Deleting the photos of iOS devices and automatically delete on Mac Photos
Hello, community
So I have this minor problem with pictures on El Capitan in OS X and iOS iPhone 9. When I delete a few photos on my iPhone I also be deleted on my Mac. But, as all photos automatically appear on my Mac without be imported using cable, I have to do the work twice and delete photos first iPhone and Mac. iCloud library is disabled on all devices because I have a lot more photos to 5 GB and I don't want to buy extra space to iCloud.
I suggest that one of the features Photos photos will not be lost and etc, but of course when I want to delete the trash photos is extremely annoying to get rid of them on a device, then the other. So maybe you can help me get around this feature.
Thank you very much
Nikita
But, as all photos automatically appear on my Mac without be imported using cable, I have to do the work twice and delete photos first iPhone and Mac.
You have my Photo Stream enabled on your Mac and your iPhone? This will transfer the pictures to the library of Photos on your Mac, if my photo stream is active on both devices.
If you don't want your Photos to automatically import to your Mac, disable my photo stream on the Mac and the iPhone. Once your Mac import the photos in my photo stream, removal of the photo from camera Roll iPhone does not remove the photo of the Mac.
Tags: Mac OS & System Software
Similar Questions
-
On how can many iOS devices and computers I download creative cloud app?
On how can many iOS devices and computers I download creative cloud app?
so far, it's on an iMac, a macbook pro, an iPhone and iPad. now, it will be not downloadable on a macbook air.
Hello
See > http://helpx.adobe.com/creative-cloud/help/install-apps.html here > how many computers can I install on
I quote: you can install the software on two computers. These two computers can be Windows, Mac OS, or one each.If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it.
Hans-Günter
-
Is the app for Better Homes and Gardens Cookbook for Mac still available?
I have the app for Better Homes and Gardens Cookbook, but it works on my iPad. I want it on my Macbook Pro. How to do it?
HOW is it that so many things are available on the iPad but not on Mac computers?
You can try to contact the developers of the versions of iOS apps and ask them if they have plans to make a Mac version of them
-
can I just buy the CD for light room and Photoshop for a mac?
can I just buy the CD for light room and Photoshop for a mac?
Adobe provides no more CD.
You can download the installation files and burn your own CDs, if you wish.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I tried the license of my trial version of photoshop elements, but the download is for windows and I use a mac. Secondly, I get an error message saying that the serial numbers provided by Adobe in the received email are not correct.
Regarding the download, the correct trial version going, you should be able to manage on the link below. If you have made a purchase and bought a Windows license so it is not valid for a Mac installation. You will need to contact the Support from Adobe when they go bacvk vacation to see about getting the correct license.
You can download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html
To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Get help from cat with orders, refunds and exchanges (non - CC)
http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 ) -
How to sync contacts from iMac to iOS devices and air of Matchbox
Cannot sync contacts between the iMac, macbook air and iOS devices. All with the latest updates.
Please assoist
Tony R
You must explain what stops you to do, and what is your configuration. You have the same iCloud account connected to all devices and Macs? Do you have Contacts enabled in iCloud? Have you tried troubleshooting? If so, what have you tried?
See you soon,.
GB
-
I have LV2012 and 2013 (both 32-bit) installed on my system Win8.1 64-bit and you used without problem. I recently went through the agony of installation LV2014 32 - bit Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work. First of all, it is slow to fill the display of system information, then when I try to develop a tree I get a MAX database connection error (see table) and there is no software listed at all. Third, devices are not listed correctly even if appearing in Device Manager (eg. a CAN interface is no longer lists CAN0 but shows the device but no configuration, even for devices USB DAQ I(see attached), and I CAN installed 14.0), and there is nothing in the data area.
The first attempts to install LV2014 were prevented by the mDNS NOR answering machine and without stopping when required by Setup of services. This also affected attempts to fix the MAX.
All 3 versions of LabVIEW run OK, but projects include more distance or RIO/FPGA hardware - perhaps because of uninstalled software - but without the list of software to MAX, I can't say what is and is not installed.
I did a reset Configuration data, fixed MAX several times, uninstalled (all the all dependencies), activated the firewall and antivirus and completely reinstalled LV2012, LV2013, LV2014 and device drivers, but without touching the problem. I have now lost 2 whole days and I start to desperate for a solution. Surely this can not be the only case of this in the world.
Mike
CLD & Alliance member, UK
Hi Mike,.
The link below is what you will need to follow to remove the Corruption of database of MAX. It is a removal tool 'automate' the data removal process. . The second document below are the steps for the traverse removal tool.
MAX Database Corruption removal tool
https://decibel.NI.com/content/docs/doc-12805What is the process of removing MAX Database Corruption
http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9I highly recommend using the removal tool, as it will do this process for you, you will just need to follow the guests who come to the process.
Concerning
Mark
-
Change the partition where to downloads and automatic updates
My C partition is the main boot partition and it is full. 29G all exhausted. I copied the files of many program and pasted in the partition with 188 free G D. But it doesn't allow me to delete the original file from C to free up space. How do I do that? It says destination refused. Also, how can I change the partition of C to D that take downloads and automatic updates? I'm tired of this constant problem and I tried everything, including disk management to solve the problem. I'd appreciate a solution! Thank you
Windows Vista Help: Strategies to free disk space:
http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
Why can't the PCI 6040E under devices and Interfaces
Hello!
I intend to use a PCI 6040 E connected to a BNC 2010 to measure 3 different voltages as an entry. I installed the mx of NOR-DAQ 9.7.5 on windows 7 (64-bit). My question is why I can't see my devices under the "devices and Interfaces? even by Labview, DAQ assistant, acquire the signal, anaolge of entry... I can't configure the devices of this error: no supported devices found.
Any idea? Thank you
You're going the wrong way. The latest version of DAQmx that supports PCI-6040 is 9.5.1. See this article for more information: OR-DAQmx and NOR-DAQ Driver Support: PCI/PXI devices. And LabVIEW 2011 is the latest version of LabVIEW that supports DAQmx 9.5.1.
-
can't get the driver for pci device and sm bus controller
I have a hp laptop pavilion g6-2101tx. I recently installed the 64-bit windows 7 and I do not know what is the driver to install for pci device and sm bus controller.
The Id of your drivers are as follows
PCI\VEN_10EC & DEV_5229 & SUBSYS_1840103C & REV_01
PCI\VEN_8086 & DEV_1E22 & SUBSYS_1840103C & REV_04
Please suggest me that I have to download the driver...
Please do help me...
Hello:
Here are links to the drivers you need.
Install the driver first chipset (which in the future, you must install before installing any other driver).
Then this driver will install the card reader.
-
count the number of targets, devices and paths by hba for each host with powercli 5.5
Hi all
I'm writing this Question again in the community, was not able to found the answer I was looking for in the nets:
https://communities.VMware.com/thread/516226?start=0 & tstart = 0
https://communities.VMware.com/thread/293531
I went through the scripts provided in the community, but seems that t not work on powercli 5.5.
///
# The target account, devices and paths for each host
Get-Cluster $cluster | Get-VMHost | Sort-Object-property name. {ForEach-Object
$VMHost = $_
$VMHost | Get-VMHostHba-type FibreChannel | Sort-Object-property device | {ForEach-Object
$VMHostHba = $_
$ScsiLun = $VMHostHba | Get-ScsiLun
If {($ScsiLun)
$ScsiLunPath = $ScsiLun | Get-ScsiLunPath | `
Where-Object {$_.} Name - like "$($VMHostHba.Device) *"} ".
$Targets = ($ScsiLunPath |) »
Group-object - property SanID | Measure - Object). County
$Devices = ($ScsiLun |) Measure - Object). County
$Paths = ($ScsiLunPath |) Measure - Object). County
}
Else {}
$Targets = 0
$Devices = 0
$Paths = 0
}
$Report = "" | Select-Object - property VMHost, HBA, target devices, paths
$Report.VMHost = $VMHost.Name
$Report.HBA = $VMHostHba.Device
$Report.Targets = $Targets
$Report.Devices = $Devices
$Report.Paths = $Paths
$Report
}
}
///
I went through the script LucD posted below: but it's not exactly what I'm looking for.
LucD : can you please change the same for me please. to count the number of paths per hba for each host with powercli 5.5, devices and targets.
//
$esx = get-VMHost < host name >
foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}
$target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal
$luns = get-ScsiLun - Hba $hba - LunType 'disk '.
$nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum
Write-Host $hba. Device ' target: ' $target. County "devices:" $luns. County ' path: ' $nrPaths
}
//
I'll be grateful for any help.
Tarun Gupta
Try something like this
{foreach ($esx in Get-VMHost)
foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}
$target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal
$luns = get-ScsiLun - Hba $hba - LunType "disk" - ErrorAction SilentlyContinue
$nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum
$props [ordered] = @ {}
VMHost = $esx.name
HBA = $hba. Name
Target = $target. County
Device = $luns. County
Path = $nrPaths
}
New-object PSObject-property $props
}
}
-
Help! I finally saved enough to buy 14 elements and Prime Minister, and I made my purchase. However, I can't download them! I bought somehow WIN version and I have a Mac. What can I do?
If you have got a mac serial number, just download the mac installation files. Otherwise, http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
BlackBerry smartphones how delete all entries in the address book of device and start again
I want to delete all entries in the address book to Blackberry
I want to re - sync with my contatcs current Outlook
How do I do that?
You must do so via the Desktop Manager. I'll give you the steps using the Desktop Manager v4.5:
1. connect your BlackBerry to the computer via the USB cable and open the Desktop Manager.
2. click on backup and restore
3. click on the advanced under the section titled Advanced button
4. on the next screen, on the right, select address book, then click the button clear down.
It will delete the address book and leave it empty.
-
IPSec between an IOS device and a PIX
Hello
I'm not able to successfully establish an IPSec tunnel between an IOS (2600 router) box running 12.3 (9) and PIX501 pixos 6.2 running. I see the following error on 2600.
* 06:09:50.416 Mar 10: ISAKMP (0:1): retransmission phase 1 MM_SA_SETUP...
* 06:09:50.416 Mar 10: ISAKMP (0:1): will increment the error counter on his: broadcast
Phase 1
And on PIX501 following error message:
ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
to return to the State is IKMP_NO_ERROR
crypto_isakmp_process_block: CBC 9.8.1.2, dest 9.2.1.2
Exchange OAK_MM
ISAKMP (0): processing KE payload. Message ID = 0
ISAKMP (0): processing NONCE payload. Message ID = 0
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): Peer Remote supports dead peer detection
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): addressing another box of IOS!
ISAKMP (0): load useful treatment vendor id
ISAKMP (0): provider v6 code received xauth
to return to the State is IKMP_ERR_RETRANS
crypto_isakmp_process_block: CBC 9.8.1.2, dest 9.2.1.2
Exchange OAK_MM
I am able to ping the external interface of a box form another. Any idea what I might be missing?
Thanks in advance,
Krishna
The commands that I configured on 2600 as follows:
crypto ISAKMP policy 1
md5 hash
preshared authentication
Group 2
life 1200
cisco key crypto isakmp 9.2.1.2 address
ISAKMP crypto keepalive 50 10
!
life 1800 seconds crypto ipsec security association
!
Crypto ipsec transform-set esp - esp-sha-hmac krishnas
!
!
Krishnas 1 ipsec-isakmp crypto map
defined peer 9.2.1.2
game of transformation-krishnas
match address krishnas
!
!
!
!
interface FastEthernet0/0
IP 192.168.243.1 255.255.255.0
automatic speed
full-duplex
!
interface FastEthernet0/1
Description outside the interface to the cloud
bandwidth 10000
IP 9.8.1.2 255.255.0.0
automatic speed
Half duplex
card crypto krishnas
!
!
krishnas extended IP access list
IP 192.168.243.0 allow 0.0.0.255 192.168.244.0 0.0.0.255
The commands that I configured on PIX501:
IP 192.168.244.0 allow Access-list krishnas 255.255.255.0 192.168.243.0 255.255.255.0
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp - esp-sha-hmac krishnas
Krishnas 1 ipsec-isakmp crypto map
card crypto krishnas 1 corresponds to the krishnas address
krishnas 1 peer set 9.8.1.2 crypto card
card crypto krishnas 1 the transform-set krishnas value
krishnas outside crypto map interface
ISAKMP allows outside
ISAKMP key cisco address 9.8.1.2 netmask 255.255.255.255 No.-xauth No.-config-mode
isakmp identity = address
ISAKMP keepalive 50 10
part of pre authentication ISAKMP policy 1
of ISAKMP policy 1 encryption
ISAKMP policy 1 md5 hash
Group of ISAKMP policy 1 2
ISAKMP policy 1 life 1200
Hello Krishna
If possible and feasible to try and downgrade the IOS 12.3 (9) to a low-level code as 12.3.6. But, make sure that the image is a single k9 and supports VPN. Also upgrade the pix to 6.3.3.
Assuming that the keys are the same, your configs find ok. Him debugs it seems its not able to pass from the phase 1 properly
could contribute to modify the code.
Concerning
Wakif
-
Log in to the window - Skip connect you and automatically have the beginning of the correct username
When I start Windows XP, I now get a window with 2 user names and instructions "to begin, click the user name.
Clicking on a user name takes me on the current desktop
Clicking on the other one takes me for a desktop very, very oldI returned home without password to activate one or the other.
Is it possible to simply ignore this screen and have the correct username just start automatically?
THX
Try this:
"How to turn on automatic logon in Windows XP"
<>http://support.Microsoft.com/kb/315231 >HTH,
JW
Maybe you are looking for
-
I recently bought an all in one HP Office 23-b090 and how the system is set up it forces me to use an e-mail address with password to connect. I prefer not to use an email address. Please can someone advise how can I get around this. I also use wi
-
How to reset the password of the bios of the compaq mini cq10? error CNU0090TDJ
Please, I want to reset my cq10 bios compaq mini, but it asks the current password.
-
The use of registers at offset in a while loop that never loop
Here's a picture of 'syslog_Device function Engine.vi. This isn't really a question specifically about this vi, but rather a technique I see here. First thing I noticed, it was a while loop always outputs, never loops. And shift registers. This serve
-
Hard drive is not displayed full size
Hi all... This is my first post in the forum and hope to share details on the problem that I am facing with my portable Smart Touch PC envy. My Lptop configuration is as follows: The problem started when I went to a recovery of windows from the HP Re
-
Dual monitor (model: HP Pavilion p6-2018hk)
Hi all, my computer model is displayed under the following link. http://support.HP.com/us-en/document/c03015556 If I want to run two monitors, can support my computer or I have to insert another graphics card? Thank you!