TCP. INVITED_NODES for two databases in an ORACLE_HOME

Similar Questions

• Configure two MS for two databases on a single host, EM for first DB cannot open

  Hi all
  
  My 10 g database version 2.
  
  In the beginning, I created a database called "ORCL" and configured the EM to her, not manually of course. and it was working fine.
  Then, later, I found that I need to install a second database called "ORCLDW", and since I have used DBCA to create, EM is configured automatically as well.
  
  EM for ORCL is: http://phoenixbai:1158 / em
  EM for ORCLDW is: http://phoenixbai:5500 / em
  
  the problem is that the EM for ORCLDW works perfectly fine, even if I can't open the EM for ORCL.
  
  When I use 'emctl start dbconsole', it works for a very long time, but still, he tells 'EM for ORCL is started successfully.
  However, when I try to open the URL: http://phoenixbai:1158 / em
  Once again, it lasts very very long and doesn't have to open it.
  
  Then, someone at - it never met the similar situtaiton?
  someone has an idea of what could be the reason? and how to check and fix it?
  
  I thank you very much in advance and wish you all a great weekend!

  PhoenixBai wrote:
  Hi all

  My 10 g database version 2.

  In the beginning, I created a database called "ORCL" and configured the EM to her, not manually of course. and it was working fine.
  Then, later, I found that I need to install a second database called "ORCLDW", and since I have used DBCA to create, EM is configured automatically as well.

  EM for ORCL is: http://phoenixbai:1158 / em
  EM for ORCLDW is: http://phoenixbai:5500 / em

  the problem is that the EM for ORCLDW works perfectly fine, even if I can't open the EM for ORCL.

  When I use 'emctl start dbconsole', it works for a very long time, but still, he tells 'EM for ORCL is started successfully.
  However, when I try to open the URL: http://phoenixbai:1158 / em
  Once again, it lasts very very long and doesn't have to open it.

  Then, someone at - it never met the similar situtaiton?
  someone has an idea of what could be the reason? and how to check and fix it?

  I thank you very much in advance and wish you all a great weekend!

  the default behavior for OEM is that it supports a single database for each host
  If you need to support multiple DBs, use Grid Control.

  BTW - OEM is NOT necessary to run or support of Oracle's RDBMS

• TCP.invited_nodes settings for the entire network

  
  I have a test 11.2.0.4 DB which will eventually become a production DB. I am applying the MARINE DISA to. One of the parameters is to use either the Oracle connection manager or apply tcp.invited_nodes. I have about 100 computers that will access the DB via their client software. What is the best way to apply control STIG. I can't foresee adding all 100 ip addresses in the sqlnet.ora file. Thank you.

  Emad Al-Mousa wrote:

  Hello

  I don't think that 1000 hostnames in your file sqlnet can be easily. If your objective to protect illegal database access, while they cannot access unless you have the name of user and password to one account in the database.

  But if someone does not have the credentials (for the argument, let's say he stole their) he can get to the database from anywhere if the network routing allows.

  And, uh, the OP said 100 jobs, not 1000.  This fault of typing is an order of magnitude difference.

  I feed the pain of the OP.  I also had to deal with the DISA STIG spotted requirements which, in this case, are very short.  Secruity level network (for example invited_nodes of tns) should really be done by the router/firewall. TCP.invited nodes requires constant manual adjustment.  Suppose we go to the effort of registering manually the IP 100.  (The parameter even that accepts several?) One could assume that those are the addresses of the workstations that receive their address from the DHCP server.  So as soon as the administrator creates the list, it starts wrong as data workstations will receive new addresses.  And they will receive them often.  Also, the same environment that requires this solution requires that all windows machines apply to all windows updates "immediately".  So every Tuesday you get a group of workstations is restarted and quite probably get new IP addresses.

  Not to mention the new machines to come on the line and old machines being purchased - all without notifying the ADMINISTRATOR to update its list.

  To the op.  In the light of what I have described above, if your list of 100 workstations all in the same subnet, your job is actually quite easy.  You just need to crack coding these 100 addresses.  You could do it now.  To avoid the question of maintenance I have indicated above, you want to go ahead and list all * addresses of potential.

• Why is there the databases for two Web sites in my appdata roaming default firefox profile folder?

  Www.fling.com _ C:\Users\user\appdata\Roaming\Mozilla\Firefox\Profiles\i4unw84s.default\databases\http_

                                                                                                                                                                        C:\Users\user\appdata\Roaming\Mozilla\Firefox\Profiles\i4unw84s.default\databases\https_cashier.bovada.lv_
  

  Two of these databases of site are 64 KB and io_temp.sqlite files. I want to know how they were created and what information is that are stored there. I know that my boyfriend goes to the website of bovada much, but want to know if he has information of personal connection stored for two of these sites. I know that they are not cookies because I saw the list of cookies and delete the and these files are still there. I really want to know if the only way that the sites Web could be in the folder because he saved intentionally information stored on these sites and if not, then why they are part of a roaming profile?

  Hello, I could not find any documentation on what the data in the profile or an io_temp.sqlitefolder - file would do in firefox (perhaps it was a first version of dom storage or indexeddb).
  If you have questions about the use of these sites by your boyfriend, you should probably talk with him directly about this, instead of finding an answer in this way...

• on the headphones for different databases in the same ORACLE_HOME

  Hello experts, I have a doubt
  
  I installed 3 different databases on the same server that OS is Suse Enterprise 10. Right now, I'm just a listener who registers all the services. The number of connections is great for two of the three databases, so I don't know what could be the best practices for this environment. I have a question I would like you suggestion for me:
  
  DB version: 11.1.0.7
  
  Should I have three listener, one for each database?
  
  Is advisable to have a single listener for multiple instances on the same server?
  
  Are there different between have only a single listener for the instance and have a port for listening, for example?
  
  What about performance?
  
  
  You in advance, I hope that you can guide me.

  Best practices is not not to have multiple databases on a server, based on resources.

  Should I have three listener, one for each database?
  N ° it is quite undesirable and requires more administration.

  Is advisable to have a single listener for multiple instances on the same server?
  Yes. Don't forget the listener is only a broker and there is no permanent connection between the client, listener and database.

  Are there different between have only a single listener for the instance and have a port for listening, for example?

  Yes. The latter is a nightmare of administration.

  What about performance?

  Who cares? The only factors are
  Listener.log becomes too large--> put in place the appropriate cleaning procedures
  The semaphore count is exceeded (Unix) or no more threads can be created (Microsoft Windows95), who will give birth to ora-12500.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• SQL code for combining two databases

  I have 2 databases of individual members on the client's Web site, each database has a table inside. They download the DB files two each night, and they prefer to keep separate.
  
  They would like a directory of MSN users that has all members listed in that document, of two databases.
  
  How can I write SQL code to extract these data all together? Here are the details
  
  Db1: Table A; col1, col2
  DB2: Table B: col1, col2
  
  I used education before Union, but it was for two different Tables in the same database file.
  
  Thank you so much more smart people
  Stephen
  Tallahassee, FL

  Source language:

  I don't know if there are sql tricks that can be applied to ColdFusion, but your question is one of the main goals of capacity of applications ColdFusion query.

  Run both queries, one on each data source. then use QofQ Union them.

  
  SELECT * FROM query1
  UNION
  SELECT * FROM query2
  ORDER BY column
  

  THANKS FOR THIS REPLY, IT WORKS!

• two databases on the same windows machine. Unable to connect to a database.

  I installed two databases(11g) DB1 (ORCL) DB2 (DST) on windows vista. I am able to connect to the ORCL database only and connecting to the DST, I get the following error. The tnsentry is as below.
  I started the listener, and after that the DB service DST, but it did not help. I had created another LISTENER_DST auditor for the database of DST. Please advice if I am missing any action necessary.
  
  
  
  C:\Users\ratan > sqlplus scott/tiger@orcl
  
  SQL * more: Production of release 11.2.0.1.0 sat Nov 26 16:43:37 2011
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > exit
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Pr
  production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  C:\Users\ratan > sqlplus scott/tiger@dst
  
  SQL * more: Production of release 11.2.0.1.0 sat Nov 26 16:43:44 2011
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect
  descriptor of
  
  
  Enter the user name:
  C:\Users\ratan > set oracle_sid = DST
  
  C:\Users\ratan > sqlplus scott/tiger@dst
  
  SQL * more: Production of release 11.2.0.1.0 sat Nov 26 16:50:02 2011
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect
  descriptor of
  
  
  Enter the user name:
  
  Entered TNS are as below
  
  
  tnsnames.ora # Network Configuration file: C:\app\ratan\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  LISTENER_ORCL =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  
  
  DST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = localhost))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = DST)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  
  
  out of lsnrctl is as below
  
  C:\Users\ratan > lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production November 26, 2011 16:51
  : 24
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = ratan-PC)(PORT=1521)))
  TNS-12535: TNS:operation expired
  AMT-12560: TNS:protocol adapter error
  AMT-00505: Operation timed out
  Error Windows 32 bits: 60: unknown error
  
  C:\Users\ratan >
  
  Please let me know if any information is needed to answer my question.

  Ratnesh Sharma wrote:
  I don't think that there is such a limitation. but I don't know if a single listener can work. I installed 2 db to oracle 11g on the operating system of windows vista on my pc at home.

  A single listener, with the default name for LISTENER, using port 1521 single default, is quite capable of - in fact, WAS DESIGNED FOR - several instances of several versions of several ORACLE_HOMEs service. Having several headphones rarely accomplishes nothing except confusion between the diagnostic process, as your case showed clearly.

  A listener is simply a broker for connection requests. Having a listener for each database on a given server is the equivalent of the telephone company, creating and maintaining a separate table for each telephone number in the system

  You must read http://edstevensdba.wordpress.com/2011/03/19/ora-12514/

• How to connect two databases to a single listener

  Hello
  
  How to connect two databases to a listener.is it is possible or not

  Hello

  Yes, you can record a single listener to respond to several databases. There are several ways to do it and the best way that I would suggest for you is the use of "Network Setup Wizard" or "netca", which is a graphical interface that allows you to meet your requirement. Otherwise, you can hardcode in your listener.ora file located in the 'ORACLE_HOME/network/admin/listener.ora '.

  Example is as follows

  Listener.ora

  SCREW =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = lab01) (PORT = 1521))
  )
  )

  SID_LIST_VIS =
  (SID_LIST =
  -1 database configuration
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB1) *.
  *)*
  -Database Setup 2
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB2). *
  *)*
  )

  Then restart your listener.

  Kind regards
  Asif Muhammad

• ORA-16783: could not resolve the deficit for the database

  I have two databases emadb and emadbdg, governed by Data Guard. emadb is currently principal. emadbdg is currently pending physical.
  
  ORA16783 - cannot solve the gap for the database is one I think, is the origin of the problem. Anyone can help solve the problem below. Logs attached.
  
  Output of data protection
  
  DGMGRL > show detailed configuration
  
  Configuration - DRSolution
  
  Protection mode: MaxAvailability
  Databases:
  emadb - primary database
  Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database
  
  emadbdg - (*) Physical standby database
  WARNING: ORA-16817: configuration not synchronized rapid failover
  
  (*) Fast failover target
  
  Properties:
  FastStartFailoverThreshold = "30"
  OperationTimeout = "30"
  FastStartFailoverLagLimit = "30"
  CommunicationTimeout = "180"
  FastStartFailoverAutoReinstate = 'TRUE '.
  FastStartFailoverPmyShutdown = "FALSE".
  BystandersFollowRoleChange = "ALL".
  
  Fast-Start Failover: ENABLED
  
  Threshold: 30 seconds
  Target: emadbdg
  Observer: emarn1
  Offset limit: 30 seconds (do not use)
  Primary closure: FALSE
  Auto-Rétablir: TRUE
  
  The configuration status:
  ERROR
  
  
  DGMGRL > see the detailed database emadb
  
  Database - emadb
  
  Role: PRIMARY
  State of destination: TRANSPORT-WE
  Occurrence (s):
  emadb
  
  Database error (s):
  ORA-16783: could not resolve the deficit for the database emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadb.
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "optional."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadbdg, emadb '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadbdg, / opt/app/oracle/oradata/emadb '"
  FastStartFailoverTarget = "emadbdg".
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadb.
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn1) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadb_DGMGRL) (INSTANCE_NAME = emadb)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadb/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  ERROR
  
  DGMGRL > see the detailed database emadbdg
  
  Database - emadbdg
  
  Role: STANDBY PHYSICS
  State of destination: apply
  Transport delay: (unknown)
  Apply the Lag: (unknown)
  Real-time query: OFF
  Occurrence (s):
  emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadbdg".
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "OPTIONAL."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadb, emadbdg '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadb, / opt/app/oracle/oradata/emadbdg '"
  FastStartFailoverTarget = "emadb.
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadbdg".
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn2) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadbdg_DGMGRL) (INSTANCE_NAME = emadbdg)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadbdg/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  WARNING
  
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL > output

  Alex Antony Samantha wrote:

  
  Head node

  SQL> archive log list
  Database log mode            Archive Mode
  Automatic archival            Enabled
  Archive destination            /opt/app/oracle/oradata/emadb/archivelog1
  Oldest online log sequence     65
  Next log sequence to archive   67
  Current log sequence            67
  
  SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
  
  THREAD# MAX(SEQUENCE#)
  ---------- --------------
        1           925
  

  It is misleading to the column sequence, sequence of real number is 65 series, but it's beyond. Have you restored any old backup with the incarnation?
  When you perform incremental backups, is the current_scn in the two primaries and Eve was balanced?

  And the sequence number * 29 * is transferred from the primary to the standby (or) he has been removed from the primary?
  Perform the two methods.

  (1) SQL > alter system set log_archive_dest_state_2 = 'reporter ';
  (2) conduct 3-4 log switches
  (3) SQL > alter system set log_archive_dest_state_2 = 'enable '.

  and displays the alert log database and backup files.
  And you mentioned the hostname in the entries of the listener, if this entry is added in/etc/hosts? otherwise you can use the IP address instead of the host name and then reload the listener.

  second method
  (1) copy archives missing from primary sequence of 29
  (2) place manually and then perform a recovery
  or
  (3) retrieve manually

  And update with your conclusions after all these lists.
  Thank you.

• Automation of database startup and shutdown of AIX for several databases

  Hi I'm 9i running two databases with oracle different holmes on an AIX server.
  Now to implement the automation of start and stop database, I found the oracle on http://download.oracle.com/docs/html/A96167_01/post-inst.htm#i1035384 documentation.
  
  I'm not sure about step 3
  
  3. Add the dbstart script in the file/etc/inittab:
  
  # mkitab ' oradb:2:wait: / bin/su oradb - c | ' / $ORACLE_HOMES/bin/dbstart.
  
  
  For example my ORACLE_HOME for the 01 database is /ora_01/product/9.2
  and the ORACLE_HOME for the 02 database is /ora_02/product/9.2
  
  I have 2 entries in the initab?
  
  mkitab ' oradb:2:wait: / bin/su oradb-c|/ora_01/product/9.2/bin/dbstart.
  mkitab ' oradb:2:wait: / bin/su oradb-c|/ora_02/product/9.2/bin/dbstart.
  
  
  Thank you

  Hi br00klynZ00

  No doubt dumm, just stupid answers.

  Yes, we should do as root. You are a substitute to oracle ' su - oracle ' so no worries.

  Can we consider this question as answered? ;-)

• TCP.invited_nodes

  I think I already know the answer, but...
  
  At the request of my manager, I started to play with TCP. INVITED_NODES. What we wanted to know, is if we can specify a range of client ip addresses rather than list each one individually. My first tests indicate 'no '. The documentation never expressly addresses the issue, but how things are worded seem to indicate 'no '.
  
  But, because "you never know what you don't know"... I thought I'd ask.
  
  On a closely related element, any special emphasis on the use of the TCP protocol. INVITED_NODES if some of your clients are coming across a VPN?

  You cannot specify a range, generics, partial IP or subnet mask
  You must place all guests of nodes in a single line; even for those excluded from the nodes.
  You must always enter localhost as a guest node.
  TCP. INVITED_NODES takes precedence over the TCP protocol. EXCLUDED_NODES

  $ORACLE_HOME/NETWORK/ADMIN/SQLNET. ORA

  TCP.validnode_checking = YES
  TCP.invited_nodes = {IP list}
  TCP.excluded_nodes = {IP list}

• PAT for two web servers

  Hi all.

  I want to change the MS ISA for Cisco ASA server, but I have problem with PAT.

  The two addresses are published under the same internet address 1.1.1.1 MS ISA server configured static PAT for two web servers, example.web1.com inside the address 192.168.1.10 and example.web2.com inside the address 192.168.1.11.

  When the user try to open the web page example.web1.com the internet ISA Server MS create translates an internal address 192.168.1.10

  When the user try to open the web page example.web2.com the internet ISA Server MS create translates an internal address 192.168.1.11.

  In the cisco example uses single address:

  static (inside, outside) tcp 1.1.1.1 192.168.1.10 www www netmask 255.255.255.25

  but I have two web servers uses the same port 80 and even outside of the address 1.1.1.1

  SAA can create translation URL? For example:

  static (inside, outside) tcp example.web1.com, www www 192.168.1.10 netmask 255.255.255.255

  static (inside, outside) tcp example.web2.com 192.168.1.11 www www netmask 255.255.255.255

  Hello

  To my knowledge, this type of NAT is not possible in the SAA.

  The ASA has nothing to differentiate the 2 translations to eachother other than the order of the NAT configurations. But I think that at the level of your software it doesn't accept even the second NAT configuration that it overlaps with the first. In the most recent software that it would accept the second configuration, but the traffic would still be hit only one of the NAT configurations.

  There must be something on the ISA MS who, in addition to NAT overlapping, knows that static PAT choose based on the requested web page?

  -Jouni

• Can I have load balancing for two ISP (PPPoE and PPPoA) on Cisco 897va connections

  Hello

  I have two ISP connection and I have Cisco router 897va, I want to have the load balancing for two ISP connection second connection is PPPoE connection and second is PPPOA (ATM) connection.

  It is possible to do?

  Thank you in advance.

  You can balance by TCP (the default behavior with CEF enabled) stream.  Alias a user turns off a pipe and the next user goes off the next pipe.

  Make sure that you use the nat with route map that matchers the output interface, then you just need two routes of equal cost default (a leaver each circuit).

• One or two database is necessary, if I have two FxM?

  My current FxM has prob and portal together.

  I intend to have two FxM, which means two probes.

  Should I two portal on each server, or a Portal Server who sit together with a probe?

  If you need a Portal Server, should I two database or a database to store parameters of monitor?

  In a situation where you have more than one collector/probe, it is advisable to have a portal that consolidated reports for Foglight.  The portal also provides a single interface for configuration.  This is particularly important if you have the same application or a site monitored by the collector/probes.

• Copy of the object between two databases

  Hi, in SQLDeveloper I can copy the objects 'tools-> copy of database... "between two databases such as (tables, views, indexes, triggers, constraints, etc, etc...), but how can I do it with SYNONYMS and GRANT of the object? Thanks for your help.

  You can watch the cart (view > trolley).

  The cart can generate a script to include SUBSIDIES, and you must add synonyms. You can then run these scripts in your target database.

  Drag the table to your shopping cart. Add synonyms.

  Export your basket. Select "grants."

  Decide if you want the data or not.