DBLINK 11g to 8i

Similar Questions

• Problems connecting to the database msaccess 32 bit on 64 bit 11G

  Here's the question:

  I have a database to 9i (32-bit windows) with a connection hsodbc to an old one to an Access database so once the schema can see and copy data from an access database has said, everything works fine.

  I'm about to move the 64 bit 11.2.0.3 on windows 2008 server 64-bit database, database is migrated and tested ok.

  The problem comes from the connection dg4odbc, I created the AS400 database connections and they are ok, but I set up an ODBC for the access database, using the 32-bit ODBC interface as MS recommends, but I always get this error message:

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  ORA-02063: preceding 2 lines of RADERDB

  According to MS technet, it is do not use the c:\Windows\SysWOW64\odbcad32.exe to set up the ODBC connection, but I used only executable, when I use the ordinary 64-bit ODBC admin I can't even see msaccess drivers first.

  The funny thing is, when I point the tnsnames.ora on the old server 9i entry, it uses the ODBC connection and then the dblink 11G and then works fine. However, it is a band-aid solution and I want to get everything works from the new production database server.

  Any suggestions?

  Thanks in advance...

  The message means you are using a 32-bit with a 64-bit program ODBC driver. It does not work. If you want to connect with the 64-bit DG4ODBC, you must use a 64-bit ODBC driver. A package is available on the Microsoft Technet site (AccessDatabaseEngine_x64 - http://www.microsoft.com/en-gb/download/details.aspx?id=13255 ) that ships the drivers ODBC 64-bit for their Excel/Access programs.

  Please note that product installation gateway 32-bit on Windows 64-bit is NOT supported.

  -Klaus

• dblink is available on 11g xe?

  Hello

  dblink is available on 11g xe?

  If no restrictions are such me please.

  Yours sincerely

  Yes, it is available.

  For XE limitations, visit this link

  http://www.orafaq.com/wiki/Oracle_XE#limitations

  For XE comparison with others, chek this link
  http://www.Oracle.com/us/products/database/Enterprise-Edition/comparisons/index.html

• Migrating oracle 9i to oracle 11g but now dblink is no work

  First of all, sorry for my English.
  Achieved an export from the old to the new db_links and now do not work.
  
  Oracle 9i - work
  
  13:52:45 card > @banco
  Mostra user, instance, e start time host - pressure enter para continue
  E the USER 'SYSTEM '.
  
  INSTANCE_NAME HOST_NAME STATUS STARTUP_TIME
  ---------------- ---------------------------------------------------------------- ------------ --------------
  atlas1 card OPEN 01/23/12 17:53
  
  Decorrido: 00:00:00.03
  
  BANNER
  ----------------------------------------------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
  PL/SQL Release 9.2.0.8.0 - Production
  CORE Production 9.2.0.8.0
  AMT for Linux: Version 9.2.0.8.0 - Production
  NLSRTL Version 9.2.0.8.0 - Production
  
  Decorrido: 00:00:00.03
  13:52:46 card >
  
  13:52:59 card > @dblink
  Informed o valor para db_link: scapr
  
  OWNER, DB_LINK CREATED USERNAME HOST
  -------------------- ------------------------------ -------------------- ------------------------------ --------------
  SCAPROD.PANVEL.COM.BR PUBLIC LINK SCA 17/11/11 14:35
  
  Decorrido: 00:00:00.03
  13:53:03 card > desc dual@scaprod
  Nome
  -------------------------------------------------------------------------------------------------------------------------
  MODEL
  
  13:53:07 card > desc [email protected]
  Nome
  -------------------------------------------------------------------------------------------------------------------------
  MODEL
  
  13:53:16 card >
  
  13:53:16 card > show the global setting
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- -------------
  global_context_pool_size string
  global_names boolean FALSE
  13:53:40 card >
  
  
  
  Oracle 11g - does not, a little work with the full name of the db_link:
  
  13:53:57 nouveaute11 > @banco
  Mostra user, instance, e start time host - pressure enter para continue
  E the USER 'SYSTEM '.
  
  INSTANCE_NAME HOST_NAME STATUS STARTUP_TIME
  ---------------- ---------------------------------------------------------------- ------------ -----
  aquarius card OPEN 01/26/12-13:42
  
  Decorrido: 00:00:00.01
  
  BANNER
  ----------------------------------------------------------------------------------------------------
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  CORE Production 11.2.0.3.0
  AMT for Linux: Version 11.2.0.3.0 - Production
  NLSRTL Version 11.2.0.3.0 - Production
  
  Decorrido: 00:00:00.04
  13:53:58 nouveaute11 >
  
  13:54:12 nouveaute11 > @dblink
  Informed o valor para db_link: scapr
  
  OWNER, DB_LINK CREATED USERNAME HOST
  -------------------- ------------------------------ -------------------- ---------------------------
  SCAPROD.PANVEL.COM.BR PUBLIC LINK SCA 26/01/12 13:02
  
  Decorrido: 00:00:00.03
  13:54:16 nouveaute11 > desc [email protected]
  Nome
  ---------------------------------------------------------------------------------------------------
  MODEL
  
  13:54:23 nouveaute11 > desc dual@scaprod
  ERROR:
  ORA-02019: description of conexao para o banco dados não localizada remote
  
  
  13:54:26 nouveaute11 >
  
  13:54:41 nouveaute11 > display the global setting
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------
  global_context_pool_size string
  global_names boolean FALSE
  global_txn_processes integer 1
  13:54:45 nouveaute11 >
  
  
  Any help? :)
  Thank you!

  vitorjr81 wrote:
  As you can see the db_link is functional, but just with the name and surname:

  13:54:16 nouveaute11 > desc [email protected]
  Name MODEL

  13:54:23 nouveaute11 > dual@scaprod desc
  ERROR:
  ORA-02019: description of conexao para o banco dados não localizada remote

  13:54:26 nouveaute11 >

  13:54:41 nouveaute11 > display the global setting

  VALUE OF TYPE NAME
  -chain global_context_pool_size
  global_names boolean FALSE
  global_txn_processes integer 1

  Do as below and post the results here

  SQL> select global_name from global_name;
  
  GLOBAL_NAME
  --------------------------------------------------------------------------------
  V112
  
  SQL> 
  

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• Create DBlink.

  Hi all

  My version of DB: 11g R1

  Why the dblink is not created using the command below

  
  

  SQL > create database public link testdb.xyz.local using 'TEST '.

  ERROR on line 1:

  ORA-00933: SQL not correctly completed command.

  She was successful, if I jump the domain name in the command,

  Example: create the database public link test_db using 'TEST'

  What is the difference? Why the dblink is not created when using the domain name.

  Kindly help.

  Kind regards

  Krish.

  A period is a special character in an identifier as an all lowercase letters of the space.

  You must put the name of the link between double quotes.

  Sybrand Bakker

  Senior Oracle DBA

• Link between Oracle database 10g and Oracle database 11g database

  We have a database from Oracle 10 g to which connect us with SID = mod

  The TNS names file is present in the directory Oracle NETWORK\ADMIN on the development computer contains the following two entries among others

  MOD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.70.10.23)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.70.10.21)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = mod)

  )

  )

  NEWMOD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.70.10.7)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.70.10.9)(PORT = 1521))

  (LOAD_BALANCE = yes)

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MOD)

  )

  )

  In the SQL client we can log on to the mod and newmod each with its own username and password.

  To create a link of database as follows

  CREATE newmod CONNECT TO DATABASE LINK Public user1 IDENTIFIED BY password1 USING 'newmod ';

  the database link is created without problems.

  However, in trying to retrieve data from tables in the database that uses 10.70.10.7 and 10.70.10.9 using a command like

  Select Column1 table1@newmod;

  We get the following error:

  ORA-12154: TNS: could not resolve the connect identifier specified

  How can access us the tables at the entrance to tns newmod because it resides on a server 11g, while tns mod entry is on a 10g Server? (both use the same service name, but are located on different ip addresses)

  Your help is very appreciated.

  Have you set TNS_ADMIN variable? Check if you have any additional TNSNAMES file. ORA in your ORACLE_HOME files.

  Point A of TN-entry NEWMOD to a host. Load Balancing is not needed.

  Try to create the dblink with the connect descriptor.

  create database DB_TEST link to connect to SCOTT

  identified by "password" ' (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.70.10.9)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = MOD)))';

  Kind regards

  Suntrupth

• Import of data from 11g to 10g pump

  I have 2 database: first is 11.2.0.2.0 and second 10.2.0.1.0
  In 10g I created the link of database 11g
  
  CREATE THE DATABASE LINK "TEST. LINK ".
  CONNECT to 'monservice' IDENTIFIED BY 'monservice '.
  Using "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = host) (PORT = port))) (CONNECT_DATA = (SID = sid)))';"
  
  And run this query to dbLink test that work well:
  
  Select * from [email protected];
  
  After him, I try to call the open function:
  
  declare
  number h;
  Start
  h: = dbms_datapump.open ('IMPORT', 'TABLE', ' TEST.) LINK', null, ' 10.2 ");
  end;
  
  and get exception: 39001. 00000 - "invalid argument value.
  If I remove ' TEST. LINK "argument, it works fine
  
  Published by: 990594 on 26.02.2013 23:41

  Hello
  Think maybe it's a bug - there are a number of issues related to this kind of thing and I think you should be on 10.2.0.3 at least to do this.

  Sorry - iniitially I thought that you were shooting 10 g (and not the reverse).

  Kind regards
  Harry

• Extraction of data through an existing dblink

  Hello
  
  
  I am trying to find a way to recover data using a dblink with ODI 11.1.1.5.
  
  I found this article, but I think it's a little dirty: http://www.business-intelligence-quotient.com/?p=1187. In addition, in the version 11g, the name of the table is enclosed in double quotes and I can't seem to get rid of them. (If you know how it, it would be useful... ;).)
  
  
  
  I think I should write a LKM that creates a view of the staging. To use it, I should have a way to set the name of DBlink whenever it is used in an interface. How do I set? A variable? And how to access with something like this:
  Create the view... ( .... )
  as some... from < % = odiRef.getSrcTablesList ("", "[SCHEMA].) [RES_NAME] (",","" ") % > @DBLINK_NAME < % = odiRef.getSrcTablesList (" ","[POP_TAB_ALIAS]",","," ") % >
  
  
  
  Thanks in advance for you help.
  
  
  Concerning

  Hello

  I used very effectively LKM Oracle of Uli to Oracle DBLInk with the view of the target. Chances are, you will have more joy with the creation of objects in your target (DWH) as the source system.
  Take a look at the following:

  http://www.business-intelligence-quotient.com/?tag=LKM

  I did create an option in the LKM to pass the name of DBlink and make reference to the value of the option in the LKM.

  I don't see the problem with the creation of the view on the target, more so we couldn't go create views the source in my case so this suited us perfectly.
  You need become friendly with your DBA, most of them listening - you have a valid reason to edit the tnsnames.ora so suggest you get that done - your not go anywhere with DBLINKS without some changes.
  Hope this helps,
  Alastair

• Problem with APEX 4.1, DBLink and NLS_LANG

  Hello
  
  I get an error message:
  
  "ORA-12705: unknown or invalid NLS parameter value specified.
  
  When access to the content stored in another database of APEX via a DBLink
  
  I use Application Express 4.1 on the Oracle 11 g XE database
  
  I have an application that uses the dblink to access data on an Oracle 9i server.
  
  NLS_LANG in database 11g: SPANISH_SPAIN. AL32UTF8
  NLS_LANG in the 9i database: SPANISH_SPAIN. WE8ISO8859P1
  
  I changed the NLS_LANG 11 g to SPANISH_SPAIN value. WE8ISO8859P1 but nothing happens.
  
  What can I do?
  
  Thank you!

  Hello

  Oracle 9i supports all Format of Date masks supported a 10g database. If you use a database connection, the database tries to set the same NLS settings on the remote database as defined in the current database session.

  When you get the error? Do you get in report designer or in your own application? If it's in your own application, check the masks of date format of "globalization application-level attributes."

  You must also ensure you actually close the database link in the ' Code from PL/SQL to cleaning "security-Session of database to avoid problems of links of open database in your database session pool. Because otherwise, database sessions that do not need the link database are also affected by this problem, as the generator,...

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Dblink 11 = &gt; 9 - possible?

  Hello
  
  
  I have a 11.2.0.1.0 database where I need to create a link to 9.2.0.5.0 database.
  
  Is this possible, if so someone can tell me if there is no special syntax, I need to be aware of when I try the SQL code crashes for centuries - without error - but on selection tests * of dual@my_new_link crashes just the link...
  
  
  Thank you
  
  Robert.

  Hello

  Yes, you can create dblinks from 9i to 11g and vice versa...

  It might the problem with response time of connection string, if you know what tns shot it uses so that you can check or extract the DDL and

  Publish

  tnsping

  You can check the compatibility * Client / Server / Support of interoperability between different Versions of Oracle [207303.1 ID] *.

  Thank you

• Upgrade WINDOWS 10 on Toshiba Portege M800 - 11G

  Hello
  My question is very simple: can someone tell me if the upgrade to WINDOWS 10 is possible for my serial number - 11G, laptopnTOSHIBA M800 29037079W
  Best reahrds
  Andriusca

  Generally, the models with no UEFI Boot Mode will have problems to Win10.
  It is best to stay with the currently installed operating system.

• NB100 - 11G - HARD drive not detected during installation of Windows XP

  I have a Toshiba NB100 - 11G with Win XP Home and a 160 GB HD RAM upgraded 1 024 to 2 GB. Recently, I tried to install Win Pro SP3. However, it did not work and the message was that the hard drive was not recognized. I have no problem restoring with the provided Toshiba Recovery CD (which has Win XP Home).

  Does anyone have an idea why I couldn't install Win XP Pro? Could it be related to my RAM upgrade? (The only thing I changed.)

  Thanks for a response. Sincerely, Allan.

  Hello

  The problem is that you integrate the driver SATA Windows XP can detect the internal HARD drive. Otherwise, you get a blue screen or the HARD drive is not detected.

  With the help of nLite (freeware tool), you can create a new drive to install XP with SATA driver package. This is described here:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  If you have any other questions, you can also see similar forum topics. You can find hundreds of threads here in the forum about it.

• Satellie Pro L830 - 11G - access to the recovery partition

  Hello
  I have a Toshiba Satellie Pro L830 - 11G, running Windows 7

  I would like to restore it to the original settings.
  I tried various things, but so far no luck.

  When I look into the system, I see that the system recovery disk is always classified as "Healthy (active recovery partition)", but there ' hatching / diagonal lines "current running through it (if necessary) - when I right click on this drive, it offers me only the opton of"aid ". It gives so many 1.46 GB AND free space as 1.46 GB

  So, I don't know if that means he's here and I can access it somehow, or if it is just an empty disk but with no real possibility to recover original parameters.

  Hello

  This 1, 4 GB partition is created by Windows and has nothing to do with the created by Toshiba recovery partition where is backup recovery image. Toshiba recovery image has certainly more than 6 GB I think.

  On Win7 machines you can start the image recovery installation using F8 at startup. When you do this, you will have the menu boot advanced options and select the option to fix my computer. Detailed information on the recovery image installation you will find in the user manuals document s or on follow Toshiba document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Please note: disk image installation HARD recovery works if your phone has only factory.
  If you have changed something that he probably does not work. Under change something, I mean own installation operating system or changes in structure of HARD disk partitions.

• Satellite Pro S300 - 11G: headphones Pluging will not completely cutting speakers

  With high volume settings and with the headphones plugged-in, a very distorted sound leaking through the speakers.
  Have tried using several different headphones.

  The machine is that the satellite Pro S300 - 11G retrograde to XP and less than a month.
  Toshiba service are threatening to charge if the problem turns out to be the software, not hardware. (even if they provided the software!).

  Popular ideas

  You have the volume of the Microphone high value?

  Maybe he just returned from Mic. Try to cut the Microphone, or turn down the volume to about 10%.