Dead by Satellite L350D after installing Win7

Similar Questions

• Wired LAN undetected on a Satellite U940 after installing Win7 Pro

  Hello

  After replacement of the HDD in the Satellite U940-100 and the installation of win 7 Prof 64 b the wired lan device is not detected. According to the documentation, there should be a 'Fast Ethernet LAN' in the U940.

  On the Toshiba support site, there is a Realtek driver available, but no luck. During installation a message appears: Realtek network controller was not found. The network cable is plugged in, but no led indicator. On the router the giga bit led will blink.

  There is no unknown device left in the 'management of the computer--> device manager'.

  Went LAN so where? Any suggestions?

  Thanks in advance,
  Frans

  > There is no unknown device left in the 'management of the computer--> Device Manager. "
  And what is stated in the network adapters? Realtek network card is listed there?
  This is really strange.
  Try to set the BIOS to default settings and check again.

• FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)

  FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?

  Hi Jim,.

  Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?

  Kind regards

  DP - K

• Satellite A500 - sounds/images of default system lost after installing Win7

  Hello

  I bought a Toshiba Satellite A500 with Windows Vista and upgrade to Windows 7. After my installation of Windows 7, I lost all my icons of Toshiba and sounds, as silent image appears so hitting the button mute on the keyboard and the beep on hitting the sound up/down button.

  Before installing, I took a backup of a file from Toshiba and tried to install apps from Toshiba in the TOSHIBA\TOSAPINS folder there. But still not get the default values of the system.

  Would be very grateful if someone could help me to restore those back.

  See you soon,.
  Vikram.

  Hello

  I assume you mean on the menu that appears with the FN keys

  Usually after installing Win 7, you must reinstall the VAP (value added package) and utility Support Flash Cards in order to get the keys FN working again.
  You can download the two page from Toshiba Europe tools.

  I m not very good if you get the same sound that was available under Vista as Win 7 takes care of the own system alerts/sounds.

  But after the installation of VAP and Flash Cards Support utility, you should see the images that appear with the FN keys.

• Satellite U300-14Z - no sound after installing WIn7

  Hello!
  I have the problem (series Satellite PSU30E) next: laptop computer was Windows XP, who suddenly "fallen" and again once it has not issued (as explained by problem SATA drivers). I installed Windows 7 64 bit, but after installing it turned out that the * Device Manager has no audio device *. I reinstalled the system, is now a Windows7 Ultimate x 86 license.

  All options work, but the sound did not always appear. Installing the drivers doesn't help - * OS still does not see a sound card *. What could be the tools to solve the problem?

  Hi whooz,.

  Is that what you have already installed the audio driver from Toshiba Web site? As far as I know Satellite U300 supports Windows 7 32 bit then an audio driver should be listed and works because readers are pre-tested by Toshiba.

  But it is also important that you install the chipset driver and should be installed first. So start with installing the audio driver.

  Also, try to load the default settings in the BIOS.

• Satellite A300 - 9 pm - no reaction after installing Win7 cooling fan

  After Installing Win 7 on this CPU fan stop turning at all.

  Thus, when usage intensive pc shuts off due to the weather.

  I've been try bios update didn't etc no efect.

  Any idea?

  Hello

  It's very strange.
  Have you tried to reinstall Windows 7 again?
  I recommend you to repeat the installation of the OS!

  After installing Windows 7, you must install all the driver Win 7 and tools such as value-added package that is essential for Win 7

  Last but not least go to BIOS (F2) and set it to default settings!
  Save the changes and exit the BIOS

• WIFI does not work after installing WIN7 to HP Pavilion DV1000

  I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

  Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

  Hi, Andreas:

  Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

  Download the zip version of the driver from the link below.  The first file listed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

  Unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

• Features of HDX18t not recognized after installing Win7

  After a clean install of Windows 7 Ultimate, Device Manager reports three devices Base system without driver and two unknown devices (ACPI\ENE0100 * ENE0100) and (USB\VID_138A & PID_0001 & REV_0372 USB\VID_138A & PID_0001).

  As far as I know, all the USB ports work correctly, as does everything that I tested (some ports that I don't use).  I assume that ACPI has something to do with power management, but I can't find any other indications of power problems - well that I had to replace the battery not long before installing Win7 because it was not supported.

  What are these five devices, and how can I find the drivers - especially for the three who seem not to identify?

  I tried to use the tool "automatically find your products and solutions ', but it does not load in the latest version of SeaMonkey, and with IE9, it seems to start but shows no progress after more than an hour.

  Any suggestions?

  Hello:

  This is the base system device.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76497-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The first unknown device that you posted that needs of pilots is that one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-66577-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  The second unknown device what you have listed is this one.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-67648-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

  Paul

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• Impossible to disable touchpad after installing Win7 on Qosmio x 300

  Hello

  I have a laptop Qosmio X 300, which came with Vista. When I was with Vista, I turned off the tap-click for the touchpad because of its sensitivity.
  Now, I installed Win7 and I can't find the options as before. Does the laptop have a synaptics pointing device and I installed all the drivers from the Web from Toshiba website.
  I looked in the control panel and tried to change the settings of the software synaptics touchpad, but I had no luck.

  Do you have any suggestions? Should I'm looking for a driver for win7 for my touchpad?

  Thank you
  Ruxandra

  You can disable the touchpad in the mouse properties too.
  Simply click on the disablebutton.

• E4310 does not recognize the DVD after installed WIN7 drive

  My wife has an E4310 who was no longer necessary to his office. She knows that I like to tinker with computers and the machine seems to be a decent unit. The hard disk has been removed for commercial reasons, so I installed an SSD without any hitch. I also installed WIN7 use of the DVD player.

  Now the problem. The DVD player appears and tested very well using the bios but does not appear in the disk manager in WIN7. I tried several different suggestions I have read here and nothing works. It tells me that the question is somewhere in the operating system.

  Has anyone else had this problem or heard a fix?

  The trick to delete upper and lower filter in the registry did not.

  The program 'detect?"Dell has not helped.

  I tried a few other things that I don't remember now - I've been at this for hours, this one has really confused me. All suggestions are appreciated.

  Hi AXMRDR,

  Thanks for the detailed response.

  To test the built in admin account. The standard user account will be several changes in the operating system to find out the registry. Built in admin account will have its own hive. This could help isolate if the question is related or not.

  In addition, restart and check mode without failure.

  Keep us updated.

• Re: Satellite A300 - fan does not work after installing Win7

  Hello.

  I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
  Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?

  My Satellite canned extinguishing because of this, so I would really appreciate help :)

  Best regards / Ocke

  Post edited by: Ocke

  Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
  Maybe a stupid question now, but have you tried to use the 32 bit version?

  You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?

• Satellite A200 - Webcam no longer works after installing Win7 32 bit

  I have a Toshiba Satellite A200-237 and I formatted my hard drive and installed Windows 7 Ultimate 32 bit once.
  I also installed software Toshiba site (camsoft-20070810084209) of this 1.7 version camera assistant...
  I start the program, but when I want to start the cam I get an error with the message of start the cam. I don't really understand the problem and when I loop upward the CAM system is unknown?
  What can be the problem? I have different version of CASES if so where can finance this?

  On my Satellite A300 (supplied with Vista) I installed the latest version designed for Satellite A500 (Vista version) and it works perfectly.
  I don't know if you can use it on your Satellite A200 but you can try it.

  You can find HERE for your model of laptop Win7 CASE
  CASE I used you can find HERE

  Try it. If it does not let us know.

• Re: satellite C660-26Z: FN keys do not work after installing Win7

  I have a SATELLITE C660-26Z after format and reinstall a new version of windows that my function keys do not work.

  However they work until I connect and then they don't work on any account I can accidentally extinguished they if so is it possible to reactivate them? FN and the keys 1-4 works but the Fn Esc all the way to F9 keys do not work any ideas?

  Thank you

  Ben

  p.s. I have Toshiba value added package

  Hello

  You must install VAP and Flash memory card Support utility.
  The utility of Flash Cards control the FN keys.

  Install and test again

• Satellite A660 - slow start after installing Win7

  I have an A660. Satellite (model aus)

  I installed the 64 bit version of windows 7 and starting to take more than a minute. I was wonderign if I used a retail drive and used the serial number at the back of the computer laptop would it not be a better facility.
  Then, I would install just the stuff I need.

  Also, so I use a commercial version would drive recovery based HARD stop working? (because the commercial version may overweite some entries written in the section the drive boot HARD-now if I press 0 he goes to setup - if rerail version replaces this function would stop working?)

  Thanks heaps.

  Each Toshiba laptop comes with the Toshiba recovery image. This recovery image contains several specific Toshiba and utility tools that begin with OS and also some additional software.

  What you need now is the right configuration. With other words, you can remove the unnecessary software from the system and stop all applications, you need the startup list t.
  How to do this?
  Press WIN + R > write msconfig and confirm with OK. The system configuration will be open. Go to the Startup tab and clear the check box in front of app you n t need initially to the top.

  Of course, you can install a clean version of the OS, but for product activation, you can use the product key from the sticker. This license is for the version of Windows that you have with your laptop.
  HDD recovery works with the factory only settings. When you install the clean operating system, you will not be able to start. What you need to do is to create recovery DVDs after Toshiba s instruction how to do this.

  If you have any other questions please let us know.