Dell 1720DN on Yosemite OSX reference works do not

Similar Questions

• Dell PowerConnect 2724 managed Mode reference works do not?

  I recently acquired a dell powerconnect 2724 from a friend, and I can't find the web interface. I tried the default IP addresses and I looked on an application to register all IP addresses on the network, and the thing only dell was my PowerEdge R710. I made sure it was in managed mode and I tried to reset it. Suggestions?

  From the factory, the PowerConnect 2708/2716/2724 units have a default IP 192.168.2.1 255.255.255.0 assigned. This IP address is assigned to the management VLAN 1. Be sure not to delete the VLAN 1 management or you will not be able to manage the switch. If the switch is unmanageable, and then change the transition to unmanaged and return to managed mode to reset the default settings.

  Remember that the client attempts to access the switch is also in the 192.168.2.0 subnet. If the customer is not in the same subnet, it will be able to access the 192.168.2.1 IP address. Check and make sure that nothing else on the network also has 192.168.2.1 assigned.

  Keep us informed.

• Dell PowerConnect 6248 10 GB ports reference works do not

  Hello

  We have recently installed a module SFP + (part # c107d) in our Dell PowerConnect 6248 switch. The switch does not seem to see the module because before install us the plug-in, it showed a port xg3 xg4, and after the addition of the module, it shows that these ports.

  So I have a few questions:

  Is the SFP + above compatible with this model of switch?

  If so, how can verify us that the ports are active?

  Here is the result of the port details:

  #show interface ethernet 1/xg3 in detail

  Port Type Duplex speed Neg Admin link

  A State

  -----  ------------------------------  ------  -------  ----  -----  -----

  1/xg3 10G - level s/o unknown Auto Up Down

  Port description

  ----  --------------------------------------------------------------------------

  1/xg3

  Flow control: enabled

  Port: 1/xg3

  Belonging to a VLAN: access mode Mode

  Operating parameters:

  PVID: 1

  Capture filtering: enabled

  Acceptable frame type: no label

  Default priority: 0

  GVRP status: Disabled

  Protected: disabled

  -Other - or ITU (q)

  Port 1/xg3 is a member of:

  Rule of VLAN name evacuation Type

  ----    --------------------------------- -----------   --------

  1 by default not marked by default

  Static configuration:

  PVID: 1

  Capture filtering: enabled

  Acceptable frame type: no label

  Port 1/xg3 is configured statically:

  Output name rule of VLAN

  ----    --------------------------------- -----------

  Prohibition of VLAN:

  Name of VLAN

  ----    ---------------------------------

  Port 1/xg3 Enabled

  Status: Disabled role: disabled

  -Other - or ITU (q)

  Identification of the port: 128.51 shipping cost: 0

  Fast port: No. (configured: no) root Protection: No.

  Designated the bridge priority: 32768 address: 80:00:00:25:64:19:92:1 C

  Identification of the designated port: 0.0 cost of access road designated: 0

  Root regional CSE: 80:00:00:25:64:19:92:1 C CSE Port cost: 0

  BPDU: 0 sent, received 0

  Yes, this module is listed as compatible with the switch. It seems that you install in Bay 2? He may have listed these ports but they probably do not appear as active. Have you tried to make a connection with ports?

• Dell Webcam integrated reference works do not for Windows Vista in Inspiron 1525

  The Dell Inspiron 1525, I bought new 2.5 years ago.  When I got the laptop, I tried to use the webcam, but it did not work.  It shows only a screen black when the webcam running rather than capture images.  I try once more to use the webcam, and it still does not work.  Any ideas?

  Hello

  ·         Do you have a CD of the software with the laptop when you bought it new?

  You may need to install the updated release of the request for the webcam and check if that helps you to use the webcam.

  Download utilities system for the portable computer from the link below and check if that helps.

  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=INS_PNT_PM_1525&hidos=WLH&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell 5737 MaxxAudio 4 reference works is not in Windows 10

  I installed my windows to windows 10 and now the audio sounds very different. When I clicked on the Audio from Dell settings I can't access to the setting MaxxAudio 4. How to solve this problem?

  Sorry I forgot to tell you that you need to download the Realtek card reader also. Then go into Device Manager and update drivers. I had to uninstall Realtek High-Definition Audio Driver 2 times, but now it works.  The first link is the Realtek card reader and the second Realtek High definition Audio driver. Stay in touch www.dell.com/.../DriversDetails

• Dell webcam central reference works do not.

  I have a computer dell laptop with a built-in webcam that doesn't work anymore. I have Windows 7. Everytime I open Dell Webcam Central it says "please connect a device supported", I don't know what the problem is and I can't find the webcam on device manager on my computer. It is not under what it is. Under USB controllers, but there was something that said device unknown and I uninstalled it to see if that would do anything, but no change. Please help, thanks.

  Hello

  No, you can either get the only fixed internal and if this cannot be done so using an Add - on camera.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Narrow ARM of SPI VI reference works do not for me LabVIEW 2009.

  I use LabVIEW 2009 Embedded for ARM in collaboration with the Council of development of LM3S8962 and the MCP3008 10 - bit ADC chip. I'm trying to use the base screws of SPI to communicate with the MCP3008 - see the attached excerpt from VI to my current attempt. I can initialize the SPI reference, read two bytes of data from the ADC, but when I try to close the reference, the application crashes. If I am the narrow ARM of SPI reference VI in a diagram to disable, the program terminates normally, and I get to see my two bytes of data printed on the OLED. Any ideas?

  Thanks in advance,

  Stuart

  Thank you!

  Who takes care of the immediate problem. I really appreciated the quick response!

  Stuart

• Display of stand-alone ActionScript 3.0 language reference works do not

  I am unable to see the majority of the standalone downloadable version of the ActionScript 3.0 language reference.

  The document in question: http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/standalone.zip

  (link caught in http://www.adobe.com/devnet/actionscript/references.html()

  To replicate:

  1) download the file of http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/standalone.zip.

  (2) expand the zip file, open the folder that results and open the index.html document in your web browser.

  (3) choose any filter link you want from the options on this page. Note that packet filters and the class in the header display constantly "getting data from server...". »

  4) click the Classes link in the header at the top.

  Result: The list of class displays only momentarily, and then mask completely.

  It would be great if there was a way around the filters entirely. There seems to be several missing items in the download, for example en_US/shared/ahpods/AHPod.js.

  I'd settle for a PDF of all-in-one of the reference.

  Difficulty of Joe... Ward on wire http://forums.adobe.com/message/3958537#3958537 :

  Unzip the reference in a folder named "langref" - there is a bug in the Javascript code that filters the contents of the page based on your selections (in these controls that say 'retrieve data from the server... »). The code looks really like a folder named «langref» (I'm sure that the engineer who did this thought that it was a quick hack that he or she could clean it up right now...)

  Thank you!

• JQuery UI reference works do not

  I tried to integrate the widget menu jquery UI in an application today and have a bit of trouble. I read the documentation here http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/app_comp001.htm#HTMDB29030 and followed these instructions of the documentation to include the menu widget (replacing the 'menu' to 'tab' below):

  <link href="#IMAGE_PREFIX#libraries/jquery-ui/1.8.22/themes/base/minified/jquery.ui.tabs.min.css" rel="stylesheet" type="text/css" />
  <script src="#IMAGE_PREFIX#libraries/jquery-ui/1.8.22/ui/minified/jquery.ui.tabs.min.js" type="text/javascript"></script>
  

  When I run the page I get 404 errors for these two files. Any ideas why these files are not be found?

  Earl

  jQueryUI Menu Widget is not a part of version 1.8. See the relevant documentation 1.8: Widgets: jQuery UI 1.8 Documentation

  When you go to jQuery UI , you'll always see the latest version, which would be 1.10.

  Another way to inspect what you have available in the apex is simply download the apex installation files. You can view all of the pictures folder and its contents in it - and that's the biggest part of the download anyway. I keep a download with me all the time – quick and easy.

  Use the menu on apex.oracle.com, you need to include the libraries jwho of a CDN or by downloading the files to static files of the apex under shared components and add the relevant links on the page.

• Dell local security backup has stpped working help please

  I tried to connect to a new website, I am trying to build, using my laptop instead of the family computer. It was because I had access a.net framework of problem a few days ago. So, I got the message that the Dell data safe local backup stopped working.  And to communicate with Windows. I was directed to do my own research through some links, including this forum. I would be grateful if someone can help me solve this problem. Thank you.

  Hello

  If you have problems with "Dell DataSafe Local Backup" so you will have to contact Dell.

  It is their software:

  "What is Dell DataSafe Local Backup 2.0?"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266281

  You can try their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• "Dell WLAN Network Card" has stopped working

  Windows gives me a message that "Dell WLAN Network Card" has stopped working. It is a common problem and is there a solution?

  PS: Is alternative medium n to go to the uninstall step (your step 2)? I don't have the "Run" command in the start menu. It is a Dell laptop, Inspiron with Windows Vista Home version.

  Thank you

  If you have a key of Windows on your keyboard, press Windows + R

  Otherwise, right click on start > properties > customize > Advanced tab > scroll down to the list of "items on the start menu" until you get on 'Run' > check the box "Run" and OK your way out.

  If you use the "Start menu classic", it is not "Advanced" tab and the check box command run figure in the list 'Advanced options from the start menu.

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• Microsoft Windows error message: "Dell DataSafe 2.0 has stopped working".

  On my new laptop purchased recently, I get an error message from Microsoft Windows: "Dell DataSafe 2.0 has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "I then select the" close program"button to close the message.  But, no info additional re: a solution is always provided and within a few seconds the error message recurs, repeatedly.  It's maddening, it goes without saying.  My DataSafe account is current and operational.  I can't find any info on the site of Dell re support: this error, probably because it's a message of Windows...?

  But it's a Dell software!
  You look at not only their website, contact you them directly.

  Contact Dell: http://support.dell.com/

  See you soon. Mick Murphy - Microsoft partner

• Dell 1720dn printer, how do I reset to DHCP for IP fixed

  I have a Dell 1720dn printer connected as a network suspended my modem/router printer and with a fixed IP address.

  I changed just my ISP and don't have a fixed IP and therefore need to change my printer to enable DHCP.

  I see no way to do another that uninstalling and reinstalling the printer... or am I missing something?

  Thank you for any halp

  If you always access the printer web server you can change the DHCP IP address in network settings. Otherwise I would try a factory reset the printer and it should return to the DHCP:

  Turn the printer off

  Open the access cover to the printer

  While you press and hold the continue and cancel re - turn on the printer

  NOTE: the lights will be put a few times

  After the error light turns on and stays on

  Release the continue and Cancel buttons

  Close the access cover

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/