Deletion of Volumes
I don't know that it is just an oversight on my part. How you add/remove a stored virtual machine volumes.
Thanks for the information. I don't have any other questions about this.
Tags: Dell Tech
Similar Questions
-
RN104 - problem of "Delete inactive volumes to use the disc." #27199519
I have what seems to be similar to many other questions.
I have a RN104 with two 2 TB drives using X-RAID RAID 1 (mirror). I also activated the encryption. A couple of days, we had a power outage and the ReadyNAS close.
I plugged the USB with the encryption key and he started upward but am now getting the error "delete inactive volumes to use the disk. Drive #1,2 '. And we can access is no longer the actions that have been setup on the NAS.
All the suggestions/help? We are out of the period of our support.
Just to close the loop and maybe help someone else who is having a problem, here is what he has done for me.
I end up paying for support, however ultimately my problem was that when I copied/pasted the encryption key from our secure and saved on the USB password manager, the key had a newline character hidden line the end of it (an artifact of the copy/paste from the password manager) which was originally not to be able to decrypt the volume. I had to use a hex editor to view and delete the character that is hidden at the end of the key, then my volume was fine. So, if you have the above error AND you use an encrypted volume AND you have copied/pasted your encryption key from another source to a USB key, check the key for you ensure that no character hidden inside.
I had a problem of tracking where we couldn't access or connect to one of the actions. Support has fixed this issue for me, the samba configuration file was empty, for some reason, support it repaired and we are back in business.
-
I deleted my volume control, need to reinstall
original title: VOLUME CONTROL ACCIDENTELLEMENT DELETED of NEEDS FOR RESTORING IT.
SOMEWHERE I MUST HAVE DELETED MY VOLUME CONTROL PROGRAM MY SPEAKERS ARE PLUGGED IN AND BUZZ, BUT IT IS THERE HAS NO ICON ON THE BOTTOM RIGHT OF THE CLOCK OF TIME TO ACTIVATE THE ON/OFF/UP/DOWN. IT'S BEEN ABOUT 3-4 MONTHS NOW AND I TRIED TO RESTORE MY COMPUTER BUT MY RESTORE BACK AS FAR
Hello
I suggest you try the steps from the link below and check if it helps.
Method 1: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095
Method 2: I also suggest that you install the updated drivers for the soundcard on the computer by visiting the manufacturer of the sound card and check if it works.
How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658
For your reference: Description of Notification area settings.
http://support.Microsoft.com/kb/279771
Hope this information is useful.
-
I accidentally deleted a volume in Windows 7! How can I recover the data?
I accidentally deleted a volume in Windows 7! How can I recover the data?
I created a retractable partion on "D" Drive and later to try to remove it and accidentally I clicked on "D" drive instead of the new partition! "."Any ideas to recover data?Thank youAmalHello
You can try this free program; no warranty if.
http://www.Piriform.com/Recuva
See you soon.
-
What happens in rehearsals so I delete a volume
I have a volume on my EqualLogic called HOSTA. I changed all the VMs that have been stored within their own respective volumes. HOSTA treated him also replicated offsite to another EqualLogic.
If I delete this volume, HOSTA, on the original EQL, replication will remain on the another EQL?
I would start to reproduce the new volumes and make them all over here until I have remove the HOSTA replications. But, due to bandwidth restrictions, I will have both on the same switch to EQL and perform the initial synchronization. But before that, I would like to release unused space so that I can finish the same job with another volume, called HOSTB. In this way, I can get all the initial replication completed on a single weekend.
Hello
If you remove the side volume source, it will remove the replicas. You want to pause the replication for these volumes, then permanently to promote or to clone replica. Then, it will remain until you remove them as any other volume.
Kind regards
-
Accidentally deleted a volume!
I accidentally deleted the volume for my external hard drive to the title of the disk management, and I can't understand how to make it reappear. It shows that it works correctly in Device Manager. I connect external via 1394 and am running Windows 7 x 64 Ultimate. Thank you!
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Cannot delete the volume on removable media?
I want to delete the partition on my sd card, but the Manager of the computer is not letting me. When I right click on 'delete volume' is grayed out so I can't click on it. I use windows vista. y at - it another program that will allow me to delete the partition?
Also, I tried cmd to delete the partition. It does not either.
Hello
· What happens when you try to remove from the command prompt? Error message?
· Have you tried to remove it from the disk management?
· Are you able to read/write date in SD card?
Step 1: Try to format the SD card. Back up the data before you format it.
To format the SD card tracking the steps below:
(a) right click on the secure data card and click on format.
(b) the system of files drop-down, select NTFS and click Start.
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How can I delete free volumes of vmware
So I have volumes like this: san1vol1 and san1vol2. I have all the data out of them and now they want to "remove me VMware." I'm sure it's easy, but I can't find out how to do it. Help appriaited as always, thank you!
Do you use multiple hosts? Using vCenter? What is the version of your hosts?
In any case, you can take a look at: dismantling a LUN or detachment of a unit of data warehouse/of VMware ESXi 5.x of the multiple hosts (2004605)
-
have downloaded driver detective. keep saying it is fixed, but it isn't. Cannot find this realtek audio anywhere.
Hello Dee, Dee RN,
Thank you for your message. Try to go to your computer manufacturer's website and download/install the latest audio driver for your computer.Please let us know if this or do not resolve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot delete the folder to the windows system volume information 7.
I can not delete system volume information folder in D: / E: / Windows 7
I took possession as administrator on the folder, but I can't remove it completely!
I start a command prompt and deleted some of the files it contains, but can't delete the folder!
In vista, I could eat to remove after that ownership on the folder by pressing Delete the folder will disappear!
any ideas?
don't ask me why I'm trying to delete the folder pls... I just need to
Thank you
Old post I know but I had this problem on several of my removable HDs, and finally I managed to remove the 'System Volume Information' folder:
DO NOT DO THIS ON YOUR C: DRIVE OR YOUR WINDOWS HARD DRIVE!
Right click on desktop, and then click [New-> shortcut]
Write: cmd.exeClick [next] and then click [finish]
Right click on cmd.exe icon, and then click 'run as administrator'
Now select the external hard drive (f: in my case)C:\>f:
Yes now the following (you can copy paste):
F:\>attrib s h/s/d
F:\>attrib - r/s/d
F:\>Rd "System Volume Information" / s
Are System Volume Information, you sure (Y/N)? ThereAnd you're DONE ;-)
-
Cannot delete the ghost volume
NAA.6006016003c02800dc0bc7f0b6f0e311 is a fibre channel LUN of our VNX5500 presented to our 5.1U2 7 vSphere hosts. He is identified as LUN 0 seen through the vSphere on all 7 host one Client is an empty data store.
When I remove the data store and detach the LUN it greys out as expected. I'll then the the VNX and only remove LUNS from the storage pool, which in turn deletes it hosts during a whole 'Rescan '.
Naa.6006016003c02800dc0bc7f0b6f0e311 of time disappears, a new LUN 0 naa.50060160bde00e5850060160bde00e58 appears and there is no size related and there is no new data store. If I choose 'Storage to add' this 'Phantom' volume is not available and I can take it apart and put it together, but there is nothing there and it is not really related to any real storage. It's just a ghost LUNS in vSphere.
If I add the real naa.600... LUN to the storage pool, naa.500 disappears and LUN 0 reflects correctly again with naa.600... identifier. I remove again and LUN 0 becomes naa.500... identifier again.
I want two-pass, but I can't get rid of naa.500... little matter what I try.
In the game there is no DTS or SIOC.
I restarted management, but also a restart services.sh officers when none of those who have worked I reloaded 1 host but it has not yet remove the ghost LUNS.
I did all the tricks of esxcli I can find related to the deletion of volumes. More funny thing is when I run the command to take it apart, put on 'off' etc, the gray naa.500 of volume in the customer and orders are successful. Then I run the actual delete command and it is running successfully within the CLI, but if you look at the GUI, naa.500... which was gray becomes active (not grayed out) within a period of a few seconds after the removal of the CLI.
Whack how?
I suspect it's something behind of a volume that no longer exists and probably did not exist for a long time, but who was not properly removed when he was abducted.
Someone has suggestions for how to get rid of this volume mysterious ghost?
It is by design with multiple EMC storage systems. Unless you present a LUN with a 0 host ID, you will see the LUN of 'management' (which is not a disk device) as LUN 0 on the host.
André
-
There is no volume after restarting the device. Need urgent help
Hello.
Our ReadyNAS RN31600 iSCSI target device. We have (had) two LUNS of 8 terabytes each built on X - RAID 5, which are presented on a Windows Server.
This device is less than a year, and he began to have problems today. First two LUNS disappeared from the iSCSI (WS 2008 R2) client. When we tried to restart the NAS server, he's hanging on "restart now, see you soon."
We power off of the switch and after restarting, two LUNS seem to have disappeared, and the unit is empty somehow? How to solve this problem? Or is it quite normal on the Netgear devices to suddenly lose 16 terabytes of data?
The GUI shows "there is no volume" and also "delete inactive volumes using disk. Disc # 1,2,3,4,5,6 ". This means that all the disks.
Firmware is 6.4.0.
And no, we don't have backups, because this device is used to a backup unit.
I suggest you to contact support (support.netgear.com), because I think it will be faster than from here.
-
Deleting a disk and Re assign disk space
They gave me a laptop Acer Aspire 3680 running on Vista. 80 GB HDD space is also divided a, C and D drive. Both drives are formatted NFTS. D drive has a folder labeled "Program Data". It is empty. When I go to disk management, click with the right button on the D drive, the drop down menu a 'remove' grayed. How can I remove the D drive and re assign disk space on drive C?
Hello
What is the complete the situation under the D drive in disk management?
Your D: drive is normally the recovery Partition that the manufacturer has put there for your computer to put it back to factory in the event of a system crash.
Contact the manufacturer of your computer on how to remove everything you have saved on the recovery disk because it is their recovery Partition.
You can try to format the drive, then try to delete the volume. Check if this is useful.
Note: Before formatting the drive D: is it advisable to check with your computer manufacturer.
Contact the manufacturer of your computer about how to remove anything on recovery drive, as is the recovery Partition.
Delete a hard disk partition
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-a-hard-disk-partition -
System Volume Information in Windows Vista Ultimate Edition.
System Volume Information continues to increase in size, but there are now a lot as a "separate partition" on my hard drive. It seems to be totally fraggled, but do not defragment when I defragment the hard drive. It grows to 0.5-1.0 GB everytime I clean up/defragment my hard drive. How can I delete System Volume Information and stop what is happening in the future? Is it safe to delete?
Thank you, Len.
Try this link: http://www.vista4beginners.com/System-Restore-Space-Used - John ( http://www.carrona.org/index.html )
-
move volumes of storage of 2 controller controller 1
Hi guys,.
I want to pass some volumes through to the other controller to redistribute space, as everything on controller 2 is to complete research.
What is the best way to move overall, then the data on the disks of controller 1?
Controller 1:
There are 2 ways for this survey:
1. license replicate if you can replicate a volume of Compellent to Compellent 1 2, and then delete on 2 Compellent in order to free up space.
2. choose 1 2 Compellent volume which should be move free space - we call it as Volumea. Create volumes on 1 Compellent, onto a server (which has the Volumea). Data copy of its new volume (copy OS level). Remove the Volumea on 2 Compellent.
You can also expire the replay, delete any volume of United Nations-use on 2 Compellent.
Rgds,
Maybe you are looking for
-
How to access the BIOS on Satellite C series
Hello everyone:We try to download the Version of the OS on the Satellite C (for W7 W8).How can access us the BIOS?We are an impulse the F3 key during the loading process, but it does not work.Thank you very much
-
changed my homepage. He hates. Want to return ex-
Changed the content of my google facepage. I hate it and my old one back. I have no idea how to do it. Help please
-
Satellite U400 - color of the shell of edges and slow start of the housing
Hi all Just bought a Satellite U400-15B and am loving the laptop itself but have the following two issues. First of all, regarding the case I noticed that on the edge of the high gloss base (where he meets the not shiny black plastic bottom) the pain
-
want to 4500 A9T80A: wireless printing
Hello I want 4500 all-in-one series printer. Model A9T80A. I am connected to the internet. My wireless switch is turned on (on the printer). I can print from my computer (i.e. documents saved on my computer). When I go to print from the internet, I h
-
I can't print from my inspiron 1525, but I can from my office...
I can't print from my laptop, but I can from my office. He says that the problem is conectivity, but appears not to be the problem. What can I do?