default customer problems

Similar Questions

• Copy the user default profile problem profile

  I am trying to copy a user profile to the default profile for all users who log on will have the same parameters as the user.
  I used the built in tool copy of profile under System Properties > advanced > settings...
  For all copies fine except some program registry keys still point to the original profile rather than the newly created on logon profile.  This seems to work without problems under XP but in Vista it fails every time.
  Is there a new way to manage default profiles, that I don't know?

  Thank you

  Kleenex82,
  Thank you for visiting the Microsoft Answers community forum.

  CopyProfile Specifies if the default user usually stored under C:\Users\Default profile is replaced with the profile of the currently logged in user. You can use this parameter to copy the settings of user profile in all user accounts created on the destination computer.

  Use the following steps to define custom user profiles:

  Connect you as the user whose profile you can customize (for example, the built-in Administrator account).

  Customize the settings of the user profile of your choice.

  Set the CopyProfile to true.

  Run the command sysprep / generalize to copy the custom default user profile user profile settings.

  All subsequent user accounts created will have the customizations that you set. For more information about Sysprep, see the Sysprep technical reference in the Kit OPK (Windows OPK) user's Guide.

  This setting does not copy the profile of the built-in Administrator, unless the built-in administrator is the currently logged-on user.

  Let us know if this was helpful, or if you need assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Default dictionary problem

  I used Firefox for many years, but I still have a problem with the dictionary.
  I'm from the Italy, and I use Firefox Italian. If I install English Dictionary, it becomes the default dictionary... and I can't return this setting (I must always select the Italian dictionary when I type).
  The only way is to uninstall the English Dictionary.
  Could you make an option to select the default dictionary?

  Have you tried to change the pref spellchecker.dictionary to 'it '?

• Default image problem

  I have a problem with my images on Windows Movie Maker 2.6 and I was wondering if there was a way to get back all my photos in default durations. Like saying, you set a default time like 10 seconds, and your photos are all in 5 seconds. Is there an easier way to change all the images in my times of delay?

  I have a problem with my images on Windows Movie Maker 2.6 and I was wondering if there was a way to get back all my photos in default durations. Like saying, you set a default time like 10 seconds, and your photos are all in 5 seconds. Is there an easier way to change all the images in my times of delay?

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Default AutoPlay problem

  I seem to have a problem with my Win 7 AutoPlay feature. When I go to the program "Choose a default value", there is only one or no programs listed. How can I call up the other (good) program to use?

  Kind regards... John

  Thank you, Ramesh. Your REG file was well worked and restored the additional choices. I have a question however.  If the program I want to use is not one of the choices, how can I add it to the list?

  You can use the 'default Programs editor' (third-party tool) to add / change AutoPlay entries.

  Default Programs editor:

  http://defaultprogramseditor.com/#features

  http://www.Winhelponline.com/blog/default-Programs-editor-file-association-editor-for-Windows-7-and-Vista/

• Add the Menu item to default custom Blackberry file browser

  Hello

  I try to add the Menu item by default Blackberry file browser.

  I want to add the menu item 'PRINT' files. It is when I browse through the media-> Explore-> photo, we get a list of images and when clicked on the Menu. I expect the element menu to print it.

  I use ApplicationMenuItemRepository to achieve this. And the documentation says.

  MENUITEM_FILE_EXPLORER
          ApplicationMenuIteminstances registered with this ID appear when the file Explorer application is running.

  MENUITEM_FILE_EXPLORER_BROWSE
          ApplicationMenuIteminstances registered with this ID appear when a user uses the Windows Explorer application to browse files and folders.

  MENUITEM_FILE_EXPLORER_ITEM
          ApplicationMenuIteminstances registered with this ID appear when a user uses the file Explorer application to open a file.

  Whence this Explorer of files mentioned in the CIHI means. I added the Menu item in the browser, and I could see the IMPRESSION here. But I don't know where this IMPRESSION would be visible IF we add the menu item to one of them.

  Thanks in advance.

  Provision ApplicationDescriptor solved my problem.

• Default resolution problem (windows 7)

  Since I tried to play Metro 2033 (including my resolution 1024 x 768) on my pc, my resolution is reset to 1024 x 768 at startup.  My display's native resolution is 1080 p I don't know how to change it back, but just, it is up to every time I start up and disorganises my office.  Why is he returning there at - it a resolution setting by default, how can I fix?

  Hello

  Try to update the drivers to check if the problem persists.

  Follow the steps below to update the graphics device manager card readers:

  a. press the Windows key + R, type devmgmt.msc.

  b. develop graphics cards.

  c. click Properties, click the driver tab.

  d. button click on update drivers.

  e. click on the OK button.

  See also section below.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  If you have additional questions, feel free to post. We will be happy to help you.

• Ringtones blackBerry Smartphones Custom problem

  I have a Blackberry Curve 8310 and I put a few custom there ringtones. The ringtones are not really too long either, the longest is probabley as 29 seconds long. I have a default ringtone for my calls and sms. but the custom ringtones that I put for my contacts will not play when they send me an sms, or when they call. How can I fix?

  Thank you very much

  Hello and welcome on the BlackBerry Forums

• my default printer problems

  I had changed my printer (twice) in the last two days because I can't seem to set as the default printer. I thought it was a problem with the printer originally so I bought another and encounter the same problem. When I try to set it as the default printer, I get the message. ' Operation could not be completed error 0 X 00000709. Other messages that I get when I try to solve the problem are "The Active Directory Domain Services is currently unavailable." I tried to set as default through Notepad, but which does not and in outilsOutlook when I hover over the printer button it say my old printer (I deleted and all software) HP Officejet 63000 is the default value. Can anyone help

  Hello

  Thanks for posting in the Microsoft Community forums.

  Please see the instructions in the link that the steps have resolved the issue in community with an Internet connection. The measures are applicable to Windows Vista and 7.

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/57d9e420-0ea2-4561-a7cc-2fd33da792ae

  Note 1: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  Please let know us if you need help and we will be happy to help you further.

• EXE by default association problem windows7

  Not so smart brother somehow changed the association of all the executable files (.exe) for Windows Media Center, and the only program I can open is now Google Chrome.  How can I change the association to windows Explorer.  Moreover, not even a command promp opens.  The operating system is Windows 7 Home Premium.  Any help would be greatly appreciated.

  Hello Frito182,

  Thanks for posting on the Microsoft answers Forum.

  In addition to what said Amrita, you can reset file associations.

  Reset file associations should help with your problem.
  Open the control panel (all items view) and click the default programs icon.
  Click set your default programs .
  In the left column, select the program (highlighted) a list that you want to change the associations is default for file.

  To set all the Associations by default for the program-
  NOTE: This will allow to associate the selected program by default used by Windows 7 to open all types of files and protocols it can open.

  Click set this program as default.
  Click the Save button to apply.

  If please reply back and let us know if this helped with your question, because it can benefit other people with the same problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Default printer problems

  Windows 7 32 bit
  HP OfficeJet 8500

  Having problems affecting this printer by default. It is the only device listed under "Devices and printers", yet when I right click on the device and 'set as default' nothing happens.

  I tried to uninstall and reinstall the printer without success.

  Also, I tried:

  The is simple:
  Go to HKCU\Software\Microsoft\Wi Please HELP!

  Please browse the WEB to

  http://WWW8.HP.com/us/en/support-drivers.html

  Carefully check the list of printers. Note that there are several in the series 8500 JO. Choose the appropriate link.

  On the next page, make sure to select the right OS and the number of bits. Note that there is no updartes firmware for this printer. Download updates of the firmware and the appropriate printer driver.

  Unplug the printer from the computer. Remove the printer drivers.

  Turns off the computer down to. Restart the computer.

  Plug the comouter on the computer.

  Install the updates of the firmware th according to the instructions. Unplug the printer.

  Install the driver according to the instructions. Do not connect the printer to the computer until the instructions tell you to.

  Note: Read all the instructions provided on the site or provided with the download. Search the readme, FAQ files or similar. If the instructions of any HP differ from what I suggested, follow the instructions from HP.

  Tom Ferguson

• Configuration of Apache by default port problem.

  Hi Experts,

  Today, I met a working port of apache configuration.

  My scenario:

  I have a domain with a managed server (both on the same machine) and also, I have configured apache server using code below,

  < location / >

  SetHandler weblogic-Manager

  WebLogicHost 192.0.0.1

  7005 WeblogicPort
  

  < / location >

  The application runs on port 80 by default. Thus, when the user access to the DNS means www.support.com (example) means that it redirected to the 192.0.0.1. Then user acesss the homepage of the

  request. So far no problem.

  My requirement is, if the user accessing the DNS also redirected www.support1.com(another one) to the 192.0.0.1 and also access home page of the application itself. But what I want is, need for the user to access the specific page (example: billing page) in the application, not the home page.

  I don't want to set up separate port (apache level) and separate the IP (DNS level) for the www.support1.com.

  I tried to write the virtual host inside of this I used the name of the server, but it does not work.

  Can I write the IF ELSE condition in the httpd.conf file as if your access from the ww.support.com go to this URL to go to that URL (billing page)
  

  Please share your expert suggestions.

  Kind regards

  Simo.

  Hello

  Try to change the rule for this:

  RewriteRule ^ / $ /faces/NewCustRegisteration.jspx [R, L]

  Your original rule was rewriting / / also, so no rewrite real does.

• OME 1.3.0 default customer group

  1. is it possible to get a device discovered in the default client group. the Group of customers does not appear when I try to add to the existing client group where everything is already stored. I have to create a new group to record individual research of a device and still can not move or add to the default group.

  2 think that I might have to create a new range of discovery with just the ip addresses of the missing devices may take care of this problem. wrong post my results later.

  a solution for the 1. above would be better than solution 2.  as I don't know what devices have been left out because she was off at the time of the discovery.

  Thanks for any help that anyone can give.

  Hello

  When you discover customers i.e computers laptops and workstations, they will under clients by default. You can not move any other device to the default groups.

• Makes to default (RAM problem) for Windows 10

  I had problems with makes it default since the update to Windows 10 with the following error message:

  After effects error: unable to allocate enough memory to render the current image (1280 x 720 @ 16bpc). Decrease memory for rendering of this framework requirements, or install more RAM. (12805) for more information, see www.adobe.com/go/learn_ae_mem (7: 66) After Effects error: not enough memory Timewarp. (4) (25: 60)

  He has no less mid-term to make (at 01:58:22 04:10) after 2 h 57 min. Also my project is 8bpc set in the project settings so why the error says his 16bpc rendering (is this due to an effect)?

  Using the version of EI:

  AE CC2015.2 Version 13.7.1.6 (I do not use multiprocessing, in fact I don't see even as an option in the Menu preferred?)

  Plugins:

  Magic Bullet Suite (12.1.4)

  Rendering parameters:

  MOV Quicktime H264 with Audio (AAC), 100% quality, 8bpc

  Specifications of the PC:

  16 GB of RAM, Intel i7-4790, NVIDIA GeForce 720

  Running Windows 10 (1511) 64-bit with any questions, or running Windows 8.1 (6.3 Build 9600) 64-bit without problems.

  QuickTime:

  Version 7.7.9

  I have no other applications running while using the AE and rendering. Rendering will end if I set the quality up to 70%, which seemed strange to me because I would have assumed that AE needed to store more information on each image (and images on each side) in order to make the compression. I drove back to 8.1 Win and using the same make settings, him finished in 2:32 with no error. I've also been able to release no compressed Animation QuickTime in 16bpc on 8.1 Win I can't do on 10 to win.

  The film is loaded in AE as sequences of images (uncompressed), with a DOF, motion blur, color correct pass - there is a lot of stuff happening on each image, but his uniform in the project. I mean, he didn't suddenly to a framework intensive and abandoned, it not there no difference between managers, that he had failed and the rest of the project. There is nothing he should not be able to manage (and it is worked on Win 8.1).

  I'm just confused as to why it would be rendered OK on Win 8.1 but so sluggish and fail on 10 to win? And what can be a solution? Looks like a problem with the RAM not be reconstituted?

  The first thing I want to say is that he is a very good question. Thank you.

  I'm sure that your AE is updated but make sure. I'm on a Mac so right now our version numbers are different. Because the full architecture is being rebuilt, there is no Multi treatment in 2015 CC.

  Make sure that the Magic Bullet is up-to-date. As good that I have not updated my Magic Bullet for a long time because they have a different workflow for the color adjustment.

  The problem I see is with the rendering parameters. QuickTime has completely abandoned their support for H.264 in a Quicktime container. He has never worked well, and when he did he was unreliable and slow to render as a delivery format. I would never use this format. If you use Adobe Media Encoder to render your h.264 as a MP4 using one of the predefined default settings then that is the way to go. If you make a computer directly in the SOUL, than rendering through AE output module because AE are running in the background. If you have used the Ray-tracing and have a NVIDIA / map CUDA compatible then the SOUL will not use your GPU for rendering and she will be forever and may not work at all.

  I guess that's your pass rendering because you choose a MPEG format which is not really suitable for mounting more far and re - compress. My recommendation would be first purge the cache of your disk and the image in AE and will then return in a production master format adapted from the landmark Render, and then encode your H.264 in the SOUL. Several times, it will be faster that make a model directly in the SOUL. By far the shortest makes time in him come from SOUL of a master of production without loss of quality. Most of the time I just send makes the TEA directly from the AE, and then I continue to work on other shots because I can't afford to wait. It is the most effective for me, but if the project is under a tight delivery deadline I'll usually make a mastery of the production of EI and then compress it in SOUL for delivery.

  If you get the error, there could be another thing that past can be fixed by changing the cache settings in the Panel preferences Secret. You access this Panel by holding down the SHIFT key when you open Preferences > General. Disable the Cache layer and serve the latest images.

  

• import custom problem

  Hello!
  Is there anyone experiencing this problem?

  I try to import a clothing custom, following all the instructions provided by Adobe (and Mixamo too)
  but I feel something strange.

  I did a screen capture as soon as I clicked on the fabric imported (to easily show you the stitch)

  

  and soon after a screenshot with textures "supposed to be responsible" and normal (which work fine in all types of 3d software im using)
  It is supposed to be all orange, with a black belt, but here is what I get

  

  What I am doing wrong?

  I am running OSX 10.10.3

  2.3 GHz Intel core i5

  8 GB ddr3 1333 mhz ram

  Intel hd 3000 512 mb graphics card

  Thank you!

  Looks like it's probably a problem with the input color mask.  Fuse using a "diffuse" or color does the same way as other software because we have the procedural texture inside the software.  Your color for fuse mask entry should be only basically a mask ID that indicates the fuse is which region elements.  Each region should be painted with one of the 8 combinations available color 'pure '.  Each color represents a region of customization of the fuse that you can then apply a material in the fuse in.  If you want to have any transparency you can also add that in the alpha channel of a color mask.  Here is an example of torn trousers.