Similar Questions

• I deleted all my photos and music from my mac and moved to my time capsule. It still shows my hard drive as full? I have to format

  I deleted all my photos and music from my mac and moved to my time capsule. It still shows my hard drive as full? I have to format

  If you restarted the computer, which can help the system see the

  amount available content recently removed as free to crush.

  Sometimes, a reboot with a quick operation of the SHIFT key down, can

  help the system file check and minor repairs on start up.

  • Try safe mode if your Mac does not end commissioning - Apple Support

  A moment after this restart, you should see a login to continue

  If secure boot will be available. You could repair disk permissions

  in this mode, or use it for troubleshooting. Restart normally

  subsequently pressing don't all the keys, just restart. IF that is not

  help, then try this short method to rebuild the Spotlight index; It can

  Take the time to complete the process:

  • Rebuild the Spotlight index on your Mac - Apple-Support-link

  https://support. Apple.com/en-us/HT201716

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• I accidentally deleted all my Inbox and then deleted from the Recycle Bin. I need to see if someone can help me to restore it.

  * Original title: tjbturner/remove

  Hi,

  I accidentally deleted all my Inbox and then deleted from the Recycle Bin. I need to see if someone can help me seek and find these files so that I can restore. I looked everywhere to see if they are there, I can't find the.

  HELP PLEASE!

  tjbturner

  (Moved to repair and recovery)

  Unless you do the backup that Microsoft has offered when you have joined the electronic address data are gone because, like you, the online servers are not backed up

• I use Illustrator CC and sent a file to a colleague who uses CS6 where all the layers become a great layer.  How can I send it and preserve the layers?

  I use Illustrator CC and sent a file to a colleague who uses CS6 where all the layers become a great layer.  How can I send it and preserve the layers?

  coledang,

  Save a copy, and in the following options choose CS6.

  In this way, it should open correctly in CS6, and the original document is unscathed.

  You may find that some (new CC) features will not survive the downsaving.

  Edit: Hi SRiegel.

• I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  I get videos from cell phones of the people with a type of file like 3GP. I need to know how to save and change the format so I can open them.

  Trying to convert to the. WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• I deleted 'My pictures' folder and need the rear of the backrest

  I deleted 'My pictures' folder and need the rear of the backrest.  He had all the images in there, so I'm not concerned about the photo recovery... but I need the 'My pictures' folder because that is recognized as default by most of my programs to Pic.  Help, please.  Thank you.

  Hello

  There should be other Points of restoration - select choose another restore Point.

  If you cannot use the system restore there are other methods.

  Start - type in the search box-> shell: my pictures
  Press ENTER

  Shell commands
  http://www.Vistax64.com/tutorials/91188-shell-command.html

  Shell commands
  http://www.Winhelponline.com/blog/shell-commands-to-access-the-special-folders/

  That restores the My picture folder such as it was, however, it does not return photos
  If you need people. There are programs of recovery if necessary:

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
  map of the camera digital or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

• I tried to add another user to my MSN account and, in doing so, I deleted all my contacts and e-mail site. I tried on another computer.

  Original title: I have windows 7. my email is * address email is removed from the privacy *. I tried to add another user to my account and, in doing so, I deleted all my contacts and e-mail site. I tried on another computer.

  I have windows 7, which came with my computer. My email is * address email is removed from the privacy *, I got that email for years. everything is on this site. I have no access. I was trying to install another user to my email and in doing so, I deleted my * address email is removed from the privacy * email. I tried it on another computer at the library and I still have no access. I use another e-mail on the same computer * address email is removed from the privacy *.  I tried the control panel and others for a solution, but now I've pretty much given up.

  Hi Johnplyons,

  The question you posted would be better suited to MSN support. I would recommend posting your query in the Forums of MSN.

  MSN support

  https://support.MSN.com/default.aspx?WA=wsignin1.0

   

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  Hope this information is useful.

• FF 11 deleted all my cookies and history; Difficulty how

  FF11 deleted all my cookies and history.

  How to fix?

  Your Firefox is very probably on clearing your cache automatically. Try disabling it and see if it solves your problem.

• After importing the files in lightroom cc2015.2, they are all less exposed and developing the show exposure to-5. Help, please.

  After importing the files in lightroom cc2015.2, they are all less exposed and developing the show exposure to-5. Help, please.

  Hi paulw,

  For existing images whose exposure have changed, please select all and go to photo > develop settings > reset.

  For import next session, please follow the steps below:

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

  Concerning

  Sarika

• In our laboratories, we have always used licenses and local facilities.  We're now heading creative cloud.  Do I need to uninstall all adobe products and reinstall the Cloud products?

  In our laboratories, we have always used licenses and local facilities.  We're now heading creative cloud.  Do I need to uninstall all adobe products and reinstall the Cloud products?

  Clouds and non-Cloud programs are installed in different folders and can co-exist

  However... If ever you cancel your subscription of cloud, you can have problems with your previous programs

  Note about what could happen https://forums.adobe.com/thread/1584746 can help

  - and https://forums.adobe.com/thread/1584746

• Why my messages on my poster mac app I closed the messages, but I deleted all my messages and does not appear on my messages on iPhone

  ??

  Please take each of the following steps that you have not already tried it.

  1 right-click or click and hold the dock icon to view the messages unread, as appropriate.

  2 quit and restart the messaging app.

  3. disconnect all messaging services you use and reconnect.

  4 log off or restart the computer.

• You press on delete all selected items by browsing the data store and accidentally deleted a vmdk file which has the OS on it

  I accidentally deleted the vmdk file that has my OS on it by pressing the "Delete selected items" button in the window of browser data store. Is there anyway to recover? I have a snapshot that doesn't seem to work. There is still the VMDK file in there, but it has now 'delta' be added at the end. Now I get an error message when I try to turn on my VM saying that he doesn't get the vmdk file, of course.

  

  

  From the screen shots looks you have deleted only the descriptor hard files that can be recreated. To ensure this is the case, please provide a complete list of the files in the folder of the virtual machine and attach the last file.log of vmware(from the virtual work computer) to a post response to view required details.

  André

• SD card reader asks that all cards must be in the format

  Hello

  I've seen several posts about this, but no real answer. Most of the posters don't describe their problem, and they do not give all their card reader and the specifications of the computer record. So here's my question and specifications, thanks for the help.

  I am a wedding videographer and am currently using the Universal USB 3.0 card reader Verbatim from the videos of my DSLR to my computer. Today, the SDHC slot (and only the SDHC, all other slots we are tested and work correctly) has stopped working and asks me to format my card when it is inserted. After formatting the card, I can then transfer all the files to the card, but after the ejection, then reinsert the card, I am again asked to reformat immediately. Here are my specs and what I've tried so far. I'm clear my cards as it should prepare for a wedding coming up, however, there are some files on the cards, that I prefer not to delete.

  My system: Windows 7 Professional (64 bit), the drive is currently connected to one of the 2 USB 3.0 ports (I had the player for 2 years on the same system and it's the first question I've met)

  Trying to correct:
  1. I tried other card slots (CF, miniSD, etc.) and everything works properly and do not require a format to use.
  2. I tried to move the actual USB cable into another port, but the same problem occurs.
  3. I uninstalled and reinstalled the device through the device, without success Manager.
  4. I visually inspected inside the slot itself and, it seems, all the pins and contacts are in place without dirt or visible corrosion.
  5. I did a chkdsk on the cards themselves to ensure that they are not really the issue. No not found errors.
  6. I simply restarted my PC to see if it helped, it only has done it.

  I believe it has something to do with the slot being corrupt (I think our food can have out a moment last night and caused corruption), suggestions on how to fix this problem without having to simply buy a new player (taking into account that a single slot currently not working)?

  Thank you!
  Brock

  Hi Torunski Brock,

  The details you have given is used to determine the troubleshooting steps to isolate the unit in question.

  Here are a few suggestions, try, let us know if it helps.

  1. Kaspersky Anti-virus scan on all your storage devices.
  2. Run the System File Checker to detect and repair corrupt files.
  3. Run Windows update and see if there is any updated driver for Usb devices. Click the Start button> Control Panel> system and security> Check for Updates.
  4. Click here for more information about disk management. (You can follow the procedure on this link on the formatting using disk for the reader of card memory management).

  In case the same thing happens, that means a hardware fault on the card reader.

  Thank you.

• How to choose a character style instead of the entire text selection when running a script?

  I have a script, which, after having selected the text, can change the appearance of the figures. This action, therefore, covers all the numbers in the document to help:

  
  

  01 If (app.selection.length! = 1)

  [... here, the rest of the script]
  

  
  

  How do I change this line to apply changes only to those numbers until the tag with a specific character style?

  
  

  Thank you.

  
  

  I tried to change this line which is to select all the numbers:

  If (app.selection.length! = 1).

  This line is all, but by selecting all numbers. It only checks if there is more than one selected item. Selection of texts always returns the length of 1. That's why this review.

  And given what I've offered before, all you have to do in Jongware script to match your needs is to add app.findGrepPreferences.appliedCharacterStyle = theStyle;

  Before findGrep().

  HTH

  Loïc

  http://www.ozalto.com