Defragmetizer does not not for drive c.

Similar Questions

• I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  Best way for you is to use Vuescan. I use it in conjunction with a Canon Lide 30 and it works very well...

  http://www.Hamrick.com/

  There is a trial version... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Windows 7 continues default installation does not no driver for HD audio on a working one.

  Hello

  I have a problem with the realtek HD audio driver in Windows 7 Pro x 64. My audio is an integrated sound card Realtek HD (realtek alc660 6-channel codec) on motherboard, Asus k8v - vm SE. Fresh after installation of Windows 7, it installs its default HD audio driver and says, it works (in the Device Manager it says, that the device works properly), but in the list of devices in reading (in the speaker system tray icon menu) there is no peripheral, so finally there is no noise. There is no problem, given that Realtek has its own drivers for Win7 x 64 available, which work just fine (ver. 2.39 R at the moment). The problem is that, after every single boot computer, Windows installs back its own drivers by default, which as I have already said do not work. The curious part is that it does not retrieve them after reboot, but only after the turn of market.

  I think the problem lies in the fact that Realtek drivers are not certified, and the MS drivers are of course. I think that Windows is to choose the latter, because it believes they are safer (workin Realtek & non certified drivers vs MS pseudo-travail & certified drivers).

  Someone has suggestions how to stop the installation of defective Win7 drivers? Installation of those appropriate to each boot is not very practical.

  Kind regards
  Dominik

  Hello

  1. the first solution didn't work, but it made me realize, that the pilot was not recovering but it was deleted and then recovered with the standard procedure (certified drivers > uncertified drivers). In addition, it was everything at random, when the driver has been deleted - sometimes it worked very well after stop and sometimes not.
  2. second solution can be followed only partially. Can I uninstall the device, but I cannot uninstall the Windows driver (maybe because the system is assuming that MS is the most trusted provider). Of course, I am able to uninstall third-party drivers, but I'm not ready to delete the driver from Realtek (I tried this however).

  3 following the first solution that I found, that Windows still prefer certified above drivers is not certified. So I came up with an idea to remove the default window driver and disable the function of downloading drivers from Windows Update. It was quite tricky, because I found, I have (the administrator of the system without restriction) am not able to even list the driver file (c:\Windows\System32\drivers\HdAudio.sys), not to mention the actual deletion of the file. It's funny that I managed to the list by using the search function, but I was not yet able to delete, so I rebooted a LiveCD and deleted from there. I also removed copies of the folder in the places, where Windows Update downloads. After that it seems to work fine now.

  4. I suggest Microsoft to release a fix or sth, that will not Windows 7 install the default driver for this particular unit, since it does not work. Or allow users to decide which drivers they prefer to use - even is not certified, because it may not be an isolated case, when a certified driver is not of works, but a certified, does not it is preferred and used. Or force the producers to certify their drivers somehow.

  Kind regards
  Dominik

• Satellite A100: webcam works does not for windows live messenger on Vista

  I recently lost my picture when working for video calls in windows live messenger, the sound of two ways and I can see them, but no one can see me.
  I also bought an external webcam, and it does not work either.

  When I go to Device Manager it says that the two cams don't work properly.
  I tried to update the drivers but they are up-to-date.
  I wonder if it's a problem of Windows live or Toshiba.
  I use Windows Vista Home Premium and the new version of messenger.

  > I also bought an external webcam and it doesn t work either.
  > When I go to Device Manager it says that the two cams don't work properly

  For me, it looks like a windows system problem.
  Usually two webcams operate independently from each other and so I don t think that it is a webcam driver problem I think that it s windows or windows live messenger problem
  Maybe something confused keys registry or files may be some updates to update or similar

  In your case, I recommend you to uninstall the software of webcam software, internal external webcam and the windows live messenger.
  Then, you must clean the BONES and the registry tool like CCLeaner cleaning, for example. It the free tool.

  After this, reinstall the Chicony webcam software and test functionality without installation of windows live messenger.
  If the webcam will be functions then you could install the windows live messenger again.

• Portege M300: Nero 7 Premium does not recognize drive - Mat * un UJDA765

  I am unable to write through Nero 7 premium on my laptop of protected m300.
  Nero 7 premium is not all recognize the dvd/cd rw burner.
  In the drop down menu drives availble to write, only the writer of images is displayed.

  Please help, if anyone knows how to fix the problem.

  I formatted the original installed OS and newly, MS XP sp2.

  It sounds everything works correctly on your laptop computer and the operating system recognizes the drive correctly. But only the Nero application makes some problems.
  Well, it's not easy to say why Nero does not recognize the drive.
  I recommend you to check the Nero Web site.
  You will find many info and tools for additional help.
  For example the infoTool can locate the fault.
  You can also try to use the Nero driver - CleanTool.exe and RegistryChecker.exe

  However, it is a 3rd party apps and I think you should ask for help using Nero.

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• Satellite A210: ODD does not work - driver may be corrupted or missing - Code 39

  The STRANGE ('TSSTcorp CDDVDW TS - L632H ATA Device") does not work on my laptop more.

  In Device Manager, the Properties dialog box says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  laptop: A210
  OS: Vista 32 bit

  I think the material is OK, as I install dual-boot linux, the STRANGE works very well under linux.

  I found updates of firmware STRANGE on the Toshiba site, but these cannot be installed with the drivers dysfunctional.

  Is it possible to find the drivers somewhere? (I can use google, but I don't know if driver download sites are trustworthy).

  Any other ideas?

  Hello

  This has been discussed a lot of time here;
  The workaround is;
  -remove the ODD of Device Manager
  -access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop

  Good bye

• Want Dv6 - 7300st: finger print works does not for Windows 10

  Hello

  I've updated 10 64-BIT windows. then after I find, validity wbf ddk driver does not. It engages and works in the background

  Please help me driver for windows 10 64-BIT

  Hi @mahmutbasar,

  There is no newer driver for Windows 10 fingerprint sensor. It seems that the old driver is not compatible with the Windows 10 either. So, if the fingerprint work in previous windows, it's a matter of software with Windows 10.

• CD/dvd drive does not recognize drives or media

  I have an acer aspire 5315, General windows vista home, copyright 2007 sp2,.

  Processor: Intel (r) Celeron (r) cpu, 540 1.86 GHz

  RAM: 1.00 GB

  system type: 32-bit operating system

  CD/dvd drive: TSSTcorp CDW/DVD TS-L462D ATA Device

  I ran pc fixer, detective driver program MAST of automatic service of microsoft. And no matter what I throw, it gives a message that the driver is corrupted or missing files. It is running on E: / drive. When you insert a cd with the media on this issue and try to run it manually. He gives the date and wants to format the drive. Don't know what to do, when I try to update the driver, it indicates the latest version is already installed. If anyone could help, I'd appreciate it.

  Thank you

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Map Microsoft Isatap does not installing driver

  I get a message saying that I have new hardware to install - when I try to install I get a message saying "a driver routine was found, but could not be installed - Map Microsoft ISATAP - a device attached to the computer does not work - search for routine of readers on the suppliers Web site.» (the message is in Swedish).

  http://support.Microsoft.com/kb/932520

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• First project does not recognize drive

  It is a crazy problem. I am trying to open a first project I've been working a few days ago. I have not changed anything about the location of the media files. From the opening, see the media files dialog box opens indicating that this area is offline. I click on search. The drive that contains the media files does not appear in the dialog box locate even if it is mounted and displays it on the desktop. Other projects who have media on the same drive are fine and grateful for this player. I have all backup media. But I'd rather avoid relinking routine.

  Hi Geoff, there.

  Sorry for your frustration with the OWC RAID. I talked to the kind people at OWC for NAB and they have found a solution to this problem which is really weird, but apparently works.

  1. Select the OWC drive on your desktop.
  2. Press CMD + I to get the information for the reader.
  3. Click the icon of OWC for the reader.
  4. Press Delete, the icon disappears.
  5. Restart Premiere Pro.
  6. The OWC RAID appears in media browser.
  7. Reconnect your film now that the RAID is mounted in Premiere Pro.

  I hope this helps. Please file a bug here.

  Thanks to the staff at OWC to share this info with me.

  It really pay to NAB Show sometimes!

  Thank you
  Kevin

• Compact/shrink *.vmdk does NOT (for Ubuntu guestOS)

  I have a Ubuntu guestOS installation running on a Win7 hostOS.

  The corresponding *.vmdk file has a size of about 8.5 GB (!).

  When I start the virtual machine and enter in a terminal:

  DF h

  then I can see that the partition contains only 3.9 GB (= 'used').

  So he has a lot of space that can be compacted/shrunk.

  I leave the guestOS and go to the menu:

  Machine settings VMware-> hardware-> drive-> utilities-> Compact

  and began an operation of "compact".

  Much to my surprise the *.vmdk file is subsequently (or almost) big as before.

  If compacting doesn't seem DO NOT work.

  Why?

  A defragmentation does not help.

  Some with VmWare Player.

  And even with the command cmdline

  VMware - vdiskmanager.exe - k Ubuntu.vmdk

  If not, how can I compact shrink the *.vmdk?

  Matt

  Assuming that the VMware virtual disk is not previously affected and the file system is ext4, you will need to manually prepare to be narrowed.

  In the virtual machine, in a Terminal, become root and then copy and paste the following command, as is and then press ENTER:

  dd if=/dev/zero of=wipefile bs=1024x1024; rm wipefile
  

  Wait for the prompt to return, then press stop the virtual computer, then the settings of the Virtual Machine for the hard drive to select the Compact command from the utility button.

• Safari does not support drive html5 video

  I can't play videos over youtube for some reason any. My browser {safari} does not support the reader formats.

  Please disable all extensions Safari and test. If the problem is resolved, re - activate the extensions one or a few at a time until you find the culprit.

• Facebook, Gmail and MétéoMédia works does not for me with the last update, even in safe mode

  That pretty much sums up it. Since yesterday, with the most recent update, firefox does not display correctly these sites. Someone else posted a question similar to this topic. It has been marked as resolved, but there is no solution posted. Here's his question: https://support.mozilla.org/en-US/questions/963125 I have the same problem as him with fb. In addition to the problem with fb, Gmail doesn't end loading. And MétéoMédia do not display the weather forecast. I'm sure that many other sites are affected as well.

  All sites work properly in Seamonkey, which I use once again, now. I went to oldapps download v. 22 of ff, but whatever the most recent update changed only came when I installed v.22. The problem persists. I could uninstall it completely and then new installation v.22, I guess, but I'm afraid that my browsing history, sessions, passwords, etc., would be affected, and I don't want to find all the files and support first. It's a hassle. Since the sites work in Seamonkey, I'm guessing that's not the fact that I have updated flash at the same time. I don't know how much these sites use flash, either. But if it's a problem of flash, I tell myself I should have the same problem in Seamonkey, and I did not.

  I wish that you guys would have an easy option to restore your updates because it's pretty darn annoying when they cause problems. Usually, they are not lethal problems, however, and the browser still works. Now ff does not work for some sites I use most often.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  __________________________________________________________________

  Also, some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  This will remove not essential info unless you check the box "delete all my personal data too.
  

  Please report back to see if this helped you!

  Thank you.

• When I plug in my flash drive in my laptop drive usb flash drive flashes a light on it and then does not open drive gs

  as the computer does not recognize the flash drive

  Hello

  1. What is the operating system installed on the computer? What is Windows XP, Vista or 7?
  2. The same problem occurs with all Flash drives?

  Visit the link provided, download and run the Fixit.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us