Sam SM30X: OS recognizes the device name but never find USB driver

Similar Questions

• Try to pair with phone mob, arrive at the screen select device then cannot type in the device name.

  Phone is a Samsung SGH-A412.   PC using Vista.  I go to the Control Panel, Bluetooth, add wireless device, and then try to type the device name, but nothing happens. Tried to add a device, get a smaller screen with name & device Cat...  Same thing, nothing happens, tried after clicking the name & device Catagory also. Phone search but can't find PC.

  Hello

  Generally, you should not have to enter anything to find a Bluetooth device.

  Check out this link. http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device?SignedIn=1

  Follow these steps and come back with results.

  Hope that helps

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• Portege R830 PT321A - 3 G Modem driver does not recognize the device

  Hi guys,.

  I'm having a strange problem with the model PT321A - 01 K 002 concerning the driver of Modem 3 G.
  I tried all the drivers available and Wireless Manager sites Australia and European I can find and it just won't recognize hardware.

  To clarify, we deploy a fairly clean Win 7 64 bit build and at the end of the 3G modem is the only device not recognized, it is reported in the device under "unknown devices--> download software... Manager Strange, but "Software Download" is actually the name of the device.

  Hardware is * USB VID_0BDB & PID_100E ID * which, during all my reading, seems to be the 3G modem. No matter what I do, even a fresh copy empty detail of Win7 64 bit can get 3 g drivers to recognize the hardware.

  I guess that I install the drivers in the wrong order? I tried several combinations but cannot make it work! We buy more in addition to these with the component of the 3 G and I need to be able to deploy our SOE to it.

  Any advice?

  Thanks in advance! -Matt

  Hello

  Have you tried this driver:
  [Ericsson 3 G driver v 7.0.1.2 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 6470 selSh ortMod = 2988 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 80743 & OSI D =-1 & driverLanguage = 42]

  Otherwise recommend that you check this 3G driver Toshiba Portal
  http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

• The device name is displayed not in the newspapers of the Administration

  I chose to have the R7000 email logs to me every night.

  Unfortunately, I noticed that the newspapers do not include the name of the device as well as MAC and IP addresses for each entry.

  I can see the device name in the genius of Netgear-> screen of connected devices, then why are they not available in the papers sent to me?

  Thank you.

  Oh! I apologize, but it does not include those.

  What follows is the only will be included:

  

• USB port recognizes the devices once they work momentarily.

  I have a zune and it has worked well for over a year. Suddenly the usb drivers only recognize the device for about a minute and losing the device when I try to sync saying that it can not recognize the device. How can I get the usb ports to read normally?

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Defining the "Device Name" during activation of materials

  What determines the "Device Name" in the list of devices enabled in the pool of development on the Adobe license site for the device licenses? Specifically for Macs... It doesn't seem to be the "Sharing of preferences..." pane

  So, thought of it by myself. It seems that the serializer Adobe uses the local hostname to Mac. You can find that by going to the terminal and type "hostname". The host name gets initially fixed by any domain name that is assigned to the intellectual property. If neither is the case, it uses the share name in the sharing preferences pane. However, you can cancel and change the host name using the terminal (sudo scutil - set HostName mynewhostname.local). Deauthorize the unit on the Adobe site and reauthorize and it will appear as you wish. In this way, you can have the machine listed on the Adobe site, but you want rather than domain name. This is useful if you have a long list of machines and want to adjust their hostnames to their room number or location, etc.

• I get the message 'the' device name' cannot be stopped because a program accesses still it."when using safely remove hardware program.

  Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.

  Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.

  The download is from Microsoft so it's safe!

  Good luck!  Please rate me upward if you find my post helpful. Thank you!

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• My computer crashed and I now need to reinstall Photoshop CS5 Extended. I have the serial number and I had to the suggested link but cannot find a Setup program.

  My computer crashed and I now need to reinstall Photoshop CS5 Extended. I have the serial number and I had to the suggested link but cannot find a Setup program.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I bought Acrobat Pro DC and followed the instructions download, but cannot find the link for the download. Help, please!

  I bought Acrobat Pro DC and followed the instructions download, but cannot find the link for the download. Help, please!

  Have you checked with link below?

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X