Dead by Satellite Pro A120 - no lights or sound

Similar Questions

• Satellite Pro A120 needs new motherboard

  Hello, I need a new motherboard for my Satellite Pro A120 laptop because I stupidly spilled a whole pint of orange on squash...
  It has been dried and cleaned but still no power, just a little orange light flashing...

  I talked to Toshiba and they said it probably needs a new motherboard...
  I've looked everywhere but I can't find a...

  can someone help me please?

  Hello

  The motherboard can be ordered from the ASP in your country, but the new mobo will be cool a small fortune because the mobo is a laptop computer cheap party.

  You can also search on some internet like Ebay or similar Web page s to get a mobo of second hand maybe you could find a second hand Satellite Pro A100 with good motherboard.

  see you soon

• Satellite Pro A120 does not turn on - blinking green

  Hi people anyone can help?

  I have a Satellite Pro A120, which is not used for a long time,
  When I plug in and turn on I get nothing except the lights on the front of the laptop, green power telling me light the d/c plug is plugged in,
  loading light but the power of the light on the front of the battery flashes green twice, then amber once and the fan runs but nothing else at all.

  Could someone tell me wots wrong and how to fix it please?

  Hello

  Indicator of DC IN ((deuxieme left) lights green when the power adapter DC voltage.
  If the adapters output voltage is abnormal or if power outages, this indicator flashes orange.

  ((Troisième de gauche), the power led lights green when the computer is turned on. If you select the "sleep mode" indicator flashes (a second to two seconds) while the computer shuts down.

  If you notice other behaviors of indicator, then it means that something might be wrong on the motherboard. It is not possible to say what could be the problem here, but first, you should check out the bars of memory. Try to turn on the device using a single module.
  If this is not enough, then a malfunction of the motherboard would be possible.

• Satellite Pro A120-154 - how to remove the HARD drive password?

  Hello

  I have the following problem: I set a password for the HARD drive in my old Satellite Pro A120-154 years ago, and now I want to remove or change the passowrd since I'll give you this laptop for my nephew. Instead I don't know the password, I am not able to change or remove, not with the password of Toshiba uitility program and not with the BIOS set up.

  Further I can't find any info on this in the user manual. How can I do this?

  Thanks Tino

  Hello

  I found several useful documents from Toshiba on HARD drive password. Please take some time and pick up some info on HARD drive password and how it works.

  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm

• Prerequisites for the replacement of Windows XP for Satellite Pro A120-107

  I don't know that it will have been asked before, however...

  I received a Satellite Pro A120-107 XP. Because XP is not supported, I would like to upgrade to Windows 7, 8 or 8.1. Who should I go for?

  I think I need to improve my memory (currently 512 MB) at least 1 GB. Or should I go to 2 GB. Which would be better?

  And I need a BIOS upgrade? He is currently using vn 1.50 08/24/2006. If I do, what version?

  In your case, I'll try to install Win 7 on this good old classic.

  8.1 Win is the latest system from Microsoft but I'm afraid, you will have some problems with drivers m.

  Win 7 would be the best choice in this case

• Upgrade SSD for Satellite Pro A120

  Hello
  I have a satellite pro A120, which feels a little tired. I did research SSD upgrades to replace the HARD drive, but I don't know if I can update or not. I would really appreciate any advice or information you can give me.

  Thank you

  Hello

  You can upgrade the laptop with an SSD. You need a disc SSD SATA 2.5 as the A120 supports the SATA controller.
  Not quite sure about the SSD size but I guess a 250 GB should be recognized correctly.

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• Re: Satellite Pro A120 is no sound

  My father made me a laptop TOSHIBA Satellite Pro A120 PSAC1E-0QJ052EN the other day off a friend.

  He used to have Windows XP, but a friend of my father installed Windows 7. When I try to play music or watch videos audio meter at the bottom right shows action but not his fate.
  I tried to download the new drivers and I googled the problem, but I can't get the audio to work.

  I'd appreciate any help I need sound for a school project.
  -Tom

  > watch action but no sound.
  When you open reading devices in sound properties option speakers are set by default?
  You can hear sound if you are using the headset or headphones?

• Satellite Pro A120 - battery not found

  Hello

  Technical details: I have a Satellite Pro A120, purchased about four years, running MS Vista. A year ago I noticed my battery has been virtually exhausted and bought a new battery (this one, to be exact: [http://www.amazon.com/gp/product/B0028NJAL2]). Since last year it worked very well and I have no reason to suspect that the battery itself might have a problem. Most of the time, I have the laptop plugged in, in any case.

  However, recently (last few weeks, I think) I started to have occasional problems when all of a sudden I am notified that the battery can not be found - or rather, there is no actual notification, but the power icon in the changes of system tray with a small red on it X, and then the computer hangs. The touchpad still works and I can move the pointer on the screen, but absolutely nothing else says and there is no way out next to a hard reboot. Sometimes, if I catch the icon change from time to time and unplug the power cord (force the computer running on battery), it actually corrects issues. Not always, though.

  Attempts to seek similar problem descriptions online were not very useful; most of the time, the description does not exactly fit my situation or the Seraph blames the battery or the operating system (which, in my case, to be as the wrong answers, since I said the battery generally works well, and I had the same OS from the start). Also a search of these forums did not have no useful result. I'll call my go - to computer store and see if their engineers have all the answers or if it's just the time to take the old horse pasture and find a new filly, but thought that perhaps the good people on this forum may be able to offer advice (additional).

  Thanks in advance,
  Yael

  > Attempts to seek similar problem descriptions online were not very useful; most of the time, the description does not exactly fit my situation, or the Seraph blames the battery or the operating system (which, in my case, to be as the wrong answers, since I said the battery generally works well, and I had the same OS from the beginning)

  I think that no one will be able to tell what's wrong exactly; I think it is s battery issue but of course, no one can say it it s battery maybe motherboard or just a software problem. OPERATING SYSTEM.

  Usually, the software should not affect the functionality of the battery and I think that it s more material associated.
  The laptop is a little old and the battery seems to be old too so I think that the battery needs to be checked first

• Satellite Pro A120 - cannot install recovery disc

  Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

  It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

  FYI, this is what happens after installing the hard drive:
  I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
  I insert the product recovery disc, put off and then again when you press F12.
  I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
  I then get RAMDISK image loading... which takes less than 2 minutes.
  I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
  I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

  Any ideas anyone?

  Thank you.

  Hi Lapitup,

  Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

  If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

  In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

• Satellite Pro A120 - fan run all the time

  OK, so this is a strange...

  I have a satellite Pro A120. It works with the fan on all the time and sometimes goes on a mayor go slowly (which I think can be reduced to overheating).

  Operating system is Ubuntu and I installed the tool of sensors that tell me about the minute the temperature is 100 degrees c and the next one is 16!

  I suspect that it is perhaps that the heat sink is full of fluff, but I can't find a guide step by step to dismantle the machine, clean it and put it back together again.

  Can anyone help with ideas or resources?

  Thank you very much

  Nathan

  Hello

  You do not need to disassemble the unit to clean the fans.
  You can use a jet of compressed air which helps to remove dust.
  I did it several times and it helped!

  Try it!

• Satellite Pro A120 - clock system is slow

  Hi all,

  Since a few days on my Satellite Pro A120 Windows XP system clock is slow (the data are correct).
  Usually I realize it after turning on the laptop, sometimes even when the operating system is woking! I tried all types of virus/malware/spyware scan, system restore point. I guess the problem is the used battery from the RTC. Is it possible even if the data is correct?

  Thanks in advance

  Marco

  > Sice a few days on my Satellite Pro A120 Windows XP system clock is slow (the data are correct).

  I'm afraid I n t m understand what you mean by system clock is slow.
  The BIOS clock shows incorrect data or time?

  Have you tried to change the time in the BIOS and then to check the time in Windows XP?

  Do this!

• Satellite Pro A120 - Maximum capacity of the HARD drive?

  HI - new here. I have a:

  Toshiba Satellite Pro A120
  Model PSAC1E-04H00VEN number

  It's less hard drive. I have a 160 GB spare hard drive but when I try to install this using the recovery disc, the operation simply sticks on the "Please wait..." message. ». The specification for the A120, I noted that it supports drives of 40 to 120 GB. Which is strictly true and so why can't I just install this 160 GB drive?

  Thank you.

  Hi Lapitup,

  Usually the 160 GB should be no problem because the laptop supports the SATA interface and there is no limit of ability so that you can install each HARD drive.

  Be interesting to know what HARD drive you have installed exactly and if you tested on another computer because the HARD drive itself could be the problem and not on the computer. If the disc is defective recovery disc can t be installed so that you get an error message.

• Satellite Pro A120 - DC-in is flashing orange, why?

  My Satellite Pro A120 DC - in flashes orange once I plugged my universal charger.
  I read my user manual. It is said it can be caused by an abnormal voltage or a power problem but I don't know if my charger is the one bringing or there is a power problem.

  The voltage is correct and I tried to plug in charger everywhere but still DC-flashes orange. In fact, I can t use my laptop when the charger is unplugged because its battery lows down so I can t use my laptop at all when he can load t.

  It makes me think that maybe the battery is the problem. In any case, what is the problem at the start of DC-in flashing orange.

  Please help me what to do. Thank you

  Hi jane18.

  > once I plugged my universal charger.
  And what happens if you use the AC/DC to original Toshiba adapter that came with your laptop?

• Satellite Pro A120 - LCD black screen - Fine on external monitor - fine

  Hi, I have a headache with a Toshiba Satellite Pro A120 mojor. The screen began to move to the blackout at random times and happens more and more. It is not serious if W
  Jayindows has loaded or if I enter the bios, boot from the CD or leave it sitting waiting for me to select a boot device. More often than otherwise, it becomes black, but you can still see what needs to be on the screen, it is simply not at all turned to see clearly. The laptop itself still works very well because it works on an external monitor and makes the system beeps, cd turns etc.
  Have you tried the following:
  Setting of various parameters in the graphics properties and in the bios but makes no difference.
  It also becomes active again if I press FN + F5 to swap monitors but turns off after a few seconds.
  It is not overheating as it's been all night and still sometimes happens when starting Cold Stone.
  I tried to start with / without battery - no difference.
  I tried to start without the disk HARD - no difference.
  I tried to remove the battery by pressing power for 60 seconds, then add the battery and new starter - no difference in power.
  I could have sworn it is the inverter, but it does the same thing with an inverter I know works! do not think that it may be graphic because it works on an external monitor and turn off.
  I'm out of ideas and looking for a genius to fix it for me please!
  See you soon

  Hey Buddy,

  > It turns on but not at all to see clear
  This would mean that the FL inverter is faulty the FL inverter of the internal LCD display controls the backlight of the screen and if the isn t working FL inverter you can see a picture, but very very dark.

  It would be a logical explanation for your problem, because there must be something wrong with the laptop LCD if an external monitor is working properly. Also if it happens in the BIOS the problem is not software.

  In your case I contact an authorized service provider and ask the guys for help. They can check your laptop and this should be done. Here, we can only speculate and discuss the different possibilities because it s just a user forum. EPA has professional diagnostic tools and can order all Toshiba spare parts.

  Good luck! :)