Definitions of color display does not scroll

Similar Questions

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!

• Touchpad and mouse does not scroll on AOL or Fox News site

  Original title: mouse and keyboard does not not on the first page of web sites.

  \When opening site Internet AOL or Fox News, my touchpad and mouse does not scroll.  In addition, the normal ads that appear on AOL and the Fox new sites do not appear.  Touchpad and mouse work fine on the facebook page.  I can't click and close AOL and Fox News.  I run a system check total notron and restore systems affecting a couple of days, when everything worked well.  Any ideas to solve the problem?

  Hello

  1. what web browser do you use?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. you receive an error message?

  5. have you made changes on the computer before this problem?

  Step 1:

  If you use Internet Explorer, you can view the following link.

  Why a few blank pages or incorrectly displayed in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

  Step 2:

  You can see the following link.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

  Please provide us with more information to help you further.

• Why Firefox does not scroll the page when choosing & the cursor reaches the bottom of the screen

  The selection of text on a page of the screen when the cursor reaches the lower edge of the screen in Firefox (version 9.0.1) does not scroll. Other programs (including IE) do, so it doesn't seem to be a local computer problem.
  I don't see a setting in the page options that enables / disables this then what is the solution?

  Activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Equium A300D - 16 c - display does not

  My girlfriend has an Equium A300D - 16 c which had some problems lately.

  In recent months, whenever she turns on the system, the display does not pull upwards and it takes several tent for lights.

  The strange thing is every time that happens, the system boots normally always that you can hear the Windows 7 startup sound.

  I'm looking for in this question for some time now and I'm running out of ideas.
  Initially, I thought that it could be a wiring problem but by stripping the laptop down, I found that the cable was still firmly in place.

  I also tried to remove the RAM, HARD drive and DVD drive, but it still doesn't pull upward. On the odd occasion she started upward when you do it, but after restart, it has not started again.

  I think that this could be either a transmitting power or the mother board is on its way. This problem has worsened gradually (it took more than 20 attempts it turn on and off this morning) so finally he come not at all.

  To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.
  I tried to keep the power with no energy source button to unload the system, but it does not help.

  I also noticed that if you hear it boot and close the cover, the reopening of the display lid will come on but with the bad (1024 x 768) resolution that has intrigued me even more.

  Any ideas on what could be the problem? I would repair it rather than just buying a new as its still a decent system apart from this problem.

  > To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.

  This means that you can use the laptop as part of the external screen, but it does not work with the internal screen?

  This means that the internal display module isn't OK. It probably needs to be replaced.
  But this does not explain the problems while turning on the laptop.

  In the worst case the mother for laptop AND the internal screen are affected, but it would be really strange and rare bad luck

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Touchpad on the laptop does not scroll upwards or downwards

  The touchpad on the laptop does not scroll upwards or downwards, I was offline for 5 weeks that my router broke out between the change of operator, so I had to wait for another.
  When I was on the touch pad was'nt working properly. I can't do a system restore, because that would be the former provider. Ideas anyone please?

  First, check the scrolling settings in the advanced settings of Touchpad.

  If they are enabled, uninstall the mouse/keyboard 3rdparty as Logitech or Microsoft and Watcom drivers that may have installed you.

  If it's no good, uninstall the Toshiba touchpad driver, then download and install the latest version.

• Installed Firefox 3.6.10 now my mouse wheel does not scroll

  I just installed FF 3.6.10 update, and now my mouse wheel does not scroll. I checked my settings of the mouse, and everything is OK. Mouse wheel scrolls in applications non-Firefox, including offline and IE records online. The mouse wheel has worked well with the latest version of FF. Also tried to plug in a different mouse, (mechanical an old man to whom), same problem. If this cannot be corrected, how to uninstall the last update and revert to the previous version?

  Please read this article to see if it helps:

  https://support.Mozilla.com/en-us/KB/cannot+scroll+with+mouse+wheel+or+touchpad?s=cannot+scroll+with+mouse+wheel+or+touchpad+ & As = s

• Download StarWar 6 pack - I get "movie will play not display does not support HDCP" I have a MacBook Pro '11 '.

  How to play movie with HDCP?   What is it?  Why he won't play on MacBook Pro 2011?

  Hello TheBell,

  Thank you for using communities of Apple Support.

  I see you found a mistake that "movie will not play, the display does not support HDCP" error when you try to play a movie downloaded on iTunes. I have a couple of things I would like that you try to refine the question.

  First, start your computer in safe mode and test the question.

  Try safe mode if your Mac does not end commissioning

  If after the test in safe mode, the issue is still in progress, and then create a new user and test in the new user.

  OS X Yosemite: set up users on your Mac.

  If you still have questions, additional information would be useful. Using an external monitor? If so, test with just the internal display on the MacBook Pro. All the other things you notice?

  Best regards.

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• my color resolution does not work can you tell me how to fix it?

  Hi my color resolution does not work its blurry can you tell me how to fix it? Ty

  Hello Andrea,

  First, what operating system are you using?

  Second, how many time that there a problem?

  Was anything changed on your system before to happen began?

  Finally, you have the latest updated drivers for your video card?

  Eddie B.

• Color picker does not work in Windows media player 11

  color picker does not work. The frame color is red and there is no way to change.
  I tried with uninstall and re install, however the problem still exists.

  It seems that your WMP is in skin Mode. You can switch to full mode CTRL + 1 or Ctrl + M in WMP.

• SCREEN NOT COMING (display does not)

  Dear team

  Display does not come in my notebook whenever CapsLock light and light flashes, dealership also checked his RAM, but according to him, it's a problem internal, although wanting to take the necessary steps on an urgent basis

  Serial No. =[personal information deleted]

  PRODUCT C8C11PA #ACJ

  MODEL = HP 2000-2209TU

  [Personal information]

  1 flashes per second means CPU issue. You can have it fixed HP services.

  HP services will replace the right and exact part for this laptop.

  Having repaired with other technicians, I'm not saying that they are not good but that there could be a risk of other future issues.

• When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Color problem

  When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Problem with the video card, cable or tv.  I will try to update the video driver first.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• BlackBerry 10 Q10 Message text box does not scroll past two lines

  When you type a message in the message text box, the text does not scroll to the 3rd entry line until the line is completed. I find myself typing blind to line 3 of my message until the line 3 is full... then it scrolls to the top and becomes visible in the message text box. Any suggestions?

  Had the same problem.  You must have changed the font size of your device to a point 10 or above fonts.  If you set it to original font size which is 8, it works perfectly again.  IHAVE that mine now set at 9 and it the text field scrolls correctly now.  It must be a bug in Blackberry software so if you read these messages please fix it as I'd rather watch 10-point font.