Deadline until the first byte

Similar Questions

• Drop-down lists lists loop until the first position when scrolling down

  Original title : Drop-down lists keep scrolling to the first position

  As soon as there is a drop involved or any time there is more than a list of what can be seen on the screen, something is causing the list to scroll to the first position.  It also happens on anything that uses a mouse to move a bar on the side, using keyboard does not help, she returned at the beginning.  Please, someone let me know how to solve this problem, I can't get anything done as much of what I do has lists in drop-down lists.

  Thanks for your help

  BlueFairy2012

  Hello

  1. the problem occurs with any particular application or all applications?
  2. don't you make changes to the computer before the show?
  3. what operating system is installed on the computer?

  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Additional information:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• The first byte of the MAC address cannot be bit odd?

  Hello

  I get the error message when you try to enter a specific MAC address starting with 01:18 to use in a virtual map.

  No reason for this restriction? Some way around it (manually edit the vmx doesn't...)?

  Thank you

  As already mentioned the Woody, the VMware MAC address range is limited. This isn't a matter of marketing, but based on recorded officially beaches of MAC addresses (see http://standards.ieee.org/develop/regauth/oui/oui.txt) the alternative registered MAC addresses - it is e.g. XenServer use the use "administered locally' MAC addresses (bit 2 of the most significant byte to 1 game) is explained this as well as the reason for the mistake with a first odd byte (unicast and multicast) MAC addresses in http://en.wikipedia.org/wiki/MAC_address

  André

• If someone else on the network as open thunderbird, nobody else can use it until the person origional closes their? Please tell us how to solve this problem.

  We use thunderbird on a network of several computers connected to an e-mail account. If someone else uses thunderbird as the sending and receiving of emails point on the other can use thunderbird at the same time until the first person close Thunderbird. How can we solve this problem?

  Do you know if your installation uses the IMAP protocol?

  Your problem may be due to the server; It can be configured to allow only a single connection at a time.

  Different users share a common profile? This would give the symptoms that you describe, since the Thunderbird locks his profile.

• Why the VI does not work the first time?

  Hello fellow users of LabVIEW

  I did a VI that pulls data from a worksheet and then manipulates the data in different rows and columns to give a final spreadsheet of desired values.

  This VI works fine for me, except when I run the first time only, in which case it gives me values of nonsense.

  Could you please tell me what I'm doing wrong with the block diagram. It could be a problem with the data stream.

  Thank you

  mhaque

  My guess was very good.

  Yes, you have a race condition.  You read some values through a local variable in the upper part of your VI.  But you write in fact of all values of these indicators until the first image in your sequence structure.  Either thing could happen first, but it is very likely that your local variables are read first.  Thus the default data meaningless.  You should put these calculations in the first image of the sequence structure.  And use wire to one of the constants in the calculations rather than a local variable.

  In fact, I don't know if you need to use local variables anywhere in your VI.  And I also believe you can eliminate both your internal and external sequence structures.  You should always use wires to define your data flow.  The structure of your internal sequence pretty well done this already.  And if you get rid of your local variables and connect to the source of these values, no sequence structure, no variables, and no race condition.

  Try this VI.  I cleaned up.

• Sometimes the lost bytes, reading the serial port

  Hello!

  I'm reading the serial port data (flow rate 57600 baud rate) that works very reliable so that I do not open any other window

  or minimize/restore my window of the application during the program is running. Then a byte of incoming data will be lost.

  I get a string of 30 bytes each 50 m in most of the cases the first byte is lost, sometimes one in the middle.

  This occurs not only on a PC.

  Is this a problem of LabVIEW or Windows?

  Are there settings that can solve the problem?

  Best regards

  JK78

  I solved the problem.  

  There was a bug in my program who become visible only if a window has been reduced or restored.

  When there are two or more messages in the buffer VISA, the separation of the messages was incorrect.

  Array index corresponded to false so that the first byte of the second message was at the end of the first

  and so the second message in the buffer seemed incomplete.

  In normal operation, the playback loop runs so fast, never both messages are in the buffer.

  Thanks for all replies.

  JK78

  Either way, I work with LabVIEW 2009 and serial interface hardware motherboard. With XON/XOFF flow control

  is not possible in my application because all the hex values from 00 h to FFh may appear in a message.

• BlackBerry Smartphones PRIV - Notes will not save text up to the first synchronization

  I have a Priv of Blackberry that is synched to Office Outlook 2013 professional my desktop, running on Microsoft Exchange.

  A month ago I started having problems with the synchronization of Notes between my mobile and Outlook.  It seems that any text I key in a Note on my private will be kept until the first synchronization with Outlook, if yes or no I typed 'Done '.  Can I add text to a note for a long period of time and wait until I'm completely done for tap 'Done' or tap "Done" after a short period of time and then come back in the Note to continue editing.  It does not matter.  No matter what the text has been given in the first few minutes (up to what I assume is the first synchronization) is the only text that will be retained.

  I don't have a problem with whole Notes that are created on my desktop is properly synchronized to my priv.

  I have no problems with Mail, calendar, Contacts or tasks synchronization.

  My synchronization interval is set to "automatic (Push).

  While responding not to the root cause, I seem to have a solution.

  As a first step, our technology people suggested I have delete the account and add it in again.

  That seems to have done the trick.  Since last night, all my Outlook applications are synchronization correctly, in both directions

• Pagination fail on the first load

  Hello
  I didn't know how this search if there is no post on this subject, I would be happy to check out them.
  
  On the first page load, the report seems in good condition with the news, but when I go to the next page, it is said that has not been found no results. If I come back and submit the page, then go to the next paging in the report he found the data. Even if I send the page before moving on to the second paging.
  
  At a meeting, I noticed that the elements have a value until the first submit, but the report of NVL and should not be a problem, test of this is that the first page in the report shows the content correctly.
  
  Any ideas on why I send the page before the report pagination works? If so, how can I do so that it sends the page to the first charge?
  
  Thanks in advance,
  Marc

  Hi Marc

  Assuming that you have filters on your page, including selection lists, this is pretty typical. Is what I tend to make lists of selection used as filters to define the default values for nulls (-1 for numerical values) and ZZZZ for strings AND these values are defined using calculations of page (depends on the item is null and set to run before header). In this way, the elements have values already for them in the session before the report is even loaded.

  Andy

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• I installed again by returning to the first CS6, but once again loads and a new project is created, it blocks (outputs) until I can do anything.

  I followed the procedure described on the first CC, installation first CS6 uninstall Web site, leaving still installed and reinstall CC first uninstall. I also installed the menu presets as described on another page of the website.

  Yet of the charges and I'm trying to create a new project by specifying the path and to project name. Until I can do something more, yet ends with a windows dialog on "Due to a problem must exit the program.

  I noticed that some of the text boxes were filled with the values corresponding to old projects so still contains the old configuration information from somewhere.

  Sorry; I missed what is obvious:

  See the Adobe Application preferences recreate here:

  Resolve system errors, freezes | Mac OS 10.x. Adobe software

  I think you can continued to have problems if you can not uninstall/clean/reinstall.

  If the preferences reset help, create a DVD, Blu - Ray not, for your first tests. Also, have no disc in your burner.

• Hold the first slide until

  Captivate v4

  I need to be able to open a project on slide 1, but as soon as the blade is open should not run and wait until I have clciked and 'invisible' area to launch the project in the slide.

  Because I want to use the first slide as "intro", while the spectators are get sorted and once they are ready, I can start the project.

  I tried to add a box to click initially, but appears not to brake the slide as soon as it starts.

  Can someone help me please - I'm sure it's something simple, but just escapes me.

  Noel

  Noel, another option, you may think is just to deselect the auto play option in the preferences of Project Start and End.  This will give you a button on the first slide you have to click to start.  Only problem is, you cannot change the position or appearance of this button, and slide behind it will probably be a bit blurred.  Just a thought.

• In Windows XP, unable to connect on another user account, until I log out of the first

  Hello

  I have three users account on my computer. whenever I try to switch to another user, it is not connect up to that I disconnect the first, although I have hepatitis has checked the fast user switching option, but every time I enter another account passwrd and press enter nothing happens. Please, need help.

  Thank you

  Saami

  Is 'Fast User Switching Compatibility' already 'started' and ' automatic? Also check the 'Terminal Services' and 'Remote Procedure Call (RPC) if they have a "Started" and "Autopmatic". You receive error messages?

• My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

  I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

  There is this bug on this problem:

  • http://Bugzilla.DownloadHelper.NET:8080 / show_bug.cgi? id = 642

  I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

  Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

  YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

• Photosmart 5520 lies on the network for the first minutes

  Hello.  I bought a Photosmart 5520 in November last year.  It was working fine until the scanner no longer works last week.  Still under warranty and after checking, it was a hardware failure, HP sent a replacement printer.

  Now try to put in place as I had with the previous (who worked with no problem), it seems to play up.  When I start by putting, it connects to my wireless network.  And, throughout all the time, he thinks that it is connected, showing the correct in its window IP address when asked.

  However, each computer attempts to connect to it can initially.  Then, after 3-4 minutes, we get the unavailable destination host.  I get this regardless of how networking is configured (static or dynamic IP addresses).

  For example, when I start the printer first, I can ping the machine no worries

  C:\Users\Ed>ping 192.168.1.9

  192.168.1.9 ping with 32 bytes of data :
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255

  Ping statistics for 192.168.1.9:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 2ms, Maximum = 2ms, average = 2ms

  And I can access the printer from my browser.  But, wait a few minutes, do nothing, and then ping fails

  C:\Users\Ed>ping 192.168.1.9

  192.168.1.9 ping with 32 bytes of data :
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.

  Ping statistics for 192.168.1.9:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Note that the ip address assigned to the machine (and what is displayed across on the screen of the printer) is 192.168.1.9.  Ping still displays a reply from 192.168.1.10 (which is actually the IP address of the computer, I connected to via the USB connection).

  I did the normal stuff to turn off the router for 30 seconds, and it makes no difference.  What can I do to keep this work properly?

  Thanks for any help.

  Hello Nicolas and welcome on the HP forums!

  I see you have a Photosmart 5520 which has been recently replaced for a hardware problem and now the replacement seems to have problems with your wireless network. I'm sorry to hear that, but I'll certainly do my best to help

  Because the first printer did not have the same issues, it would be reasonable to assume that this printer is just being meddlesome, (most of the time, anyway ) with which I ask, have you tried to restore default network settings and then reconnect the printer to the wireless network? Otherwise, to restore the default settings of network on the printer the wrench on the top touch right, touch wireless and then scroll down to network by default. Once that is done, try to reconnect the printer to the network and see if it does the same thing.

  If this does not change the behavior of printers on the wireless network, please make sure that it is get the latest Firmware and updates.

  If that isn't also solve the problem, we will have to try a reset of the printer. If the first two suggestions don't help, please read this privacy statement for HP and I will reply with a reset of your forums Inbox.

  Let me know how things are going

• When I type in the address bar the first option on the menu drop-down is always of the form 'visit' or 'search' How do I prevent these from appearing?

  Until typing today on behalf of the part of a site or a page that is shown a list of suggestions from my previous navigation. However, since installed 43, the first option is now either visit: xxxx, which is always a site, never a page, or when the string does not have a page it goes to the research: what I just typed.

  I would like to disable this, but I am struggling to find the solution for it.

  Can someone point me in the right direction please?

  You can set browser.urlbar.unifiedcomplete to false to remove the suggestion of visit page from the drop-down list.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config