Deactivation of reactivation

Similar Questions

• Deactivation and reactivation of the campaigns

  I feel like this is a stupid question, but I can't find a clear answer in the documentation. I need to add a step to an active campaign. If I disable the campaign and you add the step, what happens when I register and activate again? Is it just keep chugging along where it stopped or he starts again?

  Hi Deb,

  Once you reactivate the campaign, that he continues to blow along the where she had stopped and nothing is affected.

  Kind regards

  Francisco

• Deactivation and reactivation? Photoshop Adobe 12 for the new computer items

  I am considering buying a new computer, so the upgrade to windows 7 to 8.1 and thense Windows 10 window when it is released.

  I read that I have to disable and re-enable? my Adobe Photoshop elements 12 once I get my new computer because I can have only one on a computer at a given time.

  However, I am not sure how to proceed. I'm also not sure how I would go to get my Adobe Photoshop elements 12 on my new computer, daft as it might look, as much as I use windows 8, which I did not have as much knowledge of the use as 7.

  I would be grateful for any help. Thank you.

  Thanks for the comments on the link of pse 12.  which is corrected below.  for pse, download both the exe and 7z files are both in the same directory and double-click on the exe file

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Deactivation and reactivation of Photoshop?

  Hello, I have Photoshop and Dreamweaver but my MacBook has a virus and I had to hold my support of tech campus where they have wiped and reinstalled my OS operating system. I have my Adobe products saved and numbers with me, but I do not disable programs before my computer was wiped out. I need to disable them so that I can reagent on my computer.

  This isn't an activation error. The license request broke. Suggest that you follow the tips mentioned here, Setup error 16 | CC, CS

  If same problem, uninstall and reinstall the two Adobe applications. You can download the apps here, if you don't have the installation program. Other downloads

  See you soon!

  ~ David

• TCS4 + CS5.5 + * 3 * machines + Activation/deactivation - Question Jumble

  I apologize in advance if this sounds complicated - I * tried * to make sure that I say only what needs to be said :-) Any help would be appreciated. [Note: I * is * trying to 'chat' with a representative, but haven't even through the deactivation question until they're stuck in the limbo of scripted answer.]

  On the #1 computer, I had already installed TCS2.5 and CS5.5 (Standard Design). So I have Acrobat X Pro (among many other applications, including Acrobat 9 Pro Extended) available.

  Recently, I installed TCS4 on machine #1 (including Acrobat Pro XI), but Acrobat X Pro and Acrobat 9 Pro are no longer available (error message: action is only valid for products that are currently installed).

  I also installed TCS4 on machine #2.

  Now, I need to use TCS4 on machine #3 (and the machine #2). I can live without it on the computer #1 for now, but I would like to be able to use it later.

  Then...

  • I need to disable TCS4 on machine #1 and activate it on the #3 machine. According to a page using adobe, I should be able to do so * without * remove the machine software #1.
    Question: Is that correct?
    Question: Is there a time limit in which I have to reactivate or I'm good at any time?
    Question: Is there a limit to how many times I can disable and reactivate the software and/or a minimum period between deactivation and reactivation?
  • When I disable TCS4 on machine #1, I no longer have available Acrobat.
    Question: I * reinstall * Acrobat 9 Pro (from the installation TCS2.5) or Acrobat X Pro (from installing CS5.5)?
    Question: Will install this older version of Acrobat interferes with the XI Acrobat Pro that is already installed (which I want to be able to use again later)?

  In a Word, I'm doing this because I need to keep the information confidential client on machines #2 and #3 (can't share information on the same machine). They are the main customers for the TCS software. But I also have to use the TCS software, on occasion, for other customers using the #1 machine (even once, cannot share information about ordinary machines). Then... I need to be able to disable the software on a machine and turn it back on on the other. (As you can tell, the issue of the Acrobat version (and other adobe software) applies to each machine - I want to be able to keep two machines running the current software, but the third execution of which my copy under additional license of Acrobat.)

  Thank you all :-)

  Installation and activation are separate and completely independent actions.

  You may have installed software from Adobe which is off - it of still there but does not work.

  Don't tie you in knots - the best thing to do would be to contact Adobe customer service and have given them the counties of activation for all your product to zero serial numbers.  Then, you can re-enable them exactly on the systems you want (just start programs do).

  For more details, see:

  How to move Adobe software between computers, or from PC to Mac

  I hope this helps!

• iOS problem 10 Exchange calendar sync

  iOS 10 has introduced a bug that causes a problem with Exchange Calendar synchronization. I use an iPhone 5 and an Air iPad with iOS 10.0.2 on both. My employer provides a shared with Office 365 Exchange calendar. I use Outlook 2013 on a Windows 7 laptop. Since I upgraded my iPhone & iPad iOS 10 I met a problem with syncing my calendar. More specifically, when I delete a single instance of a recurring event from my iPhone or iPad, change syncs not on the server and do not appear on my other devices. There is no problem if I remove Outlook on my laptop. I use recurring reminders throughout the day as "to-do's" so not being is not able to remove them from the device is a problem for me.

  Based on something I saw in another form, I tried disabling the button "Events found in Apps" in the settings on my iPhone and iPad and then deactivation and reactivation of the Exchange Calendar synchronization. This has not solved the problem.

  Is there a fix or a workaround for this problem? If not, does anyone know how I can report it to Apple on the off chance they might care enough to solve the problem?

  I have exactly the same problem. Items on my exchange calendar are endangered on my iPhone which is a major issue since I use my phone as my reminder of the main calendar to be in the right place at the right time. This is a serious problem for me. I tried to delete and add the calendar back, putting my phone on and off, nothing works. Now I have even less showing appointments, it is as if he deleted all. I am extremely frustrated.

• Homekit with the iPad as hub problem

  Hello

  I just installed iOS 10 on my iPhone 6 and iPad 2 Air and try to play with HomeKit to remotely control lights of the hue.

  I can control accessories from my iPhone and my iPad, when both are connected to my Wifi network.

  I install my iPad as a Hub HomeKit via settings/Home.

  My iPad is well detected as HomeKit hub on my iPhone by the host application.

  The problem is when I switch off my iPhone from my Wifi network and connect through 4 G: I can no longer control accessories: my iPad is still considered homeKit Hub from my iPhone, but I get failures when trying to turn on the lights/out.

  I disconnected my iPad iCloud account and reconnected (same account iCloud on my iPhone).

  I've disabled iCloud/HomeKit and reactivated it on my iPad.

  I've disabled host/Hub and reactivated it on my iPad.

  I restarted my iPhone and my iPad.

  Checking with 2 factors is enabled on my account.

  I deactivated and reactivated the iCloud keychain.

  I plugged my iPad to a charger.

  Without success, any idea?

  Could it be associated with my case ADSL settings (UPnP is enabled)?

  Thank you.

  Good news: I removed my house in Homekit and created a new one from scratch: it works fine now.

  Thank you.

• How I fix Bitmoji after that 10 updated iOS

  Just deactivation and reactivation of the Bitmoji keyboard in settings did not work for me. Here's what I did:

  To get the application Bitmoji to start working again in the Messages, I took the following steps:

  Settings > general > keyboard > keyboards - slide left on keyboard Bitmoji to delete really.

  Then, I selected "Add a new keyboard" and selected Bitmoji. Now its works well!

  I've done that 5 times and it still does not! If all goes well, they have an update soon!

• All my addon options disappeared from my Tools menu. Help menu item does more either.

  Thus, at random, all the options of the addon under the menu bar tools just disappeared on me. I was not yet close FF, it was just instantaneous. A sec I clicked on tools to do something, everything was fine. Then 2 minutes later I clicked on tools again and all my addon options had disappeared.

  I tried to restore my profile with FEBE, but I can't find the option restore because it is not in the Tools menu. Argh!

  In addition, I don't know if it's related, but my point of menu 'help' will not work. I clicked and nothing happens. I tried a second there to list the version of FF I have...

  I'm 99% sure that I have the latest version. Sorry I can't be specific. I also tried deactivation and reactivation so all my addons... and it solves nothing.

  Does anyone have advice?

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.

  If this did not help, then also delete the files addons.json and addons.sqlite possible.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• can not activate iMessage on Mac

  Hi, since the last update OS X (ver. 10.11.6) I have problems with the transmission of messages from my iPhone to Mac. It has worked before, however after the last system update it stopped working correctly. So, I tried to disable iMessage (on Messages app) and to turn it on again. When I enter my ID Apple and the password, it keeps saying, who "Could not sign an iMessage" and "an error occurred during authentication. Password is correct. So I used my second Apple ID account to activate iMessage, just in case. Same situation. He has recorded for 5 seconds then the same message appeared and I was disconnected. So, I used the first Apple ID - and the same thing happened (me connected for 5 seconds and then disconnects me). I deactivated and reactivated my iCloud. Nothing. I disabled iMessages on iPhone. Nothing.

  Password is fine, but it seems Apple server denies the request of my Mac authentication.

  Any ideas what should I do?

  Thank you in advace

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Why can not my clients or I discovered my own site on FireFox?

  Hello everyone, I'm going to share a video with you here on what happens to best explain it. Please watch carefully.

  https://youtu.be/ryPPctB8iJg

  For those unable to display, in basic, even with all disabled add-ons, I am still unable to connect or discovers Web sites I created. This list of Web sites, please visit: http://wgu.tactivelearning.com/

  Do to see if you too have the same problem.

  Well, interesting fix, it turns out that WP SlimStat was the culprit for some, all simply, deactivation and reactivation Login Redirect Peter and screen connection manager sets the others.

  Strange, strange errors... In some cases, disabling all plugins and reactivate all plugins even worked.

  Thank you Mozilla Team and contributors for your very valuable support! I hope that this information helps somehow for future versions!

  If anyone involved with Mozilla is interested in a deeper look on my sites, I invite you to stroll in the control room with me!

  Have a great day everyone!

• Add on elegant does not

  A few months ago, I installed elegant and it has worked perfectly for a while - and then one day it just stopped. Nothing works. I checked to see if Firefox has updated - nope. I deactivated and reactivated the add-on - nope. I uninstalled and reinstalled - nope. I installed a test script, thinking that maybe the problems were with scripts - nope. I went through the steps as shown here (https://support.mozilla.org/en-US/questions/982460), but that no longer works.

  While doing a last I managed to fix an another add-on which didn't work correctly on Firefox on this computer - I have another computer it worked perfectly on and I think that files on this computer so that he was corrupt. I emptied all the of-on add files on this computer and transferred files to the other computer for the add-on on and now it works perfectly. However, when I tried this for Stylish (which also works perfectly on the other computer) it did not work.

  TL; Dr: there's something wrong with this computer or its files for the stylish add-on Firefox, and I would get everything it is solved.

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• Why is it I can't drag and drop to reorganize bookmarks?

  Drag and drop does not work to rearrange bookmarks in the toolbar bookmarks, window "Show all bookmarks", or in the bookmarks menu. I can 'Cut' and 'Paste' to rearrange things and works in all three, but it's the only way.

  I am running Windows 8.1 x 64 and Firefox 31.0

  Had a similar problem (could not drag the tabs or bookmarks, to reorganize their) with FF 32.0.3. Tried rebooting with the disabled modules, but it still doesn't work. Then tried deactivation and reactivation of hardware acceleration, and it began to work without restart. After the restart with active modules, it continued to work. Weird.

• White tabs of Firefox 31.0, then no fields to twitter and Google maps!

  I'm on Firefox beta update, 30 and 31 now view files for a millisecond and then white - so far making google maps and twitter unusable (both great on Safari and Chrome). Firefox itsself blanks to tabs if I hit an arrow key < or > in the toolbar.

  Rendering CSS problem? JAva? the fact that it works on the rivals is confusing.

  OK it turns out be the hardware acceleration was causing this issue. I wish I had tried the first and save d the hassle of the modules deactivation and reactivation by an etc...

  No update is available for the graphics but hardware acceleration not really don't need of internet access in any case.

  Thanks for el-

• Apple TV Airplay of 4 works is not in Sleep Mode

  Hi all

  I have a problem with my new ATV4 and the use of airtime. If I turn on the ATV with the included remote control, I have no problem using airtime and everything works as it should. However, if I put my ATV in standby mode after a few minutes the Airplay icon will disappear and I am not able to start it by sending the contents of airtime to it (btw the remote for iOS devices app is also not able to connect in standby mode and run it). Now, I've already owned an ATV2 and with this device I've ever had any of the problems noted above. I tried many things such as giving the ATV a fixed IP address, deactivation and reactivation Airplay, restart and finally completely restore the device. After that nothing helps I contacted Apple for support and after several calls which included to restore the device again once they are now trying to tell me that my problem is
  not a problem at all, but it is intentioned behavior of the device. Please can someone of you confirm that you are able to connect to your ATV4 also during the night before and wake up, it? With this information, I would then contact support again.

  I already thank you in advance and best regards

  Oliver

  Yes, I am able to launch an event Apple AirPlay TV 4 sleeping. In my particular case, I have a mixed network (ethernet and wifi) between the two devices.