start tests: failure of all the...

Similar Questions

• 'Logical disk manager' found at the start of Win xp all the time

  Hello, all the...

  I get a 'logical disk manager' found to boot Win xp message all the time on start or restart... 100% of the time.

  I can use all the facilities of the computer from the disk management, but I' like this message to go.

  It is anotebook with a connected external USB drive sometimes. I also use an ethernet to usb tot internet connectivity device.

  Would appreciate a solution.

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  The logical disk Manager Administrative Service hangs as it begins:

  http://support.Microsoft.com/kb/307309

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 )

  Hope the information is useful.

• Need to insert test data in all the tables that were present in a schema

  Hello
  
  I use Oracle 9i.
  
  10 tables were present in my current schema. All tables are not having all the records.
  
  I need to insert test data in each table using a single procedure. (the table name is inparameter for the procedure)
  
  For example, I test_emp, test_sal tables.
  
  CREATE TABLE test_emp (ename varchar2 (40), number of sal);
  CREATE TABLE test_sal (it NUMBER, rank NUMBER, will designate the NUMBER);
  
  I need to insert some test data in these tables. I shouldn't use utl_file or sql * loader for this.
  
  I tried below way.
  

  -- Incomplete code
  
  CREATE OR REPLACE PROCEDURE test_proc_insertdata(p_table_name IN VARCHAR2) IS
  
  BEGIN
  
    --Selected all the column_names, data_type, data_length into a collection variable from user_tab_columns.
  
    SELECT u.column_name, u.data_type, u.data_length
    --BULK COLLECT INTO l_col_tab
      FROM user_tab_columns u
     WHERE u.table_name = p_table_name;
  
    -- generated the values using below statement
    
      SELECT decode(u.DATA_TYPE,'VARCHAR2',dbms_random.string('A', u.data_length),'NUMBER',TRUNC(dbms_random.value(1, 5000)),'DATE',SYSDATE) val_list
      -- INTO collection varaible
        FROM user_tab_columns u
       WHERE TABLE_NAME = p_table_name;  
     
  
  END;

  I am not able to transmit these values to the collection dynamically to the INSERT statement. I tried many ways, but I am not satisfied with the code I've written.
  
  Please help me if you know a better idea.
  
  
  
  Thank you
  Suri

  Suri wrote:
  Hello

  I use Oracle 9i.

  10 tables were present in my current schema. All tables are not having all the records.

  I need to insert test data in each table using a single procedure. (the table name is inparameter for the procedure)

  For example, I test_emp, test_sal tables.

  CREATE TABLE test_emp (ename varchar2 (40), number of sal);
  CREATE TABLE test_sal (it NUMBER, rank NUMBER, will designate the NUMBER);

  I need to insert some test data in these tables. I shouldn't use utl_file or sql * loader for this.

  I tried below way.

  -- Incomplete code
  
  CREATE OR REPLACE PROCEDURE test_proc_insertdata(p_table_name IN VARCHAR2) IS
  
  BEGIN
  
  --Selected all the column_names, data_type, data_length into a collection variable from user_tab_columns.
  
  SELECT u.column_name, u.data_type, u.data_length
  --BULK COLLECT INTO l_col_tab
  FROM user_tab_columns u
  WHERE u.table_name = p_table_name;
  
  -- generated the values using below statement
  
  SELECT decode(u.DATA_TYPE,'VARCHAR2',dbms_random.string('A', u.data_length),'NUMBER',TRUNC(dbms_random.value(1, 5000)),'DATE',SYSDATE) val_list
  -- INTO collection varaible
  FROM user_tab_columns u
  WHERE TABLE_NAME = p_table_name;  
  
  END;
  

  I am not able to transmit these values to the collection dynamically to the INSERT statement. I tried many ways, but I am not satisfied with the code I've written.

  Please help me if you know a better idea.

  Thank you
  Suri

  With some effort, you can write dynamic insert queries. Read the data dictionary views ALL_TABLES and ALL_TAB_COLUMNS to get the data you need. You may need to limit the list to the tables you specify to hardcode the names of the tables. You can read the views for the information of table and column that you need generate the insert column orders. It will be a lot of work and it might be easier to simply hardcode values. Dynamic SQL is difficult to debug and work with: (.) Something like this (untested and totally undebugged)

  declare
    cursor v_tab_col(p_table_name) is select * from all_tab_columns where table_name = p_table_name;
    v_text varchar2(32767);
    v_table_name varchar2(30);
  begin
    v_table_name := 'DUAL';
    --chr(10) is a newline for readability when debugging
    v_text := 'insert into '||v_table_name||chr(10)||'(';
    --loop to build column list
    for v_tab_rec in v_tab_col loop
      --add comma if not first item in list
      if v_tab_col%rowcount > 1 then
        v_text := v_text ||',';
      end if;
      v_text := v_text || v_tab_rec.column_name;
    end loop;
    v_text := v_text ||') values ('||
    --loop to build column values
    for v_tab_rec in v_tab_cur loop
      if (v_tab_rec.datatype = 'VARCHAR2') then
        --add comma if not first item in list
        if v_tab_col%rowcount > 1 then
          v_text := v_text ||',';
        end if;
        if v_tab_rec.datatype = 'NUMBER' then
         v_text := v_text || '9';
         elsif v_tab_rec.datatype = 'VARCHAR2' then
           v_text := v_text ||'X';
        end if;
    end loop;
    v_text := v_text || ')';
    execute immediate v_text;
  end;
  

  This code is not effective, but shows how to do what you described. You'll have to code for all data types you need and find a way to take into account the primary/foreign keys, yourself. I leave it to you to find a way to avoid selecting the data twice ;)
  Good luck!

  Published by: riedelme on July 24, 2012 13:58

• After you run the workflow in minor data, then the window "start" made its appearance all the time and don't can't stop it

  I installed the oracle11g and configured the SQL Developer minor and the data correctly, but when I run a workflow, the window 'departure' appears all the time, can't walk in the phase of runing and also can not stop. For now, the only thing I can do is to kill the program in the Windows operating system.

  Sometimes, when I kill the program and restart and restart run the workflow, it may be normal.

  So, I would like to know why and how to sovle it?

  Yes, there is a simple solution:

  "To ensure that Workflow tasks Data Miner is visible in your user interface".

  It is the window that displays the list of workflows that were run during the last day, and also all workflows running active and their completion percentage.

  If this window is visible, if it is not blocked from viewing by another tab, then you will avoid your problem.
  If you do not see the window tasks of Workflow Data Miner at all, then go to the menu: Tools-> Data Miner-> make it Visible.

  That should it appears in your user interface, then you should just make sure that it is fully visible.

  SQL Dev 4.0 final version will be released soon, it will be difficult, so this problem is no longer a problem.

  Thank you, Mark

• Start up does it all the time!

  When I turn on my computer (WIndows xp) it sparkles at the beginning until symbol "Dell" and then will be 'ghosts' the screen... Sometimes it starts without any problems, it is usually after an hour of me turning on and off the machine until it starts! Help!

  Hi minsmom,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• it crashes all the time. I just start and down, removed all the mozilla and reinstalled and still the same

  I just launch thunderbird and it crashes. I can't get an error report. I have not added any addons. and I uninstalled, reinstalled and redown loaded my gmail. and still the same.
  It says "not answered" forever

  Hold the SHIFT key and start Thunderbird and hold it down until you are prompted to enter in safe mode.

  What antivirus do you use? They have a propensity to crash Thunderbird.

• I can't find run in my Start menu, I tried all the fixes, I could find on line

  I am running windows xp professional

  Missing items on the Start Menu in XP
  http://askbobrankin.com/start_menu_missing_items.html Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Satellite C660 - 10 d Operating System not found PXE - E61: Media test failure

  I have a Satellite C660 - 10 d, which is part of the 1 year warranty which has suddenly decided it won't start and makes a strange noise that sounds mechanical.

  I tried the options F2 & F11 at startup, but I always return to the same messages some options I try:

  Realtek PCIe FE Family Controller v1.23 (28/07/10)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I can't go beyond that and get the laptop doesn't work, which leads to my second problem.

  It is under warranty so I thought I would sign in for repair. The serial number is recognized in the section Product Support My. But when I try to enter in the repair section, it is said

  ERROR: serial not valid number.
  Please check and try again.
  Then gives a number to call which only works weekdays.

  So, I have what appears to be a broken laptop that I can currently connect to repair.
  If you are able to help with one of these problems, it would be greatly appreciated.

  Hello

  I'm quite sure that the problem is related to the defective HARD drive.
  This would also explain the mechanical noise when starting.

  PXE - E61: Media test failure appears as the laptop attempts to boot from LAN.
  Why? Because the disk HARD could not be found and the CD/DVD drive does not contain a startup disk.

  So the BIOS switched to LAN

  This is why replacement of HARD drive should help you with this problem.
  If the warranty is valid, get in touch with a local ASP in your country. Maybe you could get a HARD disk which could be replaced easily

  This is a database with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service partner.

  By the way: this is the beautiful short films hwo to replace a HARD drive:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=116

• Re: Satellite L850-150 - PXE - E61 media test failure error

  Hey all,.

  Yesterday, while using my laptop normally, my laptop crashed and showed me the blue screen. When I tried to restart, he gave me what PXE - E61 media test failure, followed by the well known text.

  I looked in the BIOS and boot order was right (HDD is first as it should), but to my surprise, the hard drive was no longer recognized on the first page of the BIOS (it says HDD/SSD: None). I already tried to reinsert the HARD drive (loose screw them, removed and inserted back), but it does not solve the problem. In my opinion, it probably means that my HARD drive is defective?

  What would be the best course of action? Is it still possible to fix it? Thanks in advance.

  Somehow the disk HARD is not properly detected.
  Try to set the BIOS to default settings and check again.

  Please do so and send feedback.

• Impossible to pass all the apps that require a connection

  I had this problem since the summer power on and off: as soon I to connect to update an application, the app store fails. My connection is fine and the update process starts, but closes unexpectedly after about 30 seconds telling me that I have to go to the "items purchased" (note to Apple the German translation is bad). Of course, even when I switch to the pane of purchases the problem persists. The same problem exists when trying to install all new elements it, even for free.

  Initially, I had this problem with XCode 7. I spent over an hour with telephone support from Apple to try to correct this there included removing and running traces. They let fall the ball for several weeks and when I get back in touch they had no solutlon. At some point in October, the seeming problem to resolve itself but reappeared since then and currently preventing me from updating to OS X 10.11.

  I enabled debug for the app store and tried the different options all to nothing does not. I don't see anything special except for "storedownloadd (488) deny/dev read-data file.

  Has anyone experienced something similar and managed to fix it?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• super slow start or not at all

  I have a HP g60 535dx laptop which at the first began one day with a stuck in windows anamated files windows logo thenerror was missing or something I did a reformat and recovery with discs. even after start up of a complete cut is 10 to 30 min also stop would take 5 minutes. right now while I'm typing this I waited a good 30 minutes for him so that it starts. It gets all the way to the thing of windows anamated with black, back on the ground, and that's where he stops for a long time. as I said it has been stuck there for more than 30 minutes now!

  any help would be great! Thank you!

  I did the tests of: WOOD, there are a few days, but they pretended that everything was ok. There never load up to the time of my first assignment. She does not now hang up in the same place never go anywhere and no error this time. but I tried to use my DVD for linux and run all from the DVD and used the built in linux tests. who found a hard drive problem. so, I have a new order and should be completed by Monday! the test the hard drive could not read or right on the disc and a falty or disk head is the problem. Inspection of the hard disk shows, it has been pryed on and I'm sure that someone was inside at the same time.

  Thanks guy for jumping in full to help out! I'll post a reply when I know for sure if it's the hard drive or not.

  This forum allows laurels for 2 people? I think you both need one for the prompt help even I figured it out on my own. (I got lucky this time lol)

• HP ENVY 4500 - won't print all the lines

  Hello

  I just bought and installed my new HP ENVY 4500 printer. Facility set to be ok.

  HOWEVER, my first test prints look all the same: only 1 all 3 lines is printed. This sounds like something only black ink lines.

  I cleaned the printhead, I got out and reinstalled the black ink cartridge. But the problem remains.

  No idea how to solve this problem? (not really the best start for a new product HP...)

  THANKS for your help

  Anadri

  Hi Anadri, I suggest you contact the HP Support you may be entitled to a warranty replacement cartridge. Do you know what the warranty ends date was (AAAA/MM/JJ)

  Thank you

  Ciara

• Qosmio F750 - Media test failure

  Hello

  I have the laptop Qosmio F750 I bought about 2 years ago. I have a problem when the page Realtek PCIe GBE family controller series xv2.37 (20/10/10)
  PXE - E61: media test failure, please check the cable.

  At first I just turn off my phone and turn it back on again, and the page would leave. But now after 10 times, the page is still there. I tried pressing 0, while the laptop is running to reinstall windows. But the page just kept appearing every time than restarting the laptop. Now I've really frustrated m.

  Do you know any suggestions? And by chance, where is the nearest service centre maroubra Toshiba?
  Thank you, appreciate it

  I think somehow HDD is troublemaker of disorders and not recognized as a boot device.
  Did you create the recovery disk? If Yes use this disc to check if the HARD drive is accessible or not.

  I can't say for sure but I m afraid you need new HARD drive.

• Equium L10-300 - message "media test failure".

  Hello

  I'm asking on behalf of a friend. They recently, accidentally had a spill of liquid on the keyboard of their laptop Equium L10-300 which resulted in the message "media test failure" appearing on the screen and makes it so the laptop unusable. Apparently when the liquid was split open CD-ROM drive (coincidence?), while the player also "clicky" sounds when the case he pressed.

  Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Thanks in advance

  Hello Michael

  The liquid spited in Notepad is the worst thing that can happen.

  > Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Why hard drive? I fear that the defective mainborad may be responsible for this message (IDE controller). Boyfriend sorry but it is just a recommendation, contact the service and let check the laptop.

• new out of the box, all the ink cartridges damaged or missing error 8500

  So, I just got the officejet pro 8500 wireless. follow the instructions in game. at the start he said that ALL the ink cartridges are missing or damaged. I have a hard time believing that, if something is down or I missed something very basic in the installation program.

  I tried to remove the cartridges and re - install. Also checked that they are in the correct order. Don't know what to try next.

  Well he chalked it up to random mishap. I installed the software to see if she said something more useful. not a lot, but he pointed out that he was missing all the cartridges. I went back and exchanged the printer. the replacement is fine.