How is the best way to connect the configuration of my router and switch?

Similar Questions

• What is the best way to connect the pipes to Labview? DDE or OPC

  What is the best way to connect quizix pipes to labview?

  Pipes share data by using Dynamic Data Exchange (DDE), which is the best way? To use an OPC server between labveiw and pipes or DDE?

  If the program manages DDE communication the best way is via a DDE, as LabVIEW handles this. Otherwise, you will need to add another instance (OPC Server) system that will make it more complex and causes more load.

  See the previous link to the words 'to the help of LabVIEW as a DDE Client'.

  -Tom

• Best way to connect my computer to computer outside

  What is the best way to connect to my server from 14 Filemaker from an outside computer.  Both computers to run OS10.11.  Team Viewer is the only way I just need to do one or two weeks a year, in order to access the program.

  You can use any service remote desktop, such as VNC, Apple Remote Desktop, etc.

• best way to connect two PC 2748 s?

  I just upgraded our office in two PC 2748 s (while still also using one of our PC 2324 devices) and I would like to know the best way to connect these three switches.

  At the present time, I have a cord Ethernet connecting each of the 2748 s via the 49 port and then another cord ethernet connecting the 2324 to the 50 of my first 2748 port (which has our main file server and the outgoing Internet connection on it, among other things).

  Should I also connect the 2324 to SECOND 2748 or is asking for disaster? Also, is there an advantage to invest in GBIC modules for the two 2748 s so that I can connect this way or this advantage of flow occurs only when connecting a 2748 to another device (i.e. There is no speed advantage when only connecting two 2748 s together)?

  Thanks in advance for your clarification...

  
  

• How can I keep strangers to connect to my network or router?

  wireless router...

  How can I keep strangers to connect to my network or router?   I continue to see one come like Belkin.678 and when I right click on it the only option is auto connect...

  How do you know that they are connecting to your wireless network?

  Where are you looking?

  You should consult your routers manual and make sure that wireless security is put in place.

  Use WPA2.

  Looks like you're just view the wireless networks that are available in the range of your router.

  It's normal.

• Configure the DHCP on the router and switch

  Good afternoon

  I'm trying to set up DHCP using CLI on a 2610 router and switch 2950.  With my current config, the host at the end of the switch (set to receive ip via DHCP) does not have anything assigned.  Here are a few shows:

  Router:

  Router_1 #show ip int br
  Interface IP-Address OK?   Method State Protocol
  192.168.10.1 FastEthernet0/0 YES manual up up (leading to pass)
  Serial0/0 YES no not defined administratively down down
  Serial0/1 no YES not defined administratively down down
  Ethernet1/0 YES no not defined administratively down down
  Ethernet1/1 no YES not defined administratively down down
  Ethernet1/2 no YES not defined administratively down down
  Ethernet1/3 no YES not defined administratively down down

  Router_1 #show ip dhcp pool

  Pool acer_pool:
  Brand usage (up/down): 100 / 0
  Size of the subnet (first/next): 0 / 0
  Total addresses: 254
  Rental addresses: 0
  Waiting for the event: no
  subnet 1 is currently in the pool:
  Range of addresses IP of Current index leased addresses
  192.168.10.1 192.168.10.1 - 192.168.10.254 0

  Switch:

  Switch_1 #show ip int br
  Interface IP-Address OK?     Method State Protocol
  Vlan1 unassigned YES NVRAM up up
  FastEthernet0/1 no YES unset upward, upward (leading to the router)
  FastEthernet0/2 not assigned YES unset down down
  FastEthernet0/3 not assigned YES unset down down
  FastEthernet0/4 not assigned YES unset down down
  FastEthernet0/5 not assigned YES unset down down
  FastEthernet0/6 not assigned YES unset down down
  FastEthernet0/7 not assigned YES unset down down
  FastEthernet0/8 not assigned YES unset down down
  FastEthernet0/9 no YES unset down down
  FastEthernet0/10 not assigned YES unset down down
  FastEthernet0/11 no assigned YES unset down down
  FastEthernet0/12 not assigned YES unset down down
  FastEthernet0/13 not assigned YES unset down down
  FastEthernet0/14 not assigned YES unset down down
  FastEthernet0/15 no assigned YES unset down down
  FastEthernet0/16 not assigned YES unset down down
  FastEthernet0/17 no assigned YES unset down down
  FastEthernet0/18 no assigned YES unset down down
  FastEthernet0/19 not assigned YES unset down down
  FastEthernet0/20 not assigned YES unset down down
  FastEthernet0/21 no assigned YES unset down down
  FastEthernet0/22 YES no assigned unset upward, upward
  FastEthernet0/23 not assigned YES unset down down
  FastEthernet0/24 no assigned YES unset down down

  What other info I can provide to solve this problem?

  Thank you.

  I think that you need to configure the router-on-a-stick.

  Post your DHCP configuration.

• The best way to connect 2 the application of ADF database servers?

  Until merge us the databases, I have a situation where I need to connect and to interview the two different databases. If the number of declaration is < 9 digits, use DBConn1, otherwise use DBConn2.
  
  I thought to use two modules of the application, but how would pass between the two connections in the code, let's say, a command button from the user interface with links?
  
  Is this possible at all?
  
  Thank you
  
  John

  In any case, you will need different display objects to query different data.

  The easy thing would be for create you to choose a database as the main one and in this database, DB links to the database. Then create a synonym for the table in the database, and then build your second view object against the synonym for the link to the DB.

  It is the best way to achieve your goal.

• What is the best way to connect a time capsule from the airport to an existing dsl router?

  I have a Netgear D6300 router with built-in ADSL modem and I'm getting a time capsule from the airport. I thought to put the D6300 in Bridge mode and connect the TC via a ethernet cable but my netgear router is kept in a metal TV armoire or I asked myself if I put on the floor and used to extend my existing wireless which is a little spotty on the floor, but I didn't know if the connection on the hard drive would be too slow. However I read in another post is no longer that apple supports the extension of networks of "no apple"?

  The time Capsule will connect to the Netgear router using a wired Ethernet cable connection, permanent... no matter how you decide to configure things.

  Regarding the location, Time Capsule can be located just about anywhere that it will allow an Ethernet connection. If you want to time Capsule to "extend" the wireless Netgear, and then configure the time Capsule to create a new wireless network that uses the exact same wireless network name and password than the Netgear router. The result will be a network of 'big '.

  Should be a lot more work, but assuming that the Netgear gateway can be configured to work as only a simple modem, the Capsule can be configured as the primary network router.

• Satellite M30: best way to connect to STEREO to listen to music

  What is the best way to export the music to an external stereo installation (by which the port or the connection output device)? Do I need devices additional periferal?

  Hello

  I use the small audio adapter like this one http://www.audiogear.com/cgi-bin/shopper.cgi?key=Adpt2Rf-Mnsp&preadd=action. The HIfI has generally to THE free line. This line, you can use to listen to music.

  It's also nice when I play games. I like it a lot.

  Good bye

• I want that my previous method of search bar back. Changed how update the search bar works now and I hate it!

  Latest update of Firefox changed how to search bar functions. This should NOT be done automatically without warning of a person on the changes. I have problems using this new method of research, and I hate it. I want than the previous method return. A contributor has tried to help him, I guess. But what he suggested did not work. I can't fix thru on Firefox. A window opens and does nothing. About Firefox does nothing, but look at me. I don't know how to enter the configuration of Firefox. I appreciate the-edmeister tried to help me, but nothing has changed. There, someone knows how to give back me my old search bar?

  It's not On Firefox's Subject: config as explained here:
  https://support.Mozilla.org/en-us/questions/1035119

• Cannot access the configuration of my router (wrt54g) page

  I can't access the page of my router (wrt54g) configuration after the installation. The router works fine, but whenever I try to connect to 192.168.1.1 it says the password is incorrect. The first time that I put up I changed the default user name and password and I thought I'd simply forgotten, so I reset the device. This time I don't change any of the default values, and I can not even log on. I have to reset it several times, and you're just annoying. Anyone know how to prevent it from happening? I thought it might be a firmware issue, but I can not find all downloads for my version of road ' rs (V8). I use a macbook pro, osx 10.9.2.

  My neighbor has pretty much the same question. Did some research and found many people with similar problems. Probably time for a new...

• Best way to import goods from Illustrator to animate and lot to day?

  My brother and I are working on an animation. I create drawings in Illustrator, and he creates animation to animate in CC. He needs to start the animation already, so I'm over him unfinished images, I intend to update several times throughout the project (Polish, redefine the colors,...). We are talking about hundreds of image assets. What would be the best way to implement, so we don't have to export and import each image manually?

  So far, everything I can think of creates all assets as the png. In this way he could-automatic update images easily (provide the size/Center does not change). But we would like to explore the possibility of retaining as well as vectors. Is there an easy way to import/export for this?

  If we decided to go with png, after all, and we have created big enough assets for all purposes, is there a downside? Would there be a loss of quality when the rotation and scale, rather than use vectors?

  Thank you!

  All the currently available features are documented in the work with Illustrator AI to animate CC files

• FRUSTRRATED. you will need to remove the Yahoo toolbar, remove BING and switch back to Google, open new windows in windows separte NOT tabs. Help, please!

  1. I didn't want Yahoo toolbar, but I can't get rid of it!
  2 need to change the new opening of the tabs in a single window several glass separte windows.
  3. somehow, BING has become my default page. How to return to GOOGLE?

  I also use the 3.6.19 version and do NOT want to upgrade to the new version of terrible. Please help thanks 3.6

  In the search bar, click on the little arrow, scroll down and choose "Manage search engines".

  In the menu next, click on Bing , highlight it, and then click Remove.

  If this answers your question, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same thing.

  Thank you.

• What is the best way to connect my iPad Air to my hifi amp?

  I'm wanting to connect my iPad Air to my hifi amp and want to know what is the best method, I am currently using a headset taking racial RCA connection.

  Music compressed on an iPad is not designed to be played on a stereo. It was the first question I asked when I got my iPad.

  You can use bluetooth speakers, it allows to be systems for iPhones from and now you can play music Apple on Sonos.See link below. for the Forum.

  Apple music on Sonos

• What is the best way to connect the Xoom to a desktop monitor?

  I would like to power mirror my screen xoom on a desktop monitor for presentations by small group to the site.  I've seen some of the threads on hdmi to vga, hdmi/DVI and hdmi to hdmi, but I'm a little confused as to what is easier.  It seems that if you go with hdmi to vga you will need some type of converter, not just a cable?  If it was just a cable that would be perfect.  In addition, another option would be to hdmi for display port (published in December 2010), has anyone tried this? Thank you!

  @uberpixels,

  I think the easiest way is using a HDMI output on the Xoom to an HDMI-> DVI Cable. or HDMI-> VGA Cable. I use an adapter at right angles (adjusted to avoid breaking), HDMI port which offers a complete female HDMI.

  Here's the thread on this adapter:

  https://supportforums.Motorola.com/message/401234#401234

  Then, connect a HDMI-> DVI Cable for the monitor. If you want to copy to VGA, you may need to add the + 5V using the applicator of tension mentioned in this thread:

  https://supportforums.Motorola.com/message/414527?TSTART=0#414527

  I have a portable DLP I use with the Xoom and choose to use a small HDMI-> VGA Converter that meets my needs. Here's a thread on this configuration:

  https://supportforums.Motorola.com/message/375995#375995

  -Doc