Define a Site

Similar Questions

• In cs4 to define a site, he always tells me that I am in another folder sites when I'm really not

  I even deleted on the files it says it's in and just, it will move to another folder.  I created it on the desk recently. Before I had it on the C drive, but always keep the same error message.

  How many sites you have defined? The error means that you have another site which root folder includes the folder the current site root. It must be like that - just find another site. Do scroll through your sites and examine the specification of the file root of each site. Let us know when you have found it.

• How to define which site comes back in a new tab?

  Since the installation of the latest version of Firefox, when I click on '+' to create a new tab, the Yahoo search site always comes to the top. I do not want the Web site. How can I change coming to the site?

  It will be because of an add-on. Check for modules of Yahoo if none of them have added to it. An another add-on which has net gel assistant, if you have one you can uninstall it and Firefox should return to the display of a blank tab.

  There are modules that allow you to specify what to display on a new tab, as a complement to NewTabURL , but except if you discover that the module is originally opened with yahoo and disable/uninstall, it is best not to install NewTabURL as it might conflict with another add-on.

• Routing of traffic between two VPN Site-to-Site Tunnels

  Hi people,

  I am trying to establish routing between two vpn Site-to-Site tunnels which are destined for the same outside the interface of my Cisco ASA.

  Please find attached flowchart for the same thing. All used firewalls are Cisco ASA 5520.

  Two VPN tunnels between Point A and Point B, Point B and Point C is too much upward. I activated same command to permit security level interface also intra.

  How can I activate the LAN subnets traffic behind Point to join LAN subnets behind C Point without having to create a tunnel separated between Point A and Point C

  Thank you very much.

  Hello

  Basically, you will need to NAT0 and VPN rules on each site to allow this traffic.

  I think that the configurations should look something like below. Naturally you will already probably a NAT0 configuration and certainly the L2L VPN configuration

  Site has

  access-list NAT0 note NAT0 rule for SiteA SiteC traffic

  access-list allowed NAT0 ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0

  NAT (inside) 0 access-list NAT0

  Note L2L-VPN-CRYPTO-SITEB access-list interesting traffic for SiteA to SiteC

  access-list L2L-VPN-CRYPTO-SITEB permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0

  Where

  • NAT0 = is the ACL to be used in the NAT0 rules that will exempt SiteA SiteC NAT traffic
  • NAT = is the line of configuration NAT0
  • L2l-VPN-CRYPTO-SITEB = LCA in configurations VPN L2L that defines the SiteA LAN to LAN SiteC traffic must use the VPN L2L existing SiteB

  Site B

  access list OUTSIDE-NAT0 note NAT0 rule for SiteA SiteC traffic

  OUTSIDE-NAT0 allowed 192.168.1.0 ip access list 255.255.255.0 192.168.3.0 255.255.255.0

  NAT (outside) 0-list of access OUTSIDE-NAT0

  Note L2L-VPN-CRYPTO-SITEA access-list traffic for SiteA to SiteC through a Tunnel between A - B

  access-list L2L-VPN-CRYPTO-SITEA ip 192.168.3.0 allow 255.255.255.0 192.168.1.0 255.255.255.0

  Note L2L-VPN-CRYPTO-SITEC access-list traffic for SiteA to SiteC through a Tunnel between B - C

  access-list L2L-VPN-CRYPTO-SITEC permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0

  Where

  • OUTSIDE-NAT0 = is the ACL to be used in the NAT0 rules that will exempt SiteA SiteC NAT traffic. It is this time tied to the 'outer' interface, as traffic will be coming in and out through this interface to SiteB
  • NAT = is the line of configuration NAT0
  • L2l-VPN-CRYPTO-SITEA (and SITEC) = are the ACL in the configurations of VPN L2L that defines the SiteA LAN to LAN SiteC traffic should use existing VPN L2L connections.

  Site C

  access-list NAT0 note NAT0 rule for SiteC SiteA traffic

  NAT0 192.168.3.0 ip access list allow 255.255.255.0 192.168.1.0 255.255.255.0

  NAT (inside) 0 access-list NAT0

  Note list-access-L2L-VPN-CRYPTO-SITEB SiteC to SiteA interesting traffic

  L2L-VPN-CRYPTO-SITEB 192.168.3.0 ip access list allow 255.255.255.0 192.168.1.0 255.255.255.0

  Where

  • NAT0 = is the ACL to be used in the NAT0 rules that will exempt SiteC to SiteA NAT traffic
  • NAT = is the line of configuration NAT0
  • L2l-VPN-CRYPTO-SITEB = LCA in configurations VPN L2L that defines the SiteC LAN to LAN SiteA traffic must use the VPN L2L existing SiteB

  To my knowledge, the foregoing must manage the selection NAT0 and traffic for VPN L2L connections. Naturally, the Interface/ACL names may be different depending on your current configuration.

  Hope this helps

  -Jouni

• Copy the text from the online site created by muse

  Hey,.

  People can not copy the text of some sites created by Muse?

  Is it because I chose the wrong police at my site?

  Best regards and thank you

  Tom

  In addition, you use system fonts?

  System fonts allow you to use the typography more unique, based on specific fonts (the Designer) have installed on your machine. For example, if you design a site that has a specific theme, such as a gardening site, you can install a unusual flower font that is not available in the web fonts Typekit library. It's good to apply sparingly system to the text fonts, but keep in mind that the text content will export as images. This means that the page takes longer to load and visitors will not be able to select, copy, or paste the text of the page. System fonts are also better suited for small pieces of text, such as headers. To make the site easy to use, avoid using fonts system for addresses, phone numbers and any content visitors can copy and paste in a calendar or e-mail message. Don't forget that some visitors have difficulty reading the text smaller and can set the browser to increase the size of the police; but this strategy won't help to read the text that is exported as image files. Remember that the search engines index text content search sites to define a site's ranking in search results. For these reasons, it is best to only apply the system fonts when you really need have an impact on the design. If there is a comparable web or Standard police, apply this police instead.

• Conversion of a MS Expression Studio Dreamweaver Web site

  My website, www.mrelativity.net was designed by me in 2002 using MS FrontPage.  Over the years I updated to the latest software of design site Web MS ending by the current Expression MS s Studio Microsoft no longer supports any of these applications to Web site design.  It would be easy to convert my site must be hosted on a windows server to a Dreamweaver Web site?  And, is the Dreamweaver application similar to the MS Expression Studio in use, or I have to go through a process of training all along.  Note: The content of the Web site would not change.

  Are there web sites designers that make these kinds of conversions, and if so, what would be the cost?  In the latter case, please understand that, in the end, I must be able to manage and update the website myself, without any additional help.

  Joseph A. Rybczyk

  I don't sugar coat everything.  DW assume you have at least a rudimentary knowledge of the basics of design & web code in HTML, CSS, and to a lesser extent JavaScript.   The GUI in DW to do many things without even looking at the code.  But for the advanced features, you need to work with the code from time to time.

  SERVERS: DW does not care that you use the servers.  For static HTML files, it is not much either.

  • Win plans of IIs costs slightly more than Linux.
  • Win has a panel of Plesk IIs.  Linux has a C-Panel.
  • Win IIs supports ASP.net code while Linux supports PHP code.

  FTP: DW can FTP the files to your server remotely on your local hard drive, & vice versa.

  Simply define a Site going on Site > new Site. Say DW where you want to store your files from local site. Example: C:\yourSiteName.

  Under servers, enter your FTP credentials & root directory (this varies depending on the provider).

  

  Nancy O.

• How can I import an entire Web site in dreamweaver using an IMAC?

  How can I import an entire Web site in dreamweaver using an IMAC?

  It doesn't matter which computer you use, as long as it meets the requirements of the specification for Dreamweaver (as almost certainly does an iMac).

  You define a site in Dreamweaver and set up the connection information for the remote server. You can then connect to the remote server and download the pages of the site and other assets, such as images. The following video shows how to define a local site define a site in Dreamweaver. Adobe Dreamweaver tutorials CC. There is a separate video on the remote server configuration: put in place the server connection information. Adobe Dreamweaver tutorials CC. The second video requires that you have created the site locally, but the details on setting up the connection information for the remote server are the same.

• Load the Web site to a remote server in Dreamweaver CC 2015

  Dreamweaver CC 2015, what are the steps to load your site (folders and files) to a remote server specific? I've already implemented the information on each site server. And I am able to connect to the remote server. I just can't understand how to load the sites on the server.

  
  

  Thank you.
  

  Hello

  Please see the links below which explains how to define a site, server and how local files to the server.

  Publish your Web site. Adobe Dreamweaver CC tutorials

  https://helpx.Adobe.com/Dreamweaver/how-to/publish-manage-websites.html

  Please do not hesitate to get back to us if you need help for the same.

  Concerning

  Vivek

• I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  Hello

  You must define a site in Dreamweaver and need to set up your FTP server. One for that, you can connect with the FTP server where your FrontPage is loaded and you can get the copy of the said locally.

  Link below explains how.

  Define a Site in DW

  Define a site in Dreamweaver. Adobe Dreamweaver CC tutorials

  https://www.YouTube.com/watch?v=sHAvSbdRgu8

  Connection to the FTP server

  https://helpx.Adobe.com/Dreamweaver/using/connect-remote-server.html

  Using Dreamweaver | Edit an existing remote Web site

  Concerning

  Vivek

• How to create a site for recruitment and employment in Dreamweaver?

  Anyone know how I can create a recruiting Web site? Where users can find, apply for jobs etc.?

  If you are just looking for how to start working with DW (sorry, don't know if you've already used it) and php, two milestones you can't ignore are...

  (1) define a Site: GS-01: defining a new site | Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  (2) setting up your test server: helps Dreamweaver | Set up a test server

• My upload site does not look like the preview

  I used the model 398 of nature to make a new website (using DreamWeaver). Everything was going well until I downloaded the files on the server. Here's the overview:

  

  Here's what it looks like now that I have uploaded to the server:

  

  Any suggestion would be appreciated!

  When you define a Site in DW, you keep all the files of your site in a local root folder. When you download on your server, you move the content of the root of your local to the root folder of the server.

  In fact, apart from a few possible "server only" files/folders (like the cgi - bin folder, for example), your local site and the remote site directory structure must match exactly.

  So, if you have your .css files in a folder called css that is located on the same directory level remote your page index.html locally, the .css files must also be found in a folder css on the same remote directory as index.html page level.

• I just reinstall dreamweaver on a new pc.  How can I xfer site definitions

  OK, so I have an existing ftp server, I put.

  I had to uninstall and reinstall on a new computer now.

  How can I transfer site definitions and what extenisions and where are they located?

  That's the problem.  You must export site definition settings before uninstalling DW.  I hope that you did at one point and saved the .ste files to a safe place - either on your hard disk, external hard drive or outside the root on your remote server.

  If no .ste file have been exported, you must manually set the sites in your new installation by going to the Site > new site.  When you have finished defining your sites, don't forget to export STE files and save them in a good place

  Nancy O.

• Editing an old existing site?

  DW editable to an existing Web site. It's a site 10 year and liked it, as I believe that it was built with Dw I have access to all the web files. Can I download the HTML etc. and change the Web site? www.fencesupplyonline.com

  Yes. Simply define a site in DW, using the FTP connection to the old site information, sign in to the site, download all files and change now.

• How to import my GoLove sites in Dreamweaver CC?

  Hello

  There is nothing much to import.  Simply define a site in DW by going to the Site > new Site.  Say DW where on your hard disk to find the files of your GoLive Site.  See screenshot.

  

  Since GL generated code that does not meet web standards current and used exclusive stuff that is not supported in DW, you will need to clean things up a bit and to find replacements for the automated functions or extensions, you may have used in your GL site.

  Most people find that it is cleaner in the long term to rebuild just their site in DW.  Start with a new layout - new > blank page > HTML.  Select a layout in the 3rd Panel & hit CREATE.  SaveAs index.html.  Repeat for other pages of the site.

  Then it's just a matter of copy & pasting old content in your new layout of the site.

  Good luck!

  Nancy O.

• I can turn a small WordPress site into a static site I edit in dreamweaver

  We have a customer who wants their revamped site. It is a small site on WordPress.com. I know that you can create static pages, but I don't see anything that allows you to transform existing pages in more static. Is it possible in Dreamweaver that we can open the site and convert.

  Let's not waste time, arguing the merits of Dreamweaver v. WordPress. I just need an answer.

  No, there is no automagical button in DW to do this, but, you might be thinking more than it anyway.

  You can simply copy the source code of the page (the page of final output sent by the server to the Viewer) online and who bring in DW as a new page. Then it's just a matter of copying the images, javascript and css files and and their restoration of links.

  EDIT: You define a Site in DW first, if you have a place to record the pages and the dependent files, if you have not already: GS-01: defining a new site | Learn Dreamweaver CS5 & CS5.5 | Adobe TV