dead motherboard p6130y. can I replace with same MB

Similar Questions

• ODI can be replaced with FDMEE?

  Hello

  I was just wondering, ODI can be replaced with FDMEE?

  These are the questions I want clarification on:

  can 1 - use ODI to achieve the upload of a file basis as done by FDMQ? I think it's possible.

  2 can we achieve break through the ability of the ERPI with our custom application and ODI? I think it will be much difficult.

  3 is it wise to replace FDMEE by ODI and customization?

  4. any idea of license? is expensive ODI or FDMEE?

  
  Appreciate your help guys.
  Concerning

  Hello

  I'll answer your questions, but you need to understand is that FDMEE is built at the top of the ODI and relies on it to make its charges of data etc. It offers is a user-friendly interface and a lot of value-added features like that out of the box auditing, reporting, Pierce back capabilities and an extremely powerful and accessible mapping engine. If your target applications are part of the entire Oracle Hyperion product, then FDMEE would be the wise choice for loading the data. ODI is a business integration tool that can move data between heterogeneous technologies. It provides templates of code in the form of its knowledge Modules that support different, but integration strategies in general, we must still build all streams integration of a set of components, nothing came out of the box. Compared to FDMEE it requires more technical knowledge and is not very accessible to your users of the average company in its pure form.

  (1) Yes you do.

  (2) Yes, in theory, but it would be a customization that requires a bit of work. Why would you re - invent the wheel when you have one output of the solution of vbox offering these features and much more?

  (3) it depends entirely on your needs, but for target of Hyperion applications, for most integration strategies I would say certainly not.

  (4) the licensing models are different. I'm no expert on licensing, but I think that FDMEE is user based licenses while ODI is licensed per processor on staging database technology. Better check with your friendly Oracle for details sales representative.

• How can I replace the same clips with the same interval of time (same settings)?

  Dear Adobe Premiere CS5 Forum,

  I have the following problem, and I would look forward to receiving solutions:

  As I couldn't cut my video with clips in avi codecs (it is very difficult to cut in avi codecs, except that you have a very fast computer), I converted my raw clips in lower codecs. Then I cut my video in low quality codecs. My video is now ready to export.

  But before I want to export my video, I need to replace all the clips in avi codes so that my video is in good quality.

  Now the problem:

  How can I replace the clips (poor quality video codec codec avi), in order to have the same clips in a different codec always the same interval of time. I want the replaced clip immediately have the same interval of time.

  For example: a raw whole clip takes 2 minutes. But just a part / interval of the clip (from 01:00 minute 01:10 minutes) is shown in the video. Now I want to replace this clip with the same clip in avi codec. But it must be the same interval (from 01:00 minute 01:10 minutes).

  I tried to replace a clip. But they each have a different time interval (the lower quality clip is from 01:00 to 01:10 minutes and if I would like to replace the same clip in avi codec is the time interval between 0:00 to 0:10 minutes).

  How can I replace the clip with the same interval of time?

  Thanks in advance

  Leonardo

  Hold down the Alt + Shift; It is Shift that maintains the reference timecode. In addition, this will work only if your proxy clips contains timecode. If they all start to 00:00:00:00, this will not work for you.

• Can I replace with purple plug by a grey connector?

  Hello

  HP Deskjet power my mother 2050B is down after the warranty. It's a 0957-2286 with purple plug type power (30V and 333 mA, on the ground, not connected). Can I replace it with an older type of electricity supply 0950-4401 with gray connector (32V and 700 mA, ground, 16V)?

  Marco

  Hi Marco,.

  No, the fickle different power supplies and risk of damage to the printer.

  Follow step: check the compatibility with the external power supply module below:

  http://support.HP.com/us-en/document/c01321436

  You can contact the parts store in your area to get a new power supply that is compatible with your printer.

  http://h20141.www2.HP.com/hpparts/countrychoice.aspx

  Kind regards

  Shlomi

• Curve of soaked blackBerry Smartphones and does not work - what can I do with it now?

  I went swimming with my curve in my pocket, and naturally, he is now dead.  What can I do with it? send somewhere for refurb? and no, I didn't have insurance, so please don't rub it!

  had the same problem.  people buy it online because they fix them however setting it will cost a lot.  I sold mine on ebay and got 160 for it and put it toward a new phone.

• optical drive replacing with Precision m4500 HDD Bay

  my optical drive can be replaced with a Bay of hard drive and, if so, how?

  Hi Trailrunner2,

  How about something like this?

• Can I replace the motherboard on w510 with

  Hello

  Can I replace motherboard 63Y1495 with 63Y1540 or 63Y1542. It is a w510.

  Recantly, I bought an old w510. The portable freezer randomly and never recoveres. It has been repaired for this before and worked fine for a while. There is no problem, but the motherboard video

  What is your advice? Can I replace the motherboard? Is it a long way? Or is it better to find another laptop?

  According to my notes, 63y1545 is a T510 Board with integrated graphics (Intel). The other 2 boards are W510 boards. They are all the same size and shape, but W510 boards have 4 memory slots and use a different cooling fan. The W510 is a nice machine and worth it if you can get a good price on a Board and fan of fixing. Basic coverage is also different machines 'W', but I don't know if it's important or one you have now.

• After replacing my motherboard, I can't activate my gunine win 7 with previous assistance from product key.plz

  After replacing my motherboard, I can't activate my gunine win 7 with previous assistance from product key.plz

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You can always try phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can I replace the MK2546GSX HDD with MK2576GSX

  Hello

  I have a laptop, Sony Vaio VGN-CR36G/B, which has the MK2546GSX from Toshiba HARD drive and chkdsk reports bad sectors in it. I would replace this hard drive, but I couldn't exactly find the product in the market to buy.

  Please can someone help me to find a replacement for Toshiba MK2546GSX?

  My questions are

  Can I replace Toshiba MK2546GSX with Toshiba MK2576GSX? Are they the same? Is there a difference in its connections or Sockets?

  or

  Can you suggest a replacement for Toshiba MK2546GSX?

  Any help would be appreciated

  Thank you

  J

  First of all, you can use all the HDD from different manufacturers that are compatible with your laptop.

  The HARD drive TOSHIBA MK2546GSX seems to bear 250GB - 5400U/min and 7-pin S - ATA (SATA 150 MB/s)

  This means that your laptop supports the SATA controller and you should be able to also use the other SATA 2.5 SATA drives!

• HP Pavilion 17-e020dx: can I replace a Keyboard(Non-Backlit) with a backlit keyboard in my laptop HP Pavilion 17-e020dx?

  Can I replace a Keyboard(Non-Backlit) with a backlit keyboard in my laptop HP Pavilion 17-e020dx?

  Hello

  This series of computers portable your (and many others) have only 1 option for keyboard:

  Full-size, island-keyboard with numeric pad in black or white finish. Gesture of support: MultiTouch gestures
  activated, two fingers to scroll and pinchzoom as default
  Faucets, active by default
  Support for Windows 8 modern trackpad

  Therefore, you can not replace the keyboard only, you must also replace the motherboard that supports a backlit keyboard. If necessary, it would be a very expensive upgrade.

  Kind regards.

• Can I replace my computer laptop vga 320M with an another one high dx11?

  Hello

  Can I replace my laptop ' HP Pavilion dv6t-2300 CTO Entertainment Notebook PC "graphics card 'nvidia geforce gt 320M' with an another one high dx11?

  Hello

  Your graphics card is integrated into the motherboard, and therefore, is not an evolutionary element.

  Kind regards

  DP - K

• What other can I replace my DDR400 (CL3) with thnx

  What other can I replace my ram DDR400 (CL3) to THNX Board

  Go to http://www.crucial.com/index.aspx

  Either click on the tab "Memory Advisor" and select your computer by using the drop down menus or click on the tab 'System scanner' and let it scan your computer.  You will get all the information on this type of memory will work on your computer.  If you think that it is too expensive to buy Crucial memory, you will at least know what to look for.

  You must use the type of RAM your motherboard was built to use.

  As far as 3 beeps are concerned, you are right that they are related to a problem of memory - or with the controller on your motherboard.  If you have several sticks of RAM now, look at the User Guide to determine which slot should be used if you have installed and then stick out the other sticks.  If you still have the problem, remove the stick in that you left and replace it with the others.  If you get the beep is used regardless of the memory card, the problem is more likely to be with the motherboard.

  See:ttp://forums.pureoverclock.com/general-hardware/3935-motherboard-beep-codes.html

  If you post back, please use English and write in complete sentences rather than using the spelling errors and SMS abbreviations.

• can I replace cq50 motherboard 501266-001 494282-001

  can I replace my compaq cq50 card mother partnumber 501266-001 with a compaq cq50 motherboard 494282-001 part number also what is the difference with these two cards

  dancrucifixxx wrote:

  can I replace my compaq cq50 card mother partnumber 501266-001 with a compaq cq50 motherboard 494282-001 part number also what is the difference with these two cards

  Hello

  This Board 501266-001 is listed as compatible only for CQ 60 models:

  UMA, GL40 System Board (for Presario CQ60 computer models only; includes top
  modem and replacement of thermal equipment) 501266-001

  However, the Board 494282-001 is listed in two manuals for CQ 50 and also computers CQ 60 laptop. I think it could work, but take a look at the service guide for the CQ 50 laptop yourself:

  http://h10032.www1.HP.com/CTG/manual/c01572022.PDF

  I mean that you can certainly use the 494282-001 laptop Compaq 50 Council. I think that 501266-001 card has no HDMI port and a (Digital media slot?) card reader.

• Why can't replace my drive hard hp compaq 6200SFF 250gig with the largest disk

  I think I posted this in the wrong section earlier.   I want to replace my drive hard HP Compaq 6200SFF with a larger 250gig. I've done it before with other computers with no problems. I bought a 500gig drive at a local store and makes a picture of Symantec Ghost (option was image-boot) to my 250gig drive.    Then I installed the drive and started again with my ghost drive.  Normally I just launch the function of disk image restore to restore the image of the old drive to the new drive.  When I tried to do with the 6200, very well restored ghost image but as soon as I start on the new drive, I get an error message saying that "windows does not stop normally.   I never get to see the Windows Startup logo and welcome screen or something else than this black screen with white letters.  Windows did end normally when I was last using the 250 GB drive and it will power off.  I can't get the restart to go further - I just get the same error screen - there is no options or choice - all said the message is to call your service representative.  Is there something special about 6200 readers?  Do you need to do something instead of or in addition to making a ghost image?  Is it something in the bios that should reset itself?

  Thank you, Hanspuppa.  I think you have a more recent version of Acronis, I ghost.  However, I was able to solve my problem using the Windows repair disk.  I ghost a disk image (ghost - ib) of my drive hard old man and then did a ' local disk image - of ' put the image on my new drive.  I received the repetitive message "Windows 7 does not normally" but then inserted the windows repair disk and booted from it.  He finds that the boot image on the new drive was bad and repaired.  He did not cela easily - reboot/turn off many times before the finished repair disk, I had and the pc booted from the new hard drive properly.  Now, I can do this with windows 7 and the emulation of hard drive has been to AHCI.  Knit a friend and I tried to do this on an another HP6200 with an image of Windows XP. We did not have a handy XP repair disk, but we went in the settings of the bios under storage on disk and passed the SATA AHCI to IDE emulation.  When we restarted Windows message here once, we supported on enter and him went pc to boot normally.  So the problem revolved around the difference in the AHCI IDE and the boot image created by Ghost.

• I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost?

  I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost? If yes how can I do this? Some people reported issues license keys and it cannot be registered once in a PC.

  Thank you

  It is the major limitation of the OEM software that it can be installed on a PC. The COA label will confirm whether the license is OEM. A number of elements can be replaced in a PC in the way of repair, but only if exactly the same model of Council can this be exchanged.

  Even if you transfer the drive to the new PC would not authenticate because of the change of equipment, and it would be unlikely to to re-authenticate online.

  If the label is not OEM and you have a retail package, so it can be transferred.