Definitions of fields related to the duration of use of tracking data

Similar Questions

• Relative to the car after using DVR capture

  I have a Seagate 1 TB GB-Flex in the car that I used as a digital video recorder attached to a satellite receiver. I don't have have the receiver and want to use the disk for general backup purposes. I am running window OS 8.1. When I connect the drive, File Explorer doesn't. The control panel can see, but I can't do anything with it.

  Any suggestions?
  Thank you

  Go to disk management and assign a drive letter to the drive.

  If the POR was using Linux, you will probably need to format.

• How to read the counter NI9411 using C API data?

  I use the API C of NOR-DAQmx to read the data of a cDAQ-9188

  I am able to read analog voltages and entered digital fine (NI9201 and NI375).

  Problems with counters (frequency of measure) (NI9411).

  I just get error "all or part of your samples are not yet acquired" after the timeout.

  My pseudo-source:

  DAQmxCreateTask ("", & taskHandle);
  DAQmxCreateCIFreqChan (taskHandle, "cDAQ9188-189E9F4Mod1/ctr0","", 1, 1000, DAQmx_Val_Hz, DAQmx_Val_Rising, DAQmx_Val_LowFreq1Ctr, 0.1, 1, NULL "");
  DAQmxCfgSampClkTiming (taskHandle, "pfi0", 5.0, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 5);
  DAQmxStartTask (taskHandle);
  DAQmxReadCounterU32 (taskHandle, 5, 10.0, (uInt32 *) data, 5, & read, NULL);

  My device and any other names are correct?

  Thank you.

  Have you compared it against examples of api C?  I think that you have the option to install the examples when you install the daqmx drivers.

  If you have done this, and it looks the same then I would say you should try Troubleshooting If you produce any data at all.

  -Bear

• How to connect to the administration by using JDBC as data source tool in OBIEE

  Hello

  Can someone explain to me how to connect to using JDBC administration tools? Any reference document would help. I have found no documentation for this.

  Grateful for the help.

  Thank you.

  Use the BI Publisher. OLIVIER only uses ODBC, no JDBC.

• Disadvantages of the default tablespace using to store data from the partitioned table?

  Can someone tell me, are there disadvantages, performance problems using default storage in oracle?
  
  I not create any tablespace during the creation of the database, but all the data partitioned in a tablespace named 'USERS' default... I will continue using the same tablespce...? I'm storing the data in the table where the growth of the table will be great... it can contain millions of records...? It will produce no degradation of performance? Suggest me on this...

  Different storage areas for administration and easier maintenance. In some cases for performance reasons so different disks are representative to the database (fast and not so fast, different levels of raid...)
  For example if you have several diagrams of database for different applications, you may want to separate schema objects to different storage spaces.
  Or, for example, you want to keep in database read-write tablespaces and just only read. Read-write tablespaces with the data files will be on very fast disks, read only the cheaper and perhaps more slowly (not required). Again separate tablespaces makes this very easy thing to do.
  Or you would like to keep separate indexes from tables and keep them in a different tablespace on the different mountpoint (disc). In this case probably better is to use ASM, but it's more than a reason to separate.

  And in your case-, it may be easier to manage if you create a new storage space for these new objects.
  For example:
  1 storage space for small tables
  1 storage space for small index
  1 storage space for large tables
  1 storage space for large index
  and so on. All depends on your particular architecture and database data growth and what you do with these data after a year, two years, three...

• How to define the format of a field drop-down list text align at the top of the field instead of the Center?

  I have a form with the fields of data entry simple Acrobat 11. I have, for the first time inserted drop-down lists and most of them is single-line fields. However, there are a few examples where my field must be larger to mask unwanted background. (The field will define the colur to white background are data entry, but I did not write the script for this.) When a selection is made, it appears centered in the field and I need to be aligned to the top.

  I guess I can put a script on the Format tab, in the custom format script, but I don't know enough about Javascript to run on the syntax. I guess it would be a simple line or two of code. Can anyone help?

  You have no control over this. They are always vertically centered. You can use a separate field in the drop down menu, however, and control its background. I suggest to use a read-only button.

• Can a site the browser to examine all the links (relative to the root) as belonging to another area?

  One of my sites gets its images on another server (and domain). Therefore, instead of paths relative to the root, I use full http:// URL.

  Is not a big deal, except that the area where these images are stored too, sometimes changes. I have to find/replace all http:// on the right, so they point to the new domain.

  I just thought that a cleaner solution (which can - hopefully - already exist) might be to insert a single line at the top of the HTML file indicating the browser to view all the links related to the root as belonging to another area.

  Something like:

  < meta domain = "alternatesite.com" / > "

  "< img src="/images/image.jpg "/ >

  Where only one line should be changed, and the code would read as it is located on alternatesite.com, even if it is com.

  It is already doable and if so, what is the right syntax?

  Thank you!

  You have skills with the script server? It would certainly be a way to do.

• Since the download of Firefox 4, I have problems of archiving of conversations from my gmail Inbox view. Also, when I go to enter a new event in google calendar, I have to now click the cursor in the box type of the event (it used to let me just start typ

  Since the download of Firefox 4, I have problems of archiving gmail conversations since my Inbox view (one or more conversations) as it says 'No. Conversations selected' when I selected one or more. Also, when I go to enter a new event in google calendar, I have to click the cursor in the field type of the event (it used to let me just start typing) or else he bends and begins to jump to the day view or another month. Does anyone know how to fix one of these?

  I had this problem; But while trying to solve another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset the preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

• The center of GL is a required field!  Check the definition of file format in the header of the file

  Hello
  
  I'm new in Hyperion FDM. I'm trying to load a txt file using the FDM multiload feature. I created a VBScript script to load data. When I run the script, it ends without error but doesn't load any data. I get the following errors in the log file
  
  * Start the journal entry for the Runtime Error FDM [2012-01-29 16:20:07] *.
  -------------------------------------------------------------
  ERROR:
  Code............................................. 2621
  Description... The center of GL is a required field! Check the definition of file format in the header of the file (lines 1-6).
  File = 10_SAMPLE_Actuals_JAN - 2011_RM.txt
  Process... clsMPLoader.fStructGetText
  The component... upsWMPLoaderDM
  Version.......................................... 1111
  Thread........................................... 3212
  
  IDENTIFICATION:
  User............................................. admin
  Name of the computer... RAJNEESH
  App name... testfdm1
  Client App....................................... WorkBench
  
  CONNECTION:
  Provider......................................... ORAOLEDB. ORACLE
  Database server...
  Database name, orcl
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location......................................... SAMPLE
  Location ID... 748
  Location Seg... 2
  Category......................................... ACTUAL SPENDING
  ID of the category... 12
  Period........................................... Jan - 2012
  Period ID........................................ 31/01/2012
  POV Local........................................ Fake
  Language......................................... 1033
  User Level....................................... 1
  All Partitions... True
  Is Auditor....................................... Fake
  
  Here is the content and the format of the text file that I am trying to load
  
  SAMPLE
  ACTUAL SPENDING
  Jan - 2012
  1
  R, M
  a, v, e, v
  A1, version1, e1, 100
  A2, e1, version1, 100
  A3, version1, e1, 100
  
  Obviously there is something wrong in the above txt file. Someone can let me know whats wrong, I have do. I see also error in the following database tbatchcontents table after the code end run VBScript
  
  10_SAMPLE_ACTUALS_JAN - 2011_RM. TXT_CHECK FAILURE (CODE = 2621)
  
  Need your help. Thank you.
  
  Published by: rajneesh sharma on January 29, 2012 14:02

  Please see this post-online Multiload Essbase

  Thank you

  Todd Rebner

• 2.6.5 lightning Thunderbird 24.5.0, add-on. Default calendar, 60 min. length 'event '. Cannot increase the duration manually in the box dialog "Edit event" or "options".

  My computer is an ACER Aspire with Windows 7, 64-bit, processor i3 - 370 M. I used Thunderbird and the add-on Lightning for years and love it! The above problem (event time cannot be set either shorter or longer than the 60 minutes.) has started happening recently (I guess after a recent automatic update of one or two programs).
  To solve the problem, I tried:
  1. to change the time of 'end' in the dialog "edit event". When I changed the "end time" 09:00 the "beginning" at 12:00, climbed from 08:00 to 11:00, that is to say. keeping the default of 60 minutes.

  2. I then tried to change the duration of the default event of 60 minutes to 240 minutes in 'Options '. the dialog box has accepted the change, I saved; restarted; options checked to make sure that he had maintained change duration (he had), but the "edit event" dialog box always always at 60 minutes and could not manually increased or decreased.

  Can you help me?

  At the right end of the field time is a small icon. When the tips of the two links are in contact with the time of the event is locked to the default duration. Click on this icon and will separate the ends of the links and then you can change the duration.

• missing metric collections officer for the duration of downtime

  Hello

  We had to stop the FMS, and after we grew up, we discovered that metric collections officer for the duration of the downtime was missing and not populated dashboard FMS,

  We have a hypothesis, that when FMS is down or not accessible by FGLAM on the monitored hosts, that FGLAM still collects its measures and it will grow to FMS when it is returned to the online state.

  The questions are, is it true the assumption? And if it is true, how restore us these metrics data for the mentioned period?

  Thank you

  Hi Waseem-

  fglam there a store and the capacity before. The amount of agent Manager data stores is controlled

  with some configuration settings. You can read about some details here:

  http://eDOCS.quest.com/Foglight/555/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?context=field&file=StoreAndForward-field/StoreAndForwardProcessing.17.4.php&single=true

  HTH

  Robert Statsinger

• Entries related to the movement commands

  Hello guys,.

  Oracle EBS R 12.1.3 on linux,

  I create a report on Inventroy order in which I need to show the flow rate and the credit account against each line, I developed the report on the Tables of

  MTL_MATERIAL_TRANSACTIONS

  MTL_TXN_REQUEST_HEADERS

  MTL_TXN_REQUEST_LINES

  MTL_SYSTEM_ITEMS_VL

  GL_CODE_COMBINATIONS_KFV

  ORG_ORGANIZATION_DEFINITIONS

  PA_TASKS

  These tables show all of the required fields related to order but I can't find the details of the accounting of these tables means these tables don't watch what account has been debited and who has been credited as a result of the move order transaction.

  Any help will be appreciated.

  Hello

  Usually the account code you enter in the line of motion control gets charged, and inventory assessment account gets credited for a transaction to move the question of command.

  You can refer to the cst_inv_distribution_v view for details on the accounting for a transaction in inventory.

  Transaction_id column can be used to find the values of debit and credit for an operation particularly important while the BASE_TRANSACTION_VALUE column keeps the real value.

  I hope this helps.

  Thank you

  PS.

• Same field name in the superclass and subclass

  Hello
  
  I would like to know what the effect is when you have two fields with the same name in a superclass and subclass. Something along the lines of:
  

  class Base
  {
     int x = 0;
  }
  
  class Derived extends Base
  {
     int x = 1;
  }

  If I store a reference to an object derived in a variable called base Base reference and I do base.x I get 0.
  If I store the reference in a variable of reference Derived called der and I do der.x I get 1.
  Are there in fact two fields with the name of x in the case of Derived?
  
  Thank you.
  
  Published by: 953012 on March 24, 2013 16:32
  
  Published by: 953012 on March 24, 2013 16:33

  And once more, you need to see the Java language specification. It answers questions such as yours and examples. See the examples.
  http://docs.Oracle.com/javase/specs/JLS/SE7/HTML/JLS-8.html#d5e10238
  >
  Example 8.3.1.1 - 3. Hiding of Instance Variables
  . . .

  because the declaration of x in the class Test hides the definition of x in the Point class, so class Test does not inherit the field x from its superclass Point. It should be noted, however, that if the field x of class Point is not inherited from the Test class, it is nevertheless implemented by instances of the Test class. In other words, each instance of class Test contains two fields, one of type int and one of type double. The two fields are named x, but in the declaration of class Test, the name of simple x always refers to the field declared in the test Code class in the instance of Test methods may refer to the instance variable x of class Point as super.x.

  Code that uses a field access x field access expression will access the field named x in the class indicated by the type of the expression to reference. Thus, the expression sample.x accesses a value of type double, the instance reported in the Test class, variable type variable sample is a Test, but the expression ((Point) sample) .x accesses an int value, the instance variable declared in class Point, because of the cast to type Point.
  >
  Have you seen this part? "each instance of class Test contains two fields, one of type int and one of type double.

• Enter the search AF pre-population fields: query on the workflow

  Hello.
  
  What is given:
  Trimmed with flow of task one with shared data control field. Workflow contains a fragment of a page with two components: < af:query > and < af:table >. A table object view only data reading b. < af:query > relate to the search for criteria in B. There are also several bind variables in B, which are used in the criteria.
  Task flow A is used in another workflow via < af:region >.
  
  What is needed:
  When entering bounded flow task first - show empty form search user and empty table.
  When entering bounded task flows next time and the user made no research yet (flow of task just left without hitting research first)-display empty form search user and empty table.
  When entering bounded task flows next time and the user made some search - engine search of filling with the last entered values, display the data in the table that is looking for values.
  
  What is the best/recommended approach for the implementation of such a feature?
  
  When debugging, I see on the tasks delineated stream input THAT VO B contains the last variable bind of previous run. But somehow, they are not reflected in the search form and are not applied when you use the automatically view key of the query criteria.
  
  I use JDeveloper 11.1.1.5

  Hello

  sounds like this use case: Re: try to keep the search criteria in the session and stubborn taskflow outside

  Frank

• To make a link cursor to a URL relative to the root or arbitrary?

  Hey!

  I'm using the slider which came with a default model value of BC (I think it's the nivo slider), and it gives me options for the element name, URL and Image.

  The URL TO which the cursor currently links must be relative to the directory of the web application, if for example I only connects them to mydomain.com/slider/somepage when really I want to just link to mydomain.com/somepage.

  Is there a way to get around this?

  It seems that the model you are using uses Web Apps for the slider and the page layout by controlling the cursor indicates simply the {tag_image} and this tag encapsulates the URL web app mode Details around the image.  There are two ways to work around it...

  The simpler, more interventionist, is to simply add 301 redirects for content you really want.  Let's say slider links to "/ slider/somepage", that is the detail view of the web application element, but you want it goto some other content instead...

  1. Just goto the Admin of BC and goto Site Manager > URL redirects and you'll want to add a 301 redirect of "somepage/slider / ' ' / whatever-url-you-want" and it can be compared to the root of the site, if you wish.
  2. Once your redirects are in place, you can disable the web application of Carousel/Slider detail views towards Web applications > carousel (or cursor) > edit Web application settings and find the box that says "disable the detail view.

  The caveat is that whenever you add a new slider, you must add a 301 Redirect again, but do not have a lot of manure with the layout web app.  This extra step might be too much for a customer to be remember/do every time so there is another way.

  The second is to add a new field to your Web App carousel and to change the layout of the list view of carousel include the new URL field we add.

  1. First, let's add a new field to our web application of carousel - goto BC Admin Web Apps > carousel > edit Web application settings
  2. Click on the "Domains" tab on the top of the screen
  3. Click on the "Add a field" button and the name, let's use "ContentURL" (there is a 'URL' field by default for each web application that uses default URL generated the question - we do not want that if we create another field for the URL we really want to make a link to) when she asks for the Type of field we will use 'Text (String' and check the 'compulsory '.  (Note: we use text (hyperlink) due to a limitation in BC Web Apps we can't calculate the value of the hyperlink immediately, instead, it manually creates the full markup for the link which is not good for us, since we need the image of the carousel inside our link)
  4. We have added the new field to our web application to the next, we will add this domain available to our web app
  5. Click on the link to "Develop" on top of the BC Admin - this will lead us to the beta to change code editor (I stay away from changes to the Colombia-British regular site/page editor since it sometimes removes code)
  6. In the "Files" Panel on the left, navigate to page layouts > WebApps > carousel and click on the file "list.html.  This is the layout for the display of the list that is used in your home page template - the scale of the site.
  7. If you used "ContentURL" under the new domain name, then you just need to replace this:

     {tag_image}
     
     

     with this:

  {tag_image_nolink}
  
  

• That's all. All is ready!  When you add the new field "ContentURL" values, you can use URLS related site as root ' / some pages ' or you can use absolute URLS if you want like "http://yoursite.com/some-page" but I think it's cleaner if you are using relative URLS.
• If you decide to go this route and do not use the default display of the elements for the elements of web application Carousel, follow the instructions in the first example on how to disable the display of the details to appear in the search results or your sitemap.xml file.  And, from now on, ensure that each carousel has a "ContentURL", added to it, so she was going to meet somewhere...

Good luck. Let me know how it goes.