Dead on new DVF-L700 pixel

Similar Questions

• Satellite A300-1EG - dead with the graphic card pixel problems

  Hello

  Not after two months of use of a brand new Toshiba A300, I had a dead pixel.
  Its only I guess, but what intrigues me is that it could be somehow merged with disorders, that I got with my graphics card.
  I had trobule with S-video use, there was a bad image, without collors.
  Is there a chance that I can have my screen replaced?

  Im still under warranty.

  Thank you

  Hello

  Regarding the dead pixel:
  > Is there a chance that I can have my screen replaced?
  I doubt that the screen would be replaced only due to a dead pixel.

  Please check out this article from Toshiba. I found it in the page of knowledge base of Toshiba.

  + What is the maximum number and type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels? +
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  You will find details of the maximum acceptable number of holes per 1 million pixels.

• Dead on the Ideapad Z570 pixel

  3 butterflies have elapsed since I bought a new Ideapad Z570. A week ago I noticed a black dot near the Windows Start button. I tried to wipe it with a cloth, but he was always there, discovered it's a dead pixel. I called Lenovo support, send some pictures and they have confirmed that this is a dead pixel and to guarantee it must be 3 dead pixels. They also told me that if I want my screen has changed, I have to pay 160 euros aroud. I don't think it's ok only after 3 months of use, a laptop should have this kind of problems and I am very disappointed with the response, I received service of Lenovo. After I paid 700 euros for the laptop around to pay another 160 for a display. I've owned computers portable to other brands but never had any problems. Now I have to wait and hope that more than 2 pixels would die?

  Sorry to hear that, but there is nothing that you/we can do about it. warranty does not cover replacement if you have less than 3 dead pixels.

• Dead on Qosmio G20-128 pixels?

  I've seen a few dead pixels on the screen of my Qosmio G20-128. The number of pixels is greater than the minimum value for the use of the guarantee. I have to send my laptop using Toshiba. But I absolutely need the laptop for my work!

  Y at - it an option to have a computer mobile substitution (an old book may be useful) for the period where my Qosmio is on life support?

  Hi Luca,

  I don't think Toshiba to apply a system of loan of portable computers so that your own is being repaired. The warranty covers only repair real and in my opinion, it specifically excludes any indirect loss or inconvenience.

  I hope that your repairman will not need to keep your laptop too long but it is worth to ask in advance.

  Kind regards

• layers removed, now all new files have pixelated bands

  I was working happily away until suddenly almost all sections of my document deleted. Then I restarted photoshop, restarted computer, utility disk, disk of verified work, gave to photoshop more memory. However, the file still has white layers, and the new file that I create is pixelated and "scratched", like this:

  

  Use Photoshop CC 2014, Mac 10.10.3. Now the file I was working was small size 100px by 100 px, but he had about 200 layers, is this a problem? Is there a sort of preference I can chuck?

  Try resetting your Photoshop preferences. If that doesn't set you problems, you can have a device or hardware driver problem.  Display problems are often similar to what you posted.

• Migration of disks of Ultra6 DEAD + my new 516

  My Ultr6 + died, but the data on the disks are fine. I bought a new 516 by support, so that I can migrate the Ultra6 + (WITHOUT BACKUP) disks to the 516.

  I tried get an expert on the support chat online, but have been put on hold for ever and a day :-D

  Is there information somewhere for me to follow to make this migration procedure? I searched the forums without success.

  Thank you!!!

  Yes. Need you a place to copy the data. If you need more 6-disc for this very/more space, it is what you need.

• W500 'dead' with new software, gps works after reinstalling older software

  The upgrade of the software gps-enabler on my 4062 (ericsson hspa) 2.50 let GPS 'dead' (not even respond to the dedicated com port). This 'upgrade' uninstall and go back to 2.4 return GPS.

  OS: Install Windows 7 Ultimate x 64, fresh with thinstalled thinkvantage sofware.

  Svein

  Resolved, see: http://forums.lenovo.com/t5/Windows-7-Discussion/W500-gps-problems/td-p/202620

• I have a 3 TB Barracuda that I formatted XP last year, while the computer is dead. New cesktop, Windows 7, how do I re - format to access all 3 to?

  When I install XP, I got 2 TB, but no access to the third to. That's why I need to reinstall.

  Help will be very appreciated.

  See the following topics:

  Support for Windows for the hard drives greater than 2 TB

• Dead Pixel policy

  Hello

  I was wondering if anyone knows if Sony has a dead pixel policy? As dead pixel how much you need before you can get repair/replacement of parts. I know others have them... but I was wondering if sony has one or not?

  I just got my new Sony Vaio Flip 15A and found dead on it a few pixels (pixel black no matter what)...

  Hi citronpourri,

  I'm not sure on the number of pixels required but here is a link that you can use as a reference as to what you can do with this problem. Please click here. Hope this information helps.

  -MarkC

• Had to reinstall CS2 in new computer Win7x64. Old hard drive of the computer is dead. Could not recover. Cannot enable reloading of CS2.  Any suggestions?

  I recently had a Win7 computer down and I decided to buy a Win7 upgrade solid x 64 computer.

  Reloaded all my apps I had on the old pc (couldn't use the old hard drive.  He's dead!  New system has SSDS)

  Each top-up went fine except for my CS2 software.

  He said that I had to activate my software.  Not much so I tried via 'internet' and received a window "Activation Server is not available".

  So, I went "Phone Activation" and got a window with my serial number and an activation number, with the Activation Type: Normal 24:24

  He said to call 866-772-3623, which only said to go to www.adobe.com/go/activation everything which was take me for an explanation of the activation page who basically told me to do what I had done in the first place.  for example, no help at all.

  I tried the direct number: 206-675-6222.  (The number was disconnected)

  So my question... How can I get an activation code of my CS2 software?  Where should I go, either by phone or through the net?

  You need to acquire a special version with its special activation code.  See the following...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• How to resize avatar 180 pixels wide to accommodate the requirement of FB

  What is the best way to resize an avatar stock 180 pixels wide to accommodate the mandatory picture of FB?

  Thank you.

  Right click on the image and choose "open with > Paint.

  In the Paint toolbar, click resize.  Choose your new width in pixels.

  Click OK, and then save your image.

• Bug? Illustrator CC 2014 and parameters of the pixel grid does not.

  Hello

  I noticed that in Illustrator 14 CC when I make a new web document with 'align new objects of pixel grid"selected, as I work in the document any of the new forms that I would actually align to the grid without enter me the transformation Panel and selecting the option for each new form manually.

  Is it a new parameter in 14 I'm missing? Obviously it is not a totally disabling behavior there is a work around, but it of still pretty annoying and slows down my work flow. Any help or insight is appreciated.

  Right, new tool Rectangle Live objects are free to align it on the pixel grid until you release them expanding their.

• The size of the image in pixels in EP 11?

  I just tried to resize a picture and set the new size of pixels. It does not give me the option. Can you help me?

  You work in quick edit mode. Click on the Expert above button to access the Expert mode.

• How to disable snap to grid of pixels?

  I guess that I have created a file with snap to grid of pixels put on the market.

  Cannot find out how to turn this option off.

  Created a new file without Pixel Grid Snap activated and glued the art in it... still struggled to properly align the points. Harumph!

  In any case, could someone please tell me how to disable Snap To Grid Pixel?

  Thank you!

  Use the transforam palette which stops in the flyout.

  

  You also have another setting on the bottom of the range of transformation.

  Also check to make sure you saw amek > snap to the network.

• The number of bytes is the data type of "pixel"?

  I'm relatively new to use Pixel Bender to process audio data, so I'm sorry for my lack of understanding of what follows.

  I had a question about the data types 'pixel' and 'image' Pixel Bender.

  I'm trying to understand code Kevin Goldsmith has written for his mixer 2 channels of audio and there seems to be a gap between the amount of data sent to the shader of PB, and the amount received when the buffer is sent to her for treatment.

  Here is the link to the code:

  http://blogs.Adobe.com/Kevin.Goldsmith/2009/08/pixel_bender_au.html

  At the top of the code, it says a "BUFFER" of 2048 constant:

  private public static var Buffer_size : uint = 0 x 800;

  Then, in the processSound() function, he implemented an byteArray with a size of 16 384 bytes:

  shaderBuffer. length = BUFFER_SIZE * 2 * 4;     <---(échantillons stéréo 2048 * 2 * 4 octets/échantillon)

  However, I am confused about the part where it defines a hypothetical image and sends the data to the shader:

  effectShader. data ["source"] . width = BUFFER_SIZE / 1024;     <---(2048 / 1024 = 2)

  effectShader. data ["source"] . height = 512 ;

  From the code above, one can easily see that the size of the image is only 1024 "pixel" (2 * 512), and on the receiving end there is a "image.4" of variable entry expected to receive.  So far, I was under the assumption that a data type "image4" consists of a variable amount of pixels (determined by the size of the image that is food inside), each composed of 4 layers of color of 1 byte.  In this logic, each pixel in a data type "image4" should consist of 4 bytes.  Now, let's do the math: 4 bytes * 1024 pixels = 4096.

  4096 is not equal to 16 384!

  How can feed you a 16 384 'byteArray' bytes in a variable "image4" of 4096 bytes?

  I'm sorry to seem presumptuous to the explanation above, but I can not understand what is happening here!

  The number of bytes is a 'pixel' in PB?  He holds float or integer values or both?

  I've scoured the web to find these answers, but nothing helps!  Maybe I'm off the mark with my current understanding of the pixels and images in PB, but I need to understand this before I can move with the application that I do.

  I am very grateful of any advice or information that someone can give.

  Thank you

  Matt

  This is the Pixel Bender Language Reference:

  "pixel1: represents the value of a single channel of an image." The name distinguishes this
  single element pixel of a pixel which contains several channels. The pixel values are
  considered as 32-bit floating-point numbers. »

  32 bits = 4 bytes

  If a channel is four bytes rather than that you have accessed. If this should explain the difference.