delete operation does not initially

Similar Questions

• Delete operation does not remove the newly created line of VO

  Hi all

  I use Jdev 11.1.1.7

  I try to use a simple delete on a line of an af:table operation.

  The line is newly created (not in DB) and I have some autoSubmit = "true" defined on certain inputText of the table (not sure if it's relevant information).

  I followed the nice post of Andrejus on the immediate = "true" the button Delete.

  Andrejus Baranovskis Blog: Deleting line new form ADF (ADF followed Webinar)

  It works fine when I delete the line, it ignores validation and disappears from my af:table.

  But when I commit my transaction, all new lines, even those deleted, stored in DB.

  No idea what could be the problem?

  Let me know if you need me to post the code.

  Thanks for your time!

  I found the problem in the definition of my VO.

  The use of the entity has been defined with the property DeleteParticipant = "false"...

  What I don't understand is the reason why I had to go to the source to change, in the overview of the VO, the box is read-only...

• Delete option does not appear in the list when I right click on any element

  Original title: Please help friends

  

  In my laptop remove option does not work...

  I m not to delete something which in my hard drive laptop because delete option does not appear in the list when I right click on any element...
  Also does not work with the button remove from my Matthew...
  It is the only work when I cut this point and stick to the desktop, now I can delete...
  I also try to install Windows again but the result is the same
  Please help friends if you can...
             
  Thanks in advance

  It is not working...

  I already tried...

  But now my problem has been solved...

• When not equal then delete target does not. Please suggest.

  When not equal then delete target does not. Please suggest.

  MERGE INTO pppp pp

  With the HELP of pppp1 p1

  WE (pp.productnr = p1.productnr)

  WHEN NOT MATCHED

  THEN

  DELETE

  Hello

  2751928 wrote:

  When not equal then delete target does not. Please suggest.

  Think about it logically, is that correct?

  You say: DELETE something that does not exist. The NOT MATCHED block will be executed only when the data being sought are not found.

  AS FAR AS I KNOW:

  For NON MATCHED block, INSERT only is allowed.

  For block MATCHED, UPDATE, and DELETE are allowed.

  Take a look at this point - ORACLE-BASE - improvements in Oracle Database 10 g MERGE statement

  Please explain, in other words English, what you are trying to reach.

• IN operator does not

  Hi all
  
  I cannot understand how an operator in works in the following cases
  
  I have 2 tables
  TBL
  ----------------
  coltwo (varchar2) colthree (number)
  ABCD/PQR 12345
  ABCD 13452
  PQR 12343
  MNO 12334
  
  Tbl_Main
  ----------------------
  m_col1 (Varchar2) m_col2 (Varchar2)
  A_B_C_D ABCD/PQR
  A1_B1_C1_D1 ABCD/PQR
  E_E_E EEE
  P_Q_R PQR
  
  Declare
  V_var varchar2 (100);
  V_Var2 varchar2 (100);
  Begin
  Select "' | REPLACE (coltwo, "/", "", "') |" ' in V_var from Tbl where colthree = 12345;
  Select coltwo in the Tbl V_var2 where colthree = 12345;
  dbms_output.put_line (V_var);
  dbms_output.put_line (V_var2);
  
  I'm in (select m_col1 IN the Tbl_main WHERE m_col2 IN (V_var) or m_col2 like '%' |) V_Var2 | » %' )
  Loop
  dbms_output.put_line (i.m_col1);
  End loop;
  
  End;
  
  
  Output of DBMS
  -------------------
  'ABCD', 'PQR '.
  ABCD/PQR
  P_Q_R
  
  where as it should be
  -------------------
  'ABCD', 'PQR '.
  ABCD/PQR
  A_B_C_D
  A1_B1_C1_D1
  P_Q_R
  
  
  Packages above should get all the lines of m_col1 of Tbl_Main that m_col2 such as ABCD, ABCD/PQR or PQR.
  but for some reason, I get rows of ABCD/PQR. I don't understand why the in operator does not work.
  It is not an error or a warning outside the above question, everything works fine... can you tell me where I'm wrong or why I get no results except
  
  Thanks
  Saami

  Hi, Sami,

  You set v_var to the string of 12 characters:

  'ABCD','PQR'
  

  The condition

  m_col2 IN (V_var)
  

  is never TRUE with this example data, because m_col2 is never this same string of 12 characters.

  In other words, you make the equivalent of

  m_col2 IN (Q'['ABCD','PQR']')
  

  When there is a 12 string in the IN list, not the equivalent of

  m_col2 IN ( Q'[ABCD]'
            , Q'[PQR]'
            )
  

  where there are 2 strings (one with 4 characters, the other 3 characters) in the IN list.
  Try changing:

  Select ''''||REPLACE( coltwo,'/', ''',''')||'''' into V_var from Tbl where colthree= 12345 ;
  

  TO

  SELECT  '/' || coltwo || '/'
  INTO     v_var
  FROM     tbl
  WHERE     colthree     = 12345;
  

  and also to change the condition

  WHERE m_col2 IN (V_var)
  

  TO

  WHERE   INSTR ( v_var
             , '/' || m_col2 || '/'
             )         > 0
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all tables and also post the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• Delete statement does not work properly

  Hello
  
  The following delete statement does not work correctly.
  If I press DELETE will delete everything in the table of categories
  I don't know whats wrong with it.
  -Delete category line if there is not the infrastructure to support-
  IF: P12_DFCY_SEQNO4 IS NOT NULL AND: P12_DFCY_CATG_C = "7" THEN
  REMOVE FROM DFCY_CATG
  IF NOT EXISTS (SELECT I.DFCY_SEQNO
  OF DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
  WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
  AND: P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
  end if;
  
  Thank you
  Mary

  You probably the where more clause:

  DELETE FROM DFCY_CATG
  WHERE C.DFCY_SEQNO = :P12_DFCY_SEQNO4
  AND NOT EXISTS(SELECT I.DFCY_SEQNO
  FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
  WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
  AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
  

  Not sure if this is the exact name of your column in the table, but that limit the scope of deleting just a record that you control.

  Hope it will be useful,

  Aaron

• Delete bookmarks does not always remove them.

  Using the recommended procedure - click on the stars to open the dialog box, then click on delete bookmark - still does not work. It some but leaves removed others still in place. It should be the last entry in the dialog box (tags) is shown in blue, but this bookmark delete is not highlighted?

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Cannot sign out of Hotmail, on either my laptop or my partner. Had the problem for 6 to 8 weeks. Deleting cookies does not cure it. Computer store cannot heal. Help please!

  I have Windows XP on a laptop.

  For 6-8 weeks, I have not been able to sign out of Hotmail. He said: I signed up for MSN account but not hotmail. Try to delete cookies. It does not work. I don't think it's my laptop at fault because the same thing happens when I use my partner's cell phone, but it does not happen on his Hotmail. My friendly computer shop started by giving my laptop a good clean and have since scrubbed off the coast and reloaded. The problem is still there.

  Can you help me, please?

  Hello

  ·         What happens when you try to sign out of hotmail?

  ·         Does happen only with hotmail account or other accounts as well?

  ·         What web browser you use to access hotmail?

  If you use Internet Explorer, I suggest you follow the steps mentioned below:

  Method 1:

  Disable Add-ons and check if the problem persists. Follow the steps in the link:

  http://support.Microsoft.com/kb/883256

  Method 2:

  If the steps above to reset the Internet Explorer settings and check if the problem persists. Follow the steps in the link:

  http://support.Microsoft.com/kb/923737

  Disclaimer reset Internet explorer:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can also post your request in the hotmail forum. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• BlackBerry Smartphones delete prerequisite does not synchronize with the mailbox store

  Subscribe to a "Digest" newsletter and mail is delivered to my BB about once an hour or two.  Sometimes, I want to read the messages, other times that I don't have.

  When I don't want to read the messages, I just highlight the address of the sender to view only those messages, then I hit 'Delete forward' in the BB Menu.  This erases all messages from my BB, but it does not sync with my mailbox.

  Is there a difference that I'm aware of to hit delete prior vs just select each message and pressing DEL?

  Verizon Storm2 (9550).  Items removed from synchronization is enabled in settings BIS.

  Hello

  This KB may apply:

  •  KB00285 E-mail messages not deleted after the email reconciliation

  While he discusses BES, it doesn't indicate that the behavior that you see is the one specified. The thing to do would be to wait at least 24 hours since all but new delivery e-mail is at a lower priority.

  Good luck!

• Remove operation does not work

  Hello

  JDev 11.1.2.4

  Once more a strange ADF issue. I select a row in a table (founded iterator VO/OS), and click a button that invokes an action binding method remove which was created by selecting the iterator, then the Delete operation. When you click this button, I can see that in the newspaper:

  < DCUtil > < findSpelObject > [7016] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for IRRISAppModuleDataControl

  ViewRowCache < ViewRowCache > < removeReference > [7017]: removeReference, id = 782 RV

  < JUCtrlHierNodeBinding > < raiseRowDeleted > [7018] liaison: noCtrl_oracle_adfinternal_view_faces_model_binding_FacesCtrlHierNodeBinding_314, DataChangeEvent REMOVE arises.

  < ADFLogger > < start > list get LOV

  < DCUtil > < findSpelObject > [7019] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for IRRISAppModuleDataControl

  List of < ADFLogger > < addContextData > get LOV

  List of < ADFLogger > < end > get LOV

  Then I updated my iterator and my table component, but the line is not deleted. So to eliminate the fact it might be a problem of refreshment, I click on a button that COMMIT. I don't have the SQL DELETE statement.

  I tested the OV AM Tester and I can remove and commit this deletion.

  Any idea?

  Thank you

  After some tests, I discovered that the selected line has not changed during the selection of a row, I change the selection of single votes to zero, then returns to the single. Now it's working.

• Interactive report 'IN' operator does not work with commas

  Hello

  I use an interactive report of the APEX and I need to filter a column of values a couple.  I use the IN operator column.  However, one of the channels I'm looking for has a comma in it.  The IR treats this as a delimiter and does not find the value. For example, I want to filter the values:

  Oracle Canada ULC

  Oracle America, Inc..

  The operational unit IN in the IR is equal to 'Oracle Canada ULC, Oracle America, Inc...  He finds only the lines with 'Oracle Canada ULC'.  He seems to think that "Oracle America" is the second value in research and "Inc." is the third and can't find anything for them.

  Is there a way to escape the comma in "Oracle America, Inc." so he treats the entire string as a value to search for?

  Thank you

  Steve

  To in front-end (user) has chosen Actions-> filter-> filter-> line Type

  • In the columns , choose your column (operational unit)
  • Functions/operators choose IN
  • In Filter Expression, type your expression ("Oracle Canada ULC", "Oracle America, Inc.")

• View Manager 5.1 operations does not not after upgrade

  Hi people,

  I'm in trouble with VMware View 5.1 after reclassification of 5.0 to 5.1, vcenter is version 5.0, composer has been improved from 2.7 to 3.0 and all esxi hosts are in version 5.0 with the latest upgrades.

  Any operation work, recompose pools and desktop computers start and don't give any error, if I cancel a redial for an office, for example, it simply shows 'cancelled' and if a test again it is said that the last task is still in progress and I can not to perform a new task. I need to cancel it because it does not start.

  In the dash, everything is green.

  There is no suggestion?

  Thank you.

  It is a problem of EMC storage.   I never would have guessed that, but I'm glad that you solved.   More important still thanks for the reply comes back with the resolution in case someone else runs into this problem.

• How can I remove old agreements when the "delete" button does not work?

  In our account here several agreements that are years old, created by users is no longer working with us. But in the accounts of administrators who have access to these agreements now, the 'deleted' button is gray and does not? How get rid of these old contracts?

  Hello

  May be that the sender of a document cancel/remove the agreement.

  Thank you

• After delete trigger does not work

  Hi all
  I wrote the trigger
  
  who does not
  

  CREATE OR REPLACE TRIGGER DELETE_HR_API_TRANS_TRIGGER
      AFTER DELETE
          ON hr_api_transactions
          FOR EACH ROW
          WHEN ( NEW.transaction_ref_table = 'PER_ALL_VACANCIES' )
  BEGIN
      
      xx_GL_Vacancies.delete_transaction(:OLD.transaction_id);
  END;

  his compilation succesfully
  but nothing bad happened on the tables
  
  I think there is problem in

  : OLD.transaction_id

  Have you added the COMMIT in your stand-alone procedure xx_GL_Vacancies.delete_transaction?

• User accounts does not initially and windows to remember password for account (evil)

  Hello

  Thanks for any help in advance.

  TLDR: Windows trying to connect in user 1 with the old password and does not give me the option to connect user 2

  I'm trying to set up a new account for my roommate to use. It's something I've done many times before and never had a problem with.

  This time, however it is causing me pain.

  First off I created a new user account (user 2) gave him a password and him give a normal user account (not admin). I also changed the password on my account (user 1) which is an administrator account.

  Now when I restarted my computer I expected to go to the login screen and give me two options (user 1 and user 2) that would require a password. I should mention here that before that I created the 2 user I've ever seen the login screen as it starts directly on my desk.

  What is happening at startup, it is just after windows logo I get the message "the password is incorrect" (on the lines in any case).

  When I confirm this message I show the log on screen but it only shows the user accounts 1 and 'others '.

  I can enter the new password for the user 1 at this stage and connect fine, I can also go the "other accounts" and enter credentials user 2 and connect fine but on reboot, I get again the opinion of incorrect password and user 2 is not always displayed on the login screen.

  The incorrect password, he speaks is the old password for user 1, but I'm not enter, it of like windows remembered the old password and trying to enter to connect directly to user 1 with it.

  I tried to do admin user 2 also, but no difference is made.

  If someone has an idea, they would be much appreciated,

  Thank you.

  What is happening at startup, it is just after windows logo I get the message "the password is incorrect" (on the lines in any case).

  When I confirm this message I show the log on screen but it only shows the user accounts 1 and 'others '.

  This happens because someone has configured your machine some time ago to connect automatically. You can adjust the process according to your needs:

  1. press Windows + R key on your keyboard.
  2. Enter the following command and press ENTER:
  netplwiz
  3. check the box that requires users to enter a password.
  4. click on OK.
  5. take note of the process for later use.