result I think that actually enter zeros.  If I do an extract from the data
  of the whole of the year and the scenario, I get a few zeros but not anywhere nearby
  from what I can see in the database.  No one knows what might happen?  Help or direction would be so appreciated. Thank you.

  Hello

  Please check if you have accounts for the calculation of the zeros.

  You can limit the flight of zeros in your application by using the HFM rules file.

  Let me know if you need more information.

  Kind regards

  Hanane

• Database problems?

  Hello

  I've recently upgraded from 5.0 to 5.5 U1 (including correction of bug heartbleed) and will have what I believe are from the database.  The services start and I am able to connect through the vSphere client and web interface.  The problem comes when I try to create a new virtual machine.  All the steps to cross, but it hangs at 100% when he says 'Configuration of the Virtual Machine to copy' and my vSphere client disconnects.  Then, I get an error: "connection to the server '< servername >' has been lost while finishing the last command.  Confirm that the command was completed successfully.  Then I get "sessions of the application is not valid.  Looking at the vpxd -n.log, I see:

  MEM > 2014-04-29T 14: 05:34.531 - 04:00 [warning 07000 'Default'] [VdbStatement] SQL execution failed: insert into VPX_TABLE (TABLE_NAME, Column, COL_TYPE, COL_LEN, PK_FLG) values (?,?,?,?,?)

  MEM > 2014-04-29T 14: 05:34.531 - 04:00 [warning 07000 'Default'] [VdbStatement] run time: 0 ms

  MEM > 2014-04-29T 14: 05:34.532 - 04:00 [warning 07000 'Default'] [VdbStatement] given the driver diagnosis are 07002:1:0: [Microsoft] [SQL Server Native Client 11.0] incorrect field COUNT or syntax error

  MEM > 2014-04-29T 14: 05:34.532 - 04:00 [warning 07000 "Default"] binding settings [VdbStatement]:

  MEM > 2014-04-29T 14: 05:34.532 - 04:00 [error 07000 'Default'] [Vdb::IsRecoverableErrorCode] Impossible to recover from 07002:0

  MEM > 2014-04-29T 14: 05:34.532 - 04:00 [error 07000 "Default"] SQLError [VdbStatement] has been lifted: "ODBC error: (07002) - [Microsoft] [SQL Server Native Client 11.0] COUNT field incorrect or syntax error" is returned when you run the SQL statement "insert into VPX_TABLE (TABLE_NAME, Column, COL_TYPE, COL_LEN, PK_FLG) values (?,?,?,?,?)".

  MEM > 2014-04-29T 14: 05:34.539 - 04:00 [error 07000 'Default'] [VdbSchemaLoader::StoreTableSchemaInfoToDB] error insertion in VPX_TABLE for table VPX_NW_ASSIGNMENT: "ODBC error: (07002) - [Microsoft] [SQL Server Native Client 11.0] COUNT field incorrect or syntax error" is returned when you run the SQL statement "insert into VPX_TABLE (TABLE_NAME, Column, COL_TYPE, COL_LEN, PK_FLG) values (?,?,?,?,?)".

  MEM > 2014-04-29T 14: 05:34.539 - 04:00 [error 07000 'Default'] [VdbTableDef::PopulateSchemaInfo] unable to retrieve the column information for the table VPX_NW_ASSIGNMENT. Usually, it is the result of an incompatibility between the DB scheme and construction product.

  MEM > 2014-04-29T 14: 06:12.830 - 04:00 [07000 panic "Default"] (level 2 of the recursion of the newspapers) [VdbTableDef::PopulateSchemaInfo] out. Could not retrieve schema information.

  I have setup a service account for the following services: "VMware VirtualCenter Management Web Services", "VMware Virtual Center Server", and "vSphere VMware Update Manager Service". "  The account is a domain account and is a member of the local Administrators group.  It seems that the service doesn't have access to write to the database, but when I look at the effective permissions of database for the service account, there a lot of ALTER and INSERT permissions.  Any help would be greatly appreciated.

  TIA

  It turns out that the service account did not have the default schema of dbo.  That solved the problem

• load the xml file into a database to help table of travel point

  Hello

  Someone help me please with a possible approach. I have an interface for APEX users where users can download a file xml in apex table wwv_flow_files using the element to browse with a button "submit". Now, after loading the xml file in the wwv_flow_files table. I need to read and load the xml data into a table sample_tbl. I'm using the version of Oracle APEX 4.0 and Oracle 10 g R2 database. Here is an example of XML file to load. Please help me possible suggestions.

  <? XML version = "1.0" encoding = "UTF-8"? >

  < dataroot generated =... >

  < MySample >

  < KeyId > 1234 < / KeyId >

  eddskc < KeyName > < / KeyName >

  < scheduleDate > 2013-06-16T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-06-16T 08: 00:00 < / StartTime >

  < EndTime > 2013-06-16T 08:30:00 < / EndTime >

  < / MySample >

  < MySample >

  < KeyId > 5678 < / KeyId >

  jppdf < KeyName > < / KeyName >

  < scheduleDate > 2013-05-19T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-05-19T 08: 00:00 < / StartTime >

  < EndTime > 2013-05-19T 08:30:00 < / EndTime >

  < / MySample >

  < / dataroot >

  Thanks in advance.

  Thank you

  Orton

  orton607 wrote:

  My sample_tbl has a start_time field and its data type DATE.

  Good.  Be sure to always store dates as the DATE.

  The application (in this case, APEX) needs to format the date date type in the appropriate human-readable format.

  The problem with the incoming data is the 't'.  You will need to convert a space using REPLACE() in the framework so that your SELECT statement

  From there on, conversion to the DATE data type is simply

  to_date( replace( start_time_str, 'T', ' '), 'YYYY-MM-DD HH24:MI:SS') as start_time
  

  And, just in case where, the conversion of DATE for the desired format:

  to_char( start_time, 'MM/DD/YYYY HH12:MI:SS AM')
  

  Although, I'm 'hours' as being left-padded with zeros... Am I looking for how / if you can get rid of the zero prefix (0).

• Unable to connect to remote oracle database!  Help, please!

  Hi all-
  
  I am a new user Oracle and you are allowed to access a remote Oracle database, however I have problems with the installation/configuration program! I downloaded the driver Oracle and the Instant Client (11.2.0.2.0) because I need to use Microsoft Access for the data access (the Access database is already configured to the correct Oracle database). I'm under the impression that, to do this, I need to be able to use the ODBC Administrator to get all set up. Note: Im working on Windows XP.
  
  I have questions:
  
  -I don't seem to have installed Netca (which seems to be the recommended method to configure a connection). I have manually adjusted the TNSNAMES file. ORA file so it matches the database, but I'm not sure what would be my next step.
  
  -When I open SqlPlus it wants a username and password, and I tried the default settings and got an error each time. I must first use SqlPlus, or establish a connection via ODBC first?
  
  -Also: ODBC requires a TNS Service name, and I'm not sure, where this is established; something that would give the database manager?
  
  I really just do not know how to configure this remote connection! I continue to run with obstacles and really want a reference "step by step" on the way to do it, if there is such a thing. Any help or additional reference material would be appreciated! I ran by the content of the forum, but have not been able to decode the jargon! Thank you very much in advance.
  
  Marilyn

  MsMonroe wrote:
  Hi Ed-

  I use the Oracle's ODBC driver. I think there may be a problem with the TNSnames file because I tried to add this file as a"Data Source", and he also said that a connection could not be established. What do you mean by the MS implemented? A configuration of Data Source?

  By MS implemented, I was referring to the MS ODBC for Oracle driver, against the Oracle ODBC for Oracle driver.

  The "source of data file' has nothing to do with the tnsnames file. The ODBC Manager retains its DSN definitions in one of three places. "User DSN" is stored in the HKEY_LOCAL_USER registry, the "System DSN" definitions are stored in the HKEY_LOCAL_MACHINE registry and 'FILE DSN"definitions is stored in a file... I don't remember exactly where or what it's name is as I have (when he is forced to deal with odbc) just keep things simple and use "system dsn". But these aren't all the definitions of ODBC, Oracle tnsnames file.

  The link between the ODBC DSN and the tnsnames.ora presents itself as a property of the ODBC definition. Suppose you have this for a tnsnames.ora entry:

  houston =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = vmlnx01)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SERVICE_NAME = orcl)
      )
    )
  

  Then
  -When you set up your odbc dsn, if you use the MS for Oracle driver, you must specify 'houston' as the 'server '.
  -When you set up your odbc dsn, if you use the Oracle odbc driver, you must specify "houston" as "the TNS Service name".

  >

  Im going to try to post a modified version of the content of my TNSnames.ora file (for some reason any the "content is not allowed ' by the forum), but I would like to get some comments on whether the structure of the content may be the problem.

• Tecra R840-S8450 - power problems - help with Blink Codes

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

  Of course quite here, is that no one from Toshiba has the manual to find codes?

  Posted by dgwbdavid
  

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

• OfficeJet Pro 8600 Plus connection problem - HELP!

  I have a strange problem: after a few hours, the communication link fell between the computer and the printer.  In this case, IE becomes unusable and not connect what either.  It is replicated on three XP Home machines.   The fourth, a vista ultimate machine, doesn't seem to be affected (yet).  I get the error "the computer scan is disabled.  It cannot be reactivated.  At this stage I can't print.  I can reach the web server embedded on the printer via firefox and can still surf using firefox.  I can ping the printer, but again, once the connection is dropped, no printing or scanning the computer.  The only thing I found that solves this problem (temporarily) is to restart the computer, which starts the cycle again.

  last night, I installed the software on a XP machine and the laptop to test when the connection has been lost.  They lasted from 19:00 on Monday until what I came at 17:00 Tuesday.  The machines were not used.  Once I started using (firefox only), and then they abandoned the connection in a half hour apart around 19:00.  The other XP machine lasted from 19:00 until 07:00 TUE MON, when my wife started to use it and then noticed he fell somewhere between 7 and 09:00 on Tuesday.  A 11:00 TUE restart ran OK until 22:00 Tuesday when the connection has been broken again (and IE is now dead).   The Vista machine works since 19:00 Monday (930 pm TUE) so far and seems to hold.

  printer cable, at 100-a lot of router link speed, IP address static, (also tried 10-half)

  router dlink di-655

  two XP machines are wired, vista is wired and last xp machine is a laptop on the wireless.

  I exchanged cables, rebooted and reinstalled several times.  I have a file a long mile on the telephone support line.  They couldn't remedy.  I asked this to escalate, but who knows when I will get an answer.

  I have enabled firewall - integrated XP

  I uninstalled the antivirus software

  I even put in place with support like crazy suggestions change the channel of the router (uh, it's wired!)

  an xp machine had a 4215 AIO connected via the USB port and the other prints to him via the network, but the printer was deleted machines on a network.

  I can ping 127.0.0.1, which is supposed to indicate that the tcp service is OK.

  I do not have reset winsock... I see a machine being bad, but three?

  malware / virus scan shows no problem.  Once again one perhaps, but three?

  The only thing I can think is that there is something in the network stack XP which is in conflict with the new software of 8600 hours pass.  There may be an operation of the poll which lights up then dies after a while, then he kills IE he is dying.

  When the printer works it's great, but the restart is not a permanent solution to this.

  any suggestions would be greatly appreciated!  I am confused and therefore support.  They send him to the genius, but who knows when they will answer.

  Thanks in advance.

  Our investigation into this issue, we found a workaround solution that will help with this.

  Follow the steps below.

  1. Please go to Hp software-> Printer Preferences - > Maintenance-> advanced settings tasks

  2 selects the second radio under 'Alerts Show', 'don't show me alerts ink when printing.

  3. now restart your PC to make sure that the setting is saved.

  Enclosed is the screen.

  

  Here's a useful support document that can also help.

• Satellite P20 & Orinoco card WiFi problems HELP?

  I hope that one of the users on the Board of Directors may be able to advise me.

  Details of hardware/software/Os & driver are listed below for reference.

  Wired LAN works fine and connects to the small network of 10 Base T ethernet with Internet connection sharing. IP addresses are automatically assigned by DHCP on the gateway computer.

  Problem is when I try to use or wireless LAN configuration to connect to an existing gateway used by two other laptops. Windows detects the device without problem but will age for the acquisition of the IP and advises when there is limited connectivity (fact ConfigFree). A connection is established and the signal strength is excellent but I am then unable to connect to the network via wireless connections or wired. The same problem arises even if I assign the IP address manually for the wireless card.

  When I then disable the wireless card, then I can connect through the LAN port cable again.

  I use Windows to configure the wireless card. The manual suggests using the Atheros Client Utility but all options on this are greyed out!

  The details are as follows:

  PC: Satellite P20-S103 Mod; PSP20E-00V7V-FR

  OS: Windows XP Media Center Edition SP2

  LAN card: Built in, identified by Windows as Realtek RTL8139/810 x Family Fast Ethernet NIC driver 5.606.811.2003 Version

  WiFi network card: integrated, identified by Windows as Orinoco PC Card Driver version Agere Systems 7.62.0.390 Mini

  Wireless Access Point: 3Com 3CRWE747A 128 Client 802 network Type. 11 b = Infrastructure.

  Atheros Client Utility: Build Sep 26 2003 Version 2.4.2.18

  Hope you can help. Looking forward to you with suggestions.

  Thank you

  Graham

  Hi Graham

  In my opinion, it is not a big problem. In my opinion, you should try to disable an option in the tool ConfigFree. Please start ConfigFree and go to map of device settings. There you can find the background option called Enable Wireless when cabledisconnect occurs. Check if this option enabled. If so, disable it and try again to make the same connection.

  I hope it helps.

• 2008 mac Pro Apple Raid card problems, help!

  Hello, I have a mac pro 2008 with a raid set up. I want to get rid of all old raid together upwards and instead put a new ssd in the first Bay. The computer cannot read it because I think that it is always configured as a raid. Does anyone know how to make the available drive bays to new readers? You're help would be highly appreciated. I want to take the Apple Raid card so I can have an additional PCI port and I also want to get out the discs four raid. Just so I can put in a single ssd! Thank you very much.

  When you remove the Apple RAID card, readers who were searched will be unreadable. You need to make backups before time, because there is no way known to them read differently.

  There is a data cable, called the iPass cable connected to the motherboard to the RAID card. You must remove this cable when you remove the RAID card and reconnect the plug corresponding on the motherboard. Once you do this, you get four bays returned as SATA bays and can install any drives that you like. The problem with a lot of SSDS is that they are 2.5-inch form factor drives and may not fit on a standard sled. Users have used an IcyDock (in the 2008 version and earlier versions) or the newer technology adaptadrive:

  http://eShop.MacSales.com/item/NewerTech/ADPTADRV/

  ... to get the alignment and attached straightened.

• Sony Vaio Duo 11 screen burn-in problem HELP!

  So I have the above mentioned material element and overall it is very good.

  BUT I have a problem which becomes more noticeable from day to day.

  When you use an application for a period of time, say 10 minutes +, whether subway or office back to the main menu of tiles Win8 show up with a burn-in of the previously closed app. This "burn" doesn't go away unless I turn the computer off for about 10-15 minutes. But using the PC as usual always brings the same effect.

  I am not running any unusual software or configurations bizaar. I tested this on different levels of brightness and 40 Hz and 60 Hz, but the problem still persists.

  Nowhere can shed some light on whether this is a normal occurrence on the Duo 11? If this is not the case, what steps to follow recommended action?

  Thank you!

  Someone has some feedback to help solve this problem?

• Setup Motorola Atrix with Google TV via a HDMI device problem, help?

  I'm curious to know if anyone has had problems with implementation of devices via HDMI or using the Motorola Atrix (I'll be crossed this announcement on the forums Android and Motorola too to see what response I'll be there too).

  "After connecting my Atrix, turned to the Google TV (29') using the HDMI cable I got with the phone, I go to 'Settings' > 'Video input' > HDMI settings" > "Device list" > and click on "Enable", I get an error message that says:

  No HDMI devices have been found. Please check the connections.

  Thanks to a default function I chose, the "remote control" screen on my Atrix.

  I tried all four cards HDMI on the TV and received the same error message.

  Anyone would be able to help me solve this?

  I have the Sony NSX24GT1 24 and my phone is a Motorola Atrix Mobile phone black MB860 running on the Android 2.3.4 version.

  p.s. I really like my phone and I really like my TV and the possibility of using the two together! I really hope I can get help with this. Thank you!!

  Fixed! I had to press the input button on the very complicated, heavy Google TV remote control button (bad design).

• LabVIEW database problem: create a database of the user-defined fields

  I am trying to create a new table in Access database opened by an ODBC connection from information between a table stored in the database, but whenever I try to create the table, the toolkit of connectivity of database of Labview VI to create a table get up a mistake costed

  «Exception occurred in the Microsoft OLE DB provider for ODBC drivers: syntax [Microsoft] [ODBC Microsoft Access driver] error in field definition.» "in NI_Database_API.lvlib:Conn Execute.vi-> NI_Database_API.lvlibB tools create Table.vi-> DatabaseCreateHeaders.vi.

  I think it's because I'm trying to re - create the database column variable type, but I don't know what I'm doing wrong.  Everything seems fine data types, and everything works as long as I use a constant to create database columns.  I even tried to put all the information in the labview set, format, which changed to a variant and redefined it as the labview database column type.

  I have attached a simplified VI and a picture of what I'm trying to do, but I'd appreciate any help I can get.  I hope that I have pulled all my hair at the time where a certain answers!

  

  Make sure that your domain names are not of the reserved words