Deeply concerned by the CRS review material.

Similar Questions

• After you install Oracle Clusterware 11 GR 1 material: could not start the crs stop

  Hello
  
  I was installing gR 11, 1 (11.1.0.6) Clusterware Oracle Enterprise Linux 5.4. Installation was not completed successfully.
  was having no problem for uqivalenece user, install rpm, both controls cluvfy verification have failed prior to installation.
  
  Something went wrong at the time of the Configuration Wizard worked and failed during the performance of the ons config.
  
  Enviromnet: Oracle Enterprise linuc 5.4 (32 bit)
  Clusterware 11 g (11.1.0.6) 1
  
  -permissions utility crs_stat
  
  Oracle@oel54ora11gr1rac1 bin] $ pwd
  /U01/CRS/Oracle/product/11.1.0/CRS/bin
  
  -r-xr-x - x 1 root 2388 3 Jul 21:33 crs_unregister oinstall
  -r-xr-x - x 1 root 2388 3 Jul 21:33 crs_stop oinstall
  -r-xr-x - x 1 root 2388 3 Jul 21:33 crs_stat oinstall
  -r-xr-x - x 1 root 2388 3 Jul 21:33 crs_start oinstall
  -r-xr-x - x 1 root 2388 3 Jul 21:33 crs_relocate oinstall
  -r-xr-x - x 1 root 2388 3 Jul 21:33 crs_register oinstall
  -r-xr-x - x 1 root 2388 3 Jul 21:33 crs_profile oinstall
  
  [oracle@oel54ora11gr1rac1 bin] $. / crs_stat t
  CRS-0202: no resource is registered.
  
  [oracle@oel54ora11gr1rac1 bin] $. / srvctl start nodeapps oel54ora11gr1rac1 - n
  PRKO-2006: invalid node name: oel54ora11gr1rac1
  
  [oracle@oel54ora11gr1rac1 ~] $. / crs_stat t
  CRS-0184: unable to communicate with the demon of the CRS.
  
  
  [oracle@oel54ora11gr1rac2 bin] $. / crs_stat t
  CRS-0184: unable to communicate with the demon of the CRS.
  
  
  
  I'm unable to debug and not a clue how to solve this problem. Please do not hesitate to share your idea or experiece to correct.
  
  My concern id how to start and stop my resources of crs.
  
  Kind regards
  Patrice
  
  Published by: SangramKeshariDash on July 4, 2010 12:35 AM

  Hello Sangram,
  According to my understanding, root.sh has not run successfully it is revealing that no resource is attached. You must run root.sh after cleaning the installation CRS has failed. Once root.sh is executed successfully, you should be able to see the resources on all nodes.

  Please check below note metalink for more details.

  239998.1 how to Clean Up after a failure 10g or Oracle 11.1 Clusterware Installation

• How to obtain the crs access ocr vote of asm 11 GR 2

  Hello
  
  11 g R2, we are placing OCR & ASM disks and no support more devices GROSS to VOTE.
  
  Here my question is that how the CRS access OCR & voting records from ASM while CRS start?.
  I hope ASM start after the start of CRS. I'm wrong? If Yes, then the CRS start ASM is downstairs and OCR & VOTING records on ASM.
  
  Also ask you all to provide the right guide so that I can learn new 11 GR 2 new features.
  
  
  Thank you very much
  
  Therese

  Hello

  There are 2 simple solutions for this:
  records of voting has.) No ASM file, but are found in the headers of records of the ASM disks. This position is directly accessible by Oracle, it is useless to start ASM to access voting records.
  (b) OCR (and ASM spfile btw) is slightly different. These are normal files in ASM and must be accessible before ASM is started. How this is done?
  Well the minimum information to start the stack and ASM are kept in a filled called CSR (Oracle repository Local) and traders (grid Plug-and - Play profile).
  With these 2 information Oracle may start ASM and then directly access OCR (and ASM Spfile).

  PS: The RSC can be maintained using ocrconfig-local

  Concerning
  Sebastian

• able to turn off the photo review?

  I just bought a DSC-HX200V and would like to be able to disable the picture review function after that I took each picture. Currently, I have to wait a few seconds after each shot until I get the shot and I'm concerned that he may make me miss shots. I also have a Panasonic FZ150 and it allows me to turn it off so I can keep shooting. Everything about the Sony is so much faster and I really like the zoom, but examination of the picture slows down the whole process. Is there a way to disable this option?

  To work around the problem, you can half press the shutter button while the image is automatically continued on the screen. In doing so, the automatic review time is cut short and the camera will immediately return to the shooting mode. This will speed up the process of shooting in succession.

  If this post answered your question, please mark "accept as a Solution.

• How to find out why the crs has dropped?

  Hi all.. the clusterware on node 2 is down. How can I know the reason so much as to why the crs is down?
  
  This information is stored in log files from the src node House 2?

  Hello

  Please check the logfile under path below. This directory contains the alert.log to the clusterware nodes file.
  $ORA_CRS_HOME/log/hostanme

  Also check the CRSD, CSSD, EVMD directories under $ORA_CRS_HOME/log/hostanme for problems with other processes.

  I hope this helps.

  Concerning
  Ludmilla amine
  http://oracleracexpert.blogspot.com
  [Install and configure ASMLib in10g | http://oracleracexpert.blogspot.com/2009/08/install-and-configure-asmlib-in-10g.html]

• Deactivation of the CRS?

  Hello
  When I run:
  crsctl disable crs
  
  and then restart all nodes in the cluster, that disable the demons of crs to all nodes or only for the one I published the order?
  
  I am new to clustering and sorry if this is a trivial question
  
  Concerning

  Hello

  This will disable the crs in the node where you launched the command. This will not have any
  effect on the rest of the nodes.

  You can see that a crsstart of flag under/etc/oracle/scls_scr //root.

  This value changes to enable disable by issuing the command crsctl disble crs.

  Kind regards
  KK

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  ITunes 12.3 running on Windows 10 and it works great. Any questions or problems with it.

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• Apple limits the number of material units that my emails can go?

  Apple has no limit on the number of material units allows the emails to go?  I don't get some of my emails on my Mac - only on my phone and Mini.  Thank you.

  N °

• Xperia z3 D6603 concern of the disparities between the glass and the frame.

  Hello

  Recently, I upgraded my ion in z3. And there is no doubt that it is an amazing phone.

  But I have a few concerns about the interstices between the glass wall and metal frame. He crosses dust and more that I am concerned about its tightness. I want to know is - it normal that all the z3 out there or is it just me? What happens if we can't manage water in this regard?

  There are a few pictures.

  

  

  

  This subject has been mentioned repeatedly, the z throughout the models up to the Z3... you must have a uniform space between panels & the bezel... This must allow a form of expansion due to temperature changes, if you think about it... If, it was packed tight, & the phone heating expansion would have nowhere to go which causes damage. Gaps don't want you have a raincoat issue is...

  Hope this helps

• How long does it take to get the app review?

  Hello BB Team.

  How long does it take to get the app review about? I sent this last February 28 with 2 majors bugs ExitToLive app.

  Thank you.

  Kind regards.

  9 days is not too bad at the moment. I got a few apps take a lot longer then than an update.

• New application on top of the CRS

  Hi all!

  I installed ATG and CRS 10.0.2 using cim tool. He set up the ATGProduction and ATGPublishing under Jboss servers.

  Now, I create a new web application on top of the CRS.

  I copied CommerceReferenceStore to ATG_HOME % store module and changed all the dependencies into manifest files for my new module (as in ATG training conferences).

  Now I'm going to deploy this module on JBoss, but have no idea how do.  I want to have the same data sources and all the features of CRS with ability to edit

  It is in the scope of the new module.

  Could you please provide me steps how to operate the new module on top of the CRS.

  Thank you!

  Hello

  You can follow this post that explains exactly what you want (look at the first response).

  ATG CRS NO

  It will be useful.

  Good bye.

• Can someone tell me where are the configuration files managed by the CRS resources?

  Hello

  I'm new to SIR and I am curious about certain topics, CRS.

  Could someone explain me where I find the configuration of the resources held by the CRS?  These resources I see later with the crs_stat command?

  I know how stat them (crs_stat) I know how to handle (for ex: crs_relocate) but I guess there is also configuration files that store settings for example which define nodes (target) where run them etc..

  Thank you.

  m.

  As FreddieEssex said, this info is in the OCR. It's a binary file, not a traditional text-based configuration file.

  Normally, you use crsctl or srvctl utility to change the configuration of the resource.

  You can also use the utility GRID_HOME/bin/ocrdump $ to clear the content of OCR in a file > but even in this case, some of the information is still in form binary (a lot of hexadecimal characters).

  HTH,

  Brian

• How do I know how much the number of materialized view columns

  How do I know how much the number of materialized view columns

  Thank you

  Gopal

  Best to include the owner too if you use all_tab_columns

  Select count (*)

  from all_tab_columns

  where owner = "."

  and table_name = "."