Delay between the speech text Conversion

Similar Questions

• Delay between the addition of peripheral support and to be visible?

  I added a device supported in the portal provider. When I disconnect and reconnect and check, it is there in the list of devices selected for this version. However, it does not appear in the list of devices if I check in the App World. Is there a delay between the addition of new devices and them being visible/allowed to download? How long is it? Or is there something else I need to do to add new devices supported for existing versions?

  I believe that the original deadline for metadata changes is nominally a day, while there may be further delays (up to a week?) so the App World client is caching information. I don't think that there is a good description of what exactly is subject either of these delays, but it's a good bet that you will see at least one. These are probably not involved if you view App World via a web browser.

• delay between the trigger and data acquisition

  Hi, I use NI SMU-6368 as a tool for data acquisition. In my experience, I use an external digital trigger to start taking measures of a thermistor.

  However, before the experience, I want to know the time that elapses between the detection of the trigger signal and data acquisition start time.

  Is there a way to do this?

  Here's the kind of thing I configure to get an accurate measure of time of t = 0 trigger signal to the

  the actual first A/D conversion.   It may be too much for a measurement of the temperature, but you should get

  the right track.

  -Kevin P

  

• Start-up delays between the Windows startup and the logon screen

  I have two PC's that have essentially the same Intel motherboard, but with different form factors. The smallest has a less powerful CPU and a slower hard drive. Still more has a significant delay between displaying the logon screen and Windows startup. Between the two, the display shows a cursor that cannot be moved through the mouse for 30 seconds or more, while on the smaller than the slider shows only for about a second.

  I realize, the problem could be many things, but I'm guessing that material or a device sound driver. I watched the event logs, but I couldn't see anything strange. I expected to see a "CPU does not ' or"USB 3.0 controller has a hardware problem"kind of thing. I ran Intel IPDT but he did not find a problem. Device Manager displays all of the problems. There is no graphics card on a system. I unplugged the USB cable to the printer, but that did nothing. No games are installed on a system. Nothing seems to be overheating. There is no network drive. All drives are SATA and BIOS is set to AHCI.

  Someone at - it the words of wisdom about what should I look for in the event logs?

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good antivirus program
  2. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure
  3. I would like to be sure that none of the drives are more than 75% in use
  4. I would check my memory using the auditor memory Windows 7
  5. I would like to install and run Autoruns to check what is in the startup process
  6. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.
  7. Remove Programs/applications from starting unless I really need to start

  Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer

• Difference between the message and conversation

  What is the technical difference between a message and a conversation. Is that when multiple messages are in 1 conversation?

  A message.
  An email received or sent is a message.

  A conversation can be launched with a message.
  A conversaion can have messages, screw where the example: the 'Reply' button was used and enamel is spent here and there with the comments.

  If you select multiple messages in a list, they will be displayed below in the Message pane in the form xx number of conversatons.

  If you right-click on a message in the list and choose "open in a conversation." then it will open in a new tab showing all the emails included threaded, which are relevant to that conversation, both received emails and those you sent.

• delay between the identical waveforms generated

  Hello world. I want to generate tension by the use of the NI USB - 6353 X. When I tried to use the vi 'Voltage - finished output.vi' example, I realized that there is a period of time between two generated waveforms. It is an undesirable situation for our application. Why is this delay happens? How to generate at the same time?

  

  VI of function generator based on there is an entry called Signal of Reset.  Than the true value.  What is happening is that your second wave comes to be a continuation of the first.  As the first waveform settings say he needs a little more time, you get this time dead at the beginning of your second waveform.

• Inexplicable delay between the evolution of the tab control pages

  Hello dear OR Forum.

  I have a strange problem.

  In my program, I use a tab control.

  On a change in the pages of pc immediately once the user clicks on the other page, but on another pc it is delayed (approx. 1 second) until the new page is displayed. The rest of the program works with the same "speed".

  You have an idea why this happens?

  The main program includes a while loop with a delay of 25ms. In the loop, there is a case structure, cases are different pages of the tab control.

  (it's the same exe file)

  Thank you.

  Alex

  Tabs changing pages require a screen refresh if at least the graphics adapters could make all the difference.

  More memory in the faster machine...

  The slow mahcine there a virus check or other processes that use CPU?

  Ben

• How to create a delay between the start of the signal simulated one and the other?

  Hello

  As a first step, I am relatively new to Labview.

  I am trying to use Labview for 2 different output square waves (different frequencies, amplitudes, etc.).  I've implemented 2 signals to simulate different and do them in a While loop, however, when I start the program, I need a square to begin signal immediately and the other to start square waves 2 seconds later.  Any help would be greatly appreciated.

  Thank you!

  A few questions.

  Are these frequencies of associated signals? If so, were they to be "in phase"?   As from one simulation after another, put one start later in a case statement, pass a county of timer to establish the initial start time through the loop, subtract the value of the other in the loop, when the difference is => in 2 seconds, set a real flag and have the second simulation in the real of the structure of the business case.

  Typed too slowly again!

• How can I impliment a delay between the analog output and analog input (started by an external analog trigger)?

  I am acquiring several channels of analog voltage input at the same time, I need to send an output analog two seconds after the start of the entry.

  I'm running an experience with accelerometers on a query table.
  I start the trigger and the table remains still for two seconds, which allows a reference level for all sensors.
  Then the output signal of the VI removes the break in the motor controller.
  The speed measured by the encoder is sent to one of the input channels.

  In this way, our accel and speed data are synchronized.

  After it acquired the analog input data out put must be reset to zero.

  MULTI.vi

  I've updated the link above works of VI, I used a property node to solve the problem.

• Find the time delay between two signals

  In this code, I sent you a pulse in the acquisition of data using labview. The pulse triggers a thermistor to another analog input input data.

  I want to find the delay between the time of the positive edge of the switch, and the exact time of the DAQ begins to take in the signal of the temperature probe.

  I enclose the code below.

  Thank you.

  Hey,.

  Here is a link to some information about the sources of clock on the FPGA.

  http://digital.NI.com/public.nsf/allkb/94CE338CC80ACF008625791400516BAA?OpenDocument

  Hope this helps

• I'm using Labview TDS3000 Tektronix pilot measures the delay between pulses on two different channels

  I use the driver for Tektronix TDS3000 Labview to configure an TDS3034B oscilloscope and I try to measure the gap between the falling edge of a pulse on channel 1 and the edge failling from an impulse on channel 2. It seems that the TDS3034 can measure this in in-house by the use of the measurement on the front panel key, but how do I retreave using your labview driver?

  Hi Tori

  I am now in place and running, I already had the TDS3034B to measure the delay between the pulse on channel 1 and the pulse on two channels, as well as the pulse width tuned to channel 2. This was done by saving the settings on the scope on a diskette and cutting and sticking them in a modified version of the TDS3000 auto setup vi. I created from a simple VI which allowed me to manually enter orders for tektronix and found that the command "measure: meas1: data? went around.

  Thanks for all your support on this issue.

• The delay between starting the virtual machine folder.

  I used some teams a lot in workstation 7, but in work stations, 8, they were replaced by folders.

  One of the great thing about the teams has been the ability to control the delay between the start of virtual machines.

  8 I can only find a general option under change preferences in my computer. I gues the only way around is the starting order of script or is there an option that I missed?

  According to an analysis last week of one of the developers of VMware, yes - scripting is the best answer.  He said that the old method of delay the start was not exactly accurate anyway and recommended script.

• NOR-FBUS Configurator 4.1.0.49152 + USB-8486: High-delay between consecutive writing actions

  Hello

  Imagine a case where you have a block (transducer) at least about 12 parameters that both read and write access:

  PARAMETER_1

  PARAMETRE_2

  PARAMETRE_3

  ...

  PARAMETER_12

  PARAMETER_13

  ....

  When editing two of these parameters which do not "resident in the district close" (like parameter_1 and PARAMETER_12) and then write them down via "Write the changes" in the block discovers that I observe, that there is a delay between the write access for the first and the second parameter (up to a few seconds).

  Since I am a developer device I can see it when debugging on the device.

  Can this delay be avoided?

  Concerning

  Mike

  Hi Mike,.

  1. try to uncheck the 'Update period' in the upper left conner of the view of the block. It is possible that this caused a conflict with your read/write action.

  2. what type of device that you are experiencing this issue with you use? Have try you on other devices? Just in case the extra long delay was caused by the device.

• The Tab key no longer works for allows me to go between the text entry boxes

  After updating to the new version of Firefox the Tab key is no longer work when switching between the text fields to enter information such as shipping address, name and stuff like that where a simple TAB could sail between the text boxes.

  Hello benpierce25, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  • You also had a file User.jsin your profile folder .

  The user.js file does not exist by default. If you create the file, forget it, if you don't have not create the file, and then remove the User.js file, to see if the problem goes away (some programs create and write to the file also).

  Thank you

• How doi send texts using the speech function without hitting the Send button?

  using the speech function in texting, how to send the text without actually pushing the Send button? When I say 'send' or 'send message' he just keeps typing

  "Hey, Siri, send a message to Bob. Siri will then ask you what you want text Bob. Once you stop dictating, Siri will ask then if you're ready to send the message. Say, "Yes." It's really very nice.

  If you are already in the message app and using speech-to-text, you must press the Send button.