Satellite L750 - battery discharging while the computer turns

Similar Questions

• NB100 - multi-core of BIOS settings & battery discharge while off

  Hello, I bought the N100-R there are several monts. The unit is very reliable, but when taking take a closer look at the settings of the bios a few days ago I noticed that the multi-core enabled, while the processor is a single-core. After turning off I found that the drive produces some frequent hickups so intense, that the cursor starts jumping.
  Overall performance seems to be less catchy with multi-core disabled.
  The logs say nothing about the problem of hard drive, so I made a recovery today including about 168 updates in a row (as a nice side effect the update manager seem to be able to find the files of package again, which was not the case for two weeks or more).
  My question is, why the multi-core is enabled on a machine simple heart?

  The biggest problem is the issue of discharge while the device is in standby mode or even turned off.
  Some entries to mention this issue recommending upgrades the core among others), and I wonder if Toshiba is about to face in the near future.
  Here, even once, I played with the settings of the bios and disabled option wake-up-on-lan, such as recommended, however nothing has changed.
  Thanks in advance.

  Although single-core CPU, I thought they were hyperthreading (with what looks like two hearts to the BONE). In this case I guess that this setting disables hyperthreading?

  168 updates? What is the first set of updates never applied? Sounds like a lot!

• I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine.

  I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine. To explain in more depth. As the computer boots the apple logo flashes off the coast and then turn it back on and finishes loading. It doesn't seem to be any questions I want to just make sure because I just bought this mac.

  It is booting normal up -.

• battery drains while the macbook pro is in sleep

  I have a Macbook Pro 13 inch, retina.  About 6 months.

  Problem: Battery drains about 4%-5% per hour or more, while the computer is in sleep.  Which means that if I go to bed with the 30% battery charge, I'll wake up to a dead computer.

  It started to happen about 2 weeks ago.  I already brought to an authorized, who ran the diagnostics.  Initially he failed cooling system test, but he re-greased the sink 'fan', and supposedly he passed all the tests.  But battery still absurdly quickly.

  I tried to reset the SMC, by someone on the suggestion of this forum, but didn't seem to help.

  Any suggestion would be appreciated!

  Bring it for repair.  Your MBP has a warranty for which you paid the money.  Use the warranty.

  Ciao.

• My printer is configured to start when the computer turns on. I want to reconfigure it so that it does not turn

  My printer is configured to start when the computer turns on.  I want to reconfigure it so that it won't turn.  I know this is probably a simple change, but I can't find the path anywhere.  Any help?

  I guess you do NOT mean that you have both printer and computer plugged into the same power strip and both are turn on when you turn on the power strip.

  As nearly as I can determine the rather thin material in the Guide for the Dell P713w user, probably have enabled "Eco-Mode" or the mode 'sleep '.  See page 19 of the User Guide (if you don't have it, download it here: http://support.dell.com/support/edocs/systems/PRN_P713w/en/index.htm).

  When this feature is enabled, the printer goes into mode low power when it has been idle for a while.  When the computer is off, the printer is by definition inactive and so will go to low power, shortly after that the computer is turned off.  When the computer is turned on, it detects the presence of the printer and connects to the printer.  Apparently, the printer interprets this string as the "no-idle" and out of his low-power mode, which appears as if it is "turn on."

  In addition, this printer performs an automatic maintenance cycle every week if it is plugged into a power outlet. It will briefly exit Power Saver mode or turn on temporarily if it is disabled.

  At least one of the lights on the printer flashes power on and off when you think that the printer is turned off?  If so, it is in energy saving mode.

  Of course, I may be totally wrong, but it seems to me if you actually turn off the printer by pressing the button on / off on screen, he should not be able to auto (except once / week maintenance cycle).  From the Manual:

  Note: When the printer is turned on, press [power] to switch to the power saving mode. Press and hold [power] for 3 seconds to turn off the printer.

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

  MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

  The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

  If your drive CAN be mounted, start-up continues normally.

  If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

  If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

  I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

• In Windows Vista Home Basic automatic updates, anti virus updates and scans, etc. are not made during the night while the computer is in sleep.

  Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?

  Hi daglo1963,

  Thanks for posting on the Forum of responses of Vista.

  When Vista is in "standby", like updating the activity is suspended.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Satellite M100 will not charge the battery while the computer is on

  Hi all

  I have a M100 and the battery won't charge while it is running.
  The battery starts to charge when I plug in the adapter and the orange light comes on. 10 seconds later it stops charging.
  If the battery has more than 90% of the costs it wll the rest very well.
  I have three batteries that all do the same thing on this computer. All three batteries are working fne on my other M series.

  When the computer is off, it loads very well.

  Why is it so?

  Hello

  I think that the problem of charging the battery is about the problem of portable equipment.
  Maybe it's something s wrong with electronic power supply or another part on the motherboard.
  I doubt that the problem could be solved by updating the BIOS but you should definitely check if you are using the latest version of the BIOS update and test again
  If that does not help, then you should get in touch with a local service for verification of equipment technician

  But note; If it s the question of the motherboard, the motherboard needs to be replaced and it would be a costly affair

• Tecra A5 - charges the battery only when the computer is turned off

  Hello

  For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

  I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

  On the other hand, if I turn off the computer, the battery starts to charge.
  I replaced the battery a few months ago, so I think it's still OK.

  The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

  Thanks in advance for your contributions.

  > The charger is defective?

  Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

• Satellite A30 - battery discharges when connected to the network

  Hello

  I hope someone can help me!
  I have a Toshiba Satellite A30. He has recently started to discharge the battery when it is connected to and running off, the sector. If the screen icon shows current alternative (mode full power), but the % of the battery decreases by 5% per minute.

  The battery on the laptop light is off. If I turned off the pc, the light will go orange, load. When I restart, it stays orange for a few seconds, then turns off again.

  Is this a problem with the battery or load main, or something else? Please help, this is driving me crazy, that I keep having to turn it off to recharge!

  Thank you very much

  I think battery is responsible for this. Satellite A30 is old enough laptop model, so I guess the battery is the best.
  Remove the battery and check the label of the battery. You will find the exact reference. using this part number, you can order new battery for your laptop satellite.

• Satellite C50 - rate or battery drain while it is turned off

  My C50 Satellite new loses the battery charge at the rate of 3% per day while THAT SWITCHED OFF, which seems rather excessive.

  I have some batteries "dud"?

  This is nothing unusual, and on this forum, you will find number of threads with this and similar questions.
  Check you must complete interesting documents:
  http://APS2.toshiba-tro.de/KB0/FAQ9C012L0001R01.htm
  http://APS2.toshiba-tro.de/KB0/OPT8B02I60000R01.htm

• Satellite U400-112 - opening of the screen turns off the computer

  Hello

  When I open the screen, then when it crosses a certain opening angle, the computer is off. Then, I need to plug in the external power supply and remove the battery. After that, I can turn on the laptop.

  After my way back, when I turned on the laptop, the screen was white alone (no other colors) and when I open it again, disables NB.

  So I suppose, in the articulation of the screen cable are damaged. Because the external LCD (via VGA) works very well.
  Laptop is still under warranty. don't you think that it can be applied?

  Thanks for the tips, John.

  Hello John

  We don't talk much about it. If the warranty is still valid, contact the nearest Toshiba authorized service provider as soon as possible.
  They will fix it for free.