Defender of Windows guard turn off after reboot

Similar Questions

• Windows Firewall turns off after a reboot

  Original title: Windows Firewall...

  I put my windows firewall on. When I restart my computer it is turned off, do I need to put it whenever I log on my computer?

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  I suggest you follow the steps proposed by Azam K in the following link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Security/Windows-Firewall-turn-off-every-time-i-restart-my/2c7479fa-0dd0-4175-bfb9-212b86fc90f4

  I hope this helps.

• Satellite P200-1 - wireless turns off after reboot

  Hello

  On Satellite P200-1BY, on reboot, the wi - fi turns off to restart. The switch is then unnecessary.
  I do not know whence they come, and an another reboot put the right thing.

  Can reactivate you with FN + F8?

• Satellite A100 - monitor turns off after reboot

  Not here a load of HARD drive, also if the output of the BIOS not are displays logo. Just how to work again with turn off phone then turn on again. I also try external VGA display with cable (VGA VGA) have same problem.

  I try to put the connector again still.

  Toshiba Satellite A100 (model PSAA8) chipset Intel

  Hey mate,

  If you have the same problem on an external monitor I think that it s related to the motherboard or something else. He should t be a problem of the internal screen I think

  It's really hard to say something about it, but you can try to update the display driver and BIOS. The two you can find on the Toshiba site.
  Check it!

  In addition, it would be interesting to know what operating system you are using. Operating system preinstalled Toshiba?

• Automatic deployment: vMotion turning off after reboot

  Details of the environment:

  vCenter 5.5 build 1750787

  Image: ESXiu2 build 2068190

  With the help of vSwitches standard

  vSwitch0 - contains exchanges VM

  vSwitch1 - contains 2 ports vMotion

  vSwitch2 - contains 1 management port

  (I know, it's silly, but it was done this way to conform to virtualization as a platform of services)

  It is all set up in the profile of the host and after reboot, it shows 'host unenforceable contract... '. «and «rendering of the services not enabled...» "- I found the following link: http://www.core-four.info/2014/03/vmotion-not-getting-enabled-on-vmkernel.html but we do not use network coredump so this workaround is a no-go.

  I wanted to add the solution. I looked through the logs of boot and discovered that he had a conflict with some of the parameters when starting. In particular the IPv6 settings were great capricious and caused a kernel panic (sort of) which caused the ESXi host to cease to apply the profile.

  TL; Dr. look auto deploy newspapers (on the host and vCenter)

• Windows XP - monitor not turns off, power turns off after 5 minutes options the Auto value not

  sys is xp

  * original title - I can't disable the monitor in auto. power options are set to turn off monitor after 5 min, but it never turs of when I stop using the unit *.

  Hi jerryabts,
   
  -Which is the unit that you are talking about?
   
   
  Try to download the patch from the link below and install it to resolve this problem:
   
  The monitor may not turn off on a Windows XP-based computer even if you set the monitor to turn off after a period of inactivity

• Firewall Windows 7 turns off intermittently, sometimes after WSUS updates

  Firewall Windows 7 turns off intermittently, sometimes after WSUS updates and other times when no updates have been pushed back.  He did 3 days now online this week.  Last week, a day, two weeks before anything.  It's a Dell latitude E6400, with the latest version of the Bios, chipset and device drivers.  Running Office 2010, Visio Pro 2010 and AutoCad 2012, as the main applications.  Any help would be greatly appreciated.

  Thank you

  Michael

  Hi Michael,

  Thanks for the reply.

  You have installed on the computer registry cleaners?

  I suggest you to scan SFC (System File Checker) and check if it helps.

  SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• Tecra 9100 comes on intermittently and turns off after 10-15 seconds

  Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

  The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

  It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

  Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

  Thank you

  Hey,.

  Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

  But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

• iPhone 6s turns off after start upward with 30% of remaining battery

  6 s iPhone will turn off after starting with30% battery left please help

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Wireless WAN T410 turns off after round approve 3 minutes

  Hi all

  I have a T410 with windows 7 32-bit company. The normal Wi - Fi connection and connection blue tooth are stable and works well. However it seems that Wireless WAN radio turns off after 5 minutes without worrying if I'm logged in or not. I have installed the dial-up connection program and reconstructed profiles with no luck. I also change the power management setting both in the Device Manager in Control Panel.

  What else I can try.

  Note This is for the mobile card radio.

  Concerning

  J

  Hello guys,.

• Y450 screen turns off after 5 minutes, set to never power settings

  The display on my Y450 turns off after 5 minutes if it is connected or not. I changed the power settings on all levels of the power to never turn off the display, but he keeps doing. I thought that maybe it had something to do with windows is not fully updated so I did it earlier today, but it has not changed. It doesn't matter whether the system is energy saving, balanced or a custom.

  I don't know what to do to stop it, but it's annoying when I play videos and turn the screen on every 5 minutes. Is there another program I'm missing that somehow overrides the power settings?

  You may also need to change the power settings for the windows power management and lenovo power management.

  We also know, that the problem persists only watch movies?

• Cannot open PDF files, it turns off after 10 sec.

  Original title: pdf file

  When I open a PDF file it turns off after 10 sec.

  How can I reset it so I can read or print the PDF file.

  Thank you.

  Ron.

  Hello

  1. What is the exact error message or error code?
  2 are you facing this problem with a particular PFD file?
  3 is that the question is limited to PDF files?

  I suggest you uninstall and reinstall PDF program and check if it helps.

  Uninstall a program: http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program: http://windows.microsoft.com/en-US/windows7/Install-a-program

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk

  If you still have the problem then I recommend you to contact the program vendor and check if it helps.

• Monitor may not turn off after setting the screen turns off after a period of inactivity

  Original title: control screen does not turn off

  My cell phone 6 year old runs today to Win XP Pro and IE7 and Firefox. My screen has been set to turn off after 15 minutes, but these days he keeps any. It stays ON all day.

  Attempted to solve by setting to turn off in 10 minutes, but it makes no difference, what could be the problem?

  TIA

  First of all, you don't want to do the hardware updates through the Microsoft Update Website.

  Secondly, there are a couple ways you can do this:

  1. go in the Device Manager (start > Control Panel > administrative tools > computer management > Device Manager).    tedious, but this way you are sure.

  Double-click each item, having developed each sign, select the driver tab and choose Update driver, let windows search automatically, make sure that you are connected to the internet.  Do this for each item that you want to search for updated drivers.

  2. go in the manufacturer's website. For example, I use a Dell Dimension and move the driver Dell downloads Web site.

  If you mean hardware upgrade from Microsoft (not Windows which is software) you would search Microsoft.com site for driver downloads.

  Hope this helps, after back with your results, please.

• System does not boot up... message is... "" peripheral USB on the detected... current situation system turns off after 15 seconds.

  I recently bought a new golf gps device and connected to my desktop pc to register. After unplug his computer m USB cable I can't start my computer.

  whenever I start it the pc his usual routine, but then I saw the following message... USB device to the system detected. System turns off after 15 seconds.l

  Fifteen seconds after the system shuts down. It wiil also not afford to start or access the safe mode, the program installation or any other type of recovery mode, I could access normally. It will also not recognize my Win XP installation disc. I guess it's because of the configuration of the BIOS which accesses the hard drive before the CD rom drive.

  The problem was obviously created by the golf gps USB cable but I can't find a way to get the system to boot so I can find a way to eliminate the problem.

  Thanks for any help that anyone can provide. I am running WinXP Sp3

  Hi PAULARUNNELS,

  ·         What happens when you try to start in the Advanced startup options?

  ·         You receive the same error?

  ·         You external devices connected now?

  Try the following.

  Method 1: Disconnect external devices not essential, connected to the computer and restart the computer.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 3: If you are unable to start on one of the advanced startup options, and then you can follow this article.

  How do I recover from a corrupted registry that prevents Windows XP startup