Unable to enable logging

Similar Questions

• Installation through dbca.rsp - unable to enable logging of archive during installation

  I am trying to perform an automated installation of Oracle 12 c DB.

  In the same dbca.rsp file that is provided with the installer of Oracle 12 c I don't see a place where I can specify to enable logging on the installed database and the location of archive logs archives.

  In addition, below parameter when specified makes no different to the installer and it takes just the default location every time.

  #-----------------------------------------------------------------------------

  # Name: RECOVERYAREADESTINATION

  # Data type: String

  # Description: Location of the data file

  # Valid values: location of the recovery area

  # Default: $ORACLE_BASE/flash_recovery_area

  # Mandatory: No.

  #-----------------------------------------------------------------------------

  RECOVERYAREADESTINATION = "Z:\oradata\flash_recovery_area\".

  Am I missing something? Thank you

  Very well your log file shows

  1. [main] [20:19:46.788 IST OF 2014-05-09] Lsnr headset [NetworkUtils.getOneLocalListenerProtocolAddress:3111]
  2. [main] [20:19:46.788 IST OF 2014-05-09] [HAUtils.getCurrentOracleHome:493]  Home of the Oracle system property: C:\app\oracle\product\12.1.0\dbhome_1
  3. [main] [20:19:46.788 IST OF 2014-05-09] [CmdToolUtil. [ : 250] m_winDllLoc = C:\app\oracle\product\12.1.0\dbhome_1\bin
  4. [main] [20:19:46.788 IST OF 2014-05-09] [GETCRSHOMEUtil. [ : 93]  ToolName: getcrshome.exe - tool rental: C:\app\oracle\product\12.1.0\dbhome_1\binTool dependencies: [Ljava.lang.String;@4a53fb57 ]
  5. [Thread-18] [20:19:46.804 IST OF 2014-05-09] [StreamReader.run:61]  In StreamReader.run
  6. [Thread-17] [20:19:46.804 IST OF 2014-05-09] [StreamReader.run:61]  In StreamReader.run
  7. [main] [20:19:46.819 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:884] retval = 1
  8. [main] [20:19:46.835 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:885] exitval = 1
  9. [main] [20:19:46.835 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:886] rtErrLength = 0
  10. [main] [20:19:46.866 IST OF 2014-05-09] [CmdToolUtil.doexecuteLocally:892]  Unable to run the command. Command = env [C:\app\oracle\product\12.1.0\dbhome_1\bin\getcrshome.exe] = error = null]
  11. [main] [20:19:46.866 IST OF 2014-05-09] [HAUtils.getHASHome:1398]  Could not get at home.
  12. PRCT-1011: cannot run 'getcrshome.exe '. [Error:]
  13. [main] [20:19:46.866 IST OF 2014-05-09] BestSoFar = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)) [NetworkUtils.getOneLocalListenerProtocolAddress:3263]
  14. [main] [20:19:46.866 IST OF 2014-05-09] Host [NetworkUtils.getOneLocalListenerProtocolAddress:3276] = null hostParam = 10.94.153.35
  15. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3342] bestAddrSoFar = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.94.153.35)(PORT=1521)) return
  16. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3402]  Return bestSoFar = (ADDRESS = (PROTOCOL = TCP)(HOST=10.94.153.35) (PORT = 1521))
  17. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.getOneLocalListenerProtocolAddress:3402]  Return bestSoFar = (ADDRESS = (PROTOCOL = TCP)(HOST=10.94.153.35) (PORT = 1521))
  18. [main] [20:19:46.866 IST OF 2014-05-09] [NetworkUtils.isDefaultHostName:2793] lsnrHost: 10.94.153.35 ==> ip address: 10.94.153.35 host: oracle12c ==> ip address: 10.94.153.35
  19. [main] [20:19:46.866 IST OF 2014-05-09] Listener [NetworkUtils.getLocalListenerAddresses:1317] [0] = address of the listener = null
  20. [main] [20:19:46.866 IST OF 2014-05-09] [StepContext.setListenersToUpdate:928] needLocalListener = false

  Your listener is not configured correctly, your server is missing a valid host name or your listener is missing entries of the database...

  Well, I think you leave this parameter empty, like the YES program automatically detect the listener installed on the host computer and to configure!

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• How to enable logging in OBIEE 10 G

  I have the LDAP authentication in OBIEE 10 G and users reside only in LDAP.
  I have a requirement to enable logging for some users. Can suggest me what steps are necessary. I created the user in the RPD and activated the record for this user. Kept the same ID user in LDAP. I still don't see the newspapers.

  Given that you want to enable loglevel to few users, you have to go something similar to the below

  You block Init suppose to be like
  in case: the user to 'a ', ' b', then 2 ELSE 0 END
  the LOGLEVEL variable value

  Score pls correct/good

• Misleading message on Vista? (: "Enable logging is also accessible by...") " ? )

  Vista Home Premium

  My connection failed then I got this message:

  "The logging options are also accessible by clicking on the menu item of the preferences of the remote access UNDER the Advanced Menu OF THE network connections folder."

  If I click Start on the left corner and type in the search box to "enable journaling"... "Remote access preferences..." "The network connection file", it can be found only = no matches to your search items.

  As long as there is no "network connection folder..." I went to the "network and sharing Center" and there, we have:

  -View computers and devices

  -Connect to a network

  -Set up a connection or network

  -Manage network connections

  -Diagnose and repair

  -See also: Internet Options

  Windows Firewall

  As we can see, there is no Menu "Advanced".

  I clicked on Internet Options and went to advanced.

  There there is no "Remote Access Preferences" or "logging".

  I looked on Google and Bing:

  -They talk only about logging to start.

  Is this a misleading message?

  You don't have to use the classic view (I do not use it, I prefer the modern categories), but however you prefer will work fine.

  The menu bar (file |) Change | View | Tools | Advanced) required by pressing the ALT key to see since 2006 when Vista came out (and even all the way back to XP in Internet Explorer).  But alas, you reason - it was like 8 years old doesn't mean everyone knows as if by magic and those directives should not assume you know where is the menu.

  Also - you are not see, but you have mentioned that you are inside the "network and Internet", and you must be inside "Network connections" as my show in the picture.  They are in fact two spaces of difference.

  Here's an easy and direct way to ensure that you are in the right place:

  1. Press + R to display the race
  2. Type ncpa.cpl (that's the cammand for network connections Panel)
  3. Press OK to open the network connections folder, and then press Alt to display the menu bar with the Advanced menu.

• RESOLVED - unable to enable IPv6 in Windows 7, so unable to connect to the homegroup - ZoneAlarm was the problem

  My problem is that I can't turn on IPv6 in Windows 7.

  My goal was to set up a homegroup three computers so that I can share a printer that is connected to one of them. They are all running different versions of Windows 7.  A desktop computer has created a homegroup, and a second desktop computer connected successfully to the homegroup and can print using the first computer printer.

  The third computer is a portable computer. When you go to the homegroup settings page, it says that the homegroup is available. But this computer is unable to join when you click on the "join" button. The convenience store said IPv6 must be enabled.

  Option is checked in the IPv6 network card settings. (The install button is also active and uninstall is dimmed. I don't understand why this should be as I have read that you cannot uninstall IPv6, if it makes sense for the uninstallation to be grey, why install would be an option? Confusion between.)

  Here is what seems to be the root of the problem. In the registry settings, in the section IPv6 DisabledComponents is set to 255 (disabled). I change it to 0 (all features enabled), but I can't always connect to the homegroup. I restart the computer and the value 0 is changed back to 255.

  I can't activate IPv6, it isn't surprising that the computer cannot join the homegroup as I read that this function requires IPv6.

  Can any expert from Microsoft give me some advice on how to operate the homegroup?

  Thank you very much.

  I have now found the answer to my problem. This is a setting in the free ZoneAlarm firewall. I will describe the solution in the case of meeting other people that.

  I have the default setting of the version of ZoneAlarm is that it disables IPv6 when it starts. (I don't know if it's the same for all versions).

  Although I tried disabling ZoneAlarm (and my separate anti-virus) so he was trying to set up group residential, just turn it off has no impact on registry settings - DisabledComponents is always set at 255 until you change to 0 and, critically, restart the machine. Then, the parameter 0 (enabled) will come into force. Or so it seems to me as a layman.

  But if you did not disable the automatic startup of ZoneAlarm (like me) then as soon as you restart the computer, ZoneAlarm starts too and resets the 255, new registry entry to disable IPv6. If you can't join a homegroup.

  The solution is to open ZoneAlarm and choose firewall, hand and advanced. Then you will see the option to activate IPv6 networks. When I didn't do the notebook had no problem joined the homegroup.

  I don't know why I have the same problem on the second desktop computer. Maybe it's runnning a later version of ZoneAlarm to allow IPv6 - I haven't checked.

  In any case, I spent hours looking for this solution, so I hope that the description above helps someone else that has a parameter of the problem until a homegroup because of what seems ZoneAlarm made IPv6 settings in the registry.

• How can I enable logging in 10.11 El Capitan?

  I don't see a button in this version of disk utility.

  No more, it seems that if it has formatted OS X Extended then it is logged.

• Unable to open log cbs.log admin Vista command line

  Why findstr cannot open windir\logs\cbs\cbs.log from the administrator command prompt?

  Hello

  read this:

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

• DevCon unable to enable/disable devices in windows 7

  My initial problem is that at the start, the my device is activated by non-functional. If I disable then enable it in Device Manager, it works again. My camera's USB RF remote (remote control, Firefly). I am running Windows 7 (x 64) Home Premium with an i5 processor.

  To work around the original problem, I want to run a script using devcon. After getting the correct version of the latest Windows DDK devcon.exe, I can query the device but I can't turn it. I tried a lot of things, but I must be missing something with the use of devcon. Here is the output of devcon...

  Status of E:\dev\WinDDK\Tools\devcon\amd64>DevCon ' * VID_0BC7. "
  USB\VID_0BC7 & PID_0008\6 & 688A3B8 & 0 & 6
  Name: X 10 transceiver Wireless USB (ACPI)
  Driver is running.
  1 correspondents or the devices found.

  Disable the E:\dev\WinDDK\Tools\devcon\amd64>DevCon "* VID_0BC7."
  USB\VID_0BC7 & PID_0008\6 & 688A3B8 & 0 & 6: Disable failed
  No matching device found.

  Does anyone know why devcon does not work? Or do you know another way to toggle the Device Manager devices?

  Thank you

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is best suited for developers on MSDNt please post your question in the MSDN forum.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  You can also have a look at this link that talks about a similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/DevCon-not-working-correctly-in-Windows-7/9abcc12c-d7db-4249-AEC4-fc4ff0ea6ee8

  THIRD PARTY LINK WARNING
  WARNING: Microsoft does not provide any assurance or warranty, implied or otherwise, and is not responsible for the download, you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

• How to set up the SRI 4000-4331 to enable logging of rsyslog facilitated by using the console admin GigabitEthernet0 port

  Does not work?  Pleas advise

  Run the following on the SRI 4331.

  ntmhomes #configurer t
  Enter configuration commands, one per line. End with CNTL/Z.
  ntmhomes (config) #service timestamps log datetime localtime
  ntmhomes (config) #.
  ntmhomes (config) #.
  ntmhomes (config) #logging host 192.168.20.5
  #logging ntmhomes (config) trap inform
  ntmhomes (config) #logging trap information
  FAC #logging ntmhomes (config)
  ntmhomes (config) #logging facility local7
  ntmhomes (config) #end
  ntmhomes #.

  ntmhomes (config) #logging facility local7
  ntmhomes (config) #end

  ntmhomes #show logging
  Syslog logging: activated (0 messages fell, 11 messages limited rate, 0 flashes of heat, 0 overruns, xml disabled, filtering of persons with reduced mobility)

  No discriminator Message Active.

  No discriminator inactive Message.

  Recording console: level of debugging, 50 messages, xml, disabled,.
  filtering of persons with reduced mobility
  Monitor logging: debug, 0 messages level, xml, disabled,.
  filtering of persons with reduced mobility
  Logging buffer: level of debugging, 64 recorded messages, xml, disabled,
  filtering of persons with reduced mobility
  Exception logging: size (4096 bytes)
  County and logging messages timestamp: disabled
  Persistent logging: disabled

  No active filter module.

  Logging trap: information level, 66 lines of journaled message
  Connection to 192.168.20.5 (514, auditing disabled, udp port
  (link to top),
  5 lines of message logged,
  0 message rate lines limited.
  0 message lines a dropped-by-MD,.
  Sequence number of XML disabled, disabled
  filtering of persons with reduced mobility
  Interface-logging Source: VRF name:

  Log buffer (4096 bytes):
  g to host 192.168.20.5 port 0 CLI request Triggered
  * 9 January 17:45:27: % SYS-5-CONFIG_I: configured from the system memory
  * 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, disabled interfaces
  * 9 January 17:45:27: % IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/1, interfaces disabled
  * 9 January 17:45:27: % SPA_OIR-6-OFFLINECARD: SPA (ISR4331-3x1GE) offline in subslot 0/0
  -More-

  I think you need to tell the system that you are using the management interface

  Try

  host 192.168.20.5 record vrf Mgmt-intf

  See the link below the section on management tasks common gigabit ethernet

  http://www.Cisco.com/c/en/us/TD/docs/routers/access/4400/software/config...

• Enable logging for application Oracle MAF

  Hello

  Currently, development of a MAF application and tests on Android Simulator. Of course, I would need to view the logs so that whenever an exception occurs, I would know what who and where is the error occurring. at the level of my own application, for example, if an error occurs in a bean class.

  Can someone point me in the right direction? very much appreciated.

  Kind regards

  Oracle Jdeveloper 12.1.3.0.0

  Framework of mobile app 2.0.1.1.41.141107.1200

  Oracle ADF Mobile 12.1.3.0.41.140521.1008

  Android SDK 4.2.2

  See if this helps:

  https://docs.Oracle.com/middleware/mobile201/mobile/develop/MAF-debug-test.htm

  https://blogs.Oracle.com/Shay/entry/adf_mobile_logging_on_android

• Unable to capture logs while using parallel processing of ODI

  Hi all

  I have a requirement to run a same package at the same time in different executions. I used parallel processing in ODI by changes to the physical topology pattern and changing the km.

  Execution seems fine. But I am facing problem while capturing errors by using step sqlunload.

  I give the query as below

  Select the id of E$ _ '#V_Session' _employee

  V_Session is a variable of refreshment where I enter the session number

  employee is my target table.

  This step is to throw an error "SQL COMMAND NOT PROPERLY ENDED"

  I tried all the operator of concatenation of sets are also used, but did not work

  Any help on this is much appreciated

  Thanks in advance

  Hello

  In the module knowledge IKM, after validation transaction add a step further and place it under code command on the target tab and choose tehcnology as tool ODI

  «OdiSqlUnload "-LEADER = D:\LOG_DATA\E$ _ <%=odiRef.getSession("SESS_NO")%>.log '"-DRIVER = oracle.jdbc.OracleDriver "«-URL=jdbc:oracle:thin:@localhost:1521:XE ' '-USER = test" "-PASS = aYyaJAjLcbZAyaAiJMYtdp" "-FILE_FORMAT = VARIABLE" "-ROW_SEP = \r\n" "-DATE_FORMAT = YYYY/MM/DD hh: mm:" "-CHARSET_ENCODING = ISO8859_1" ""-XML_CHARSET_ENCODING = ISO-8859-1 "»

  Select * from E$ _ <%=snpRef.getSession("SESS_NO")%>

  Note: Change the below set values in above content

  -FILE

  -PILOT

  -URL

  USER

  PASS

  Kind regards

  Phanikanth

• Enable logging of icfcommon for ICF connector?

  I have a custom connector icf file and some of the newspapers are not displayed. In my code, I used the recorders of AGENDA and these work well, but the exit of lumberjacks icfcommon box will not work.

  Someone has used the same custom connector and managed to get the logs of icfcommon to work. When I checked the environment, I didn't see any right-handed newspaper icfcommon defined in the logging.xml.

  Here are a few logs of icfcommon I see in the oim_server1.out for this environment:

  Thread ID: 108	Time: 11-07-2013 14:53:17.057	Class: oracle.iam.connectors.icfcommon.service.oim9.OIM9Configuration	Method: getLookupMap	Level: OK	Message: Enter: Lookup.DatabaseTable.UM.ReconAttrMap
  Thread ID: 108	Time: 11-07-2013 14:53:17.066	Class: oracle.iam.connectors.icfcommon.service.oim9.OIM9Configuration	Method: getLookupMap	Level: OK	Message: return
  Thread ID: 108	Time: 11-07-2013 14:53:17.095	Class: oracle.iam.connectors.icfcommon.recon.SearchReconTask	Method: manage	Level: INFO	Message: Object with UID [534] ignored, does not change
  Thread ID: 108	Time: 11-07-2013 14:53:17.096	Class: oracle.iam.connectors.icfcommon.recon.SearchReconTask	Method: manage	Level: OK	Message: Handling of object with the UID [535]

  Is there any configuration that I need to do in order for me to see that the icfcommon connect my environment?

  I had a similar problem. In a clean environment of IOM with no patches, I received newspapers. After patched IOM to 3 Patch Bundle, the newspaper does not appear.

  It probably a bug.

• Enable logging in EM

  Experts,
  
  I use the ADF recorder in my application and I am able to see the logs on the integrated W.S. (IWS) by changing the logging level in the logging.xml file. But how to activate the same on a SWL using EM? And where will be shows logs?
  
  thnks
  Jsdev 11.1.1.5/WLS 10.3.5

  http://docs.Oracle.com/CD/E15523_01/core.1111/e10105/logs.htm

• How to find the diagnostic logging is enabled?

  Hello
  When I open a page of provider, I get a warning ' low level diagnostic logging is enabled. This may temporarily reduce performance "." Recently, I did the following
  
  Enable logging DNF using responsibility of the system administrator by setting the
  
  following profiles to the USER level.
  
  DNF: Active Log Debug = Yes
  DNF: Debug Log level statement =
  DNF: Debug Log Module = %
  
  I'm not sure of the previous value of the profile system. Is there a way to know which profile parameters have been changed?
  
  Thank you
  REDA

  Enable logging DNF using responsibility of the system administrator by setting the

  following profiles to the USER level.

  DNF: Active Log Debug = Yes
  DNF: Debug Log level statement =
  DNF: Debug Log Module = %

  I'm not sure of the previous value of the profile system. Is there a way to know which profile parameters have been changed?

  Default values are:

  DNF: Debug active Log = No.
  DNF: Debug Log level = Exception
  DNF: Debug Log Module = %

  If you want to know when these values were changed, you could get to the application (help > historical Record) or ask FND_PROFILE_OPTIONS_VL.

  Thank you
  Hussein