Error Ox61011beb on HP Officejet 6500 e-709n code

Similar Questions

• OfficeJet 6500 stopped 709n of print, print e-mail messages but does not print silkscreen.

  I deleted and reinstalled the driver software, I run WIN7, but drive is not compatible. I have reset my wireless connection and all the test gives a good result. When I try printing an element, as a recipe that has a print button, printing is no beep, no impression is given. I have this printer for some time and it was working fine until, mysteriously, it stopped and gave to this problem. Nothing will in the queue, at the same time things went in the queue but never printed. Help, please!

  Hi CaptainSteve,

  I'm sorry to hear that you have problems with your Officejet 6500 E709n.

  I have included a link to the driver Windows 7 given that you indicated that your CD is not the driver for Windows 7. HP has a wizard called printer install wizard for Windows 7 and Windows 8.  It will search for the best driver for your printer and your computer, and you went through to install the appropriate driver.

  I have also included a document on what measures to take when print jobs are stuck in the queue in case of problems. HP also has a utility shooting known as the printing and scanning doctor.  It is a diagnostic tool and solves many problems of printing, scanning and connectivity.

  Driver and HP Officejet Full Feature software

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

  You have problems to find your Windows 7 or Windows 8 print driver? Try the HP printer installation wizard

  http://support.HP.com/us-en/document/c02691615

  Unable to print? Print jobs are stuck in the print queue

  http://support.HP.com/us-en/document/c02205477

  Try printing HP and Scan Doctor for Windows

  http://support.HP.com/us-en/document/c03275041

• OfficeJet 6500 wireless 709n

  I use Linux OS cinnamon Mint as my main OS. I have a scanning program called Xsane witch only recognizes USB or wired connections. My question is can I have my Officejet 6500 connected with usb and continue to use wireless?

  Hello rickm1945,

  Yes you can.  The only thing that turns off the wireless could be plug an Ethernet cord or manully turn off.

• Ink system failure Officejet 6500 (no error code specified)

  Ink system failure Officejet 6500 (no error code specified)

  I have turned off the machine on again (and it doesn't)

  I turned off the computer and unplug the unit (and it does not fix it)

  Without specific error code I'm not sure what to do

  Hi CHCA. Your Officejet 6500 must be out of warranty? You can doublecheck the warranty status of your printer here: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie & lc = on -if it is still under warranty, you should not pay for a new printheaad.

  But if your printer is no longer under warranty, you buy one a. The part that you really need to order an Officejet 6500, is CN643A. If you are in the United States, here are the HP part store page where you can order the new print head Assembly: http://h20141.www2.hp.com/HPPARTS/Search_Results.aspx?mscssid=C580393F30964EDD82B16A5C641BEC41 & Searchin' PartNumber = & SearchPN = CN643A

  If you are not in the United States, start from this page: http://welcome.hp.com/country/us/en/wwhowtobuy.html , specify your country and search for CN643A.

  Also, here is a support document that should help you with the replacement of the print head: http://support.hp.com/us-en/document/c01643079

  I work with HP but my messages and responses are mine.

• analyze error 1706 with Officejet 6500 E709n - menu

  Dell Inspiron 530, Windows XP SP3.  OfficeJet 6500 E709n.  I just reinstalled the drivers due to a hard drive problem.  When I select scan document from the Solution Center, I get the message: "Please wait while Windows configures scan. The feature you are trying to use is on a CD-ROM or another removable disk that is not available. "I installed the software from a download from the HP site, not a disc.  I leave this message and I get: "error 1706.  valid any source not found for the Scan product.  Windows install cannot continue. "If I have to cancel several times out of these error messages, the menu scan document comes finally to the top, and the scan function to work properly.

  Any suggestions?

  Steve

  Hello Steveb72

  Files in 7z folder mentioned, is what was extracted from the installer that you downloaded. You are able to indicate the installation prompt to the temporary folder?

  I suggest to do the following:

  Follow the steps below to clean the software, and then reinstall the printer. These instructions may be similar to what you have already done but are more complete and includes the following steps to remove all temporary files to make sure that nothing interferes with the installation.
  1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
  2 download the full feature software and drivers

  OfficeJet 6500 E709n Full Feature software (XP)

  3. double-click on the downloaded file to extract the files
  4. once the software install window press Cancel or Exit to close the Setup program
  5. type % temp % in the field run or search programs and files.
  6 find the starting with 7z folder (example: 7zS2356)
  7. right click on 7z file and choose copy
  8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
  9 open the 7z folder
  10 open the Util folder
  11 open the CCC folder
  12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
  13. when the software has been removed, restart your computer
  14. run the Accessories\ System Tools Disk Cleanup
  15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
  I would like to know if you still have the same issues?

• HP Officejet 6500 E709n: HP Officejet 6500 E709n - ink system failure error message.

  I have a printer HP Officejet 6500 E709n.  I get the following error message when I turn on the printer:

  'Ink system failure.  "Please turn printer off, then on.

  I then do as instructed and turn the printer off, but then the whenever I re - turn on the printer, I get the same error again.  The printer is now fixed to the top and none of the buttons on the printer works except the Power button on / off.

  Any suggestions on how to proceed?

  Hi @recooke,

  Welcome to the Forums of HP Support! I see that you can not use your HP Officejet 6500 Wireless. You get a printer fault to "turn printer off and then on again" you did without success.

  Please perform a hard reset:

  1. disconnect all cables and cards of memory in the printer.  Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.
      
  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup).
      
  5. connect the power cord to the back of the printer.
      
  6. the printer should automatically power back upward.  If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is an all-in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  It is recommended that the printer is plugged directly into a wall socket to ensure a uniform level of power.  Sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  Any change?

  If you still see the error, please check your Inbox. I sent you a private message on the Forums.

  Response with the result. I hope this helps.

  Just say thank you, please click the ' Thumbs Up ' button.

• OfficeJet 6500 709n: officejet 6500 709n does not the wireless

  officejet 6500... finished 709n Setup... found and entered the network password... printer shows successful login... computer even wireless network... displays (6500) printer queue of the printer but don't print that physically connected via USB Port... when it is not plugged, in the HP utility message "unable to communicate with the device selected. He may have been arrested or otherwise cut "below,... " nor is the case... HP support is completely useless... Please help... thank you... GEO

  I'm on a laptop from MacAir running OS 10.10 Yosemite

  

  A forum support person was able to direct me to a solution...

  It happened as follows:

  I entered IP address * printer 6500 in the browser bar...

  Opens the Web page of the printer and established a wireless connection...

  Then I DELETED the printer and drivers the MacAir fax

  cue the printer and re-installed the print driver for the 6500 709n

  in the list of available drivers MacAir...

  After that, the wireless connection that could not be made

  used to set up and I was printing without the

  Connecting the USB cable ever since...

  Thanks Forum!

  * IP address of the printer was on the configuration page I

  has been able to print when connected cable OSB... If not, a

  MAC address must be in the back of the printer on a sticker...

  some of these instructions were not specifically made clear in

  General installation information and troubleshooting

  Notice... to me... good luck!

• OfficeJet 6500 E709n: Error Code 4, [(3,14,0)}]

  I recently updated my Dell computer, but I'm still using Windows 7.  When I try to scan using my OfficeJet 6500 I get an error message immediately: "problem of access to files and resources on the computer.  Try the following steps.  After each step, try to scan the image: - restart the computer - reinstall the HP Photosmart software supplied with the camera, error code 4, [(3,14,0)}.] »

  I followed these steps several times but also reinstalled the whole full functionality of the software and the driver OJ6500vE709_Full_14.    I also installed Photosmart Essential 3.5, although I do not think that he should never before scanning.

  I uninstalled all associated HP OfficeJet 6500 products and reinstalled everything.

  When I used HP Print and Scan doctor to help out, everything seems to work properly.  I was finally able to scan a document ('test analysis') while the 11 steps of printing HP and doctor Scan.  Hiowever, as soon as I tried to use the HP Solution Center application to scan a document, the same error messages came.

  I am confused at this point, given that the doctor of the scanner helped me successfully to a test analysis using the normal HP Solution Center to do the same thing is not.

  Thanks for any help!

  I just re-read one of the earlier posts about a similar problem and noted the suggestion of the Expert HP to run CCleaner in the framework to get the software cleaned.  I just (belatedly) followed that advice and voila!  Everything works fine!

  Thanks for the earlier solution that helped me solve my problem.

• All-in-one HP Officejet 6500 has: paper size or the type of error message problem

  I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
  I get a paper mismatch (type and paper size is incorrect) error message.
  The printer is not connected to the internet, but it is connected by a USB cable to the computer.
  I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
  This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
  Thanks for your help.

  17/03/2015 #2

  I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

  Thanks for your help,

  LK

• HP Officejet 6500 709n document scan problem

  My Officejet 6500 709n will only scan images. He says that I have to reinstall the HP Photosmart software, but I can't locate.  Does anyone know where to find it in the HP Web site

  Hi genny4664,

  Click on the link below and select your operating system to download the drivers and full software features.

  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&lang=en&LC=en&Product=3795406&Task= &

• HP Officejet 6500 e709a: Error Message When you install all in one product

  I'll have to re - install my HP Officejet 6500 e709a software.  I get the following error message when I try to install it.  Someone at - it suggestions on how I can fix this?

  Thank you

  JN

  

  Hi @MattNC79,

  Welcome to the Forums of HP Support! I understand you are trying to reinstall the software and drivers for your HP Officejet 6500 to the computer running Windows 8.1 operating system. When you try to install, you get an error message with an error code. I would like you to click on the link below to begin:

  HP printers - fatal error ' error 1603. A fatal error occurred during installation "(MSI error 1603) displays in HP Software Installation in Windows

  Please let me know the results, I'll watch for your reply.

  Thank you

• HP Officejet 6500 more: Office jet 6500 more error Code 0 < 61011bec

  Switch on my HP Officejet 6500 more displays error code 0<61011bec.   does="" anyone="" know="" what="" this="" code="" means="" and="" what="" fix="" there="" is="" for="" it="">

  Hi RnRMusicMan

  Thanks for your help and the URL of the video.  The part ony of the video, which I have not tried is remove the duplexer and see if there's anything wrong with that part of the printer.

  Looking a little further.

  Bravo and thank you for your suggestions.

• HP Officejet 6500 a Plus - E710n: error message [OFBBD0]

  In my view, that the OS is Windows x 64. My situation is that I can no longer print from my iPad or phone. I can still print without any problem in my laptop. When I try to my tablet or phone I get the message that it is in contact with the printer (which is normal), then an error message is displayed. Error [OFBBD0]

  Hey @FerFer,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you are unable to print from your iOS devices using your HP Officejet 6500 a Plus e-All-in-One - E710n. I want to help you with this.

  What you describe, it seems that you use AirPrint when the error message appears.  With this printer, you have three ways to print from iPhone / iPad. The most common method is called AirPrint. For your information, "AirPrint is a solution of mobile printing included with Apple's iOS v4.2 and later mobile operating systems.

  iPad, iPhone and iPod touch users can print wirelessly on any HP ePrint-enabled printer which is connected to the same local wireless network. Most of the released HP printers in 2010 and later support AirPrint.

• Recently bought an iPad 2 and I would use my officejet 6500 709n but don't know how?

  Recently bought an iPad 2 and I would use my officejet 6500 709n but don't know how?

  got the HP iprint app but don't have a lot of features except for photography pictures.

  Y at - it info to expand the services?

  Your printer does not support the built-in iPad AirPrint.  You can print with third as HP iPrint printing applications, but you can print is somewhat limited.

• Install the driver for the E704a Officejet 6500 error message

  I get the message: ENUM registry key HKEY_LOCAL_MACHINE\System\Current Control Set\Enum

  Manufacturing: Microsoft

  I have no idea what that means or how to cope. I just want to have a printer on my computer!

  Any help out there?

  Hello Clickmaster,

  Welcome to the Forums of HP Support! I see that you are running an error while trying to install your HP OfficeJet 6500. After some research on the page of Support technique Microsoft , I found this possible solution, that worked for others as well. When you get the error I would you hold down CTRL SHIFT and click Cancel, the installation should continue.

  Please let me know if this succeeded, if you get the error, we will have to look at other solutions. I'll watch for your reply.

  Thank you