Expansion / Upgrade ProLiant DL380 G5 and ProLiant DL360 G5

Hi all, we have two servers, Proliant DL380 G5 with SmartArray 400 and Proliant DL360 G5 with SmartArray 200icontroller controller, expand us on the disks, memory and cards network, the problem is that after we see the documentation which is sometimes wrong and don't know not the limitations of each of the parties, the issues are:

Proliant DL380 G5 SmartArray 400:
- STORAGE: up to 8 SAS / SATA, not clear what size that can be used with this controller, we understand that up to 500 GB SATA 7200 RPM and maximum 2 TB SAS 7200 RPM, we currently use with 146 GB drives to 10,000 rpm, whose original documentation is the maximum allowed value.
-MEMORY: Up to 64 GB modules of maximum memory up to 8 GB.
- NETWORK: update with PCI Express, support cards that I can find are HP NC110T PCI Express and PCI-Express HP NC373 HP NC360T PCI-Express.

Proliant DL360 G5 SmartArray 200i:

- STORAGE: up to 4 SAS / SATA controller supports only 200i SmartArray four drives in RAID 0, 1, 1 + 0 if we wanted to expand to six bays that are available on the disk server, it would change the controller and memory. Yet, the size of disk maximum supported based on the documentation is 72 GB SAS and SATA drive 60 GB, but looking it seems as if you agree at least 300 Gb SAS disks at 10 000 rpm and up to 500 GB 7200 RPM.
- MEMORY: up to 64 GB maximum memory modules up to 8 GB.
- NETWORK: update with PCI Express, support cards that I can find are HP NC110T PCI Express and PCI-Express HP NC373 HP NC360T PCI-Express.

This is what I have gathered and what interests me in the expansion and to say that the documentation I found to give the feeling of this conflict, is perhaps by the dates of their procedures, but before you make a payment would guarantee the purchase. Also getting information guides, manuals and forums, I have also consulted compatibiliy HP Proliant Server Guide, so I have consutlado with HP before purchasing, but have yet to receive an answer.

A greeting and thank you very much

Hello jranerosc. I think you'd have better luck trying Business Forums of HP. You should get more specific help.

Have a great day!

Tags: Notebooks

Similar Questions

HP Proliant DL360 G6 ESXi5.0 support?

Hello world
I have HP Proliant DL360 G6 does ESXi5.0.Our Support plan is to add 2 HP Proliant DL360 G6 in the cluster having
already 2 host with HP Proliant DL380 G7 model. Any problem by adding in theCluster, VMotion, HA and DRS.
Details of the server in the Cluster currently: -.
2 Server HP Proliant DL380 G7
CPU Cores 8 GHz CPUsx2.665
Processor type:-Intel Xeon E5640 CPU @2. 67 GHz
2Server need to added in the cluster;
HP Proliant DL360 G6
CPU Cores 8 x 2.4 GHz processors
Processor Intel (r) Xeon (R) CPU [email protected] GHZ type
Any help on this will be appreciated.

It should work perfectly with the cluster level setting the appropriate CVS (see http://kb.vmware.com/kb/1003212)

André

Installation of VMware ESX/ESXI 4.1 on HP Proliant DL360 G4

Hello
I think to buy an old HP Proliant DL360 G4 machine with 2 Xeon 3.6 GHz processors and 4 GB of RAM. I intend to install VMware ESX or ESXI 4.1 on it.
I read some reviews of VMware and other products of the hypervisor and all say that these 64-bit Xeons have no VT support option and therefore cannot run 64-bit Windows guest OS.
Since I just use it as test environment learn more about Windows Server 2008. I would like to know if I can install ESX 4.1 on the HP DL360 G4 and if so, can I install client Server 2008 32-bit Windows OS on top?
Another machine, that I'm looking is the Dell Poweredge 2850, which has the same processor and roughly the same features as the DL360 G4. So I want to know what a Xeon with no VT - x 64-bit is limitation of technology with regard to the installation of the virtual machines based on Windows on it.
Thanks for any help.

The Xeon 3.6 have VT - X, so you will not be able to run 64-bit OS comments, as you found it- http://ark.intel.com/Product.aspx?id=28019. You would be OK for customers 32 bits, but you would be prevented from running Windows 2008 R2, because it is 64-bit only. At this point, I wouldn't bother with a test server that cannot run 64-bit guests. If you want to stick with a server-class machine I keep watch or watch a white box - vm - Help.com - see the list of the white box.

Dave
VMware communities user moderator

ESXi Essentials free training / eBook offer

Now available - VMware ESXi: planning, implementation, and security

Also available - vSphere Quick Start Guide

ESX 4.1 on HP Proliant DL360 G7 + Smartarray 410i

Hello
I try to install ESXi 4.1 (downloaded from the HP site) on HP Proliant DL360 G7, but Setup ESXi having problems with detection of RAID. The logical unit of the smartarray is detected, but the size of the capacity is 0 (displays 0.00 B in the screen of the Installer). Is this a known problem, how can I fix?
P. S.
I also tried to install the version no HP of ESXi, same problem.
Everything also tried installing CenOS, fine
Thank you

ESX (i) is limited to 2 TB - 512 bytes / LUN. The ACU can take the table and divide it into logical LUNS that ESX (i) can then use to create data warehouses.

HP ProLiant DL360 G5 - should "fully buffered" memory modules ECC?

Hello
I hope I'm asking in the right forum, and I hope that my question isn't distracting.
We have 2 servers ESX 3.5 clocked at 2 servers "HP ProLiant DL360 G5" with 4 GB of RAM each.
We bought 4 GB of RAM to each server.
I understand that we need ECC DDR2-667 RAM, but I don't know if "fully buffered" modules more expensive are necessary.
Someone please have a Board how do I know? Esxcfg-info shows:
+ Host:
\==+Hardware info:
.........
|----Product Name............................................. ProLiant DL360 G5
........
\==+Memory info:
|----Page Size............................................. 4096 pages
|----Total Pages........................................... 978518 pages
|----Free Pages............................................ 457894 pages
|----Shared Pages.......................................... 417076 pages
|----Common Pages.......................................... 198808 pages
|----Heap Size............................................. 7680 pages
|----Heap Free............................................. 2217 pages
| - Map Free... pages of 1996
| - Size of the kernel Code... 1536 pages
|----System Mem............................................ 45120 pages
|----Num Nodes............................................. 1 knots
|----Physical Mem.......................................... 4293222400 bytes
|----Vmkernel Mem.......................................... 4008009728 bytes
| - Vmkernel free Mem... 1875533824 bytes
| - Service Console Mem... 272 MB
| - Service Console (Cfg) Mem... 272 MB
\==+Aux source memory Stats:
| - The physical memory is... 4192600 kilobytes
| - Service Console memory... 278528 kilobytes
| - Kernel memory... 3914072 kilobytes
| - Waived by VMkernel... 4 kilobytes
| - Mmap thing... kilobytes 26624
|----Mmap Buddy......................................... 4840 kilobytes
| - Core region Code... 6144 kilobytes
| - Benefits of core at the beginning... 3096 KB
| - Data of kernel and lot... 30720 kilobytes
|----Other Kernel....................................... 109056 kilobytes
|----Nonkernel.......................................... 1902012 kilobytes
|----Free............................................... 1831576 kilobytes
And unfortunately, there is no "lshw".
Thank you
Alex

Hello

HP have a few useful pages for their servers, I keep these around as reference, they are called Quickspecs... lists lots of interesting information about the server and its components..., it's the quickspec for the DL360 G5 it seems only the fully buffered collection list... so you may be stuck with requiring that...

__________________________________________________________________________________________

See my blog at http://www.ridethevirt.blogspot.com

ProLiant DL360 G8: Missing Base system device driver

Hello

I have a HP Proliant DL360 G8 with Windows Server 2008 R2 Enterprise SP1 server, but when I go to Device Manager I get lack of base system device driver. Please I need know what driver to install.

Properties of the device:

Hardware LDS:

PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C & REV_04

PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C

PCI\VEN_8086 & DEV_0E26 & CC_088000

PCI\VEN_8086 & DEV_0E26 & CC_0880

Location information:

PCI bus 0, device 4, function 4

Compatible IDs:

PCI\VEN_8086 & DEV_0E24 & REV_04

PCI VEN_8086 & DEV_0E24

PCI VEN_8086 & CC_088000

PCI VEN_8086 & CC_0880

PCI\VEN_8086

PCI\CC_088000

PCI\CC_0880

Best regards

Hi Rubendiazmarino,

Try these drivers for your server:
After installation reboot, your server for these driver to work.

Yours faithfully,

Ryan

DL380 G4 and 64-bit clients

Hi all
I have converted just invited Ubuntu 8.04 LTS 64 bits on a hosted on one server ESX3.5 DL380 G4.
The conversion went well, but when I tried to start it up, I got this error.
```
{color:#000080}"This kernel requires an x86-64 CPU, but only detected an i1586 CPU.

Unable to boot - please use a kernel appropriate for your CPU."+


I presumed it was due to the fact that support for Ubuntu 8.04 LTS 64bit  was for added in "Update 4", and we were still running "Update 1".

{color}
```
So I went and updated the "Update 4" ESX Server, and now when I try to start the virtual machine, I get this error.
Host CPU is not compatible with the requirements of the virtual machine to CPUID...
It would seem that it wasn't the version of ESX being the culprit of the CPU error update.
After doing some research, I met this page, claiming the Proliant DL380 G4 will run a 64 bit OS, but does not have a 64-bit host in VMware.
http://blog.netnerds.NET/2009/01/HP-DL380-G4-and-VMware-will-not-run-64-bit-virtualized-guests/
```
Can anyone confirm whether this page is right, and the Proliant DL380 G4 won't run a 64bit guest OS.  

I don't want to base everything on one page found on the net by someone I've not heard of. and would be happier with a little confirmation from the good people on here. 
```
Cheers Carl

Series HP G4 servers will not support 64-bit vm, this rev server doesn't have a VT...

You will need at least a G5 to the 64-bit guest OS support...

I just upgraded to Safari 10 and now can not watch videos on youtube

I just upgraded to Safari 10 and now can not watch videos on youtube

If the videos require Flash, you can copy the Chrome URL and watch videos. Chrome has a built in flash player.

I've been upgraded to El Capitan and electricity went off and stopped the session. I don't have time to continue for 12 hours. It is the CV. How can I cancel until I have more time?

I've been upgraded to El Capitan and electricity went off and stopped the session. I don't have time to continue for 12 hours. It is the CV. How can I cancel until I have more time?

Hello nancy milano,.

Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

Update of OS X El Capitan

See you soon!

Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks

Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks. IMac originally purchased in 2010. DVD 5.9.5

I'm having no problem with my DVD.

Could you give more details about those who are out of work?

Upgrade to El Capitan and Win10

Hello

I have an iMac that has Yosemite and Windows 7. I use Parallels desktop 9. (But the windows partition is loaded through bootcamp)

I get the message that windows free 10 ends soon.

So I think upgrade to El Capitan and Windows 10.

So I had to buy Parallels 11 to use the two new operating systems. (because 9 does not work with either)

Here are the steps I take to do all three upgrades? I want to assure you that I am not missing something (steps):

1. put on level 9 to 11 parallels

2. upgrade to El Capitan

3. connect via bootcamp and upgrade to Windows 7 to 10

4. restart Windows mac and link 10 partition in parallels.

Upgrades of the OS are big and not easily reversed, so I don't want to make a mistake.

Any help is greatly appreciated!

Thank you

Avoid errors or problems with the updates of the first execution of a bootable backup of what you have that works. I suggest the following:

Restart the computer after the ring, press in and hold the Command and R keys until appears the Menu Utility.

1. Select utility disk in the main menu and then press the continue button.

2. Select the destination volume in the list on the left.

3. click on the tab restore in the main window of disk utility.

4. Select the destination volume in the left list and then drag it to the Destination field.

5. Select the volume of the source of the list on the left and drag it to the Source input field.

6. check understood you, and then click Restore.

Destination designates the external backup drive. Source means that the boot disk internal.

Regarding the Parallels just upgrade the software and verify that your Windows system still works. You cannot proceed with the upgrade of OS X. Look this first: basic steps for the OS X upgrade.

You can update Windows from Parallels. It is useless to try to boot from the installation of Boot Camp. In addition, you must first remove some components of Parallels on your Windows system to start independently.

I just upgraded to Firefox 8 and now I can't connect to webpages about via Mozilla. I can always connect through Internet Explorer.

I've upgraded to Firefox 8 and I can't establish an internet connection to any webpage via Firefox. I removed the Firefox program and re-installed through Internet Explorer with the same results.

One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

See:
- https://support.Mozilla.com/kb/server+not+found
- https://support.Mozilla.com/kb/firewalls

Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

I cannot access all features and can be closed only by using force quit.

Please stop calendar and also the application of reminders, runs. Force quit if necessary.

Back up all data.

If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

Launch schedule and see if there is an improvement.

I upgraded 10.11.4 and all applications that I try to raise the alert that they damaged what happens?

I upgraded 10.11.4 and after restart of applications I try to raise the alert they are damaged. That is what it is?

Safe Mode boot removes the system caches that can help after an OS X day or level.

Upper left corner of your screen, click on the Apple  > Shut Down.

After your Mac stops, wait 10 seconds, then press the power button.

As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

Release the SHIFT key when you see the gray Apple logo and progress indicator.

Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

Then try to launch an application.

On Safe Mode

Upgraded to windows 7 and also a new hard drive

I have a 2005 HP m7060n Media Center http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00306958 & lang = to & cc = us & taskI... running on XP
I was looking to upgrade to Windows 7 and also install a new drive. New readers are shipped with windows 7 already preinstalled and when I change the disks, it will start windows 7.
How could I then exchange the old files to the new drive?
What is your solution the best and less expensive? How do you do this? Help, please.
Thank you
Marco

I suggest that perform you a clone of the hard drive. Seagate drives and WD offer a free version of the wizard disk.

Clone the original 200 GB drive to the new drive. To avoid problems, has chosen a 1.5 or 1 t T drive. Once you have the clone, just install the upgrade on the new drive. All your data will remain intact, and the intact original of 200 GB drive is secure.

PS > you need a spare sata power and data leads to the clone. Look inside and see what led power is hanging loose. Then I can suggest an adapter or cable. As the DVD is IDE, (not Sata) from what I've read, you will need a Sata data cable also.

Expansion / Upgrade ProLiant DL380 G5 and ProLiant DL360 G5

Similar Questions

Maybe you are looking for