dataProvider.removeAll () is actually compensation for my database. It's bad.

Similar Questions

• Use of the COMPENSATOR for SSD

  Can someone enlighten me on how to use the TRIM for my SSD function? According to Windows, the TRIM is enabled. What I need to know, is if it is a function that is called and executed automatically by the system? Or is this something that I need to manually call as a routine preventive maintenance (similar to the use of defragment)? Thanks for any advice.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Useful information for SSD users with NVIDIA motherboards:

  Even if the Trim is enabled in Windows 7, mothers nForce NVIDIA cards do not send the order to the SSD TRIM.

  You can uninstall the well Nvidia controller in Device Manager and install the controller IDE from Microsoft, that allows to send commands to COMPENSATION for SSDS.

  Head to the Device Manager (menu start open, type Device Manager), and click on "IDE ATA/ATAPI controllers" and you will see 3 Nvidia Serial ATA Controllers. Right click on one of them and click on 'Properties' and go to the tab 'Pilot' 'Update Driver '. Click on "Browse my computer", then "Let me choose". You will see the option to choose "Standard dual channel PCI IDE Controller". Click this button and click on 'Next' and let it install.

  Do the same for the other Nvidia controllers in Device Manager, and then restart your system. After you have installed the controllers, you will be asked to restart again.

  SSD will have now a slight performance gain with the TRIM command, and ordinary hard drives also have a slight increase as well.

  I have an ASUS P5N - D 750i SLI motherboard and now my Trim actually works.

• How to overcome the problem of classification in mssql. for every database we can have different rankings?

  I'm having the problem of the rankings with database. When I run the script from db, it gives the error of the variables in the store procedures, functions, triggers this scalar variable must be declared even if its, n as soon as I write with a similar case in all place for variable with which I get error this error go. but the entire database is like this how can I change the case thanks to the DB. Is there any solution for this... If anyone knows about it please give your feedback... Thank you

  This forum is not for asking database questions.

  See the SQL Server here forum: http://social.technet.microsoft.com/Forums/en-US/category/sqlserver.  SQL Azure forums are here: http://social.technet.microsoft.com/Forums/en-US/ssdsgetstarted/threads

• Error on the server after restoring the backup: "could not allocate space for object database because the 'primary' filegroup is full.

  Original title: Hi Experts,

  Hi Experts,

  Pls help me...
  When I tried to restore the backup of one of my site in my server, I got error like "cannot allocate space for object database because the 'primary' filegroup is full"... Microsoft SQL-DMO(ODBC SQL State:42000))

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

• Is the function of automatic update of Windows found in the use of control panel of your compensation for the use of the Internet from my ISP?

  Original title: Windows updates

  Is the function of automatic update of Windows found in the use of control panel of your compensation for the use of the Internet from my ISP? If so, how? In addition, how to hide an update, I don't want to? For example, I use (and I'm happy with) Windows Internet Explorer (v7), but receive reminders to update update to Internet Explorer v9, which I don't want.

  Is there a way to prevent Windows Update for sending this reminder in the future?

  Geoff

  Hide and Yes will use you PSI data usage. It depends on how much the updates install you, on the amount of data it uses

• How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  How or there is no model code keep update/sync the local database indexedDB for MySQL database online?

  Unfortunately there is no direct connector for an application of WebWorks to a back-end database. You will need to do, is to have some middleware web server (Apache, Node.js, etc.) who manages a web service that you can make an HTTP request to and GET, POST, UPDATE, DELETE data. Middleware and then transmits commands to the back-end database and returns the results to the finished device.

• Upgrade of Oracle EBS base 10.2.0.4 for Oracle Database 12 c

  Hi gurus,

  We are in the process of upgrading our EBS Oracle 10g database to 12 c and so below are the steps we took to upgrade the database with dbua 12 c

  We have improved our database 10g of 10.2.0.4 to 10.2.0.5 compatible for the direct 12 c with dbua upgrade

  1 - install the Oracle 12 c software

  2. run the file from Oracle EBS environment that set the ORACLE_HOME and ORACLE_SID, but not ORACLE_BASE for the database that is upgraded

  3 - Go to the ORACLE_HOME\bin 12 c and run. / dbua

  4 - 12 c dbua GUI appeared, but this isn't picking the 10g database in the Source ORACLE_HOME

  What could be the cause and how is - this solve

  Kind regards

  Hello

  Check the/etc/oratab file.

  Have the correct entries?

  Kind regards

  Bashar

• What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

  Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.

  Hi all

  We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.

  I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.

  can anyone share the ID document or information related to it.

  If OS RHEL 6 update 4 to 6-7 update patch

  (1) is it compatible

  (2) bugs or problems reported

  (3) in addition to the binary link again than the DBA to perform any other

  Thank you

  Hello

  6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4

  Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)

  -Jonathan Rolland

• oratab for R12 database 11g on Linux

  Hello:

  This 11.2.0.3 on Linux database is migrated to HP - UX. I was checking oratab under/etc (on Linux), but he has no lines. Instead, / var/opt/oracle/oratab has this saved SID. Would you please answer my questions below:

  I would add that SID to the/etc/oratab?
  How is it his work always with/etc/oratab vacuum?
  Why is/var/opt/oracle (on Linux)? I didn't copy this to the target (Linux).

  Thanks and regards.

  On Solaris, there "/ var/opt/oracle/oratab.

  On other operating systems, it is ' / etc/oratab.

  The oratab file contains lines similar to the following, which are used to identify the SID and the directory corresponding Oracle for each database or the Automatic Storage Management instance on the system:

  SID: oracle_home_directory: [Y |] N]

  Stop and start the Oracle software

  I would add that SID to the/etc/oratab?

  Yes.

  How is it his work always with/etc/oratab vacuum?

  The database would normally work if the entry is missing or corrupted. However, if you try to patch/upgrade to level the instance he complains of the missing entry.

  Why is/var/opt/oracle (on Linux)? I didn't copy this to the target (Linux).

  Check the timestamp of the file, maybe it was edited/modified by someone else?

  Thank you

  Hussein

• Why anyone would actually PAY for anything whatsoever to this company wjhen is NO suppport before the purchase of a forum, with the exception

  Download free trial does nothing and it seems that they want to charge you $15 per month and still there is NO available support what so ever. I'd be a fool to allow a company to debit my credit card of freakingh and I can't actually talk to anyone. I lost a weeks time value to try to get the trail of day 30 FREE Acrobat CC just to see if I can indeed modify a PDF file. With all these questions, try to get the software, it will be a cold day in hell day until I have actually pay for something from a company that has no information other than a forum real contact.

  Hello

  Apologies for the inconvenience, download Acrobat DC test: desktop applications Adobe Creative Cloud | Adobe Creative Cloud

  Please also visit the links below:

  Download and install a free trial Adobe Creative Cloud

  Solve the problems of downloading and installation of Adobe Creative Cloud

  Error download or update Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Bani

• (1) I bought a Lr DVD and use Lr after registering (serial number). Question 1: Why should I get a monthly subscription?  Question 2: if I take a monthly subscription can I get compensation for what I paid for the license?

  I bought a Lr DVD and use Lr after registering (serial number).

  
  

  Question 1: Why should I get a monthly subscription?

  
  

  Question 2: if I take a monthly subscription can I get compensation for what I paid for the license?

  The only advantage is that,

  for example, if you bought 5 Lightroom, you can buy the standalone product Lightroom 6 at a reduced price. That's all.

  Upgrade version LR 6 cost:

  

  Full cost of the version:

  

  If you had bought LR 6 product with serial number.

  If Adobe is launching the next version, you will get discounts if you want to update

• RMAN catalog by default for all databases of the value

  Hello

  I run a catalog RMAN 11 GR 1 material.

  I wonder if it is possible to change a default setting in the RMAN catalog so that he will inherit all new databases.

  For example, I would that all new data entered in the catalog for:

  BACKUP OPTIMIZATION

  REDUNDANCY 7 RETENTION STRATEGY

  Thank you

  Massi

  No, the catalogue cannot "dictate" configurations for databases.  Each database maintains configuration in the controlfile and this can be changed that by rman connection (i.e. rman connection to the database target). The command SETS in rman is used to define a "permanent" for a database configuration parameter but must be issued individually for each database.

  Hemant K Collette

• How to use Flash recovery only for flashback database feature box

  I would use the area of flash recovery only for flashback database feature, which means, the flash recovery area will store only the flashback logs.

  I don't want to use this file system for all other files, such as files of archive log, backups, copies of control files, multiplex redo log, etc.

  is this possible? I want to use this function only for the flashback database option and therefore, I don't want to disturb any existing configuration in my database

  including backup jobs. It will also store the Archives of redo log files in the flash recovery area to use the flashback database feature?

  I can't certainly allow me to have a copy of the entire file system database as my DB size is more than the system recovery flash I have zone files.

  Thank you

  Delphine

  user13312943 wrote:

  Aman,

  I think I was not clear in my question. I'll try again

  My only requirement is to use the flashback database feature (or be prepared to use if necessary). I don't want to create a large file system to use the CRF to store all those files. Out of all the files are stored here a copy of the data files seems to consume more space. I see that these files are classified as transitional and permanent files. I agree with permanent files. I'm afraid that this file system can use more space if I store files of backup to disk. I want backups of databases to go to bands, not on the drive of FRA. Is this possible?

  Thanks for your response

  Okay, well in that case you can use RMAN and push the backups to tape drives. FLB newspapers would be stored on the FRA.

  Aman...

• TCP. INVITED_NODES for two databases in an ORACLE_HOME

  Hello

  I have two databases in an ORACLE_HOME (11.2.0.3) and each database is accessible via the own earpiece.

  Is it possible to allow access to each database only from the IP (different IP addresses for db ech) adressess?

  The TCP parameter. INVITED_NODES (sqlnet.ora) is for any ORACLE_HOME not for specific db.

  Thank you.

  Marian

  It is not possible, other than to install two databases in two different houses.

  As a listener for each database is not necessary at all.

  Also using hard IPs in sqlnet is maintenance subject and should be avoided.

  ---------

  Sybrand Bakker

  Senior Oracle DBA

• How to set the SGA / PGA or memory target for the database

  Hello

  We use on AIX 5.1,6.1, oracle 9i, 10g, 11g

  Currently, we manage the databases on the default memory which was chosen at the time of the creation of the databases.

  Now the application owner want to host multiple databases on the same server, so they ask the

  rough idea on the memory required for each database,

  How we calculate the amount of memory required for each database.

  Thank you

  that recommend the SGA ADVISOR?