Default volume is hidden and not mounted on reboot

Similar Questions

• Windows 8.1 lost the capacity of the volume, brightness keyboard and not let me download my Norton software.

  Original title: windows 8.1

  upgraded to 8.1 from 8 on a new Toshiba laptop purchased in may 2013.

  with 8.1 lost the capacity of the volume, brightness keyboard and not let me download my Norton software.
  No matter what is said, Adobe flash does NOT work in windows 8 and won't let me not download it from adobe.
  summer on the phone with technical support both windows and Toshiba, each fingers towards each other, saying that it will take a few months to coordinate the software updates.
  updates on this?

  8.1 is a beta and has a lot OF known issues under development and lot of unknown problems that have not yet been discovered.  It should be downloaded only by those who are comfortable, dealing with the problems of a trial version of the software.

  Lost the brightness controls and volume: do you need a driver. Your computer manufacturer may not have built their hardware drivers for Windows 8.1 control again.  They are not forced to do it to the beta-test system, so "use at your own risk.

  "Unable to download Norton".  What is the error you get?  Is this a problem with the download from the Norton site, or the installation process it?

  "Adobe Flash does not work".  Yes it does, it is integrated and you don't need to install it.  Just go to any Web site that uses flash and it will take care of itself.

  "Toshiba and Microsoft Point fingers"  Toshiba is not necessary to press the test system for windows 8.1, and Microsoft provides no support for the test software.  That is why they you warned that the 8.1 has many known and unknown problems and warned against install unless you like to manipulate and test out these problems.

  Looks like you need back to Windows 8 and wait for the final version.

• Using the file class - muse. by default on my computer and not the last used folder.

  Using the file class - muse by default to my computer and not to the last used folder.

  Hello Perri,

  I tested on my end, and it seems that the issue is ongoing because of Air Version 3.8 was last updated. If restore you the version of Air to 3.7 this problem would be fixed.

  Here is the link to the page for the available versions of Adobe Air: http://helpx.adobe.com/air/kb/archived-air-sdk-version.html and you can use this link to download Adobe Air version 3.7:
  http://download.Macromedia.com/air/Win/Download/3.7/AdobeAIRInstaller.exe (Windows)

  http://download.Macromedia.com/air/Mac/download/3.7/AdobeAIR.dmg (Mac)

  Hope this information helps.

  Kind regards

  Fox

• My tab 'Options files and research', 'Task Manager ', 'Run' & browsers other than windows explorer is hidden and not accessible. Emergency assistance is needed.

  As I said in the title, my problem is that I am not able to acess file and Search tab 'Options', ' Task Manager ', 'Run' & browsers other than windows explore.

  1. in the case of a tab 'Folder and search options' in the tab to organize, in the Explorer window, the tab appears as the hidden and cannot be clicked. The same"Folder and search options" when I looked in Control Panel, the icon was not seen or available.

  2. the same is also the case for the Task Manager. In the click right option on the taskbar displays the"Task manager" tab, but it seems to also be hidden or accessible when I press alt + ctrl + del window shows no option Task Manager or the tab.

  3. when I tried to run ' run the command ' the command window does not come and the following message appears.

  "Windows cannot find"C:\Windows\System32\cmd.exe". Make sure you typed the name correctly and then try again. »

  4. in a similar way when I tried to acess or run the Fireox internet browser, Google chrome and safari browser he showed asimilar message as illustrated tried to reinsall above.i browsers. It is renstalling, but the same error message appears after the reinstalling.   butthere was no problem in access of Microsoft Internet Explore.

  Windows Internet explore, the homepage has changed automatically and it opens the homepage given below.

  http://6-c-c-n-0.-u-.i-k-r-g-1-0-u-5-1-f-3-g-Li-9-p-1-x-t-6-g-l-8-m-q-y-s-k-6-l.info

  I am currently using the Microsoft Security Essentials as my Antivirus which is uptodate. Run full scans with antivirus but the scans is not revealed. Also, I'm a windows user who is also updated regularly.

  So far, I noticed only these problems that make me very difficult to work. The main problem is that I'm not in a situation to format my laptop. Please help me with these problems.

  Hello

  Restart in safe mode and run the antivirus scans here. You have symptoms of an infected machine. Scanning in safe mode will reduce efforts of the virus to avoid detection.

  To restart in safe mode, restart normally, and when the system resets you can press the F8 key. It is point immediately after the screen logo POST or manufacturer initial of the system, and just before Windows starts to load. This will give you a boot menu where you can choose Safe mode.

  While you're here, you must also download and run the tool free malwarebytes here:http://www.malwarebytes.org/ (choose Safe mode with networking to do this). He can catch something that lack of MSE, no security tool is perfect.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Drive external DRIVE will not mount after resizing in Windows

  Hi all

  I got a 1 TB external drive that I used for a while about 10 Windows and OSX (El Capitan). I had two partitions Configuration for use on every platform without any problems.

  Then, I needed extra space on the Windows partition, so I think that, if I remember correctly, that I've resized using the disk management tool in Windows. I reduced the OSX volume and increased the size of the Windows volume. I can probably hear you all shout now.

  Surprise, my volume OSX will now not mount when I run in El Capitan. It does not show in disk utility, and the only way to 'see' it is using diskutil:

  Output: Diskutil list

  / dev/disk2 (external, physical):

  #:                       TYPE      NAME                                                            SIZE        IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk2

  1:                       EFI EFI                                                                         209.7 MB  disk2s1

  2: 000100AF-4028-0006-2192-BA7200000000 650,3 GB disk2s2

  3: 000100AF-7220-70FB-2192-BA7200000000 23.7 GB disk2s3

  4: Apple_HFS Install OS X Yosemite 5.7 GB disk2s4

  Output: Diskutil list cs

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group DD8EBA77-8349-4762-BD32-4D45402DDE23

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 120473067520 B (120.5 GB)

  Free space: 12656640 B (12.7 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120473067520 B (120.5 GB)

  |

  + -> 70EB98AB-5D10-4774-89C9-F66D334A7BA0 family of Logical Volume

  ----------------------------------------------------------

  Type of encryption: AES - XTS

  Encryption status: unlocked

  The conversion status: complete

  High level queries: secure

  |                        Password required

  |                        Accepts new users

  |                        A visible users

  |                        At the Volume key

  |

  +-> Logical Volume BEE2BAE7-909A-42F8-91F1-55085485904A

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 120108089344 B (120.1 GB)

  Reversible: Yes (unlock and decryption required)

  Put the situation: Restart required

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Output: TPG - vv - r sudo show/dev/disk2

  See the TPG: / dev/disk2: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk2: MBR suspicious to sector 0

  See the TPG: / dev/disk2: Pri GPT to sector 1

  See the TPG: / dev/disk2: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1270198464 2 part TPG - 000100AF-4028-0006-2192-BA7200000000

  1270608104 624918840

  1895526944 46298496 3 part TPG - 000100AF-7220-70FB-2192-BA7200000000

  1941825440 262144

  1942087584 11175400 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Output from: sudo fdisk/dev/disk2

  Disk: geometry / dev/disk2: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-1270198464] HFS +.

  3: 1023 254 63 AF-1023 254 63 [1895526944-46298496] HFS +.

  04:00 0 0 0-0 0 0 [0-0] unused

  #2 partition is my concern. It contains my library, iPhoto and other important pieces.

  So, is anyway that I can get it back? What can I do to try to preserve its data? Thank you very much! Chris

  It comes out by any other command that could help someone point me in the right direction to solve this? Thank you

• "$RECYCLE." BIN"and"System Volume Information"hidden folder created in each drive

  I got 15 HP r014tx Notebook in which "$RECYCLE." BIN"and"System Volume Information"folder created in each player automatically hidden name. It didn't get deleted if I try to remove it. I use McAfee Anitvirus come with pre-installed with 30-day track.

  I want to know how to remove this folder "$RECYCLE." BIN"and"System Volume Information"hidden folder name.

  rhl_yadav,

  It is IMPORTANT that you do not delete these files. They are very important to the operating system.

  Instead, you can hide:

  • Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options.
  • Click the view tab.
  • Under Advanced settings, make sure that "Show hidden files and folders" and "Hide protected operating system files ' are not checked, and then click OK.

  * TechWars *.

• Hidden and protected by default point unregistered static value?

  Hello
  
  a form of DML, I have a hidden and protected from the text field component. I have these settings:
  
  Source:
  Still, replacing value that exists in session state
  Static assignment (the value corresponds to the attribute of the source)
  By session
  PARTY_SC (Source value or expression): this is the column name
  After calculation of calculation (Nothing)
  
  By default:
  Default value: 'FOR '.
  By default the value Type: static text with Substitutions of Session State
  
  What I'm trying to achieve is to set the value of this field (element) before I / U in the database. However, this does not wotk as the Session value of the item remains NULL and whan pressing record button of database of course she rejects with msg: ORA-01400: cannot insert NULL into «WEBPOS» «PARTS '.» "" PARTY_SC ". Cannot process the PARTIES of the table line. Back by demand. There is also a validation rule for the value null in the processing of the Page for this field.
  
  No idea why and how solve it?
  
  TIA

  Helllo

  If you use the automatic treatment of the line (DML) to insert into the table and then Type 'Source' for the page element corresponding to "PARTY_SC" should be "Database column".

  CITY

• Upgraded to v18 and default search home page does not work

  I've just updated to Firefox 18 and my default Firefox start page does not work. I type in a Word and press 'enter' or click on search and nothing happens.
  If I use the Google bar without problem.

  If there is a problem with the search through the default value: home page and then try to reset the search engine used on the subject: homepage.

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the topic: config page and close and restart Firefox to restore the on: default home page.

  • http://KB.mozillazine.org/about:config
  1. Open the topic: config page through the address bar
  2. Type in the filter bar: mstone
  3. Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  4. Close and restart Firefox

  If this did not help, then remove the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the foregoing.

• Satellite L850-B139 - not mounted boot Volume error

  I get an error message of boot Volume not mounted on my Windows which I've updated to Windows 10. While I fix this problem, it needs to insert the restore disc but unfortunately I don't have the disk. I tried to download the recovery media via the Toshiba Support Service, but it is not available since I buy this in the Middle East. Please help me find or where I can download the recovery disc. My laptop model is Satellite-L850-B139 part number: PSKDLV-0E700UAR

  Thank you

  You can order on the site of Toshiba recovery disks.

  Win10 is not supported on this model.

• RAID 5 volume is corrupted, RAW and not NTFS file systems shows now Windows can't read the Volume.

  RAID 5 volume is corrupted, files systems shows RAW and not NTFS now, Windows cannot read Volume, how do I convert to NTFS without losing data on the Volume. Raid 5 has been created by the Raid software

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• Setting IE/Live Hotmail as default mail client, so it responds to a click on a mailto link: link and not Outlook Express

  It is actually in two parts/problems; Maybe (probably) closely related.
  ... And it's weird because it used to work (weird especially when it comes to problem no. 1 b).

  Problem # 1
  When I click on an e-mail address embedded (a mailto link :) in some (.doc .rtf, .html, etc.) I opened, I want to have the system open IE, connect me to my Windows Live Hotmail (http://mail.live.com/...) account and open the new page/screen e-mail message.) He used to do this. I have somehow messed up things upwards; How I know not (duh). Instead, it will now fire a new Message Outlook Express 6.0 dialog box.

  (1) I'm under Win XP Pro SP3 with all the critical updates installed.

  (2) I have a hotmail.com account and the system has my saved credentials.

  (3) I have Windows Live Messenger and Windows Live Mail is installed.

  (4) I have Windows Live Messenger is set up (under the menu item Tools/Options/Connection tab) with:
  a. "automatically run Windows Live Messenger when I connect Windows' checked
  b. "'Main window open Windows Live Messenger to Windows Live Messenger startup' UNchecked '.
  c. "automatically open a session when connected to the Internet" checked

  (5) I have Windows Live Mail set up (the tab Tools/Options/connections point menu - sign in to Windows Live services section) to "Stop signing In" - i.e. the "Sign In" button is enabled and the 'Stop Signing In' button is disabled (because it is already selected)

  This configuration (4 & 5) is so when I right click on the Windows Live Messenger icon in the system Notification bar and select 'Mail box' in the menu contextual, Messenger opens IE to my Hotmail Live (http://mail.live.com/...) account, sign me and puts me in my Inbox as opposed to the opening of the Live Mail client. No problem, it's what I want. The only time where I use the client Live Mail is when I have to compose an e-mail with pictures incorporated into the body of the message (which is rare), and then I manually start it (Live Mail). This can be done using IE/Live Hotmail; I can only attach photos there, not incorporated the. That's how my system was config support when you click on a mailto link: link would open up IE/Live Hotmail and not Outlook Express.

  In addition,
     
  (6) I have:
  a. under the radio button "Use my current e-mail program" Set Program Access and Defaults/Custom is selected and have the box "enable access to this program" UNchecked for Outlook Express (I also tried uncheck the 'enable...) "for Windows Live Mail - no change.

  I then tried...
  (b) in "Add/Remove Windows components" untick the Outlook Express check box. I then let XP run installation and rebooted.

  The reason why I did 6 b is to see what tracks if Outlook Express is not installed.
  Now, where is start to get weird and brings me to...

  Problem no. 1 b
  Outlook Express 6.0 (OE6.0) be uninstall under XP Pro/SP3 and if so, how?

  After step 6 b restarts, I open a file with a link to e-mail built in, clicked on it and now it opens nevertheless OE6.0
  So I open Win Explorer and of course the folder as c:\programs\outlook Express is still there and complete with all files .dll, .exe, etc..
  Now I'm really scratching my head! I know I said XP installation does not install Outlook Express.

  So now I decide to play with fire...
  I open the upward Task Manager to see which runs when the new Message of OE6.0 dialog box is in place (this is msimn.exe)
  So just to smile and laugh, I msimn.exe and rename it to Xmsimn.exe, go back in the file with the link, click on it and what's going on, you guessed it, OE6.0 is running! I switch back to Win Explorer, and the renamed file is still there, but now IS msimn.exe BAAAACK!
   
  Now, here's where it comes down right spoooooky. I created a new folder in C:\Programs\Outlook Express, all of the files selected in the C:\Programs\Outlook Express and drop them in the new folder. And then looking at the contents of the Outlook Express folder in the right pane (which is now empty other than the new folder), one by one, all the files OE re - APPEAR in the OE folder.
  WHAT IS PAST WITH IT!

  All the files that I moved to the new folder are still there, including the renowned Xmsimn.exe.
  It is as if the system will not let you remove the OE components and withdrew them a .cab file, somewhere, even if I said do not install Outlook Express!

  Now, this problem is really secondary to # 1 has. I don't really need the answer, he just freaks me the system is something like this and I would like to know how and why of it. I use any OE 6.0, it's just take disk space.
  (I even uninstalled my installation of MS Office Outlook)

  And I don't like how # 1a is resolved. I am quite able to pull the top of RegEdt32 or what is needed to fix it (after backup the registry and/or a restore point first, of course.)

  Any ideas?

  Thanks in advance,
  Paul

  Well, I found the answer to problem # 1 to myself.
  Somehow the IE Tools/Internet Options/programs Internet/tab setting programs section e-mail field has NOT been defined. It was empty.
  I put it to "Windows Live Hotmail" and BINGO! Click on an embedded mailto: link and pops up a new IE window connected to my Hotmail account, open electronic 'Composer the Message' page with the To: field with the link I clicked on.

  Now if only one of you gurus out there can answer problem # 1 b (can Outlook Express 6.0 (OE6.0) be uninstall under XP Pro/SP3 and if so, how? -see my OP) I'll be in sleep with nightmares of moved files reappear magically in an empty folder!

• Epson Workforce 645 appears as the default on my computer and it says 'ready', but it will not be printed.

  Original title: printing problems

  I am facing a problem with the printer - or maybe a computer problem.  I can't pinpoint the problem.  My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed.  My documents will in Quebec, but after about 30 seconds, the State spends printing, error.  I've tried everything.  (Occasionally), it will display a test page.    Any ideas?

  Hi Julia,

   

  Thanks for posting the question in the Microsoft Community!

   

  You are unable to print and get the error message.

   

  I imagine the frustration you feel when you are unable to print.

  This can happen due to connection problems, malicious content or third-party programs.

   

  1 have you tried all the Troubleshooting steps?

  2 is the computer, or a printer attached to a domain network?

  3. are you able to print from Notepad?

  4. what documents do you speak?

  5 is the full error message?

   

  To check if it's because of connection problems malware content follow the steps mentioned below:

   

  Method 1: Run the troubleshooter

   

  See the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

   

  Method 2: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135 .

   

  Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.

   

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• On Windows 8, by default, OneNote when I try to use the print option. How do I set printer as default and not in OneNote?

  When I try to use the print option. How do I set printer as default and not in OneNote? Also, when I want to print from a web page (on the Web page printing option) it goes to OneNote and not print. I have also pulled up a file saved in OneNote and selected the print option in the Menu. I selected a specific page and is nevertheless not print?

  Because your message is off-topic in the comment forum, I moved it to the forum Windows 8 "Performance and Maintenance", where it is more on the subject.

  As you watch the start page, type "default printer".  A list appears on the right side of the screen.  Tap 'settings' and 'Change the default printer' will appear on the left.  Tap it.  Your devices folder and printers opens on the desktop.  You will see that "Send to OneNote" will have a green check mark next to it.  Right click on the printer, if you have already installed it, then select "Set as default".  Close the folder.  Therefore, when printing, your printer will be the default device.

  If you have not yet installed a printer, make sure you download the latest driver for 8 compatible of Windows to the web site of the manufacturer and install the driver following the instructions of the manufacturer.  Then set the default device.

• Save a file for a PES file default .psd and not ps.

  Hello world

  I am currently taking a college class on Photoshop and digital photography online.  I use Photoshop Creative Cloud and save all my work as .psd files to allow my teacher to display my work flow. I also have Photoshop Elements on my laptop that I used to use as my program prior to the go - to photo editing class.

  When I save a file in Photoshop CC as a .psd file, the icon logo "pse" (Photoshop Elements) instead of "ps" (Photoshop) logo.  It does look as if I worked in the elements and not in the program Photoshop CC required, even if I did not open the photo in elements, working exclusively in the creative cloud and convert to 16-bit immediately, which is not compatible with the elements.

  I suppose that elements is somehow selected by default because it is first install the program. But how can I do Photoshop CC my program by default when you save .psd files? Any help will be greatly appreciated. I've exhausted google!

  Right-click on a psd file in Windows Explorer and then choose open with > choose default program...

  In the next dialog box, select Photoshop and check always use the selected program to open this type of file.

  

• Have volume of CS3 and CS5 licenses I need to disable. Any ideas? The customer support is not available.

  Have volume of CS3 and CS5 licenses I need to disable. Any ideas? The customer support is not available.

  http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html