Default external FW disk... strange behavior

Similar Questions

• Strange behavior of PE10 do not ask for disks 2 and 3.

  My computer complies with the system requirements and I have a brand new PE10 "closed". The box has three discs. I installed disc1 and serial number and told me not to install the other two disks. Installation was surprisingly closed. There is a shortcut on the desktop PE10 and PE10 is located in the Program Files folder. I can open PE10 with the shortcut on the desktop and everything seems to be there.

  I felt very uncomfortable so I uninstalled disc1 and reinstalled with the same results. I used PE4 for many years, so I'm used to Adobe Photoshop Elements. I have dozens of files in MY PICTURES, I want to implement PE10 but I didn't in case something is wrong.

  Can someone explain why, I was told not to install dics 2 and 3?  Are they necessary?

  cogleylane

  From: 99jon

  Sent: Thursday, April 12, 2012 14:23

  To: cogleylane

  Re: Strange behavior of PE10 asking only not for disks 2 and 3.

  Re: Strange behavior of PE10 asking only not for disks 2 and 3.

  created by 99jon in Photoshop Elements - discover complete discussion

• Strange behavior USB Flash Drive Satellite A100-626

  Hello

  I did install Windows Vista Business Edition on my Satellite A100-626 (PSAA9) following the instructions provided in the Web page of drivers.

  So far, everything works as expected, except for one little (or no) question.

  When I ask Vista to 'Remove hardware safely' my USB Flash drive, a Popup appears telling me to remove it. So far, so good :D

  The only thing is that the flash player is not put out as could be expected and and yellow question mark appears in Device Manager.

  Opening of the question mark can read what follows:

  "Windows cannot use this hardware device because it has been developed to remove safely, but it has not been removed from the computer. (Code 47) To resolve this issue, disconnect the device from your computer and plug it in again. »

  Following the instructions above, the light turns off, lol...

  Someone else met this strange behavior? If so, any solution?

  I tried a few USB flashes that run well on XP and they both do the same thing.

  Thank you, Nuno!

  Hi Nuno

  It's very strange. I have the Satellite A100-504 (comes with Windows XP Home edition). Last week, I installed Vista and all the stuff followed Toshiba document instructions facilities. I use the mouse wireless, external HDD USB web cam. With the help of these external devices together I never noticed a similar behavior.

  You have the same situation with all the USB ports?

• Strange behavior of audio subsystem after update Dev Alpha 10 to 10.0.9.388

  Hello world!

  Has anyone noticed a strange behavior of the behavior of 10.0.9.388 audio subsystem firmware. Recently, after firmware update Dev Alpha 10 to 10.0.9.388 subsystem audio misbehavies in the following way:

  (1) if the external headphones/speakers connected to the audio line-out looks to be preprocessed by low-pass filter and surround effect. The device reported by AudioManager is/dev/snd/pcmPrefferedp. Would it be a bug in formware and re-routing audio internal speaker to the line-out socket did not exclude specific pre-treatment?

  (2) on the previous firmwares if audio goes out of the internal speaker and then the helmet is connected to Jack line out change of itinerary was seemlesly happening and he kept playing with headphones without additional measures in the application. Now, peripheral audio is not consume audio samples and so crashes until it is closed and reopened.

  On the previous firmwares were not all the problems of this kind. Would be - what a few unlucky flashing firmware try (if it is still possible) or bug of 10.0.9.388.

  It will be good to hear comments & thoughts about these questions.

  Best regards

  Dmitry.

  I suggest to create two entries Issue Tracker: https://www.blackberry.com/jira

• Bar chart stacked - strange behavior on display null values

  Hi all

  I'm trying to graph a county of the end dates of the activities over several years by months grouped by project.

  The problem I have is that there is a gap of 3 months where none of the activities that I am tracking complete. The default value for the stacked bar chart is to ignore the columns with no data (in my case it October-December 2015).

  To view these any given month I went to properties graphic and ticked the box "Include Null values. At this point, I get a very strange behavior. Once this option is selected, the legend explodes, showing each project in the database regardless if it meets my criteria for analysis.

  Has anyone another considering that happen? I'm doing something wrong?

  If it's important I'm in the OBI 11.1.1.7.150120

  Thank you for your help,

  Kevin Wolfe

  
  

  Hello

  You have a filter on the list of projects you want to see?

  Based on the way you describe your analysis I guess you don't have any what filter on the list of projects, but some of the filters on the other dimensions/attributes and these filters were limiting the list of projects.

  If this is the case then what you see is not a weird behavior, but everything you've asked your analysis.

  "Include null values" is not limited to the time dimension, it fits any dimension of your analysis, so no filter on projects = all projects.

• Refresh the strange behavior of factor ahead

  Hello world

  I had the strange behavior of refreshment early feature.

  Here is my configuration:

  <> cache-config

  < default >

  POF < serializer > < / serializer >

  < system-property="tangosol.coherence.socketprovider"/ socket-supplier >

  < / default >

  < cache-system-mapping >

  <>cache-mapping

  < name of cache - > sample < / cache-name >

  < scheme name > expand-nearly-distributed < / system-name >

  < / cache-mapping >

  < / cache-system-mapping >

  <>- cached patterns

  
  

  < about plan >

  < scheme name > expand-nearly-distributed < / system-name >

  < avant-regime >

  < local plan >

  < high-units > 20000 < / high units >

  < expiry time > 10 s < / timeout >

  < / local plan >

  < / avant-regime >

  < back-plan >

  < distributed plan >

  distributed < system-Ref > < / plan-ref >

  < / distributed plan >

  < / back-plan >

  < invalidation strategy > all < / invalidation strategy >

  < / near-plan >

  < distributed plan >

  distributed < scheme name > < / system-name >

  < service name > - sample < / service-name >

  thread < number > 20 < / thread count >

  < support-map-plan >

  < reading-writing-support-map-plan >

  < internal-cache-system >

  < local plan >

  < expiry time > 10 s < / timeout >

  < / local plan >

  < / internal-cache-system >

  < dumps-plan >

  schema < class >

  < class name - >

  com.sample.CustomCacheStore

  < / class name >

  < / class-system >

  < / dumps-plan >

  < refreshment-ahead-factor > 0,5 < / refresh-ahead-factor >

  < / reading-writing-support-map-plan >

  < / support-map-plan >

  < autostart > true < / autostart >

  < / distributed plan >

  < / cache-plans >

  < / cache-config >

  and if I ask that my service with a period of 6 s (10 s * 0.5) seconds, all are very good. I have no delay in response (with the exception of the first), but if I change such as a period of 3 seconds, then I start getting times every 10 seconds. I have no idea why this is happening. It seems that if I ask my service before the predictable period (from 5 to 10 seconds) asynchronous loading can't even though after that I ask once again. Y at - it explanation of it and how do I get around this behavior?

  Thank you

  The problem has been resolved. The reason why I have such a situation, it is that this front regime didn't notify the regime back because of the same expiration date. In a few words, to use the features of refreshment in advance with near cache you will need to set the expiration time of avant-regime equal to the soft-expiry time (in this case, it will be 10 s * 0.5).

• Can help or explain this strange behavior?

  Hi guys,.

  I'm just starting to write a script to extract our VM guest IP information before updates.

  I ran into a strange error that I can't move, or explain, and I was wondering if someone could help me.

  This script (pass vmhost objects to him) translates to display the info of the physical NIC (device and mac), but no info vnic (unit only). If I change the order arounf for the vnic info is displayed first, then the info vnic deisplays correctly (device, IP address and mask), but the bear info is not (only peripheral poster, not mac).

  Begin

  {}

  Process of

  {

  If

  ($_) {

  $_ . Name

  $temp = $_ | get-opinion

  Write-Host " "

  Write-Host "Physical NIC"

  $temp. Config.Network.Pnic | Select device, mac

  Write-Host " "

  write-host "E-cards"

  $temp . Config.Network.Vnic | , Select peripheral, {$_. spec.ip.ipaddress}, {$_ }. spec.IP.SubnetMask}

  Write-Host " "

  }

  }

  I know there are a lot of scripts that do this, so please don't point me to them. I am trying to learn. I know also, aspect is ropey, I'll sort that later. Now, I'm only after the reason for the strange behavior.

  Thanks in advance

  Phil

  You confuse output formatter by sending different types of objects.

  The trainer focuses on the first object to determine how to format for the output of the screen.

  Try adding the out-default cmdlet after both of the Select-Object cmdlets you have in the service.

  $temp.Config.Network.Pnic | select Device, mac | Out-Default

  and

  $temp.Config.Network.Vnic | Select peripheral, {$_.spec.ip.ipaddress}, {$_.spec.ip.subnetmask} | Out-Default

  The out-default cmdlet actually kind of redefines output formatter.

• Strange behavior declaring after unloading/loading

  I noticed a strange behavior when after that all documents are closed, but with the AI always open, and then open a document my plugin rebooted ok but all the authors notifications no longer works. I HAVE to close and reopen the document, the authors of notifications can work.

  How the registrant can stop working? I thought that once you have added the authors of notifications, they have to stay even after many plugin charge and discharge right?

  Care experts to explain?

  Thank you very much

  I assume you are using a plugin that is not loaded at all times? Ours did this, so I don't know if this is normal behavior; You may have to re-setup your notifiers everytime that you are responsible, not only the first time. It's been a while since we had a plugin that behaved that way, although (and I know, that's as well as 'default'). You could try just blocking plugin so it isn't unload, see if that solves it (I forgot how, but if you are looking for you should find a wire or three on the way back).

• Strange behavior of the Animation

  Hello guys.

  I'm fading in the textArea 3 and 3 labels State 'default' to 'addRecommend' and fade out the text box and labels seeOther State to addREcommend. The defautl-> addRecommend works very well. However, addRecommend-> seeOther

  show "a text box" (which is not included in State seeOther) and kill my "add to database button" (which is in a State of seeOther).

  If I delete detailText and details of my transition melted, everything will work, but I need to have my detailText and fade out too much in detail. If I do not explain my question, please copy my code and paste it into your flex. I spent 5 hours to debug it but no luck. I have really really grateful if someone could help me.

  < fx:Script >

  <! [CDATA]

  protected function add_clickHandler(event:MouseEvent):void

  {

  currentState = "addRecommend";

  / / addRecommendMove.play ();

  }

  protected function seeOther_clickHandler(event:MouseEvent):void

  {

  currentState = "seeOther."

  }

  ]]>

  < / fx:Script >

  < s: states >

  < name s: State = "default" / >

  < s: State name = "addRecommend" / >

  < s: State name = "seeOther" / >

  < / s: states >

  < s:transitions >

  < s:Transition toState = "addRecommend" >

  < s:Sequence >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Resize target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < s:Parallel >

  < s:AddAction target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < s:Transition toState = "seeOther" >

  < s:Sequence >

  < s:Parallel >

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < / s:transitions >

  < s:Label color = "#000000".

  x="10"

  y="60"

  ID = "YourName".

  fontSize = "13".

  fontFamily = 'arial '.

  text = "Your name" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "75" width = "50%" paddingLeft = "10" id = "userName" includeIn = "addRecommend" / >

  < s:Label color = "#000000".

  y="110"

  x="10"

  fontSize = "13".

  fontFamily = 'arial '.

  ID = "recommendCityLabel".

  text = "Recommended City" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "125" id = "recommendCity" width = "85%" includeIn = "addRecommend" / >

  < s:Label color = "#000000" x = "10" y = "155".

  fontSize = "13".

  ID = "detailText" <!-if I add this label to my transition melted, the strange behavior->

  text = "you can add details!

  fontFamily = 'arial '.

  includeIn = "addRecommend" / >

  < s:TextArea = "180".

  x = "10".

  paddingLeft = "10".

  ID = "detail" <! - if I add this textArea for my transition melted, the strange behavior too - >

  Width = "90%" height = "160" includeIn = "addRecommend" / >

  < s:Button id = 'Add '.

  x="10"

  y="60"

  y.addRecommend = "350"

  width = "210".

  width.addRecommend = "150"

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "recommend your favorite places.

  label = "add your recommendation."

  label.addRecommend = "Add to database"

  Click = "add_clickHandler (Event)" "

  />

  < s:Button id = "seeOthers".

  y="105"

  x="10"

  y.addRecommend = "400"

  width = "220".

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "see recommendation of others.

  label = "see other recommendations.

  Click = "seeOther_clickHandler (event)" / >

  Hello

  I had a look at these, I think that the provision itself was a bit wonky, I enclose the code in a link like this forum tends to eat code that doesn't help when you're trying to look at the code.

  http://gumbo.flashhub.NET/Jerry/ source included
  You have the basics of work, but to avoid confusion in the States and the code, I suggest you try to group your objects to display relevant to the effects of transition, it is easier to control and maintain.
  On a side note use you designview in the ide to see how States will look, this tool will be of great help while you learn, ignore anyone who tells you not to use designview, it is a page layout tool and works well for these types of tasks.
  David.

• Drive light external HARD disk Warrior exploded

  I use DiskWarrior do a reconstruction of the hard drive to save the files, if possible. Hard drive does not appear on the desktop, which had been seen as a USB device on system information. During the reconstruction, the Seagate external HARD disk light exploded and is no longer visible to the Profiler system as a USB device. Should I cancel the reconstruction? Should I try disk referee to 'stabilize' the disc and run Disk Warrior?

  Can you describe the real problem which caused you to run DiskWarrior "to save the files?  Who can provide a clue about your current situation.

  If DiskWarrior' forever,' you have to cancel rebuild it later.  How long it has beed running?  It may take time, if repairs are done by DiskWarrior.

  DiskWarrior works repairing data directory player (which defines where the files are stored).  There are other types of utilities who hunt the disc for actual data.  For example

  https://www.prosofteng.com/data-rescue-recovery-software/

• Firefox crashes (and other strange behaviors) due to gifs

  From a recent update Firefox displayed a strange behavior that surrounds the gifs. Sometimes, after viewing pages with a large number of gifs or several very large gifs, Firefox will do things like not animate gifs, or even do not load the images at all, an and will not stop until I have restart Firefox. What's more concerning is that sometimes in these situations, Firefox will simply hang and stop responding, forcing me to kill the process.
  This page shows the behavior of hanging fairly regularly: http://www.neogaf.com/forum/showthread.php?t=1021843 & page = 21
  It seems more likely to happen when I scroll the page quickly. The behavior persists when I restart Firefox mode without failure.

  39 of Firefox seems to have solved the problem.

• How can I backup iphone external HARD disk?

  How can I backup iphone of my windows 10 external HARD disk?

  Is not possible. An iPhone can only be saved by using iTunes or iCloud.

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Photos can work using just an external HARD disk and leave my only intern?

  Hello

  I am using v1.5 Photos. On my Macbook HARD internal disk fills up very quickly. Fortunately, I have a nice external 1 TB drive and I would like to:

  (1) move all my photos on the external drive and direct Photos program so search the folder on the external HARD drive to find all photos.

  (2) when I import pictures from my camera in the future, that the Mac them automatically in the folder of photos on the external HARD disk and not keep fill the space limited on my Mac small disk internal.

  Is this possible? I remember that I was able to do it with iTunes years when I used a Powermac with 4 x internal HDD of various sizes. iTunes has been able to see the music on each disk files and present them to me as a single list of iTunes.

  I'm not interested in using iCloud at all, I have everything on HARD drive and memory sticks and I am satisfied that, as it provides all the storage I need and I only use a computer for my work.

  Thanks a lot for your help.

  Yes, it is possible to keep the pictures library on an external drive. Make sure that the unit is running at the launch of photos from your Mac.

  See this discussion for detailed instructions of another user.

  How can I move Photos on external hard drive?

• 250 GB external HARD disk drivers for Windows 98 SE

  Hello

  Is it possible to download the drivers for windows 98 SE? the external HARD disk works fine on Windows XP Pro SP2, but windows 98 did not have the drivers for it.

  A Direct download link would be appreciated.

  Have you had special XP drivers for this unit or just plug into the USB port?
  I put t know if it will help but check this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Here, please select Options for drive external HARD drive external HARD - Win98

  Also check this:
  http://support.Microsoft.com/kb/258773/en-us/