Debugging on the SSH tunnel

Similar Questions

• Client vSphere 5.0 works on network, but not via the SSH tunnel

  Hoping someone can help you.

  Seems that others have this problem as well.

  Can connect to the network, but not through an SSH tunnel.

  On the network, I am invited to accept/ignore a SSL certificate.  This does not happen when trying to connect remotely (via an SSH tunnel).

  During troubleshooting, I port passed almost all the ports TCP, starting w / ports 80, 443 and 902.

  Through the SSH tunnel, via a browser, I can successfully access https://127.0.0.1 (VMware server), but the client software will not complete the connection, w / error message: «...» "The client could not send a request to the server."

  Any help would be appreciated.

  Thank you.

  Managed to understand this myself, having invested in a way more time I should have.

  This announcement in the hope that it will help others.

  In your SSH client, port forward with the help of one local loop, IP OTHER THAN 127.0.0.1 (such as 127.0.0.2 for example).

  Port 127.0.0.2:443 before--> IP:443 target

  127.0.0.2:902--> target IP:902

  127.0.0.2:903--> target IP:903

• SSH Tunnel on VMWare View Client

  I use the VMWare View Client on my Mac to connect to a Windows box in the behind a network business, then SSH for some internal network UNIX boxes. I really despise having to use Putty on Windows.

  Is there anyway I can use my native terminal under OSX (iTerm) to connect to the Unix boxes into the internal network? Is there a way to make the SSH tunnel runs on the client to view?

  -David

  N °

• How to determine the cause of the ipsec tunnel fall on ASA 5510

  Is there an easy way to determine the cause of tunnel VPN ipsec l2l fall on one asa 5510? I have enabled logging, but the buffer is full so fast, I can't find something when it is 24 hours later. I'm working on obtaining a server/aggregator syslog configuration but... until it is complete I need a temporary measure. Suggestions?

  Hi Jessica.

  For the buffering limit, you can try:

  Increase the maximum buffer size.

  limit the newspapers to the class of vpn:

  Buffered Debug class vpn connection.

  On the other hand, you can try him debugs:

  Debug crypto peer peer_address condition

  debugging cry isa 128

  debugging ipsec 128 cry

  If you lose the ssh session debugging is disabled.  Finally for the vpn tunnels usually it goes down due to:

  Idle time-out

  the dead peer detection

  remove it from the other end.

  HTH.

• 3.1 proxy through ssh tunnel?

  Greetings. Anyone who has successfully used the new wifi through a ssh tunnel proxy settings? I use connectbot to ssh to my home router. I have two tunnels set up vnc to a machine and a dynamic socks tunnel. The tunnel vnc works. When I change my wifi settings to use my ssh tunnel as a proxy (localhost and port 8080), the browser constantly just times out. Here's what I know:

  1. My ssh connection to my router works.
  2. The proxy tunnel runs from a PC
  3. It is not a DNS problem

  Any ideas?

  You must use Firefox and set the proxy settings in: config. I posted on this course on XoomForums.com, I think, with instructions.

  Edit: is to configure the SOCKS proxy directly in the browser, sorry. Don't know how to do it through Android itself.

• Impossible to pass traffic through the VPN tunnel

  I have an ASA 5505 9.1 running.   I have the VPN tunnel connection, but I am not able to pass traffic. through the tunnel. Ping through the internet works fine.

  Here is my config

  LN-BLF-ASA5505 > en
  Password: *.
  ASA5505-BLF-LN # sho run
  : Saved
  :
  : Serial number: JMX1216Z0SM
  : Material: ASA5505, 256 MB RAM, 500 MHz Geode Processor
  :
  ASA 5,0000 Version 21
  !
  LN-BLF-ASA5505 hostname
  domain lopeznegrete.com
  activate the password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.116.254 255.255.255.0
  OSPF cost 10
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 50.201.218.69 255.255.255.224
  OSPF cost 10
  !
  boot system Disk0: / asa915-21 - k8.bin
  passive FTP mode
  DNS server-group DefaultDNS
  domain lopeznegrete.com
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  the LNC_Local_TX_Nets object-group network
  Description of internal networks Negrete Lopez (Texas)
  object-network 192.168.1.0 255.255.255.0
  object-network 192.168.2.0 255.255.255.0
  object-network 192.168.3.0 255.255.255.0
  object-network 192.168.4.0 255.255.255.0
  object-network 192.168.5.0 255.255.255.0
  object-network 192.168.51.0 255.255.255.0
  object-network 192.168.55.0 255.255.255.0
  object-network 192.168.52.0 255.255.255.0
  object-network 192.168.20.0 255.255.255.0
  object-network 192.168.56.0 255.255.255.0
  object-network 192.168.59.0 255.255.255.0
  object-network 10.111.14.0 255.255.255.0
  object-network 10.111.19.0 255.255.255.0
  the LNC_Blueleaf_Nets object-group network
  object-network 192.168.116.0 255.255.255.0
  access outside the permitted scope icmp any4 any4 list
  extended outdoor access allowed icmp a whole list
  outside_1_cryptomap list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
  inside_nat0_outbound list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
  LNC_BLF_HOU_VPN list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 741.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  !
  network obj_any object
  NAT dynamic interface (indoor, outdoor)
  outside access-group in external interface
  !
  router ospf 1
  255.255.255.255 network 192.168.116.254 area 0
  Journal-adj-changes
  default-information originate always
  !
  Route outside 0.0.0.0 0.0.0.0 50.201.218.94 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  AAA authentication enable LOCAL console
  Enable http server
  http 192.168.2.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 50.201.218.93
  card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
  outside_map interface card crypto outside
  Crypto ca trustpoint _SmartCallHome_ServerCA
  no use of validation
  Configure CRL
  trustpool crypto ca policy
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
  308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
  010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
  30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
  13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
  0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
  20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
  65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
  65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
  30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
  30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
  496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
  74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
  68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
  302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
  63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
  010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
  a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
  9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
  7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
  15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
  1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
  18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
  4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
  81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
  082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
  7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
  ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
  45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
  2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
  1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
  03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
  69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
  02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
  6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
  c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
  69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
  1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
  445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
  1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
  2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
  4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
  b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
  99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
  481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
  b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
  5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
  6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
  6c2527b9 deb78458 c61f381e a4c4cb66
  quit smoking
  crypto isakmp identity address
  Crypto isakmp nat-traversal 1500
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  aes-256 encryption
  sha hash
  Group 5
  life 86400
  IKEv1 crypto policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH 0.0.0.0 0.0.0.0 inside
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  SSH version 2
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  management-access inside

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  attributes of Group Policy DfltGrpPolicy
  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
  username
  username
  tunnel-group 50.201.218.93 type ipsec-l2l
  IPSec-attributes tunnel-group 50.201.218.93
  IKEv1 pre-shared-key *.
  NOCHECK Peer-id-validate
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  call-home service
  anonymous reporting remote call
  call-home
  contact-email-addr [email protected] / * /
  Profile of CiscoTAC-1
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:e519f212867755f697101394f40d9ed7
  : end
  LN-BLF-ASA5505 #.

  Assuming that you have an active IPSEC security association (i.e. "show crypto ipsec his" shows the tunnel is up), please perform a packet trace to see why it's a failure:

   packet-tracer input inside tcp 192.168.116.1 1025 192.168.1.1 80 detail

  (simulating a hypothetical customer of blue LNC tries to navigate to a hypothetical LNC TX Local site server)

• Create the Ipsec tunnel using digital certificates

  Hello

  I try to open the IPSEC tunnel between 2 3800 of Cisco routers using additional 3800 router as a CA server.

  Before that I added the CA server all go smoothly.

  Attached is my configuration, attached debug commands from the configuration of server and router CA

  It seems that the routers does not receive the certificate of the CA (R3) router because I see the certificate is awaiting status:

  #
  R3 #.
  R3 #show cryptographic pki certificate cisco talkative
  CA
  Status: available
  Version: 3
  Certificate serial number (hex): 01
  Use of certificates: Signature
  Issuer:
  CN = cisco1. Cisco.com L\ = RTP it\ = US
  Object:
  CN = cisco1. Cisco.com L\ = RTP it\ = US
  Validity date:
  start date: 10:12:13 UTC Sep 8 2013
  end date: 10:12:13 UTC Sep 7 2016
  Subject key information:
  Public key algorithm: rsaEncryption
  RSA Public Key: (512 bits)
  Signature algorithm: MD5 with RSA encryption
  Fingerprint MD5: FAB9FFF7 87B580F3 7A65627E 56A378C9
  Fingerprint SHA1: F26CD817 91F8129D A9E46671 07E26F1E 55422DCD
  X509v3 extensions:
  X509v3 Key use: 86000000
  Digital signature
  Key Cert sign
  Signature of the CRL
  X509v3 subject Key ID: 56F091F7 7016A63F B 89, 46900 B13E6719 8B0D548E
  X509v3 Basic Constraints:
  CA: TRUE
  X509v3 Authority Key ID: 56F091F7 7016A63F B 89, 46900 B13E6719 8B0D548E
  Access to information the authority:
  Related Trustpoints: cisco
  Storage: nvram:cisco1ciscoc #4CA.cer

  R3 #.

  Appreciate your support and I will send additional if necessary evidence

  TX

  Roee

  I didn't look at your configuration, but accroding to your description, it seems that you have not approved the certificate requests pending on your router CA. Here are the commands that you need:

  To view the pending requests:

  information cryptographic pki server router 'CA '.

  To grant requests pending:

  Info Server 'CA' router cryptographic pki grant all

• SSH keys are protected by a password that is supported for SSH tunnels?

  Using SQL Developer 4.1 I get an error if I try to connect a SSH Tunnel using a private key that is protected by a password.

  com.jcraft.jsch.JSchException: privatekey: aes256-cbc is not available [B@2ef5d584
    at com.jcraft.jsch.KeyPair.load(KeyPair.java:654)
    at oracle.dbtools.raptor.ssh.RaptorFileIdentity.createIdentity(RaptorFileIdentity.java:26)
    at oracle.dbtools.raptor.ssh.RaptorIdentityRepository.getRepository(RaptorIdentityRepository.java:32)
  
  

  

  I don't see anywhere to enter the password; is it supported?

  Thank you.

  As Jeff said, pass phrases are supported. While your keyfile may require a password, is not what we shifted upward.

  Instead, the problem is that the developer SQL does not support aes256-cbc. We don't specify as an algorithm of encryption supported by trying to open the SSH connection. If the key cannot be used. It is a bug, please add support for additional cryptographic algorithms beyond the default value OF THE used by ssh-keygen and other key generating default tools.

  In the meantime, if you have a control on the generation of keys, you can try using a different encryption algorithm but preserving the password requirement. The only solution would be to create the tunnel outside the SQL Developer and then manually create connections that run through the tunnel.

  -John

  SQL development team

• 'customer support files required' problem connecting using vSphere via SSH tunnel

  I am trying to connect to my ESX Server using the vSphere by tunnel via SSH client. I did in the past, but it does not work now. I am fwding ports appropriate (443, 902, 903) and have done the "hosts" file entry appropriate, as well. When I try to connect, I get the expected certificate error, and when I reject, I get a dialog box saying that I need to download the "required client supports files ', and of course I can't download them from the site vsphereclient.vmware.com while I'm in the tunnel. I'm confused about why I get this message, because I can connect to the ESX Server using the installed version of vSphere, if I directly (i.e. without a SSH tunnel).

  Any thoughts? I am in urgent need of remotely administer my VMs, any help would be most appreciated.

  It turns out that VMWare Workstation is listening on these ports, and PuTTY tunneling is silently failing... so it seems that I connect to my ESX box, but not really. Deactivation of VMware Workstation, Server and the authorization server to fix it.

• Translation in MAX problem when you configure the SSH server on a cRIO-9068

  Hello

  In my view, that there is a problem with the German translation of the remote switches max on the new cRIO-9068. When you look at the English Version, you see "Enable Secure Shell Server". In the German Version, you see "Secure Shell Server deaktivieren" which meens to disable the SSH server. The box did the same features, so after you disable SSH in can access. This it seems that it is probably just a translation problem.

  I have attached two screenshots.

  Andreas

  Thank you Andreas.

  This has already been supported in Nov 2013 and should be fixed soon.

  Marco Brauner NIG.

• How to get DEBUGGING into the command prompt

  I got to the House and I need to play with DEBUGGING in the CMD.  However, whenever I type "debug" in cmd, I get the following message:

  "A 'DEBUG' is not recognized as a command internal or external, an executable program or batch file."

  I also tried to run CMD as administrator, but that did not help.

  How to enter DEBUG?

  Hello

  By default what is Debug:

  'C:\Windows\System32\debug.exe '.

  You need an assembler.

  This question would be better asked in the MSDN Forums.

  MSDN
  http://msdn.Microsoft.com/en-us/default.aspx

  MSDN - where is the Forum for...
  http://social.msdn.Microsoft.com/forums/en-us/whatforum/threads

  MSDN - Forums
  http://social.msdn.Microsoft.com/forums/en-us/categories

  Assembly language
  http://en.Wikipedia.org/wiki/Assembly_language

  Freebyte's Guide to... Assembler free programming
  http://www.Freebyte.com/programming/assembler/

  Programming in assembler
  http://www.cs.uakron.edu/~margush/306old/index.html

  Using the Microsoft Windows Debugger (WinDbg)
  http://kipirvine.com/ASM/4th/debug/WinDbg/index.htm

  WinDbg
  http://en.Wikipedia.org/wiki/WinDbg

  Download and install the debugging tools for Windows
  http://www.Microsoft.com/whdc/devtools/debugging/default.mspx

  OllyDbg
  http://www.OllyDbg.de/

  The place on the net to learn Assembly
  http://homepage.Mac.com/randyhyde/Webster.cs.UCR.edu/index.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• What is a connection to the network tunnel adapter local?

  tunnel map

  What is a connection to the network tunnel adapter local?

  Hello, Alan Winwynn,.

  Thanks for your post.  If you have a specific problem you need covered?  In the affirmative, please let us know the issue you are facing, so that we can better help you.

  The tunnel of the card, in short, encapsulates IP6 packages with an IP4 header so that it can be sent over a network, IP4, no problem.

  See you soon

• Debugging on the device?

  Newbie here. I'm finally able to debug on a real device, 9330 which shows:

  6.0 bundle 2333 (v6.0.0.524, platform 4.4.0.438)

  I write apps targeting the 5.0 SDK. I guess from the above that the camera itself is version 6.0.0.524, is this correct?  So where can I get the specific Simulator for this?  None of the 4 last digits Curve 9330 simulators match. (I am trying to eliminate all the 'cannot find debug file"nonsense!) is there any detailed white papers on debugging on the correct device?  Also, I try to use Eclipse.

  Thanks in advance!

  All available BlackBerry smartphone simulators are available for download here: http://us.blackberry.com/developers/resources/simulators.jsp

  It may not be a release of Simulator for all versions available for download.  But we are always adding more, so you can keep an eye on this page for updates.

• Debugging on the issue of the device!

  Beginner again. My Java application with my new Plugin Eclipse 1.5.2 on win7/64 and loving debug so far and I have used a simulator 9330. I've implemented a new program feature that works fine on the Simulator, but when I Pack the app and deploy on a device 9330, it explodes with an error "index out of range". In order just to shoot this, I just use the option "Debug/Blackberry Device" and set breakpoints in the code of my program. This allows me to pass her and is very well. I found that the problem is on my side of the fence (code/design) but when I'm debugging on the device itself I do not see the values of the objects/properties, I get "

  " when I try to INSPECT an object.property.

  The big question: is it possible to debug on a device and see all the object.property values that scroll us? If yes how?

  Thanks in advance!

  Yes, it is possible but requires the files for your device BlackBerry OS .debug.  When you have started debugging you should have been prompted to download files of debugging.  Did you say yes to that?  If yes then automatically download the required files.  If you click on no, you will not be able to use debugging features.