DDR3 memory (HP Proliant DL380 G7) Configuration

Similar Questions

• ProLiant DL380 G6 memory configurations

  Our servers ESX host of base HP Proliant DL380 G5s in recent years (2-Quad Core procs with 32 GB of memory).

  We intend to jump to the G6s DL380 (2 Quad Cores and 64 GB of memory) and I always rolled my head around configurations of memory. Looks like I could go with 8-8 GB or 16-4 GB Dual RDIMMS. For our company, I don't see us willing to go more than 64 GB for a host for the free slots aren't a concern.

  The choice seems obvious because of differences in cost between the two. I guess this leaves of performance.

  1. What is the difference real performance one would expect between these two configurations?

  2. This change when we jump from ESX 3.5 to VSphere?

  3. Are there other aspects that I'm on.

  With the virtualization environment, more memory of course provide best performance and host virtual machines more than you have known, the only thing that would be if you must attach these 2 types of hosts G5 & G6 in a cluster, you will be not able to VMotion and you should activate CVS to work otherwise use CPU masking in the parameters of the advance on CPUID NX indicator that could do otherwise use VMware CPU Compatility tool to check that well.

  Many of my clients are satisfied with DL360 G6s and also running 64 GB of RAM but it using DIMMs 8x8GB.  I would use whatever it is cheaper for your cost as long as it has the same requirements of 64 GB of memory.  Unless you have plans for the future expansion of 128 GB, then using 16 x 4 DIMMS would be a long-term strategy.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Expansion / Upgrade ProLiant DL380 G5 and ProLiant DL360 G5

  Hi all, we have two servers, Proliant DL380 G5 with SmartArray 400 and Proliant DL360 G5 with SmartArray 200icontroller controller, expand us on the disks, memory and cards network, the problem is that after we see the documentation which is sometimes wrong and don't know not the limitations of each of the parties, the issues are:

  Proliant DL380 G5 SmartArray 400:
  - STORAGE: up to 8 SAS / SATA, not clear what size that can be used with this controller, we understand that up to 500 GB SATA 7200 RPM and maximum 2 TB SAS 7200 RPM, we currently use with 146 GB drives to 10,000 rpm, whose original documentation is the maximum allowed value.
  -MEMORY: Up to 64 GB modules of maximum memory up to 8 GB.
  - NETWORK: update with PCI Express, support cards that I can find are HP NC110T PCI Express and PCI-Express HP NC373 HP NC360T PCI-Express.

  Proliant DL360 G5 SmartArray 200i:

  - STORAGE: up to 4 SAS / SATA controller supports only 200i SmartArray four drives in RAID 0, 1, 1 + 0 if we wanted to expand to six bays that are available on the disk server, it would change the controller and memory. Yet, the size of disk maximum supported based on the documentation is 72 GB SAS and SATA drive 60 GB, but looking it seems as if you agree at least 300 Gb SAS disks at 10 000 rpm and up to 500 GB 7200 RPM.
  - MEMORY: up to 64 GB maximum memory modules up to 8 GB.
  - NETWORK: update with PCI Express, support cards that I can find are HP NC110T PCI Express and PCI-Express HP NC373 HP NC360T PCI-Express.

  This is what I have gathered and what interests me in the expansion and to say that the documentation I found to give the feeling of this conflict, is perhaps by the dates of their procedures, but before you make a payment would guarantee the purchase. Also getting information guides, manuals and forums, I have also consulted compatibiliy HP Proliant Server Guide, so I have consutlado with HP before purchasing, but have yet to receive an answer.

  A greeting and thank you very much

  Hello jranerosc. I think you'd have better luck trying Business Forums of HP. You should get more specific help.

  Have a great day!

• Smart Array P440ar: ProLiant DL380 g9 & controller Smart Array boot order

  Work on a server of gen9 ProLiant DL380 (SFF) with an of P440ar (version 3.00) at location 0 (embedded RAID) and a controller (version 2.52) P840 to location 1. I have the P440ar connected to the risers on the front of the system, and I'm starting off the P840 6.5 RHEL. If no hard drive is attached to the P440ar, it works, but if all the disks are connected to the P440ar, the boot device is not found. I tried to change the order of boot in RSBU controller, but the P440ar was the ONLY listed controller. I didn't even have an option to change the P840.

  Am I allowed to configure the system in this way?

  After fighting with it for several days, I deleted the system P840 and started with just the P440ar. Then I added the P840 in the system and restarting, the system automatically added the P840 to startup controller command list. Works fine now.

• AMD Radeon HD 8570 (2 GB dedicated DDR3 memory) dual monitor does not

  After the 8.1 window, I tried to install 2 monitors.  Only works.

  I have a HP Pavillion 100 with AMD Radeon HD 8570 (2 GB dedicated DDR3 memory).

  The HDMI or DVI connection works separately but not together.

  I tried both monitors before the 8.1 update, so I don't know if it of a problem 8.1 or not. Any help would be appreciated.

  Hello Asten,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I read your post about how it is a problem using two monitors on your computer, and I would be happy to guide you to a resolution! To start, I have to ask you a few questions:

  • What is product and model number from your desktop?
  • Are all of your updates HP completed the Wizard help HP for your graphics card?
  • What game you play it is you give this problem?
  • Has your computer finished all his important updates from Windows?
  • What is a current or recent problem?
  • Have you tried using different DVI and HDMI cables?
  • You upgrade your operating system Windows 7 or Windows 8?

  In the meantime, I recommend that you follow this document to using twoor more monitors with a computer (Windows 8). This helps ensure the monitors are connected and correctly configured for your computer.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• HP Proliant DL380 G4 Red Hat 5.1 Linux P2V

  Hello

  I'm trying to P2V a HP Proliant DL380 G4 with Linux Red Hat 5.1.

  I did a basic cold migration and found that I was getting panic the kernel. Looking through the mistakes, that's because migration cold does not provide the correct drivers etc. to the controller raid etc..

  What I want to know is:

  What is support/how to P2V a Linux OS with RAID etc configurations?

  Is there documentation?

  Personally Im lazy and I'd like to see for a moment, and then click software if possible.

  I P2Ved a bunch of them - but to be honest, we had problems in the start menu and ended up using Platespin Migrate (PowerConvert)

  We talked to one of our COMPUTER resellers and they gave you a free for a migration or two - licesnse if at least we were able to test the product.

• What the BIOS settings need to be enabled for Proliant DL380 Server?

  We will install ESXi 4.0 on a HP Compaq Proliant DL380 server.

  We would like to know what are the options in BIOS would allow (as: support for Intel VT)?

  Thank you

  Post edited by: TonyJK

  I does not change much options BIOS on my equipment except to allow the No. run memory and enable CPU virtualization technology.    Here's a thread that asked the same question, http://communities.vmware.com/thread/125837?start=0&tstart=0

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• can I mix ddr3 memory with memory ddr3 1600 1067 in my model mac end

  Hello, I have an iMac (27 inch, end 2013) which has a 8 GB 1600 MHz DDR3 memory
  I also have an old mac 24 inch late 2009 that uses 4GB 1067 MHz DDR3 memory my scan of question I put older memory in 2 empty slots of my most recent iMac? Thank you for you're time any help is greatly appreciated.

  No, you can't.

• El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  Yes.

  El Capitan system requirements

  https://support.Apple.com/kb/SP728?locale=en_US

  Check the compatibility of the application

  http://roaringapps.com/apps

  How to upgrade?

  http://www.Apple.com/OSX/how-to-upgrade/

  Note:

  Computer backup before the upgrade.

  El Capitan works better with 8 GB of RAM installed.

• Re: My Satellite L500-19Z does support DDR3 memory?

  My Satellite L500-19Z does support DDR3 memory?

  In my view, it has 4 GB (2x2gb 200 pin 1.8 v DDR2 SoDimm PC2-6400) memory standard (800 MHz I think). I want to move to 8 GB and I saw the following offer: -.

  8 GB (2x4gb) 1333 Mhz PC3-10600 memory Kit.

  My laptop will support it?

  I hope someone can help.

  Concerning

  > My Satellite L500-19Z does support DDR3 memory?
  Say the user manual?
  Did you check that?

  The support of memory depends on the chipset.
  If the chipset does not support DDR3 so you cannot use it.
  The chipset is Mobile Intel GM45 Express Chipset and AFAIK that support DDR2 800 MHz 8 GB max memory chipset.

• DDR3 memory upgrade

  Where can I find the bars of DDR3 memory for desktop HP Pavilion P7 - 1126 s? The manual says I need PC3-10600 (1333 mhz) - SDRAM DDR3 unbuffered, non-ECC memory - DIMM of 64-bit, 1.5V, 240 pins - DDR3-DIMM, SO-DIMM, 16 GB max using 4 GB modules. Unable to locate any suppliers or stores that carry this type of memory ram and cannot find anything online. Any help would be appreciated. Thank you.

  Have you seen this statement or here (he supports 12800)

• DDR3 memory (s) chip

  I am awaiting delivery of a new office of h8 - 11520t want the chip generation with third i 7. It comes with a chip memory 8 gb DDR3 1600 MHz.

  I have read that the DDR3 memory is two memory channels and only works using both channels if the chips of memory are installed in pairs. This single chip in my new computer will be slower due to having only a single chip; should I order a second chip?

  Thanks for any advice.

  Hello

  You will certainly have a performance advantage if use you 2 x 8 GB Modules and I recommend certainly - your PC will have a maximum of 32 GB Ram (IE 4 x 8 GB Modules).  16 GB is a good compromise, since it offers a nice amount of memory running in dual channel, while the 2 empty slots for better cooling.

  Best regards

  DP - K

• EliteBook 820 g1: DDR3 memory Type unsupported

  The system has detected that a type of unsupported DDR3 memory is installed. Will you please turn off the system and remove memory DDR3 not taken in charge to avoid the instability of the system and the potential loss of dato

  Incompatible memory (2E3)

  POWER BUTTON - power off

  ENTER - continue starting

  For more information, please visit: www.hp.com/go/techcenter/startup

  Hello:

  Have you tried to install a new module of memory?

  If so, you probably have a memory DDR3 1.5 volts.

  You must ensure that the memory you put in this machine is DDR3L (1.35 volts).

• How can you tell that your T400 has installed a DDR3 memory card?

  Hello world

  I got my T400 off ebay last week, and I do not know if my T400 has installed because I had this T400 (2767bk1) DDR3 memory for $800 and it seems new, but in an open package. I'm here to ask for your help, maybe there is a software that can perform a test to determine the type of installed memory card. Please let me know if there is a solution, thank you.

  skareb

  Welcome to the forum!

  the T400 can accept as DDR3 modules.   no other module does physically fit in the slot.

• OptiPlex 960 - can he use DDR3 memory?

  I recently bought a lease Optiplex Dell 960MT.  It came with 2 GB memory DDR2, I need to increase.  I can get 8 GB of DDR3 for the same price as the 4 GB of DDR2 memory DDR2 prices are much higher than for DDR3 RAM.  According to the service manual Dell Optiplex 96, in 960 Opti chipset is 'Chipset Intel Q45 Express w/ICH10DO' http://www.dell.com/downloads/global/products/optix/en/desktop-optiplex-960-technical-guidebook-en.pdf . According to the specifications of Intel for the 960 Opti chipset, it can use DDR3 memory http://ark.intel.com/products/36527/82Q45-Graphics-and-Memory-Controller-Hub.  So, I found a few retailers who sell a refurbed Opti 960 which, claim, have the DDR3 memory in them http://www.amazon.com/Dell-Professional-Professionally-Refurbished-Refurbisher/dp/B0057GPUXE.  So is the Optiplex 960 able to use DDR3 and, if it is, what specs?

  OracleOfDelphi

  N °

  Fails in a DDR2 DDR3 slot.

  If the two are the exact same length and the number of pins, they have a different architecture.

  Also the "notch" on the cylinder is in a different location, so you can't physically put DDR2 ram in one slot of DDR3, or vice versa.

  Bev.