default labels first pro 5.5 colors

Similar Questions

• Why my reading plays at double speed by default in first pro CC2015

  While I am doing a project at PP, my reading screen will double speed, even with manual slow keys, it is not smooth. I tried to reinstall PP nothing helps. I also had remote Adobe support in my PC only for them to fail and finish the session abruptly. Help, please

  ch05en,

  Yes, it could be a video codec problem, but have you checked your audio settings in first? There seems to be a problem with the first audio playback at speeds appropriate when these are not set correctly, also, there is no rub smooth as well.

  I don't know if you have an ASIO driver or what, but it's something to look at. Mine did exactly the thing until I put it for the correct driver according to the audio hardware preferences.

  Just a thought.

• I need help on the colors in first pro.

  I need help on the color in general information.

  http://www.YouTube.com/watch?v=vLEGtzyZ0Fs

  I made this video in AfterEffects and exported in color 16-bit png sequence.

  I then imported in first pro and added audio and some titles at the end.

  Now, I want to do is have a perfect version that I could watch on my pc.

  I used Mp4 h 264 to compress the video and it is on youtube.

  I think that this compressor support only 8-bit color because there are bands in the sky.

  Now, I have to make a version which is of very high quality that I can watch on my pc... I tried several codecs and it does not work.

  The problem is so long that there something on top of the png sequence in premirere pro as an image or something, it's like

  the displacement of the image in 8-bit color mode.

  It's using Avi Lagarith lossless codec

  Before there is a picture on top...

  

  Just after that, the image appears... As you can the there are a few bands on this image.

  I know it's subtle, but I want to know why this is happening.

  

  Is there something I'm missing... I took much too long to try to fix this.

  I ended up using the Quicktime animation codec for my video. The problem does not occur with this one, and I can't see any decline in the quality of the image.

  Now, I have a file compressed at low cost for online viewing and a huge file that I can watch on my computer.

  On a side note, can you guess how many hours it took for my computer make the png of this video sequence... 12 HOURS!

  Should I get a new computer...

  Thanks for the reply!

• Default label colors?

  Hello

  I recently changed my colors to default on the front label while working on a project with other editors.

  I finished on the project, and I would now like to change the default label colors. But it doesn't seem to be a feature of handing over. Nobody knows what are the default names and hexadecimal codes?

  Thank you!

  Hello

  Thank you for contacting the forums, I have hexadecimal color codes. Please try and check whether or not they work.

  Violet, Iris, Caribbean, lavender, Cerulean, forest, Rose, mango

  A690E0, 729ACC, 29 D 698, E384E3, 2FBFDE, B 51, 858, F76FA4, EDEB3B.

  Please update once that these codes work.

  Thank you

  Vinay

• Color picker will appear when you move the first Pro CC

  Anyone else having this problem...

  Sometimes when I leave on Adobe Premiere Pro CC, the color picker appears.  After that I closed the color picker, first farm in unexpected ways as usual, but sometimes I have to close the Color Picker 3 times before it goes away.

  It is not always do and I can't understand what triggers it (besides the creation of quitting).

  I run on Windows 8.  First Pro CC v7.0.1 (105).  I only started noticing in this first Pro CC was last updated.

  Thank you

  This bug has landed on my plate recently for investigation, and today I managed to nail a case simple repro: in AE, copy one or more solids or adjustment layers to the Clipboard (or a model containing materials solid/AdjLayers), then right-click in the project Panel of the body, chronology, or the effect controls panel. I get one instance of the color picker for each solid copied to the Clipboard.

  A workaround for this repro case is something else that a solid layer or adjustment copy to the Clipboard before right-clicking in the BODY.

  Edited to add: I meet the color picker only the first time I did a right click in the body after setting focus on the application. Also, once a solid AE or AdjLayer on the Clipboard, this bug can be reproed whenever body regains the focus, regardless of whether the app had changed focus.

  If the color picker is popping up for you in cases that do not fit the scenario that I just described, please send me a private message I want followed to isolate your case.

• Pipette does not work in Ultra key on first Pro CC 2015, V. 10.3.0 (202) Blue Fox

  Thanks in advance for any help that others can provide:

  I've just upgraded to Adobe first Pro CC 2015, V. 10.3.0 (202) Blue Fox

  and now, pipette does not work in Premiere Pro CC Ultra key 2015, (V. 10.3.0 (202) Blue Fox)

  I am running:

  iMac (retina 5K, 27 inches, end of 2015), 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3,

  The graphics card is a Radeon R9 M390 AMD 2048 MB.

  I am running: OS X 10.11.6 15 G (31), kernel version: Darwin 15.6.0

  OS X 10.11.6 (15G 31)

  Everything was fine until this last update of first CC last week!

  I just started this green screen project. I cannot choose a color using the pipette for "ultra-cle". If I use the eyedropper tool to try to choose the Green tint in the background color box flickers and then returns a black value when you click it.

  If I try to select the eyedropper tool in the color picker, he will not choose the color.

  If I "eyeball color", then Ultra key works, but this process is very error and time consuming!

  There's a comrade on the Adobe Forum which fixed the same problem by ' I've just upgraded to Adobe first Pro CC 2015, V. 10.3.0 (202) Blue Fox ".

  iMac (retina 5K, 27 inches, end of 2015), 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3,

  The graphics card is a Radeon R9 M390 AMD 2048 MB.

  I am running: OS X 10.11.6 (15 G 31) m, kernel version: Darwin 15.6.0

  OS X 10.11.6 (15G 31)

  Everything was fine, until this first CC upgrade last week!

  I just started this green screen project. I cannot choose a color using the pipette for "ultra-cle". If I use the eyedropper tool to try to choose the Green tint in the background color box flickers and then returns a black value when you click it.

  I try to select the eyedropper tool in the color picker, he will not choose the color.

  If I "eyeball color", then Ultra key works, but this process is very error and time consuming!

  There is an editor on the Adobe Forum which says that, "I ran like a root user and ran to first, magically fixed the problem. I had to create a new admin user, copy all my files from personal documents, then delete the old user and use the new user as my default. »

  Before I try this - it seems crazy to me - everyone knows this situation?

  Thank you in advance for your time and trouble,

  Barry O'Brien

  Problem is solved. Called the 800 number for Support Adobe. At Rahul S. on the phone in 5 minutes or less. He took over my computer.

  In the order of events, Rahul has tried:

  Throw the .plist files, restart - fail

  A new test sequence - has failed.

  Media cleaned in the database cache - cache fail

  Created the new library > App Support > common file - fail

  Latest version RELOADED first Pro CC - 9.0 - fail

  Created new user after trying to open my iMac as a user root - worked.

  Create a new user, reloaded Premiere Pro CC 2015 10.3 - all what God.

  This is the solution - the solution very provided by other users on this Forum a few months ago!

  Thanks to all those of you who pitched in. I hope to help you one day!

  Kind regards

  Barry O'Brien

• Police subtitles encoded in first Pro CC?

  Hello

  I am creation of subtitling in first Pro CC and I was wondering if it is possible to change the fonts/follow-up/leader etc. ?

  The police, spacing between letters and words and just general style of default captions is terrible!

  Imported in first subtitle files suffer from the same problem?

  As a question aside, is a good way to create subtitles on the Mac, it's free and easy?

  Thank you

  kinkersnick127 wrote:

  Hello

  I am creation of subtitling in first Pro CC and I was wondering if it is possible to change the fonts/follow-up/leader etc. ?

  The police, spacing between letters and words and just general style of default captions is terrible!

  Hi kinkersnick127,

  No, you cannot change the police or anything about the format of the text. Only the color.

  kinkersnick127 wrote:

  Imported in first subtitle files suffer from the same problem?

  This text style is the standard for captioning. You can't change it.

  kinkersnick127 wrote:

  As a question aside, is a good way to create subtitles on the Mac, it's free and easy?

  I don't think there are any good free tools, but some offer a free trial. Once you get your legends made, you can change them from scratch.

  Thank you
  Kevin

• applying files. Look in first Pro CC

  I use the first Pro CC (2015.3) in the effects box, under Lumetri looks like, there are presets to play with to change the color scheme, however I also found place online where you can download files is to add more options in Premiere Pro. An example, I downloaded some of those looks are:

  SpeedGrade looks like "digitalfilms.

  Although these files. Look comes from speedgrade, it is supposed to be a way that it can be applied to the clip in Premiere Pro.  Everybody there knows how to do this with. Look at files residing on your hard drive?

  Thank you all in advance for your comments.

  As said in the help files and shown in the tutorials on this by Adobe... for skin files, go to the Design tab, click the drop-down arrow, and navigate to the folder where you keep your files Look. Select one, and it will be applied.

  Neil

• No audio with m2t-clips imported in first pro cc 2015.4

  Hello!

  This problem is with premiere pro cc 2015.4 output. When you import clips m2t project, there is no audio track. I also tried to ingest the files and ingested turned out with no audio as well. Even the audio information lacked after ingestion.

  for example, VLC media player and grass valley edius performance audio clips without any problem. I also tried the option "Edit in adobe audition", and the audio transferred to listening was completely silent/vacuum wave, no sound at all.

  These clips have worked perfectly with the previous premiere pro version. What I come to GV Edius again to face the edition?

  This problem started with the 2015.4 update. There will be a solution for this? At present, the new premiere pro is completely useless for me. I can't use footage captured with my Sony Z5E-camera at all.

  Please do not ask me how to transfer videos to my project etc other nonsense questions. I have been editing videos for more than 15 years, I know what I'm doing.

  Cheers, Mikko Tirkkonen

  Producer of the AV, Finland

  It could be your preference files.  I had the same problem and complete these steps.

  Mac: \Users\Library\Application Support\Adobe

  Windows: C:\Users\\AppData\Roaming\Adobe

  Beware, if you follow these steps, all your preferences, workspaces, exclusives be lost.  You will return to default values.  Proceed at your own risk.

  1. close all applications.

  2 rename the Premiere Pro (e.g. first Pro_OLD) folder.

  Forcing Premiere Pro to re-create the default preferences.

  3. restart Premiere Pro and check.

  If the above does not work, delete the newly created folder of Premiere Pro and rename the "OLD" its original name folder.  At least you'll be no worse turned off.

  There is a most brutal stage that you wish to consider, which erases the entire Adobe folder and not the first Pro folder it contains.  I mention it here, but advises against procedure unless you are really comfortable with working within Windows.  Same warning, proceed at your own risk.

  You'll need to start your PC in safe mode, while none of the Adobe services are running.

  Navigate to the location above, but remain a plu top folder (for Windows: C\Users\\AppData\Roaming) and rename the Adobe Adobe_OLD folder.

  Restart your PC normally

  Again, you can always return by from your PC in safe mode, delete the newly created folder from Adobe and restore his former.

• First Pro CC 2015.3 lags and freezes. Became unusable

  I've just updated for first Pro CC 2015.3. Decision of the worst of my life.

  It became totally unusable.

  Whenever I have do the following with any clip (video, image, import AE):

  • Select one or more clips/sequences in the timeline panel
  • Click on the tab 'effects control '.
  • Open a sequence
  • Drag an effect on one of the sequences

  First pro gel, the loading of Windows 7 blue circle appears and remains frozen for almost a minute. I took me a half hour to apply an effect to 6 staples.

  I arrive with any file video/image/AE comp, with any type of effect (body default effect or third-party plugin it does not matter).

  MY SPECS:

  Windows 7 original

  Original Adobe CC and PAID

  Intel I7 - 3930K, 32 GB of RAM, GPU GTX970.

  The operating system that is installed on a 512 GB SSD, project on two 1 TB SSD in RAID 0.

  With this configuration, I worked for 4 years and it has always worked like charm.

  What can I do to fix this?

  Why is it that is happening all the?

  Turns out it was a compatibility problem with Colorista 2. I upgraded the plugin to 3 Colorista and now works.

• First Pro crashes when importing

  I filed a bug report, a week or two ago, and I have been using all sorts of workarounds to keep the first CC of Pro and Adobe After Effects to work while I am waiting for a solution.  But the first Pro CC seems to be now in a rut.  After Effects works fine now, fingers crossed.
  I run the app and try to import a file and it crashes as soon as I select Import from the context menu.

  As someone suggested, I tried to import other menus and the result is the same

  I have recently installed Windows 10 against my will
  I've recently updated all my Adobe aps, (Premier Pro, After Effects, and many others)
  When I updated Adobe it all my caches mapped on my hard drive of the pc.  I've reconfigured the caches in my external hard drive
  All my work files are on my external hard drive

  Besides as someone suggested, I tried the automatic power off except (worked for a while)
  I also tried another suggestion of people use 'Alt Shift' when I run the first Pro to clear the cache and it seemed to help temporarily
  I tried to restart to see if Windows contribute to the problem, with no luck

  I also tried connecting cloud creative before launching Pro
  Right now I'm at a standstill, I can't do anything

  I've been using CC several years now so I am familiar with the issues, but this last question / problem started about a month, around the same time installed Windows 10

  Please advise!

  
  

  05/08/2016 I think I knew what was going on / what was wrong.
  The latest incident dated 29/07/16 damaged my file, it became corrupted.  It's just frustrating to try to get it back.  PP could not find some of my files that I had imported and I couldn't fix it.
  I therefore decided to create a new project file and start over.  Now PP works again, therefore, the previous files must have been corrupted.  I also noticed that after I re-installed PP he put everything back to default so I had

  1) go to the preferences and uncheck the box for automatic backup
  2) go to preferences and uncheck fast Intel
  And finally to encompass all of the suggestions above I also restarted the PP by holding down the Shift/Alt key.  What I didn't know is when you start PP in this way, it clears the cache but it also resets the default values, so you guessed it, I had to

  (1) PP Sift/Alt pressed start

  2) go to preferences and uncheck the box for automatic backup

  3) go to preferences and uncheck fast Intel
  (4) then restart WITHOUT holding Shift /Alt, Caches have already been deleted in step 1
  Now I'm ready to start building my project once again file, so I decided to try a shortcut:
  I open the corrupted file and copy the timeline and pasted in my new project file: Walla!  I was back in business.  He re-created my old time line and felt that all the files that I had imported
  So I used a few times PP without any problem, but if I don't get an accident, I think I know how to keep it going, by following the steps I have described above.

• First Pro CC 2015.3 crash on launch, load long time and the low activity of the CPU

  I have similar problems running Windows 7/64 on a 12 core Xeon with 24 GB of memory. I tried to open an existing project and he told me that I had to create a new version - then it crashed several times as he tried to reload the film. Clean the media cache files did not much difference. A project using 66 gb of contents of source AVCHD 1080i took an entire day to convert. It's CRAZY!  Fortunately, I have a laptop with PP cc2015.2 still installed and managed to get a job done while the main system broke.

  It takes FOREVER for a project to load. This isn't a good thing! There is no CPU activity and very little memory is used - WHAT happens?

  The obvious lesson is the same old I've heard before - do no ameioration edit in the middle of a project and do not trust the Publisher of the software for legacy projects care!

  The new Premiere Pro has a default setting for H.264 decoding who try to use the hardware features of a processor Intel Core i7 chipset.

  If you are using an old computer as a 2008 MacPro with the Intel E5472 chip or a Dell or HP Xeon workstation that has a previous Intel processor as an E5335 or E5560 then you will need to disable this parameter.

  Open a new project in first Pro CC 2015.3

  Open the media in Edit-Preferences tab and locate the checkbox "Enable accelerated h.264 decoding Intel (requires restart). Clear the check box, and then restart the computer. If Premiere Pro is much faster then you now have the right setting.

• First Pro CC effects crashes

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 9.2.0.41

  Application timestamp: 56a208c9

  Fault Module name: TransmitScopes.prm

  Fault Module Version: 9.2.0.41

  Timestamp of Module error: 56a1f4b6

  Exception code: c0000005

  Exception offset: 0000000000065f24

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: 402d

  More information 2: 402de5ffa401c9d8089490ba405787ff

  3 more information: def5

  Additional information 4: def502e5e0d2db6114a6340d42a4d2e0

  This is the error I get.

  When I go to add effects or whatever it is sometimes it lets me play with effects for 30 seconds, other times I hit the effects, and it crashes.

  Also just discovered each time I try to open the tab of color it hangs.

  Machine features:

  Windows 7 Professional 64 bit

  9590 Black Edition 8 Core 4.7 Ghz AMD

  32 GB of DDR3 2200 MHz RAM

  NVIDIA GTX 780TI 3 Gig of RAM

  Seems to be fixed now in uninstalling and reinstalling.

  He installed Media Encoder this time.

  Did not have a crash report yet.

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• First Pro CC with Canon T6s workflow

  My name is Joe Hamm. I'm a jazz musician and become a filmmaker as well. I made a short documentary film which has contributed to my organization and my area sell to potential donors and build boards. I made this film using all material borrowed and learned from watching a lot of documentaries and to spend time on YouTube tutorials to learn editing techniques.

  Most of this was shot with a Canon XA10 I borrowed.

  Beyond the music: soundscapes, El Sistema and the power of music - YouTube

  Since then, I received requests for making movies for similar programs throughout the country. To reduce my costs, I finally bought a Canon T6s and am currently training on the subject. Soon I will start making movies again with the highest quality, that I was never able to accomplish.

  Here's my current workflow. I'd appreciate your comments to help me improve the quality of the image.

  Canon T6s, 18-135mm lens. Shooting at 23.98 FPS, FHD 1920 x 1080

  1. capture video sequences

  2. slide the MP4 files to Video folder on hard drive

  3. import into Media Encoder and convert to ProRes 422 (LT)

  4 import. In first Pro CC MOV files

  5 merge audio recordings and replace audio source

  6 edit

  7. apply the color corrections

  8. export to YouTube 1080

  9 download on YouTube

  Thanks for your ideas and your recommendations!

  You have a good start. I don't know how 'our' ideas will improve the quality of the image, but "we" can certainly help not the time it takes to go from 1 to 9 on your list.

  For your projects, I might suggest using prelude on ingestion... you could navigate to the media card reader, rub it to make sure what you want really... then set up a quick process to rename the clips for a work, copy the renamed original media to archive or backup file, transcode the same renowned media in your folder of work and of course add metadata at the same time you have need. ProRes422 (LT) is a correct choice for transcoding, but I might suggest Cineform 10-bit YUV... it's totally Visual lossless (especially with the media you use) and FLEET through the CPU used when editing.

  The sound that you have on your example is pretty decent... nice work. Most people get obsessed with pictures... and then find that without good sound, you might as well fuhgedaboudit. Good solid and adequate image is ok... Imaging good and bad sound is just useless. Don't know how you have managed this, but it's quite nice. Quite often the process is to get your low edit including say noise belonging to sections of voice-over added separately or used cams, and all the time that you have 'Edit locking' you send sound or hearing to do the necessary cleaning for sound media used.

  At roughly the time this color correction/grading themselves. Once again, only for the media on the final sequence.

  My only thought about the quality of the image... it's the 18-135 lens is convenient, but not necessarily the most beautiful image-creator you can get hold of.

  Neil