Date of original video file changes when they are imported

Similar Questions

• Photoshop pixel dimension changes when they are imported to illustrator

  Hello

  I'm importing and editing text in a photoshop file in Illustrator.

  Photoshop file:

  -7020px x 9930px

  -59.44 84,07 cm x

  -300 pixels/inch

  

  However when I save for the web, it tells me that the size of the original image is 1686px x 2384 px, but the size of the artboard is always the same as my photoshop.

  

  

  Should I be concerned about the drastic change in pixels?

  Thanks in advance!

  Sandi,

  You can set just the width or the height of the original (7020 or 9930) value in the window the size of the Image, and everything will be fine, as long as you include you the entire image in the save for Web (you should be the artboard to the work, as appropriate).

  Illy has a simple approach to pixels: basically, it leaves just their only, so any way that you change the size of your work, no resampling takes place, and she uses even pixels as a unit identical to the points.

  When you want to work with pixels, it is more prudent to use dots pixels as the unit, to avoid nothingness thresholds / added unwanted caused by rounding/inherent inaccuracies.

• Blury video/time lapse when they are imported

  Hi guys,.

  I could not find this same question so I can't imagine that it is has not been requested before.

  I uploaded one of my own videos / timelapse of youtube and I wanted to use the downloaded in first Pro CC version.
  The downloaded version is 1080 and super strong, whenever I play a preview of this video, it looks very blury as if it was a very bad quality. When I pauzé the video image becomes strong again.

  
  This also happens when I use the video to start a new sequence, to make sure that sequence is adapted to the video settings...
  What is wrong and how can I avoid this?

  Thanks for your help in advance!

  Have you tried to resolve your Full resolution:

  

• Red video and no sound at the end of the clip 3 hours when they are imported into first

  Hi all

  I currently have a problem with first Pro CC when a clip of 3 hours that I recorded (720 p/24 fps) using XSplit loses video and audio in the last 10 minutes when they are imported into first. The rest of the video is perfectly fine, but this section of it does not correctly (it goes forever, one minute or more per image) and will not export the missing without audio recall bias, and the video (export fails at the end). The clip is a created and coded by XSplit MP4 file and is able to normally play outside Premiere.When overview in the first, reading only shows a screen completely red. There is no effects applied to the element, or any change to the it.

  I tried to clear my cache preview and import the clip into a new project with exactly the same results in the same place in the clip.

  Thanks for any help!

  Hi, IPA,.

  You have a video file that has a variable rate, which does not work with Premiere Pro. You can transcode the file, and then it should work OK. Many people use the brake hand or similar.

  Thank you
  Kevin

• Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Hello!!!

  Is it possible to create a folder that can hide files automatically, when they are copied in it? I mean how to program a folder so that everything that he would automatically become hidden? I would be very grateful...

  Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Yes. A sort of roundabout.

  For this example, create a folder on your C drive named HideTest.

  Download http://winsupport.org/utilities/freedos-choice.html Choice.Exe (click on the link to download the utility program near the bottom of the page. "And save it in the C:\HideTest folder).

  Open Notepad and then copy and paste the following text in it:

  Off @Echo

  : All
  Set FilesToHide = No.

  : GoToDir
  C:
  cd\HideTest

  : Top
  CLS
  IF FilesToHide %! Is Yes! Attrib *. * + H

  : Choice
  Choice.Exe /c:YN t:Y, 30 are looking for files to hide
  If ErrorLevel 2 Goto: exit

  : MakeList
  Dir > TempList.Txt

  : CheckFiles
  Set FilesToHide = No.
  Find.Exe "0 file (s)' TempList.Txt
  If ErrorLevel 1 Set FilesToHide = Yes
  If exist TempList.Txt Del TempList.Txt

  : Loop
  Goto: Top

  : Output
  Set FilesToHide =
  If exist TempList.Txt Del TempList.Txt
  Output

  Click on file, then save under...

  Go to C:\HideTest

  Name the file Hide.Bat

  Click Save

  Close Notepad

  Open Windows Explorer

  Go to C:\Documents and Settings\UserName\Start where user_name is your own username.

  In the right pane, right click, select New, and then click shortcut.

  Click Browse, and then navigate to C:\HideTest and click on Hide.Bat, click Next.

  Type a new name or accept the default name and click Finish.

  Right-click on the newly created shortcut, and click Properties.

  Change the race: from the normal window to reduced.

  Click on apply, and then click Ok.

  Restart your computer.

  Note: In the line above Choice.Exe c:YN t:Y, 30 are looking for files to hide, 30 is the number of seconds it will wait before checking the new files. This can be from 1 to 99.

  Edit: Just to satisfy my curiosity, why do you do this?

• Windows7-how can I get my photos to allow me to move the individual to the neighbourhoods, in a file, picture when they are in a thumbnail view? __

  Windows7-how can I get my photos to allow me to move the individual to the neighbourhoods, in a file, picture when they are in a thumbnail view?
  XP has allowed this and then handed over to the correct order seen again in list format

  Thank you for visiting the Microsoft answers community.

  You can organize is more manually the files in the folders - Windows 7 change is design, but if you think this is something that you want changed, please submit your suggestion on the Microsoft Connect site for your comments.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help! Photoshop edited jpg color false when they are imported into Muse

  Okay, so I try to build a Web page of photography (among others) and I change most of my photos in photoshop. All the photos I edit in photoshop and save it in jpg format, look great when printed, uploaded on facebook etc, but when I import them into Adobe Muse for and put them on my page Web, the colors of the photos becomes desatures or distort slightly (so that they appear dull). When I edit images in lightroom and save them in jpg format and import them into Muse, they look fine, but colours edited in photoshop seem to spoil my pictures when they are imported into Muse.

  What I am doing wrong?

  Susan

  You are using some weird color management settings and do not convert to sRGB probably... Check your settings in PS itself and save for Web dialogue box and experiment around.

  Mylenium

• How to stop the movieclip created in flash when they are imported to seduce?

  I created a movieclip and drag it onto the main timeline(flash cs4), the movieclip have 60 fps and I put stop(); the last image. When they are imported from the swf to Captivate, the movieclip loop play. I tried the rdcmndPause = 1; but don't know where to put it. I don't really know the idea how to proceed. (already search in the forum and read adobe help, but no step by step how to do this).

  Hello

  Maybe try to animate your Flash in the main Flash timeline. I don't know if it is possible to promote a MovieClip to the main timeline, but usually people want the animation to loop and it doesn't and it is because they have not animate in a MovieClip. They did it in the main Flash timeline.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Why video AVCHD still presents itself as "File of Format not supported" when they are imported into CS5?

  I've been editing AVCHD with CS5 for several months, but every time I import video AVCHD first always displays a message box titled "File import Failure", all lists of imported files, and then at the bottom of the window, it says ' Error Message: file format not supported ".  You click on the 'OK' button and change with the film without problem.

  I was wondering why this message still comes up if the film is supported in CS5.

  Just MTS files are probably very well; First is quite smart to seize what he needs in the other files, as long as the file structure is intact. An even easier way would be to use the media browser; Navigate to the folder containing the AVCHD folder structure, and the MB will flip mode display of AVCHD. It will give you a list of all the files contained in the folder of DATA flow, without having to actually dive into the file STREAM. Select some or all of the files and import them into your project.

  The message "File Format not supported" is due to all of the files you listed; some of them are used by first behind the scenes, but they are not the media themselves, so that they can not and do not need to import.

• Audio disappears from the video file when they are imported, please help!

  Hello

  When I open a new project and create a sequence, usually I import a. File video TS that automatically gets a blue label. When I hang out in the sequence, the video will appear in a video slot machine and associated audio appears in an audio connector. However, lately, about completely random, when video files I import them, they come with a purple autiomatically label assigned to them, and when I drag them on the sequence, there are only videos or sound only. PPCS6, when I go into the properties of the video in the software, records that the. TS file has any audio associated - yet when I look at the file outside of the software, it is very good and has the audio.

  Can someone help me please? It's quite urgent and I would appreciate it.

  Thank you.

  Update: just installed the update, did not know it was there! It seems to have corrected, thanks for letting me know! I hope that it doesn't yet, but I'll be sure to come back if she does.

• Video files (any type) when they are imported, will import the video and audio.

  Premiere Pro (Mac) CC

  3.4 Ghz i7 Quad Core

  750 G SSD

  2 GB NVidia graphics card

  32 MB of Ram

  Any file video, regardless of the codec, import into Premiere pro as an audio file.  I did the things suggested in other forums, such as replacement .mov file extension, I used intermediate codecs, prores422, codec .mov (HDV1080p30) among many others.

  Also, I can't import a video sequence that seems to have an alpha that are associated with channel.  The graphics with alpha channel were made by Adobe AE and work well in Final Cut Pro 10.1

  I need help, FCPX 10.1 is a nightmare and I have a weekly television show that needs to be done as soon as POSSIBLE.  Until now, the switch to first Pro CC disappeared not smoothly.  Any help would be appreciated.

  Thank you for your response.  I could get my hands on Technical Support and we determined that my first Pro CC installation was corrupted.  It's a simple solution to uninstall and reinstall the program.  Now, everything works fine.  To answer your question, when I imported any type of video file (I tried several types of different different video files and codecs) it would be important in audio.  The icon is Audio only, when I put the sequence on the Timeline, I couldn't put anything on the timeline of the video, only Audio was present.

• audio out of sync when they are imported into the first, very much in the original

  I worked with the same configuration for about six months now, but I'll have a new problem - the noise is at the mouth of singers on my original videos (.mov format) but when I import into first to try to change them, it no longer matches. I don't know what to do - should I move the corresponding audio track, or is there another question?  I have not met this before; It's a show, and I thought it was originally an audio delay to be in different places in the public, but it's the same with the two videos.

  Thank you!

  I would use the original film.

  Assuming you're on CC2104 drag an item in the timeline to make a corresponding sequence.

  When all changes are make export to mpeg2-dvd to dvd and H.264 for Youtube.

• Windows Media Player only recognizes the song titles when they are imported from itunes, imported in the form of wav files.

  Hi, I imported/ripped music in form of wav files using WMP first and imported into itunes so that I can sync w / my ipod but itunes recognized only the first words of the music info (generally the number of song, title, ect). ITunes would allow me to change the info. So I decided to import my 7 000 more songs again using itunes, in the hope of finding the songs via watched folders to WMP. Well, that was the case, but he only identified the song number and the title. Now, I have a long list of other/unknown.

  I can get information in WMP via "Find album information", one song at a time, but that would take forever. I imported 318 songs to date. I use wav files to maintain the quality of the sound.  Can someone tell me an easier way?

  Hi MarkyB13,

  You might have items in your library in Windows Media Player that have missing or incorrect media information.

  You can check out the following link and check if it helps:

  Add or edit media information

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Damaged files when they are imported into Aperture. An Adobe tool or function appears 'corrupt '!

  Hello

  I use to work with sweet Apple Aperture for my library photos. As know, or maybe Apple stopped support and update of the opening. Bad news.

  So, I decided to try Lightroom.

  A tool or function in Lightroom is dedicated to import masters from may Aperture library.

  BUT it does not work very well!

  Some masters of 2348 (JPEG files) are classified in a folder named "Notimported". And best, they are damaged! But the real opening files are OK, for on:

  I thought that master real Aperture were really damaged, but an analysis tool they are really OK?

  What can I do? That helps Adobe can give me to get in the Lightroom "Master Library" (in terms of files) these 2348 files?

  And I'm starting to believe that this specific feature Adobe Lightroom or the tool is "corrupted". And I need to work with these files, 2348. Not bad!

  So Adobe please help me!

  Best regards

  Pascal

  BAD NEWS: The files are also lost in the opening. No backup.

  Can I have the name of the files I tried what you suggested.

  2348 Lost.

  Not much to do except revorery data with a specialist. The tool I used to check they were Ok seems unreliable. Or I do not know how to use it.

  Thus,.

  It's nighttime in Paris.

  Best regards

  Pascal

• Videos curtailed when they are imported

  I was importing images taken on a handycam (Panasonic HDC-HS20) that has been saved on the hard drive of my Mac, and once it is imported they are cut short. As far as I know, they are a Quicktime movie file type (although I'm no expert). They are relatively short excerpts (most of them only 6-30 seconds in duration) and the amount of missing time of each clip can vary. I am able to display them in their full length in iPhoto and Quicktime. I tried to import from within first Pro CC and by dragging and dropping them in Premiere Pro, the two senses seem to also cut short video. In addition, missing images are taken at random points, leaving the audio out of sync.

  Any help is appreciated!

  How did you get the images in your Mac?

  Open one of the files on your hard drive and open it in Quicktime. Once the file is open, go to the window menu > show Inspector. An inspector pane opens, either report what the inspector said, or take a screenshot and post that here, as in the following example:

  

  In addition, if you can see the full clip in iPhoto, select the item in iPhoto and export it. Try the ingestion of that clip in the first. Do you see now all content?

  MtD