Defining the "Device Name" during activation of materials
What determines the "Device Name" in the list of devices enabled in the pool of development on the Adobe license site for the device licenses? Specifically for Macs... It doesn't seem to be the "Sharing of preferences..." pane
So, thought of it by myself. It seems that the serializer Adobe uses the local hostname to Mac. You can find that by going to the terminal and type "hostname". The host name gets initially fixed by any domain name that is assigned to the intellectual property. If neither is the case, it uses the share name in the sharing preferences pane. However, you can cancel and change the host name using the terminal (sudo scutil - set HostName mynewhostname.local). Deauthorize the unit on the Adobe site and reauthorize and it will appear as you wish. In this way, you can have the machine listed on the Adobe site, but you want rather than domain name. This is useful if you have a long list of machines and want to adjust their hostnames to their room number or location, etc.
Tags: Adobe
Similar Questions
-
The device name is displayed not in the newspapers of the Administration
I chose to have the R7000 email logs to me every night.
Unfortunately, I noticed that the newspapers do not include the name of the device as well as MAC and IP addresses for each entry.
I can see the device name in the genius of Netgear-> screen of connected devices, then why are they not available in the papers sent to me?
Thank you.
Oh! I apologize, but it does not include those.
What follows is the only will be included:
-
Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.
Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.
The download is from Microsoft so it's safe!
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
Phone is a Samsung SGH-A412. PC using Vista. I go to the Control Panel, Bluetooth, add wireless device, and then try to type the device name, but nothing happens. Tried to add a device, get a smaller screen with name & device Cat... Same thing, nothing happens, tried after clicking the name & device Catagory also. Phone search but can't find PC.
Hello
Generally, you should not have to enter anything to find a Bluetooth device.
Check out this link. http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device?SignedIn=1
Follow these steps and come back with results.
Hope that helps
-
What defines the reference name in a type library
I've created a DLL in CVI 9.1 for use with VB6. I used a function (.fp) workgroup file to define the functions exported from the DLL.
We add the DLL as a reference to the VB6 project, which allows functions defined in the .fp to be used directly from VB6 without using info prototype of any kind.
One problem with this regime removes a reference from Visual Basic 6 development environment - there is no obvious way to do it - there is no possibility to "remove the reference. We invariably liquidation brute force tearing all this reference to the DLL in the registry and remove the DLL itself the facility so that VB6 keep find it and insisting on using it.
One aspect is the name of the reference. What estblishes the name of the reference to the VB6 development environment? What is the name of the DLL? It is the name of the .fp file?
I could run an experience I guess, but maybe someone knows and can tell me.
Thank you.
Menchar
Menchar-
It turns out that the name of the file function group (.fp) establishes the name of the reference when the DLL is added to the Visual Basic 6 development environment.
The developer can see the associated DLL name, but the reference itself is the name of the group file function that may or may not be the same name as the DLL, the project, space to work or anything else.
Thanks for the help, Menchar, you're always on the ball.
Menchar
-
Names under icons of printer in the devices section exchanged around without warning. I can print is nothing more.
Hello
Please contact Microsoft Community.
I understand that you are facing the issue on the printer.
I will definitely help you with this.
Please provide information below.
1. you get any error message?
2. what exactly happen when you try to print?
3. don't you make changes to the pc before that?
I suggest you go through the below methods:
Method 1: Try to run the printer Troubleshooter:
Press Windows + R key.
Type of Panel, and press ENTER.
Click on troubleshooting.
In the left pane, click View all.
In the list, click the printer and run the troubleshooter.
Method 2: Try the clean boot:
A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
I hope this helps. Please post back with the State of the question and we will be happy to help you further.
-
How to get the user name during the execution of a workflow?
Here's what I would do:
Say that each user is allowed to have 4 instances QA, create a workflow when a user run from vCenter plugin, it must be able to get the user name of the SSO user jsmith, and then he questions if there is an existing virtual machine jsmith_qa1, jsmith_qa2,jsmith_qa4, etc., if there isn't one, then create one for him; If not, indicate to the user that there are already 4 cases.
I found that I can use getCurrentLdapUser to get [email protected] , now I want to remove the domain.name (there are several areas):
username = actionResult.userPrincipalName.replace ("@[a - z].") +","");
This does not work. Anyone know where I can find the right document for the document script of vRealize Orchestrator?
Thank you!
Jack
vRO uses javascript as its scripting engine.
UPN var = actionResult.userPrincipalName;
var username = upn.substring (0, upn.indexOf("@"));
Something like this will give what you want. You could also do a replacement, but I think that you should remove the quotes around the regex and use "/" instead.
username = actionResult.userPrincipalName.replace (/ @[a - z] "+ /," "");
Paul
-
Sam SM30X: OS recognizes the device name but never find USB driver
Hi, I have a pb with a SM30X; regardless of the usb device which I have connect (gamepad for example generic, USB key, etc.), he recognizes the name of periphral, but never find any driver to install what should be good that XP has all the generic drivers on the inside.
I reinstalled from the recovery DVD scratch, but still pb.
Wouldn't be a bios problem? one real OK is configured to the usb port, or would be missing on the original DVD driver files?
I need a good answer. I can't get my Saitek 220 recognized! No joystick game possible!
Thanks in advance,
Best regards
Anael
Hello
As far as I know you don t need all the USB drivers in particular. The windows OS using the usb drivers own everything they should work without any problem.
I guess there is a problem with the USB power.
Go to Device Manager and select the properties of USB root hub. You will find a power management tab. There you can disable the allow the computer to turn off this device
Check this possibility.Good bye
-
Change of name certificate issued to the previous name in Active Directory
I have user in AD that change of name. But now they have a problem with email encryption because the certificate is issued with their old name. and their certificate is not in the certificate database. Why does this happen? How can I solve this?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
The error 0xc004c4a2 during activation code
I scoured the internet for days and I can not find a working for this problem solution, I'm under Windows 7 Home Premium on my PC and at least 5 months without problem. Recently, when I logged on my PC, I've been informed that my windows is not genuine. I don't know why this has happened I have not installed the software on any other machine. I tried activating the phone, talk to an "agent" online, contact the seller and a few other methods but without end.
If anyone else has any suggestions I'd be grateful help. Thank you.Original title: product key blockedHello
Please update us with the State of the question.
Like, this 0xC004C4A2 error code is displayed for keys that have been blocked. Please see the article below:
Blocked product key
http://social.Microsoft.com/forums/en-us/a2444f34-0AFF-4f29-a8ac-67e28b0c0285/blocked-product-keys?Forum=genuinewindows7The 0xc004c4a2 error code may occur if your version of Windows that you are using is not genuine or the product key is not valid.Please refer to the suggestions of Keith - on April 30, 2010
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-is-showing-as-not-genuine/cbd43297-0e4d-458C-8487-9168c4cd668d
Error "Windows is not genuine" in Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/2704233Warning for the registry:
I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base
Registry backup
http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7Genuine Windows: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQrefer to the suggestion of Carey Frisch responded on April 28, 2011Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.
Thank you. -
No response received from the Symantec Server during activation.
OT: Network network adapter Ethernet NIC wireless networking device
I just bought Norton 360 5.0 and I can't activate it by Symantec. An error saying "No response received from the Symantec Server" I have no internet connection, but do not understand why this happens? This computer is Windows 7 Home Premium. It is connected to Linksys wireless - G wireless adapt, but as I said I am able to get on the internet like MSN, Facebook, etc.Hi LaraAngold,
I suggest you try the following steps:
https://solutions.Symantec.com/sdccommon/ASP/symcu_defcontent_view.asp?ssfromlink=true&sprt_cid=c64ef7a8-111C-47d7-88ef-b8e50c5cbd0f&docid=20071025144354ENIf the above steps fail, you will need to post your question in the following forums.
http://community.Norton.com/ -
Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.
No, but
I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...
The other annoying problem would be the user modifies the device name when they connect it iTunes...
- the %destinataire% email - address email (the EMailAddress attribute)
- first_name % - first name (FirstName attribute)
- full_name % - full name (attribute RealName)
- % of guid guid (GeneratedID attribute)
- last_name % - last name (the LastName attribute)
- the title of the post (the JobTitle attribute) %
-% mobile_phone % the number of mobile (laptop attribute)
- short_name % name run (the RecordName, generally the name of the account attribute)
The variables of the unit are:
- % BuildVersion % - full OS version on the device
- ICCID % - ICCID (from the SIM card)
- IMEI % - IMEI (International Mobile Equipment Identity)
- OSVersion % - common version number of the operating system of the device
- ProductName % - name of the product
- SerialNumber % - serial number
- % WIFIMAC %-MAC address of the WiFi interface
-
Unknown device detected during the insertion of the SD card on a Dell computer.
Original title: ACKNOWLEGMENT of CARD MEMORY
IS THERE A FILE THAT SHOWS MEMORY CARDS. I HAVE BEEN USING 2 DIFFERENT MEMORY CARDS FROM SANDISK FOR A WORK OF PHOTO NIKON D 7000. RECENTLY, I RECEIVED A PROMPT THAT A STRANGER (MEMORY CARD) DEVICE HAD BEEN DETECTED AND NOW WINDOWS DOWNLOAD TO TAKE PICTURES WILL NOT ACKNOWLEDGE RECEIPT OF SANDISK CARDS. I CAN STILL DOWN LOAD DIRECTLY FROM THE CAMERA THROUGH A USB CABLE. WHEN I TRY TO INSERT A MEMORY CARD DIRECTLY INTO MY DELL DOES NOT EVEN APPEAR.
O / S: VISTA VERSION 6.0 SERVICE PACK 2
Br: VERSION 9.0.810.16421IC UPDATE VERSION 9.0.2 KB2559049Hi Willy,.
You can try these steps and see if it helps.
Step 1:
You can try reinstalling the SD card and see if it helps.
a. Click Start, type devmgmt.msc and press to enter.
b. Locate the device name in the list of Bus USB controllers.
c. If you see the item on to the SD card, right-click on it and click on uninstall.
d. restart the computer and check if that helps.
Step 2:
You can also format the SD card and see if it helps.
You can make a backup of the data and format the SD card.
For more information on the 'formatting of disks and readers' visit this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drivesHope this information is useful.
-
Substitute the name of the device
Most of our servers are internal, but some of them are accessible from the outside. Those that are accessible from the outside have an additional DNS record for the external name. OME it straightens. So, we have a list of systems of internal names and then some eccentric entries with the external name. Is it possible to replace the "Device Name" to OME? I wish to address all systems show the internal name because that's what staff COMPUTING them know as and for consistency.
Hello
I know exactly how you mean by internal and external names, but there is an option to OME from which you can choose if you want to see the Netbios name or DNS name. You can choose this setting of the discovery planning parameters. Try to set NetBIOS and then perform discovery after removal of the tree view of the devices. Let us know if that helps.
-
By specifying the host name for the database during installation
I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.
Published by: user4928701 on July 8, 2011 23:15user4928701 wrote:
I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.Published by: user4928701 on July 8, 2011 23:15
lsnrctl stop
move/rename listener.ora to new/other file name
lsnrctl start
Maybe you are looking for
-
Why Mozilla Firefox Yahoo allows Astromenda to attack the PC
Whenever I have download Firefox, I get this virus adware malware on my PC. And I spend the hours to get rid of it. Why isn't anyone stop it?
-
How to get back my norton toolbar? Just downloaded 7.01 and want my norton back toolbar
How to bring back the norton toolbar? Just installed firefox 7.01. If you guys cannot support the security number one tab, I'll switch to another browser!
-
Error 800b0100 code - still can not update after you download CheckSUR
I have Windows 7 Professional 64 bit. I couldn't not all my updates. Code error as above. Follow the directions and downloaded the CheckSUR tool (twice). Still not be able to download 7 updates, and they are mostly related to updates of security
-
I get failed to install on this disk, can't find drivers, but when I try to install the drivers from the disc that came with the card mother win 7 will not install driver. Help!
-
Sound problems: problems with its cutting using earphones.
Hello Speakers of the laptop are poping up, and the helmet just cut off for 1-2 seconds, also accompanied the poping. Under Vista, Itunes, 8 GB of RAM, This thing worked fine for hours, and now [without doing anything to the settings] the thing does