dbms_random string with restrictions

Similar Questions

• How to convert the string with numbers in the table of Boolean 2D

  Hello

  I have input a string with comma separated numbers 1,192 (starting at 1).

  This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

  The 2D table consists of 4 times of 0.47 Boolean values.

  1.48--> [0.47] numbers [0]
  49.96--> [0.47] numbers [1]
  Numbers 97.144--> [0.47] [2]
  145.192--> [0.47] numbers [3]

  If a '1, 49, 97 145' input string put all [0] [0.3] true.

  How can it be easy/fast resolved?

  Thanks for help

  Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

  In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

  Repeat this step for each number in your table.

  (What is a class assignment?)

• How to convert the string with numbers in U8 with ascii

  Hello

  I have a string with only numbers 0. 9 paper.

  Now, I want to convert to table-U8.

  He works here, but now the problem: How can I change each character to its ascii value?

  Example:

  entry: 123 (string)

  output: x 31, x 32, x 33 (U8-array)

  Thanks for the help

  It's very easy

  String to Byte Array Function
  Have the Palette: string/array/path Conversion functions

  Converts a string to an array of unsigned bytes. Each byte in the array has the ASCII value of the character corresponding to the string.

• Number of strings with decimal

  Hello community,

  I would like to convert numbers to the string with decimal separators. So if the number is 52351 then the string I need is 52 351

  Another example 18653284.9653235 becomes 18,653,284.9653235

  What would be the best way to do it?

  Thank you!

  Read this thread: https://forums.ni.com/t5/LabVIEW/comma-separator-for-large-numbers-how-to/m-p/2123090/highlight/true...

  Not the first person to wish for this idea.

• How to concatenate the string with a digital command?

  Hello

  How to concatenate the string with a digital command?

  Thank you.

  

  I think I forgot to add the semicolon, what you can do is, drag the CONCATENATE function and add semicolon.

• How the filter string with don't cares...?

  Hello

  I need help on getting filter string with cares. Attached is a VI for ref.

  If anyone has chain, analysis of expertise; I need your help.

  Thank you

  SB_LV

  Another fun one

• Initialization of a string with a UTF-8 character

  It doesn't seem like it should be that hard, but I am trying to initialize a string with a UTF-8 character (specifically a degree after a few numbers symbol).

  I tried:

  Dim myString As String = new String ("\uc2b0", "UTF - 8");

  as well as a few permutations but did not have luck...

  Java strings are in Unicode, UTF - 8 is a way to represent these characters in a stream of bytes.

  Take a look at the following code, it might be useful: I suggest to put point break in the line add and take a look at the content of the two strings.

  No compiled code, could not work, I hope you get the idea...

  Char [] testchars = new char [] {'\u00B0', '\u0020'};
  String displayString = "undefined";
  Byte [] testBytes = new byte [] {(byte) (byte), 0xC2 0xB0, 0x20};
  String displayString2 = "no set2";
  try {}
  displayString = new String (testchars);
  displayString2 = new String(testBytes,"UTF-8");
  } catch (Exception e) {}
  }
  BasicEditField bef = new BasicEditField ("Test2:", displayString + ":" + displayString2);
  This.Add (BEF);

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• How to capture the data of type string with agent script and then compared to an alarm

  Hello...

  How to capture the string with agent of script data and then create a rule to compare the string data to generate alarm?

  Thank you!...

  Start here:

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/w/Admins-wiki/6155.custom-script-agent-1-leverage-an-existing-monitoring-script-to-push-data-into-Foglight

• Can Adobe Muse cause editors of numerator of a website with restricted access levels?

  Can Muse of ADobe cause several editors of a website with restricted access levels?

  Hi Cindyw73540197,

  Unfortunately the Muse do not support collaborative environment at this point of time.

  I advise you to post this as an idea on the page of the idea of the Muse. More voice to an idea increases its chances to be included in future versions. Ideas for features in Adobe Muse

  Note: If your site is hosted on BusinessCatalyst then you can create users with different access to change online.

  Kind regards

  Vivek

• Search strings / with some applied condition

  Hello comrades,.

  I am writing an extendscript which is supposed to loop through all of the PGF and find all the strings / with a certain condition applied (say, comment).

  The problem is that in the script guide, I couldn't find a function that retrieves the status of character property. I tried to use the function "charAt() (i)" js, but it doesn't seem to work in ARE. No idea how to implement such a function?

  Here's the 1st draft of the script.

  var doc is app. ActiveDoc;

  If doc. {ObjectValid()}

  checkCondFMt (doc);

  }

  else {}

  Alert ("no open section");

  }

  function checkCondFMt (doc) {}

  FMP var is doc. MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  var CondObj is doc. GetNamedObject ("Comment");

  While (FMP. {ObjectValid()})

  var textItems is bmp. GetText(Constants.FTI_String |) Constants.FTI_LineEnd);

  var b = new TextRange();

  TR. Beg.obj = tr.end.obj = textItems;

  TR. Beg.offset = 0;

  for (var i = 0; i < tr.len; i ++) {}

  var c = tr.charAt (i);

  var PgfProps is doc. GetTextVal c [i], Constants.FO_CondFmt;

  Alert (PgfProps.Name);

  }

  PGF = bmp. NextPgfInFlow;

  }

  }

  Thanks in advance for your comments!

  OK, I see the problem now. JavaScript doesn't have a "block scope" for its variables. She carried the function, so your 'i' variable is used in more than a loop. You must use a different variable for the inner loop:

  for (var j = 0; j < oCond.length; j += 1) {
      if (oCond[j].Name == CondObj.Name) {
          applyCharFmt(textRange, doc);
      }
  }
  

  In the code example above, I use 'j' for a counter for the inner loop.

  In general, you can avoid problems of this kind to declare all your variables at the top of the function:

  function functionName (param1, param2) {
  
      var i, j, textlist; // etc.
  
      // function code...
  }
  

  That makes it easier to 'follow' variables and make sure that you do not use one more than once.

  -Rick

• Add pages with restriction

  I want to calculate and add up the hours in the weekly planning table, but only those that contain a specific word.

  1 cell (class from 10:00 - 11:15) + 2. cell (11:15-12:00 break) + 3. cell (12:00-13:00 meeting) + 4. cell (13:00-13:45 run)

  for example:

  Jeff comes only for the class and meeting. So I want to add only class & session, including 2 h 15 min.

  But Nathan only comes to break, meeting & run. 2 h 30 min. my problem, that's every day is different, so I can't select specific cells, so it can calculate only what I need. I want to select each column in a week, so the program can search for specific words and only those which adds up.

  My question is there is a way I can do this? like functions, sumif and sumifs maybe... I couldn't understand it yet. He said only: I don't understand 10:00 - 13:00... I thought that maybe I could join each cell a 'hidden' length of time calculation, I can't say the program is this term with this word and to only add those... something like that...

  Thank you in advance!

  Algernom

  Hi Algernom,

  " It just says: I don't understand 10:00 - 13:00....

  A table of Pages reads "Word from 10:00 - 13:00 ' as a text string, not as 'a pair of time, separated by a hyphen and followed by a word' and might not know what to do with this string as part of a mathematical formula

  There should not be very difficult to achieve the desired result, but the method will depend on the way in which the data is organized. Here's one possibility:

  

  Data are a calendar indicating the days and activities. The names of the people who attend are entered in the cells of the body.

  Research is a lookup table listing the activities and their departure times. As each activity starts at the time of the end of the previous activity, end time can be picked up in the cell below the start time, ad only the time of the end of the last activity should be included as a separate entrance...

  The duration of each activity is calculated in column C using this formula:

  Lookup::C2: B3−B2

  Fill to the list of the last entry line. If it is filled in the last row of the table, the formula returns an error of invalid reference.

  The result column using COUNTIF to count the number of times where a name is registered to an activity, then multiply this figure by the duration of the activity. There are four sections to this formula, one for each activity, separated by signs more. (Spaces entered after each + 'stack' sections below.) The sum of the four results is returned to the cell of hours of this line.

  Result::B2:

  = COUNTIF(Data::$2:$2,"=*"&A2&"*") × LOOKUP(Data::$A$2,Lookup::A,Lookup::C) + COUNTIF (data: $3: $3, "= *" & A2 & "*") × LOOKUP(Data::$A$2,Lookup::A,Lookup::C) + COUNTIF (data: $4: $4, "= *" & A2 & "*") × LOOKUP(Data::$A$2,Lookup::A,Lookup::C) + COUNTIF (data: $5: $5, "= *" & A2 & "*") × LOOKUP(Data::$A$2,Lookup::A) Lookup::C)

  Fill up to the last row of the result table.

  This may require revision if your table (s) is (are) prepared differently.

  Kind regards

  Barry

• String with \t\n output

  Hello

  I'm trying to add my string of the report output, and the output of the channel is something like this..."...\t\n, akfjdakjf\n, jaiejfiaje\n." When the string is displayed in the report, it displays everything in one line (made in one long line). I would like the report to show as below...

  ajkfj

  ajfkd jkjfka

  fjka

  Very grateful for the help. Thank you ~.

  Could you please show us how you write the text in the report?

  Please note that if it is a string variable that you pass on, "\n" is a string static and not evaluated with respect to escape characters. So if you want to have a new line, the variable itself must include the new line, is not the "\n'-"command"for a new line...

  Tip: If you need a new manual line, you can insert one pressing Ctrl + Enter...

  hope this helps,

  Norbert

• LabVIEW 8.5 problems using strings with MATLAB Script node

  I am having some problems that seem to be a bug that I can not understand how to solve using strings in the MATLAB script node.

  I have two subVIs that make some calculations and both include a variable called "errortext" is a string. The two subVIs do their calculations using the MATLAB script node, so all the outputs are defined in the script node.

  The first sub - VI outputs that string and a number. The string is sent to an indicator on the front panel. The number is sent to the second Subvi which performs some calculations more and then returns another string of the same name to an indicator on the front panel. This second string is different from the first (error different two messages should appear).

  I did have problems with this in the past until this morning. This morning, it seems that two of these channels are now somehow mystically connected to each other. The second string repeat that what the first channel said despite the fact that the first string is not be linked to the Subvi where lives the second string. The only link between the two is a calculated value of double which went from #1 to the Subvi #2 Subvi.

  I tried many things: I tried to rename the strings so that they do not have the same name. Initially, he would not let me and gave me an error saying that the renowned string was a undefined variable (which is ridiculous). After removing and replacing things, I finally managed to do so I would change the name, but now it displays nothing at all and even more I think it might still display a completely different another string in my code!

  I also tried to remove the channel indicator and replace it. Yet once, it wouldn't let me initially. I would like to highlight, press DELETE and nothing. Finally after replacing all the subVIs with them, I was able to remove the flags, but this did not help the problem.

  Any idea for these problems pecular is greatly appreciated!

  I totally understand what you did, you were talking about variables in your fist post, and it was not clear if you were referring to a variable you have defined in the Matlab code, or you try to call a variable indicator/control, where is often seen on this forum (and who isn't). That said, the crux of The Matlab Script communicates with Matlab via ActiveX, and when you use a command window opens small. This is the workspace of Matlab environment. A variable that you define in a Matlab Script node will be visible in the other, even if it's in another VI (see attached for an example, figure). This is because the script nodes are running in the same environment space. It seems to me that if this is what is happening.

• How do to convert the string (with the Hex data) in number?

  Hello

  I use TestStand 3.5 to automate a few test cases associated with boot loader.

  The requirement is that I need to read the value in some places for specific address. The values of these addresses are stored in a hexadecimal format.

  We have a step customized in TestStand through which we can read these values by address, but she returns as the type "String".

  For example, the value to 0 x 0000008 is 000001 B 2, and he returned in Locals.Value_Read as "000001 B 2" in the string.

  Is it possible, I can convert the string "000001 B 2" to a number?

  I tried to use the function-> val (locals. Value_Read), but it is return 0 as TestStand figures that the input string is not representing the valid number.

  Please help me with this.

  Thank you and best regards,

  Niraj.

  Try: Val ("0 x" + Locals.Value_Read)