Tecra S3-130: why fan still working

Similar Questions

• Tecra A11 - 11 L - fan still working

  I already turned on eco mode and 1 core CPU temperature is 22 ° C and core 2 is at 15 ° C.

  I have even an SSD in this laptop, so it should be cool and silent. Cold air comes out of my laptop and the whole case is still warm (really, I hit the computer laptop while at the top of the page down, everywhere!), but according to PC Health Monitor the rest fan continues to operate at 50%! It is certainly stronger than my old laptop.

  Is this a problem with my laptop, or the A11 series has this problem?

  You come in on the problems
  I put t see any problems
  The fan operates at 50% and therefore the temperature is low
  If the cooling module would not go, then the temperature would be much higher

  In any case, you can check the Win7/Vista power management.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  In power management, you can set the performance of cooling on the lower level.

  I also recommend updating the BIOS. If a newer version is available, and then run the update.

  Welcome them

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• Toshiba Libretto W100 is hot and fan still works

  Hello

  my new Toshiba libretto W100 is still very hot and the fan is still running.
  Even with programs that use few resources.
  If I use programs like Trackmania or Fifa 11, the temperature rises again, and the fan works very quickly and loudly.

  Is this normal? reduce the temperature and noise?
  Thank you. Best regards.

  Hello

  I think you use high hard who insist a lot on the CPU.
  This causes higher heat dissipation and therefore the temperature drops to a higher level and this is why cooling modules run faster.

  So in my opinion, everything is ok here; It s nothing unusual in the world of computing. the warm air must be removed, and so the fans run at a higher speed.

  I think that the fans don't run faster if you use low performance applications. Right?

• Cooling fan still works with an average speed on the Satellite A100-405

  Hello guys,.

  If anyone can give me a reason why my satellite cooling fan is always running at speed average. I shot all the "Toshiba Power Saver Properties" settings, to "Battery Optimized" condition and so I took the battery, and the pleasure of cooling is still running and operating at average speed. I'm in a place of model (18 Aºc) without any direct exposure to the Sun or heat.

  If you can help me about whether or not it is a normal condition. I think that it is not normal to have fun all the time for work. Runs normally for 2 minutes and stops during a similar period (used to be the case in other phones that I had in the past).

  Maybe, I need to set or check adjustments internally or in the Bios. I really don't know and I'm really worried about it.

  Thanks guys... Please respond.

  Laptop cooling depends on the use of laptops and the applications that run on the laptop.
  Strong performance of the software is running on the laptop each part as CPU and GPU produce a lot of heat.
  Have you tried to use a material like Speedfan monitoring tool.
  SpeedFan is a freeware program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips

  But back to the energy saver. In the eve of power configuration, you should try to the CPU for auto control method and try to change the processor, the speed of processing and cooling method.

  Don't forget that there is enough free space around the laptop. It is important for the circulation of fresh air.

• Satellite A30 - fan still working

  Hello

  My Satellite A33 (although the case said A30 my model number indicates otherwise), there are problems of overheating for some time now, the fan always runs at full speed. I'll have to raise the notebook so that the fan can get more air.

  I'm not sure why this happens, is just needed a clean place (never did)?

  I looks as if it has two fans, and it does not blow out as much air as the other or not at all. I don't know much because I moved new laptops, but I use it when traveling.

  Can you help?

  Thank you.

  Hello
  You say you ' never played cleaning and this may be the reason for overheating (clogged cooling module). So, do the following:

  1. clean your computer with air well. If it does not help and your computer is out of warranty you can take it apart. Check then if it has 2 fans (I dunno if this model comes with 2 fans if it has 2 fans and them does not work replace it at all).
  If you decide to dismount, step this www.irisvista.com link to remove the statement

  Welcome them

• Tecra A9 - after CPU fan upgrade works constantly at full power

  Hi all

  I have 3 Tecra A9 notebook that came with a Core2Duo T7100 clocked at 1.8 Ghz with 2 MB of Cache. Updated every 3 to a T7700 clocked at 2.4 Ghz with 4 MB of Cache. According to Intel, these two processors TDP is 35W. Books don't get really hot and not hot. The CPU FAN starts right full power after the display of the BIOS with the Toshiba Logo screen. Under Bios Version 2.1 on all 3 systems, having the same behavior on all 3 systems. CPU properly recognized under Windows XP, Win7, and Win10. Is it possible to get the adjusted to normal CPU fan? The system isn t is hotter than upgrading the CPU, just for some reason any BIOS has now decided the fan must operate at full power. I even traded one of the CPU Fans with that of a Tecra A10 notebook but had the same effect as with the original fan. Having no idea what I could do. I hope for your help!

  Best regards
  Bornchiller

  I think that needs calibration to be performed to configure the table of fan speed.
  Toshiba Service Center to do this.

• Satellite L655-1HC: win 8.1 Fan still work and / is not closed

  Hello everyone,

  I have laptop L655-1HC owner, part no: PSK1JE-0GT00XAR, where am facing 2 problems I couldn't solve until now.
  First of all, the fan continues to work always and stops any bothers me really.

  Second, when closing, windows turns off but the machine continues to work with the fan and never stops unless I stopped it with the key switch seconds, even when I close the lid, windows turns off but the machine continues to work with the fan, at the opening of the lid it is freezing just until I stopped it manually through the switch.

  Before two or three days windows crashed down and I formatted the laptop and upgraded to windows pro 8.1 and since updated, I was faced with these issues.

  Hello

  I think that the problem is related to the system Windows 8.1
  Probably it of not known you 8 Win and Win 8.1 does not power the unit off by default. The laptop will be defined in hybrid close mode that allows you to boot up the laptop faster.

  I guess this could be the reason for your problem and recommend that you deactivate this mode.
  Please check this document Toshiba how to do this:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  Your comments would be appreciated

• Fan still works after stop (10 of Windows).

  Hello

  I installed 10 windows in my Inspiron 15 3542.
  When I shut down the computer, sometimes the fan continues to run until the battery runs out.

  So I continue to press on button / shut down and turn off the power to the laptop.

  Previously, I had Windows 8.1 and no problem at all.

  Any guy healpful ideas?

  This seems to be a common problem with Windows 10. The culprit is Intel Management Engine (IME) v11.* Since v10.* This has been a problem. What you need to do is to install a V9 or V10 IME and the system will work as it should which relates to the power off, the sleep and hibernation. I had the same problem and pilot declined to v10 and everything has been fine since. 2 weeks and no problems.

  If you can't find the drivers on the site of Dell back, get the driver Intel ME here. Simply use the driver installation and answer that you know you are going back on the driver level.

• Qosmio F60 - fan still working

  Is this normal? I have another laptop and the fan is quiet...
  Any suggestions?

  I read that the BIOS upgrade does nothing good...
  There will be a new version of the BIOS?

  > Is this normal?

  No, this is not normal. Perhaps, your laptop is overheating due to dust. First of all, clean it up:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  > There will be a new version of the BIOS?

  in this forum, no one can tell you when it will be released. You can always check on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
  Also, try to update chipset driver utility anddisplay

  Post edited by: Jeka -?

• Why the JRE is needed? [I uninstalled temporarily and FF366 still working]

  Why the JRE is needed? I uninstalled temporarily and FF366 still works.

  JRE is commonly referred to as Java Runtime Environment, it is not required for Firefox run, but it will require a lot of web sites.

  For more details, see using the Java plugin to display interactive Web sites content and http://www.java.com/

• Screen goes black but still works on Tecra M2

  Dear forum,

  I recently started having problems with my toshiba laptop tecra m2. The screen started to lose its luster and blink in a dull white, then all of a sudden return to his brilliant bright white. I saw also that the screen went white, I heard a "whistling" coming behind the matte screen.

  All of a sudden a black bar runs through the screen from the bottom from left to right, and the screen was cut off. I'm sure that the processor still works its the screen with the problem only. I need help and how I'll be able to deal quickly with the minimum of effort. I need to retrieve some business data stored on the laptop emergency.

  Please reply with any of your suggestions. Thank you.

  Andy

  So to clarify the screen is black with no picture at all! All I get is the black screen with no data or images. I need help, I did some research and discovered, it could be the lcd inverter and backlight. So please can help you, I'm in a bad situation and need help please.

  Thank you.

  Hope to hear from you all
  Andy

• I subscribe to the student package and I also received a confirmation SMS saying that the sum was deducted. But when I connect through creative cloud, it shows that I'm still working on a trial version. Why is this?

  I subscribe to the student package and I also received a confirmation SMS saying that the sum was deducted. But when I connect through creative cloud, it shows that I'm still working on a trial version. Why is this?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Mylenium

• Update of the extension did not start more and why disappeared my (still works) add-ons/extensions in the add-it-manager?

  I use ff4 beta3 on a Win7 PC, this problem appeared in the beta 2 release.

  Some extensions still work very well: Adblock plus, NoScript,.

  Others appear in the menu of the hull, but aimless: video download helper, Ubiquity (a small rectangle behind the arrow in the menu right-click) and no longer work.

  Updated extensions via the button in the gui management either dosen't work.

  This problem is permanent. I don't think that there is a problem with some extension, but I could be wrong. I had installed about 30 extensions, many have been disabled.

  Thank you very much

  Andi

  Beta 4 is already available (24 August): http://www.mozilla.com/en-US/firefox/all-beta.html

  Beta 5 will probably be released next week: https://wiki.mozilla.org/Releases/Firefox_4.0b5

  You can delete the files (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) extensions.* and compatibility.ini in the Firefox profile folder to reset the extensions registry. New files will be created if necessary.

  See "extension corrupted files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

  If you see disabled extensions are not compatible on the next departure in "tools > Modules > Extensions" and then click "Find updates" to do a compatibility check.

• Fan still to go at full speed

  Hi all!

  In recent weeks, when I start my MacBook Pro (as of 2011), the fan starts immediately runs at full speed. Everything works fine, but it's more than a little annoying (loud and it drains the battery...)

  I tried the solution described in the article: to reset the SMC. I'm not very good in computer science, but I followed the instructions and I think I did it right (closed, shift + ctrl + option + on /-off button, startup). Unfortunately, this does not seem to have done the trick... The fan still runs as he wants to be a helicopter when he grows up :-)

  Is there anything else I can try?

  An Application can sometimes fans rev, check your login items to all apps from loading at startup and remove them, there is no change, you can add later.

  You should try to reset the SMC again, do two or three times and make sure that the Magsafe adapter is plugged. If the fan continues you may have a hardware problem, try to run the Apple Hardware Test to see that if he reports an error using Apple Hardware Test - Apple Support if your computer originally shipped with install disks you meed disc two of gray's original installation on run AHT, insert it and reboot holding the key D. run the AHT two or three times in extended mode or until it reports a problem.