Debug/Attach for Pocket/USB computer connected any device. Did it exist in Eclipse?

Similar Questions

• Unable to connect any device bluetooth on my windows vista, go to bluetooth devices but the drop down menu will not drop

  Original title: mouse bluetooyh
  Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestions

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  f the foregoing does not fix it contact the manufacturer of the device

• My HP 3 year all-in-one C4280 shows USB not connected and "device not detected.

  Everything works OK until a few weeks ago. I uninstalled reinstalled. During the installation, there is a message' device detected"and then at the end of"device not found ".

  Also USB not connected. Switched USB to another port, nothing helps. Contacted HP.com.I running Vista Home Premium SP2. This is my last ditch attempt to resolve. Is this a problem with Vista?

  Hello

  I suggest you try to run the Microsoft Fixit from this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.

• Install an HP printer with another driver in Windows 7 for a USB cable connection

  Have an older printer and HP no longer provides a driver for it? Watch this video to help to install another driver:

  I hope this info helps!

• How do you keep the vlan1 without connecting any device?

  Hello

  We have about 500 routers (Cisco 871) connected to the VPN and the main office.

  My question is, how can I keep the vlan 1 so I might be able to access the router via the VPN, even if there is nothing to plug the router except a DSL modem into the WAN port.

  Thanks for your help and your time!

  Guillaume

  Use the command 'no autostate' on vlan1.

• Proposal to expand the scope of an analog pathway for a USB-6009 or similar device

  I'm sure that someone thought to how reduce an analog input voltage to an acceptable range for the data acquisition device that they use. I'd be interested to see what has already been written on the subject. In the meantime, I enclose an exel sheet spread detailing my own approach to this situation.

  1 SCXI chassis of NOR

  2 OPTO20

  3. Non-inverting op-amp circuit.

  Signal conditioning circuit is now quite cheap and reliable.  For me, it is better to buy something off the shelf, because in the future it will be easy for people to follow my design as well.

  Yik

• Wireless printing for laptop USB connected via the wireless office printer

  How to print from a laptop (Toshiba, Vista 32-bit) on a HPC6250 USB printer connected to a desktop computer wireless (Dell, Win 7 32/64 bit). My wireless modem is ATT U-Verse.  Printer has USB or ability of ethernet cable but not wireless. The modem is not printer ethernet connection is not viable.

  Thanks for any help.

  MRZ

  Hi BH.

  I activated the such LPD service indicated in your link, but it did not turn. When I sailed through the other answers the last one said to remove the spaces in the name of the shared printer. I did it and it seems to work.

  Thank you for helping me with this problem. It is unlikely that I would have found the link on my own.

  MRZ

• How can I disable a VM pref retroactively or by substitution of policy? (for example on stop USB auto connect)

  I'm using VMWare Workstation 7. We have a problem that I met in a large number of virtual machines is that they didn't 'Automatically connect new USB devices' disabled when their snapshots have been created. Although I can disable this preference in future from the virtual computer, disabling the preference power and take another cliché, it's a great nuisance. Is it possible that I can replace all the VMS I load and resume on my system basically by default that the preference off, regardless of the way in which an individual VM may be set, essentially the substitution of the individual preference?

  It has become very annoying. I had all these clichés with auto USB active connect. I could disable the vmware USB cross on the host completely, but I still need USB. I just don't want to connect devices automatically.

  If there is a way to replace the policy, I would also like to add something like bios.bootDelay = "5000" as a preference of substitution so that all virtual machines running snapshot would use this preference.

  Thanks for any help or idea that you can offer

  WoodyZ thanks for your help. I was able to stop the new devices to be autoconnectée. I looked in the vmware.log for some of my virtual machines. Workstation search three configuration files:

  DICT - USER default C:\Users\\AppData\Roaming\VMware\config.ini

  DICT - C:\ProgramData\VMware\VMware Workstation\config.ini default HOST

  DICT - GLOBAL SETTINGS C:\ProgramData\VMware\VMware Workstation\settings.ini

  First, I tried the HOST file. I've added:

  USB. Generic.AutoConnect = "FALSE".

  It worked, but only if the vmx file does not explicitly mention the opposite (in other words, there is no substitution). AutoConnect is by default TRUE, many vmx files won't that explicitly in the file vmx is always a good solution to stop the automatic connection of new devices. But for example I put in a file vmx usb.generic.autoconnect = "TRUE" , and even with autoconnect defined in the file HOST " false", autoconnect is always enabled when I came to the virtual machine.

  Then, I moved this line between the HOST and the GLOBAL configuration file:

  USB. Generic.AutoConnect = "FALSE".

  That seems to work as a substitution. I tried several times to confirm, the VMWare Workstation 9 closing and reopening. Whenever I took a virtual machine, although it was usb.generic.autoconnect = "TRUE" in the vmx file, the automatic connection of new devices has been disabled. Is why it seems the correct way to override and disable usb.generic.autoconnect no matter how it is defined in a vmx file is to place the preference in the GLOBAL file. Note that changing that option prevents only against the new devices being autoconnectée; in other words, it prevents the devices that do not already have a login entry automatic explicit device in the file like usb.autoConnect.device0 vmx, usb.autoConnect.device1, etc.. Also note that when a virtual machine is interrupted the USB controller "connects automatically new USB devices" in the GUI can still see the verified, but when the virtual machine is resumed, it will be disabled.

  Stop autoconnect entirely: I have experience implementing usb.autoConnect.device0 = "" global config and who can stop a device with a usb.autoConnect.device0 entry in the vmx file to be autoconnectée on the resume. " And once the virtual machine is resumed the device can still be connected manually. (Although there will be a warning on connect "the value of usb.autoConnect.device0 cannot be redefined" so maybe it's not ideal). If someone wanted to expand this idea they could add a line for each up to usb.autoConnect.deviceN with N being all that is the max. Anyone know what it is?

  If someone who reads it isn't aware of any piece of data that really makes a recommended to contain malicious software on a virtual computer then this information must be added. I don't know that if many people is aware that if your virtual machine is the active window and you plugin a key USB and VMWare tools is installed on the client, then the default player is autoconnectée at the prompt.

  I am also playing with adding other prefs from different files; like right now I've got bios.bootDelay = "5000" in my HOST file and that works for delaying my VMs to start in 5 seconds to make it a little easier access the BIOS.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• USB not connect not not on Win8.1 for DeskJet 1512

  I have a new laptop with Windows 8.1 and I bought a new HP DeskJet 1512.  I try to install the printer and the USB does not yet recognize the connection.  This is related to a printer of 15' cable.

  I tried on a Windows 7 machine and USB has been recognized as unknown.  I installed the HP driver and had something to print this machine.  A lot of hassle, but at least now I know the cable doesn't work and the driver.

  I return to the machine of 8.1 and still nothing.  There is no error in device drivers.  I manually installed the printer on LPT1 and the laptop says the drivers are there, but I'm not connected to the physical printer.

  I spent to Microsoft and makes the difficulty they have for the USB turns off not.  I can't identify what USB printer is connected to given that the cable connection is not even be recognized.

  I changed the USB Sockets and my mouse works in each of them but the printer cable is not recognized in any of them.  I am ready to return the printer if I can't even get connected.  Help please

  None of the fixes work.  I asked about the length of the cable.  I finally found something in the window stuff 8 of which 3 m is the longest to be used.  Wal-Mart has packed a 15 feet with the printer.  I'll get another cable that is less than 9 ' and try again.  I'll put something on this thread on the question of whether it works or not.  Thank you for responding.

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• NET application SAN LUN connection for a virtual computer on the network

  Hi guys

  I have a LUN of SAN NetApp ready for a virtual computer that is connected to the network.

  How can I make the virtual machine network?

  I created another vNic and added to it as a secondary virtual machine network, but is there a better way to do this?

  Should I be using the VMKernel network and choose iScsi?

  Thanks, Julien

  Hi Julien,

  Introduce the network of the virtual machine as if it were any other network. No need to have a vmkernel, unless you want to create an iSCSI data store.

  Set up your network inside the virtual machine with an IP address in the same subnet as your storage space. Try to ping of your storage space for the guest. Configure your iSCSI initiator and present your logic unit number on the virtual computer in your NetApp.

  Concerning

  Franck

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.