Defining a router and 2 switches in a network

Similar Questions

• Can ping the router and the computers to the network, but not beyond router

  I have 2 computers in linux and 3 Windows XP computers.  All can ping the router and inside my network.  Anyone can browse the internet.  None can ping outside my network (google.com or its IP address) if connected directly via the switch or router.  Traceroute shows stopping at the router.  Router firewall is disabled.  Ping on the router tool not working anymore. Linksys WRT54G Router is and I've just updated to firmware 4.21.1 but the old firmware is has never worked. I use 192.168.1.1 for the router.  Linux has some IP fixed all the other usind DHCP.  ISP is a provider of mobile phone to the modem.  Just like cable or DSL, I guess.  I've looked everywhere with no solutions.  Anyone have any ideas?

  Yes, contact your ISP to get it resolved.

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Routing between a router and a switch L3

  Hi I have a question where I have two sites we try to connect through an ethernet port. In site 2, I use the port of gig0/0 on router 1941 and configured the port as such:

  interface gig0/0

  IP 192.168.18.2 255.255.255.252

  IP route 10.0.4.0 255.255.255.0 192.168.18.1

  site 2, I use a switch 3750 because I have no port available on their router together and is configured as such:

  interface FastEthernet4/0/1

  No switchport

  IP 192.168.18.1 255.255.255.252

  IP route 172.20.0.0 255.255.0.0 192.168.18.2

  Although the two ports appear as more and I can ping their interfaces locally, I can not ping interfaces aside until now neither their networks.

  I tried changed the front door of the local interface, but that does not work either.

  The carrier claims that I must have on one vlan and suggested this config on site 1:

  Interface gig0/0,955

  encapsulation dot1q 955

  IP 192.168.18.2 address 255.255.252

  And there is the problem.  I can not configure a subinterface on the L3 switch and cannot add the vlan as they recommend.

  Any suggestions from anyone on how to connect the two sites?

  Thank you

  Pete

  The real port must be configured as a trunk because of the end of the router. If so -.

  (1) create a vlan 995

  (2) configure the port as trunk but don't allow that vlan 995 on it

  (3) create IVR and IP migration

  Jon

• Configure the DHCP on the router and switch

  Good afternoon

  I'm trying to set up DHCP using CLI on a 2610 router and switch 2950.  With my current config, the host at the end of the switch (set to receive ip via DHCP) does not have anything assigned.  Here are a few shows:

  Router:

  Router_1 #show ip int br
  Interface IP-Address OK?   Method State Protocol
  192.168.10.1 FastEthernet0/0 YES manual up up (leading to pass)
  Serial0/0 YES no not defined administratively down down
  Serial0/1 no YES not defined administratively down down
  Ethernet1/0 YES no not defined administratively down down
  Ethernet1/1 no YES not defined administratively down down
  Ethernet1/2 no YES not defined administratively down down
  Ethernet1/3 no YES not defined administratively down down

  Router_1 #show ip dhcp pool

  Pool acer_pool:
  Brand usage (up/down): 100 / 0
  Size of the subnet (first/next): 0 / 0
  Total addresses: 254
  Rental addresses: 0
  Waiting for the event: no
  subnet 1 is currently in the pool:
  Range of addresses IP of Current index leased addresses
  192.168.10.1 192.168.10.1 - 192.168.10.254 0

  Switch:

  Switch_1 #show ip int br
  Interface IP-Address OK?     Method State Protocol
  Vlan1 unassigned YES NVRAM up up
  FastEthernet0/1 no YES unset upward, upward (leading to the router)
  FastEthernet0/2 not assigned YES unset down down
  FastEthernet0/3 not assigned YES unset down down
  FastEthernet0/4 not assigned YES unset down down
  FastEthernet0/5 not assigned YES unset down down
  FastEthernet0/6 not assigned YES unset down down
  FastEthernet0/7 not assigned YES unset down down
  FastEthernet0/8 not assigned YES unset down down
  FastEthernet0/9 no YES unset down down
  FastEthernet0/10 not assigned YES unset down down
  FastEthernet0/11 no assigned YES unset down down
  FastEthernet0/12 not assigned YES unset down down
  FastEthernet0/13 not assigned YES unset down down
  FastEthernet0/14 not assigned YES unset down down
  FastEthernet0/15 no assigned YES unset down down
  FastEthernet0/16 not assigned YES unset down down
  FastEthernet0/17 no assigned YES unset down down
  FastEthernet0/18 no assigned YES unset down down
  FastEthernet0/19 not assigned YES unset down down
  FastEthernet0/20 not assigned YES unset down down
  FastEthernet0/21 no assigned YES unset down down
  FastEthernet0/22 YES no assigned unset upward, upward
  FastEthernet0/23 not assigned YES unset down down
  FastEthernet0/24 no assigned YES unset down down

  What other info I can provide to solve this problem?

  Thank you.

  I think that you need to configure the router-on-a-stick.

  Post your DHCP configuration.

• How is the best way to connect the configuration of my router and switch?

  I have a cable modem. connect to a switch, I have 2 computers connected to the switch. I also just connected my router wireless switch. That's the best configuration or I lose my firewall of the router in passing is not by ports directly above?

  Most of the cable modems will give an IP address, so connect a switch to the modem and then connection of two computers and a router to the switch will usually result in one of these three devices, get an IP address (and internet connection), while the other two will not be.  (Notice that I guess a true "Modem" and not a "Modem/Router" device).  The correct configuration would be to connect your router to the modem (router gets the unique IP address).  The router can then process from the addresses IP what either side LAN of the router, then plug the devices you need (including switch) to the router's LAN ports.  This also ensures that all devices will be on the same subnet that your connection scheme to separate devices on the router wireless from the other two devices on the switch (here, assuming that you have a router/Modem device).

  HTH,

  JW

• Need router and switches for simple network tips...

  I have to get a new router and switch to an office with 9 computers, 1 printer, and a server.  They are all Mac computers. Two Mac computers are running Windows XP through Parrallels (not sure if it matters).  All computers have just need access to the Internet (through the router), access to the printer and 5 of them on the server.  A few more important details: the router will be located about a quarter of a mile away (where we could get a broadband Internet access) but will have a fiber optic cable running to the office, where will be the selector. In the building off site where the router, we would like to have a backup disk to send important files at the end of each day (or set up to do this automatically later).  The optical fiber has capacity of the card.  We want that the router must be connected only (wireless).  Any suggestion that router and switch combo would be enough?  Thank you!

  You can use a RVS4400 router that has a gigabit capacity with 4 ports, connected to the gigabit switch.

• EIGRP running between the router and ASA by switch

  Hello

  Is that possible I can running an EIGRP between router and ASA by switch?

  Router and ASA connected to the switch with static route.

  Hi Tommy Chin.

  It is possible, we must advertise to the route between the router and ASA.

  Please provide your connectivity diagram to better explain.

  For example...

  interface GigabitEthernet0/0

  Description links to WAN router

  nameif OUTSIDE

  security-level 50

  IP 10.1.1.1 255.255.255.192 ensures 10.1.1.2

  Summary-address eigrp 100 10.1.0.0 255.255.0.0 1

  !

  Confiuration Protocol EIGRP

  standard access list eigrpACL_FR allow a

  !

  Router eigrp 100

  eigrpACL_FR distribute-list in the interface outside

  neighbor 10.1.1.3 OUTSIDE interface

  neighbor 10.1.1.2 OUTSIDE interface

  Network 10.1.1.0 255.255.255.192

  redistribute connected

  redistribute static

  !

  Kind regards

  Srinivas.

  Note: if it solves your problem it mark it as resolved.

• NAT router 1841 and 3550 switch help

  Hi experts, I need some help with setting up a network.  Network diagram is attached.

  I created 3 VLANs on the 3550 Switch and activated InterVLAN Routing.  I can't do a ping from one VLAN to another.  I've added static routes to networks VLAN on the router.  Is the only part I'm not sure where and how configure NAT?  For example, if it was just a standalone router Cisco 1841 I would just create list of access and NAT FA 0/0 outside and FA 0/1 on the inside.  It would be great if someone can give me an example or point me to the right direction.

  Router ISP--> Cisco 1841--> Switch Cisco 3550

  Cisco 1841 router:

  FA 0 / 0--> WAN Interface

  IP address: 30.20.10.2

  FA0 / 1 Interface LAN connected to the 3550 switch-->

  IP address: 10.0.0.1/24

  Cisco 3550 switch:

  FA 0 / 24--> to connect to the Cisco 1841 router

  IP address--> 10.0.0.2/24

  FA 0/1 - 0 / 10--> VLAN 1

  FA 0/11 - 0 / 20--> VLAN 2

  FA 21/0 - 0 / 23--> VLAN3

  Thank you

  Hello, it's the same thing, but in your access list, you need allow all of your internal address ranges. On your router and 3550 make sure routing everything is OK, you say you have connectivity.

  This means that your network 10 should be able to get to your 192 networks and vice versa.

  On your 3550, you can have a default route to the router. And your router should have roads to 192 networks via the address 10 of the 3550.

  Then the NAT configuration

  Int fa0/1
  IP NAT inside

  Int fa0/0
  NAT outside IP

  IP access-list standard MYNAT
  Permit 10.0.0.0 0.0.0.255
  Permit 192.168.1.0 0.0.0.255
  Permit 192.168.2.0 0.0.0.255
  Permit 192.168.3.0 0.0.0.255

  And then in your NAT statement

  IP NAT inside source list MYNAT interface fa0/0 overload

  Hope this helps

  Sent by Cisco Support technique iPhone App

• Wireless network connection - stay connected in our linksys router and switch to a connection TataraTmp

  We have a wireless network connection, but it will not stay connected continuously, it switches to another network, called TataraTmp, and it won't let me delete or reset the settings.  Can someone tell me what it is and how do I get rid of him?

  Thank you

  just uninsralled o2 connection manager and tatara tmp disappeared, so his tied up with the o2 connection manager I did as the connection manager as it shows the use of services to mobile broadband, but I fear its useless if he messes about connect me to my router home as tatara tmp thanks o2

• a router and a modem to connect together, but the computer said two drivers

  I want to get my wireless to the top quick cuz his bull press

  Hello

  We really need more information and description of the problem other your wireless network does not work.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ----------------------------------------------

  Cable or another modem - router - wireless connection on computer?

  Restart the computer to clear any corruption.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  Also check with the site of the manufacturer of your router because they generally excellent help on the spot.

  ============================================

  To solve the problems of the network:

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I have
  would update your WiFi drivers on computers. How you are positioned in the router?
  Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
  stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If Windows Update suggests a just HIDE
  because they are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
  DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Connect 6224 VLAN routing and management VLAN

  Happy holidays all the world-

  I read several posts here and elsewhere on the inability of the 6224 to deliver its own management interface. OK, enough, I get it. But what I don't understand is a practical solution to what seems to be a huge problem if you want to use the network to connect to the device to manage (instead of the serial console port).

  Let's say I want to have three networks A, B, and C on the 6224 and configure it to route between any combination of them. Let's call them VLANS 1, 2, and 3. Three ethernet cables will connect to three ports on the 6224. for the network A, b and C. Let's just ignore shifts and redundant connections to do this.

  The management VLAN can not be assigned to one of these networks, right? He said in the documentation, and it turns out if you try to do it on the configuration of the switch. It doesn't let you do.

  So, how do you reach the 6224 for management? Create a fourth network, VLAN 4? This seems to be the general theme of the answers to questions like that, but how do you reach this seemingly isolated network? By definition, it cannot be routed. Any computer that you normally use on A, B or C, can not reach D.

  So what then? A dedicated computer for D who cannot reach the other thing than the switch management port? What about another completely separate router (I have a Cisco ASA with some ports to spare, or a hint of irony, an another 6224!) to provide a connection between D and a networks normally used? This is crazy.

  Of course, missing me something here. I can't believe that the answer is, 'If you enable routing, the management interface is essentially unusable"but that's what it looks like, from my possibly twisted point of view. I want to have my laptop computer and any other computer, sitting on a network that can be put to rout by the 6224, and for that same laptop also be able to reach this same 6224 management interface.

  Someone please help me understand this?

  Thank you

  Chris

  PS: I have an email address. It is almost unique on the entire planet. I use it to connect to this forum. But Dell, like so many others, insists on ignoring these facts and let me create an another unique identifier while playing a game of 20 questions. That's why my remarkably stupid random username.

  Thanks again, and I hope that someone gets at least a good laugh over this.

  Vlan management can be considered as a port OOB. If the intention is that it be separated from the rest of the traffic and on its own dedicated network. However, you are not limited to manage the switch through just the interface vlan management. Each VLAN with an IP address can be used by customers in this vlan to manage the switch.

  For example, if you assign a VLAN 2 address and ip 192.168.2.1. Customers in VLAN 2 with and the 192.168.2.x subnet ip address can access 192.168.2.1 to manage the switch, while being able to communicate with clients in other VLANs.

  I hope this helps some, let me know if you need help on your config, or to specify anything.

  Thank you

• 800 series Router and ASA will not create a tunnel

  Hey everybody, what had confused me for a week now, and I feel that it is something small that im overlooking. My 800 router and my ASA will not pass traffic through a VPN. Here are my configs (less sensitive data of course). I also removed irrelevant data to narrow down the config.

  800 series router:

  DHCP excluded-address 192.168.2.1 IP 192.168.2.100

  !

  IP dhcp pool internaldhcp

  network 192.168.2.0 255.255.255.0

  x.x.x.x where x.x.x.x DNS server

  default router 192.168.2.1

  !

  !

  IP cef

  no ip domain search

  domain IP (domain here)

  Server name x.x.x.x IP

  Server name x.x.x.x IP

  No ipv6 cef

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  address key (password) crypto isakmp (ip WAN of ASA)

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac 3des-sha

  Crypto ipsec transform-set esp-3des esp-md5-hmac 3des-md5

  Crypto ipsec transform-set esp-3des esp-md5-hmac distance

  !

  !

  map KentonMap 1 ipsec-isakmp crypto

  defined peer (ASAs WAN IP)

  the value of the transform-set 3des-sha

  match address 110

  !

  !

  !

  !

  !

  interface FastEthernet0

  no ip address

  !

  interface FastEthernet1

  no ip address

  !

  interface FastEthernet2

  no ip address

  !

  interface FastEthernet3

  no ip address

  !

  interface FastEthernet4

  Description outside the int

  (Local WAN) 255.255.255.252 IP address

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  card crypto KentonMap

  service-policy output VoiceLLQ

  !

  interface Vlan1

  IP 192.168.2.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  Fair/fair-queue

  !

  !

  IP nat pool insidepool (WAN IP) (WAN IP) netmask 255.255.255.252

  IP nat inside source list 100 insidepool pool overload

  IP route 0.0.0.0 0.0.0.0 (Next Hop)

  !

  access-list 100 permit ip 192.168.2.0 0.0.0.255 any

  Note access-list 110 VPN ACL

  access-list 110 permit ip 192.168.2.0 0.0.0.255 192.168.24.0 0.0.0.255

  !

  The ASA config:

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.24.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  (LOCAL WAN) 255.255.255.252 IP address

  !

  permit same-security-traffic intra-interface

  IP 192.168.24.0 allow Access - list extended sheep 255.255.255.0 192.168.2.0 255.255.255.0

  Access extensive list ip 192.168.24.0 LimatoKenton allow 255.255.255.0 192.168.2.0 255.255.255.0

  OutsideIn list extended access permit tcp any interface outside eq 3389

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 192.168.24.0 255.255.255.0

  Route outside 0.0.0.0 0.0.0.0 (Next Hop) 1

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp-sha-hmac 3des-sha

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto LimaMap 1 corresponds to the address LimatoKenton

  card crypto LimaMap 1 defined peer (800 WAN router)

  card crypto LimaMap 1 the value transform-set 3des-sha

  LimaMap interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 1

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  tunnel-group (800 WAN router) type ipsec-l2l

  tunnel-group (800 WAN router)

  IPSec-attributes

  pre-shared key *.

  ISAKMP crypto release:

  ASA

  Type: L2L role: initiator

  Generate a new key: no State: MM_ACTIVE

  Router

  DST CBC conn-State id

  (Local WAN)    (ASA WAN)   ACTIVE QM_IDLE 2003

  Hello, Benjamin.

  I guess that your router does NAT same for site traffic to site.

  So, you have to deny traffic between ACL 100 sites.

  PS: If this does not resolve your problem, could you please share isakmp/ipsec its on both sides?

• Why my xbox getting kicked out of router and sometimes subsistence have limited connectivity

  I have an Xbox 360 that works on all other routers very well so I know very well that this is not my wireless card. When sharing the internet threw a computer to the same router there is no problem. the computer uses a wireless card. so I do not understand why the computer share internet with a xbox there is no problem with the router but the Xbox connection it itself using a wireless card (and the Xbox is still closer to the router to the computer) has horrible problems such as disconnection without reason. and sometimes the connection and all I can do is communicate with fried but nothing else. and this is a new router because the other was replaced because he was falling packages. This new router is now a RT-AC66R. It's actually pretty cool, I can walk like three blocks away and still have the wifi on my phone. My xbox is about ten feet away from him and the computer is about fifteen feet away. and now my new problem is that I can run is no longer an Ethernet cable to the computer to share internet. because the computer sees the xbox but xbox does not see the pc. or rather the xbox has failed the test of pc. and also, I can share is no longer my internet with another pc. I changed the map from one pc to the other wireless and connect the pc with the wireless card without problem. and this is supposed to have an incorrect ip address. and if you return it the problem are the same now that with the wireless card works, but cannot share internet with each other. and before there was no problem of internet sharing. but I could see the other pc also not one way or another. I solved this problem and now the PC can not only see each other they can copy cut and delete files on the other pc and the media. but it's when I can share is more of the internet with the xbox. and now the xbox can not see ether pc. and I thought that was the problem, so I disabled the sharing and then it still doesn't work. I have even made the system restore and that did nothing. I have been reading forums for two days now and no help no one has the same problem as me. a pc is Windows 7 Professional and the other is running Vista Edition family Basic. Please someone anyone help me im going nuts. I'm about to get a switch, so I don't have to keep switching the ethernet cord so I can have only two things in line at a time. I have also in the future will get a long enough cord to plug the switch directly to the router. but don't have the money to do it right now. I live in a motel and already got in trouble for my landlord to reset the old default router so I could do better for my system. then I told her that it was dropping packets. then he replaced. and set up a cage to stop me reset it. but all I have to do is with my finger tilt it upward and I access to the reset button. I have to pay for the internet service and am really frustrated because I tell him something is wrong, but he thinks that his fine because he bought a new router. But if my xbox is still having the same problem do you think it might be the cable from router to the modem Ethernet. but the new router does not drop to all packages and it works beautifully when he wants to. Sometimes it stops just to put a signal and it will stay like that for hours. even unplug for 30 seconds and in him plugging back in does nothing. or do you think it is because it has only a limited number of ip addresses available and put them to save to say ten days instead of one. because by resetting my wireless card and other peoples computers also reset the wireless card when they have problems connecting or it ask for a new ip address. that such use then upwards of all spaces allocated for the connection? I don't know it's just a theory of reading the forums if it's wrong to death someone please let me know. also, I asked another question about the before samething but DK if I explained myself well in the issue of ether, because I'm so tired that I have a bad typeing it drives me crazy I want to just reset the router by default so that I can access it Web page. so, if you can help me that would be awsome is the other post.

  I have a network administrator who do not want to enjoy internet that we pay to help please

  I have trouble getting my computer to share its internet connection with another computer and an xbox. I had their work and now the xxbox. I had their work and now the xbox can even see the computer and the other computer which is running vista and continues to indicate the ip address is incorrect. I live in a hotel and already had introuble for reset the router to the default password, so I can fix the parameters. but now he baught a new router and put a cage around him so he can not be reset to zero and the computer sharing wireless internet runs 7. and the xbox can sometimes connect to the router but keeps having started from, or sometimes it says that some live content xbox is not available. I know this isn't the xbox wireless card because it works on all other routers very well. and as I shared a connection with the computer vista very well before now, it won't work at all. can someone help me please?

  Hi the dArKsTaR,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to connect connectivity Xbox Wireless.

  Try these steps and check if the problem persists.

  Step 1:

  You can try the steps described in the links below and check if they help to resolve the issue.

  Xbox 360 Wireless Controller: Controller disconnects or is unable to connect to your console

  http://support.Xbox.com/en-us/pages/Xbox-360/troubleshoot/Xbox-360-top-issues/wireless-controller-disconnects-frequently-or-cannot-connect.aspx

  Xbox 360 Setup

  http://support.Xbox.com/en-us/pages/Xbox-360/get-started/console/default.aspx

  Step 2:

  If the steps in the link above does not help then you can post the question on the link for assistance on the number below.

  With the help of my console

  http://forums.Xbox.com/xbox_forums/xbox_support/f/7.aspx

  Alternatively, you can contact the technical support team of Microsoft XBOX that the issue may be with the material.

  http://support.Xbox.com/en-us/pages/contact-us.aspx

  http://support.Xbox.com/en-us/?XR=shellnav

• NSX design with cisco UCS/fabric interconnects and Nexus switches

  Hi Experts

  I am new to NSX design and deployment and working on a project. We deploy NSX for applications of level 4 (web, app, db, DC). I use logic, DLR, ESG and DFW switches. I next we intend to use roads static confusion..

  1. do we cover all the VLAN from the virtual to the physical environment? for example mgmt VLAN, level vlans(web,app,db), vxlan transport vlan or it should be only a VLAN specific?  which means would be I have set all the VLANS in environment NSX in my physical switching environment?

  2 vds? don't we create not only 1 vds initially during the deployment of vcenter or more? Should we take any special consideration while deploying to the deployment of the NSX?

  3 static routes - we configure static routes on the DLR and the GSS? Should I use the default routes upstream? on the physical router should we be routing all subnets from virtual environment to the GSS.

  4. where and who should create virtual machines? Via vCenter or before the deployment of the nsx NSX?

  5. we have a level of domain controller. Should it be part of 3 or separate applications with allow any any rule on DFW?

  Thank you

  Sam

  (1) the VLANs which exist for physical Machines span the logical switch VXLAN NSX in the following cases:

  • If the current deployment there are physical Machines in the same Vlan and subnet IP with Virtual Machines. If this common Port Vlan group is migrated to a switch logic VXLAN Backed port group and not possible to change the IP addresses of the virtual machines, and then a bridge DLR (Distributed logical router) works as the conversion between Vlan physical and virtual VXLAN
  • If Conversion of P-to-V of the physical Machines continue on this Vlan

  VLAN which cover only the virtual machines or virtual local networks which cover only physical Machines must not be delayed.

  (2) for the deployment of the NSX, there may be more than 1 dVS or only 1 vDS according to the design. There may be another type of traffic other VXLAN base of virtual machines such as backup, storage, VMotion and the overall design, management, best practices apply here as well.  A requirement of the NSX is a common VDS that spans the entire Cluster. For each Cluster, this "common VDS' may be different. Yet once this VDS maybe a separate VDS dedicated VTEP or VTEP features functionality can be added to the existing VDS. It may be best to separate the VTEP vDS.

  (3) for the DLR, a default gateway is usually sufficient. If static routes are used, the GSS must then drive by default upstream and the static routes with the next hop of the DLR downstream for the subnets in the subnets IP VM logical switch. On the physical router static route to the VM, but also DLR - ESG logical subnets Subnet switch is required. Management of static routes is easier if route summarization is possible, or if necessary, close to the IP subnets, so it may be a good idea to use the dynamic routing such as Ospf or BGP protocol. There are also features of IP address management in Vrealize and other IPAM solutions if Automation is necessary for large and dynamic environments.

  (4) NSX has no functionality in the creation of the VM, it only creates Services network such as switches, routers, Firewalls, Load Balancing. The creation of the part VM continiues the same way as before. A point to note is maybe the logic is created appear as VXLAN named port groups on the VDS. NSX Manager creates groups of ports on the VDS, the only difference is that the name includes VXLAN. The virtual machine is like before added to this group of VXLAN Backed Port settings, or added to the logical switch from NSX Manager interface that appears again as a Plugin for VCenter. VCENTER is so point to create virtual machines and add these VMs to the logic is.

  (5) level of domain controller can be a separate layer, or other third party, may be preferable to upgrade separated except 3 applications. Usually, it's the same design without NSX. dFW rules can help protect the domain controller with allowing only ports of the virtual machine or physical Machines being admitted. dFW rules can apply to VXLAN based logical switches NSX so that VLAN based DVS Port groups because it's the kernel module.